How to use Troubleshoot-DatabaseSpace.ps1
Exchange 2010 sp3, mb01, mb02. hub01, hub02. off-site cas/mb/hub server
all I need is a way to tell me if 10GB/day is normal disk consumption. but when I read the documentation for
Troubleshoot-DatabaseSpace.ps1, it says something that it will quarantine users who exceed a certain threshold.
is there a way to run the script to just tell me if my db growth is normal or not?
Hi,
After all factors have been considered and calculated, we recommend that you include an additional overhead factor of 20 percent for the database logical unit number (LUN). This value accounts
for the other data that resides in the database that isn't necessarily seen when calculating mailbox sizes and white space.
Thanks,
Simon Wu
TechNet Community Support
Similar Messages
-
Hi,
Exchange 2010 MP fails to run Troubleshoot-DatabaseSpace.ps1. Results in a Warning with "Error formatting a string: Format string is not supported". The EventNumber is 402. The Microsoft article it points to is useless at http://technet.microsoft.com/en-us/library/749e0eac-ebb2-41e3-8fa2-4a03a1bd3571.aspx
Run ".\Troubleshoot-DatabaseSpace.ps1 -Server MailboxServer.domain.com -MonitoringContext" and works fine.
Any help appreciated.
thanksHi,
Before the newer MP release, we can disable these 4 monitor via override and this should not run the Troubleshoot-DatabaseSpace.ps1 :
KHI: Failed to execute Troubleshoot-DatabaseSpace.ps1.
KHI: The database copy is low on database volume space and continues to grow. The volume is under 25% free
KHI: The database copy is low on database volume space and continues to grow. The volume has reached error levels under 16% free.
KHI: The database copy is low on database volume space and continues to grow. The volume has reached critical levels 8% free.
Alex Zhao
TechNet Community Support -
I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark -
My iPhoto starts up and freezes. I have tried rebuilding and using iPhoto Library Manager. I have an iMac running 10.7.3. It was working before recent updates by Apple. How can I troubleshoot?
Thank you. Might be a bit more than 50 but close.
Date/Time: 2012-04-09 12:46:07 -0400
OS Version: 10.7.3 (Build 11D50d)
Architecture: x86_64
Report Version: 9
Command: iPhoto
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Version: 8.1.2 (8.1.2)
Build Version: 8
Project Name: iPhotoProject
Source Version: 4240000
Parent: launchd [142]
PID: 980
Event: hang
Duration: 1.81s
Steps: 19 (100ms sampling interval)
Pageins: 0
Pageouts: 0
Process: iPhoto [980]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Architecture: i386
UID: 502
Thread 0x50630
User stack:
19 ??? (in iPhoto) [0x3172]
19 ??? (in iPhoto) [0x124b80]
19 NSApplicationMain + 1054 (in AppKit) [0x9c5eb261]
19 -[NSApplication run] + 911 (in AppKit) [0x9c357675]
19 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113 (in AppKit) [0x9c35b306]
19 _DPSNextEvent + 678 (in AppKit) [0x9c35ba9c]
19 BlockUntilNextEventMatchingListInMode + 88 (in HIToolbox) [0x90129356]
19 ReceiveNextEventCommon + 381 (in HIToolbox) [0x901294e7]
19 RunCurrentEventLoopInMode + 318 (in HIToolbox) [0x9012217f]
19 CFRunLoopRunInMode + 120 (in CoreFoundation) [0x99dce328]
19 CFRunLoopRunSpecific + 332 (in CoreFoundation) [0x99dce47c]
19 __CFRunLoopRun + 1112 (in CoreFoundation) [0x99dcec68]
19 __CFRunLoopDoSources0 + 246 (in CoreFoundation) [0x99da4d96]
19 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15 (in CoreFoundation) [0x99da53df]
19 __NSThreadPerformPerform + 503 (in Foundation) [0x9ac96e40]
19 -[NSObject performSelector:withObject:] + 65 (in CoreFoundation) [0x99e2dde1]
19 ??? (in iPhoto) [0x50792e]
19 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92 (in Foundation) [0x9ac45012]
19 _CFXNotificationPost + 2776 (in CoreFoundation) [0x99de3a38]
19 ___CFXNotificationPost_block_invoke_1 + 275 (in CoreFoundation) [0x99e18cb3]
19 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49 (in Foundation) [0x9ac59e25]
19 ??? (in iPhoto) [0x5c2a86]
19 -[NSLock lock] + 185 (in Foundation) [0x9ac4c826]
19 __psynch_mutexwait + 10 (in libsystem_kernel.dylib) [0x93b74876]
Kernel stack:
19 hndl_unix_scall + 281 (in mach_kernel) [0xffffff80002d7f39]
19 unix_syscall + 472 (in mach_kernel) [0xffffff80005ca448]
19 psynch_mutexwait + 1403 (in mach_kernel) [0xffffff80005a043b]
19 ksyn_block_thread_locked + 67 (in mach_kernel) [0xffffff800059a7d3]
19 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f39b]
19 thread_continue + 1661 (in mach_kernel) [0xffffff800022f11d]
19 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c0939] -
I have been using safari on a pretty old Dell with Windows XP. I use it mainly to access email on google. Suddenly I cannot get into my emails and there
are no error messages. How should I troubleshoot this problem? Also, safari is an older version - should I upgrade it?Safari for Windows was discontinued a long time ago. It has bugs that will never be fixed, and it should no longer be used.
