How to use upgrade for primary number on another number

The primary phone on our family contract is eligible for an early upgrade now but we want to upgrade the other phone. Can this be done online or must I go to a Verizon store to do the switch?
As an aside, I want a smartphone so I can have a single device rather than a phone + Palm Pilot. I'm not really interested in a data plan, but it is required for a smartphone. Having read some of the postings, I know I'm not the only one annoyed by the requirement to have a data plan with a smartphone.

orchid wrote:
The primary phone on our family contract is eligible for an early upgrade now but we want to upgrade the other phone. Can this be done online or must I go to a Verizon store to do the switch? To use your annual upgrade, the easiest way will be to just upgrade as normal online or over the phone. When the new phone arrives, activate it briefly on the primary line following the instructions included with the phone. Once it's activated, you will have accepted the terms of your new contract, and you can re-activate the phone that was previously on that line by dialing *228 and selecting option 1 from the old phone. The new phone will now be available to activate on any Verizon line you would like.
As an aside, I want a smartphone so I can have a single device rather than a phone + Palm Pilot. I'm not really interested in a data plan, but it is required for a smartphone. Having read some of the postings, I know I'm not the only one annoyed by the requirement to have a data plan with a smartphone. Yes, it is annoying. There's nothing you can do to get away from it though, so you'll just have to decide if carrying one device is worth the premium of a $15 or $29.99 monthly data fee.

Similar Messages

How to use PropertyChangeSupport for a bean from another bean

Hi all,
I have a bean A that doesnot implements the PropertyChangeListener or have a PropertyChangeSupport as one of its member and I cant change its design. I want to fire an PropertyChangeEvent when a property is changed. I added A to PropertyChangeSupport of another bean B. The problem is that even if the Property of Bean A is changed it doesnot fire a event. Can anybody let me know how to do it?
Thanks,
Amit

You need to wrap bean A inside another bean (B) that
implements the accessor and mutator methods of Bean A
and adds property change support in those methods
where appropriate. You hide the actual instance of
bean A inside an instance of bean B so no instances of
bean A are visible to the application.This is OK, unless you don't want to change all places where A is referenced. You could subclass B from A, as long as the accessor and mutator methods are not final. Of course, instantation still has to know about B and you will have to cast to B, or use reflection, to add and remove the listeners.

How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split

Hi Experts, I have the follow delivery:
Item        Material   Deliv.Qty    Un
10     739911     2     PQT
And I want to obtain this:
Item        Material   Deliv.Qty    Un                            Batch
10     739911     0     PQT
900001     739911     1     PQT          ZZ00060
900002     739911     1     PQT          ZZ00061
But, after using the Bapi I obtained this:
Item        Material   Deliv.Qty    Un                            Batch
10     739911     1,372     PQT
900001     739911     0,314     PQT          ZZ00060
900002     739911     0,314     PQT          ZZ00061
So as you can see the problem is with the "Deliv.Qty". I expected:
Item        Deliv.Qty
10            0
900001     1
900002     1
But I obtained:
Item        Deliv.Qty
10     1,372
900001     0,314
900002     0,314
The parameters that I am using in the Bapi are:
HEADER_DATA
DELIV_NUMB = 801174646
HEADER_CONTROL
DELIV_NUMB = 801174646
DELIVERY = 801174646
TECHN_CONTROL
UPD_IND = U
ITEM_DATA (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
MATERIAL = 739911
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
MATERIAL = 739911
BATCH = ZZ00060
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
MATERIAL = 739911
BATCH = ZZ00061
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
ITEM_CONTROL (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
CHG_DELQTY = X
So I am missing something but I don't know what.
Can any one help me with this please?
PD: I have looked the following forums in order to use the Bapi:
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
batch split using BAPI_OUTB_DELIVERY_CHANGE
Re: Help in BAPI_OUTB_DELIVERY_CHANGE(batch-split)
BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
Help for BAPI_OUTB_DELIVERY_CHANGE