-
How to use iCloud with my family's devices
We're an Apple household with two Apple-using parents and three Apple-using kids. We have two iPads, two iPod Touches, two iPhones and a MacBook Pro.
Up unti now, I have used all of the devices with the same Apple ID, except for my wife's iPhone and MacBook, which use a different account because I'd purchased a MobileMe account so that her address book and calendar would sync. My iPhone, on the other hand, belongs to my company and data is sync'ed using Exchange, but the AppleID is still mine, there are no special corproate controls, and the Apple ID and apps I purchase belong to me.
Should I simply migrate my wife to my AppleID, and use iCloud to sync her phone with the MacBook Pro, and leave everything else as-is? Then we will have a single AppleID for everything, and her Calendar and Address book will sync between her two devices, and FindMyiPhone will find everything with a single login? Are there any limits with using all of these iDevices on a single account?
Thanks!iCloud: Backup and restore overview
http://support.apple.com/kb/HT4859
Check iCloud storage & backup space on iPad
http://www.urltips.net/check-icloud-storage-backup-space-on-ipad/336/
iCloud: Troubleshooting creating backups
http://support.apple.com/kb/TS3992
FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
How to use the same email address for outgoing email on two iPads?
How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1
Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H. -
How to use the "identify" feature in new 6.3.1 airport utility?
how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this. -
How to use Terminal with KeySpan USB serial adaptor cable?
I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason SjobeckHi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
How to use same page fragment more than once in a page,
Hi Gurus,
How to use same page fragment more than once in a page. I have a complex page fragment which has lots of Bindings (Binding Property set with backingBean variables).
I want to use the same page fragment multiple times on the same page with different tabs.
I want different ApplicationModule Instance for the page fragment in different tabs.
So I have created a Bounded Taskflow with pagefragments which has this complex pagefragment.
I've dragged the taskflow to page and created regions.
I'm able to execute the page successfully when I have only one region but fails if I have region more than once in the page.
Can anyone help me how to resolve this issue.
Web User Interface Developer's Guide for Oracle Application Development Framework: section 19-2 states we can have same pagefragment more than once in a page.
Thanks,
Satyajava.lang.IllegalStateException: Duplicate component id: 'pt1:r1:0:t2:si5', first used in tag: 'com.sun.faces.taglib.jsf_core.SelectItemsTag'
+id: j_id_id1
type: javax.faces.component.UIViewRoot@1d23189
+id: d1
type: RichDocument[UIXFacesBeanImpl, id=d1]
+id: j_id_id5
type: HtmlScript[UIXFacesBeanImpl, id=j_id_id5]
+id: j_id0
type: javax.faces.component.html.HtmlOutputText@bc252
+id: m1
type: RichMessages[UINodeFacesBean, id=m1]
+id: f1
type: RichForm[UIXFacesBeanImpl, id=f1]
+id: pt1
type: RichPageTemplate[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@2a0cc, id=pt1]
+id: ps1
type: RichPanelSplitter[UIXFacesBeanImpl, id=ps1]
+id: pt3
at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1199)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag265(__projectrevenuern_jsff.java:12356)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag264(__projectrevenuern_jsff.java:12317)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag263(__projectrevenuern_jsff.java:12262)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag262(__projectrevenuern_jsff.java:12200)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag261(__projectrevenuern_jsff.java:12147)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag260(__projectrevenuern_jsff.java:12099)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag259(__projectrevenuern_jsff.java:12047)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag258(__projectrevenuern_jsff.java:11992)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag257(__projectrevenuern_jsff.java:11948)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag255(__projectrevenuern_jsff.java:11860)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag254(__projectrevenuern_jsff.java:11808)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag9(__projectrevenuern_jsff.java:510)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag8(__projectrevenuern_jsff.java:461)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag1(__projectrevenuern_jsff.java:149)
at jsp_servlet.__projectrevenuern_jsff._jspService(__projectrevenuern_jsff.java:67)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:443)
at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:492)
at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag50(__projectrevenuepg_jspx.java:2392)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag49(__projectrevenuepg_jspx.java:2353)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag46(__projectrevenuepg_jspx.java:2209)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag45(__projectrevenuepg_jspx.java:2162)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag9(__projectrevenuepg_jspx.java:526)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag8(__projectrevenuepg_jspx.java:475)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag7(__projectrevenuepg_jspx.java:424)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag6(__projectrevenuepg_jspx.java:373)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag2(__projectrevenuepg_jspx.java:202)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag1(__projectrevenuepg_jspx.java:144)
at jsp_servlet.__projectrevenuepg_jspx._jspService(__projectrevenuepg_jspx.java:71)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = CAMIND1 TXID = CONTEXTID = TIMESTAMP = 1262712477691
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
set base C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
set homepath diag\ofm\defaultdomain\defaultserver
create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2010-01-05 12:27:58.155 -05:00" ecid="0000INzXpbB7u1MLqMS4yY1BGrHn00000K"
Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
... 19 moreI get the above Error.
I have checked the bindings and it has 2 instances of the taskflow.
I have changed the backingbean scope to backingBean -
How to Use a System Repair Disc to Restore Windows 7
Hi ! Please start here!
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
http://forums.toshiba.com/t5/Computer-Troubleshooting/What-can-I-do-if-my-Windows-7-or-Windows-Vista...
http://forums.toshiba.com/t5/Windows-8-Knowledge-Base/What-can-I-do-if-my-Windows-8-laptop-won-t-sta...
http://pcsupport.about.com/od/toolsofthetrade/ss/windows-7-startup-repair_2.htm
PS Please read all these links and then post back here with your complete model number found on the bottom of your laptop and complete information to what you have tried to get your PC working I would love to spoon feed everyone. It's just not possible.
Dokie!!
PS2 Now read this and see if any thing here helps.
http://forums.toshiba.com/t5/Computer-Troubleshooting/FYI-Recovery-to-Factory-Settings-Toshiba/td-p/...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture40.JPG 238 KBHi! I found this on the form!
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/How-To-Understanding-System-Recovery-Optio...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward. -
In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
Child Group: CalendarYear
Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes Value: Yes
Label: No Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
Child Group: CalendarYear
Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes Value: Yes
Label: No Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012 -
My Apple tv status light is blinking fast - how do I troubleshoot?
my Apple TV gen 2 status light is blinking fast and I am not able to see anything from my Apple TV - how do I troubleshoot? What I read on the Apple site is that my Apple TV has issues. My Apple TV is hard wired to my Ethernet network. It is connected to my TV using an HDMI cable. It worked in the past but when I turned it on today it did not work. I have not used it in several months and we had a bad thunderstorm here a couple weeks ago.
I'm having the same problems as you. Any solutions? This is what i'm facing
1. No video signal at all
2. Plugged in power cable only, there is no light
3. Plugged in micro usb, there is flashing light
4. Restore via iTunes is sucessful but problem still persists -
How to use bapi response in XI
HI ALL,
Can any one suggest me, how to use bapi response in XI as a sender.
I m using bapi BAPI_BCA_BANKSTATEMENT_EXECUTE , I am executing this bapi manually ,but want to use this BAPI RESPONSE in XI as a sender and map it with receiver.
can i have any idea about how to do it, or can i have the idoc which is used by this bapi BAPI_BCA_BANKSTATEMENT_EXECUTE.
THANX
HONEYHi Honey,
Have a look at these
-Configuring the Sender RFC Adapter - step by step
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
-Troubleshooting - RFC and SOAP scenarios
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
-sender RFC (forum thread)
Is it possible to use the RFC sender adapter for asynchronous calls?
Regards,
Sreenivas -
How to create the servlet as acontroller and how to use it
how to create the servlet as acontroller and how to use it
>
John
Please update your forum profile with a real handle instead of "914824".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I am going to have over 50 buttons in a page, Why? This would be a most unusual UI paradigm. I've never seen such a page, which suggests that whatever you want to do is normally done another way. Please explain the requirement in more detail.
just wanted to know if its possible to do something like this in java.
Java is not used in programming APEX UI behaviour. Java and JavaScript may share initial syllables, but they are not closely related.
It's possible to achieve a great deal in JavaScript, but a clear definition of the requirements is necessary. Do you mean the buttons should be dynamically generated? If so, yes, this is possible in JavaScript. What would drive the process?
Also, i would like to have dynamic action on it, for example, when the button is pressed, fill a string of text into other items(text field) within the page. Without more detail its not possible to make any specific suggestions. For example, I certainly would not want to create 50+ individual dynamic actions relating to different buttons.
Maybe you are looking for
-
Photoshop 2014 Program Error in text
I am currently using photoshop CC 2014. And sometimes when I am tying text, or copy/pasting text into the PSD file, an message would pop up that I "Could not complete your request because of a program error" After which, I would be totally unable to
-
[CUPS] Unable to set my new CUPS server with an HP printer (solved)
Hello, I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux .
-
Looking for a good guestbook!
Hello. Anyone know of a good guest book component that uses flash and/or cold fusion. The only good ones I can find are with php. :( I don't want to use php. I bought a decent one last year from cfmagic but the evil spam people destroyed my guest boo
-
after upgrading my iphone ios from 5.1.1 to 6.0 wverythings seems to work fine. until today i was using my wi-fi network to download an application and suddenly wi-fi tirned off and when i went to the settings i cannot click on (on/off) wi-fi) it is
-
I am able to burn CD's and play them on my computer but not in my car? I don't understand. I have burned CD's before and they have worked but now they seem to not work in other players. Any thoughts out there?