Hey,
My code is for the inbound delivery but it should work the same.
Give this a try.
REPORT z_delivery_batch_split.
DATA:header_data LIKE bapiibdlvhdrchg,
header_control LIKE bapiibdlvhdrctrlchg,
delivery LIKE bapiibdlvhdrchg-deliv_numb,
ls_return LIKE bapiret2,
item_data TYPE TABLE OF bapiibdlvitemchg,
item_control TYPE TABLE OF bapiibdlvitemctrlchg,
ls_item_data LIKE bapiibdlvitemchg,
ls_item_control LIKE bapiibdlvitemctrlchg,
return TYPE TABLE OF bapiret2 WITH NON-UNIQUE KEY type.
header_data-deliv_numb = '1800005005'.
header_control-deliv_numb = '1800005005'.
delivery = '1800005005'.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900001'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 80.
ls_item_data-dlv_qty_imunit = 80.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900002'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 60.
ls_item_data-dlv_qty_imunit = 60.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900001'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900002'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
break cgavin.
CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
   EXPORTING
     header_data          = header_data
     header_control       = header_control
     delivery             = delivery
*   TECHN_CONTROL        = TECHN_CONTROL
   TABLES
*   HEADER_PARTNER       = HEADER_PARTNER
*   HEADER_PARTNER_ADDR = HEADER_PARTNER_ADDR
*   HEADER_DEADLINES     = HEADER_DEADLINES
     item_data            = item_data
     item_control         = item_control
*   ITEM_SERIAL_NO       = ITEM_SERIAL_NO
*   EXTENSION1           = EXTENSION1
*   EXTENSION2           = EXTENSION2
     return               = return
*   TOKENREFERENCE       = TOKENREFERENCE
*   HANDLING_UNIT_HEADER = HANDLING_UNIT_HEADER
*   HANDLING_UNIT_ITEM   = HANDLING_UNIT_ITEM
*   PARTIAL_GR_OBJECTS   =          PARTIAL_GR_OBJECTS
READ TABLE return
INTO ls_return
WITH TABLE KEY type = 'E'.
IF sy-subrc = 0.
   MESSAGE ID ls_return-id TYPE ls_return-type NUMBER ls_return-number WITH ls_return-message_v1 ls_return-message_v2
   ls_return-message_v3 ls_return-message_v4.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait          = 'X'.
break cgavin.
*&      Form CREATE_BATCH
*       text
*      <--P_LS_ITEM_DATA_BATCH text
FORM create_batch CHANGING p_ls_item_data_batch.
   DATA: ls_bncom TYPE bncom.
   ls_bncom-matnr = ls_item_data-material.
   ls_bncom-werks = 'C333'.
   ls_bncom-lgort = '3000'.
   SELECT SINGLE mtart
     FROM mara
     INTO ls_bncom-mtart
     WHERE matnr = ls_bncom-matnr.
   CALL FUNCTION 'VB_NEXT_BATCH_NUMBER'
     EXPORTING
       matnr                          = ls_bncom-matnr
       werks                          = ls_bncom-werks
       check_batch                    = 'X'
       check_material                 = ''
       message_when_auto              = ' '
       x_bncom                        = ls_bncom
       lock_batch                     = ' '
     IMPORTING
       new_charg                      = p_ls_item_data_batch
     EXCEPTIONS
       no_material                    = 1
       no_plant                       = 2
       material_not_found             = 3
       plant_not_found                = 4
       no_batch_handling              = 5
       batch_exist                    = 6
       no_number                      = 7
       illegal_batch_number           = 8
       interval_not_found             = 9
       object_not_found               = 10
       interval_overflow              = 11
       error_automatic_batch_number   = 12
       cancelled                      = 13
       automatic_batch_num_not_active = 14
       OTHERS                         = 15.
   IF sy-subrc = 0.
     CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         wait = 'X'.
   ENDIF.
ENDFORM.                    " CREATE_BATCH

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

The cheap & easy way is to just drag the app to the Trash.
If you want to get all of the associated files use an app deleting app like the free AppCleaner;
http://www.freemacsoft.net/appcleaner/
Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

How to use i for if condition in a for i in loop?

Hi friends,
I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
cursor is
select c1,c2,c3 from table1; -- 100 rows returned.
open cursor
loop
fetch c1,c2,c3 into v1,v2,v3;
for i in 1..3 loop
if 'v'||i between 90 and 100 then
v_grade := 'Excellent';
elsif 'v'||i between 80 and 89 then
elsif 'v'||i between 50 and 59 then
end if;
end loop;
close cursor;
This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
Thanks for any advice in advance!

user508774 wrote:
Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
So do not underestimate what can be done in SQL.
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
To create a SQL program with parameters is done by using bind variables. Instead of
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
The following SQL source code should be created:
v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
Where v1 and the others are PL/SQL variables.
That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28

I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

How to use parathesis for OR and AND OPERATOR...

oracle 10g
Hi
Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
select count(balance) from balanace_tb
where kk_code in(111,112,113)
or
kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
or
kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
or
kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
or
kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
and
open_date=20130331

I assume you're looking for something like this?
select count(balance) from balanace_tb
where (   kk_code in(111,112,113)
       or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
       or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
       or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
       or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
and open_date=20130331
If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
Re: 2. How do I ask a question on the forums?

Need documents for how to use OAM for APPS DBAs

Hi All,
Need documents/pdfs, how to use OAM for APPS DBAs.
Thanks a lot in advance

Hi,
For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
For 11i version pls chk :
Oracle Applications System Administrator's Guide - Configuration (zipped) B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
--Rk

How to use offset for select-option parameter ?

Hi experts
could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters.
following is my code
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
here "prctr" length is 10.
i'm using two tables 1. vbsegd-bupla
                                2. vbsegs-prctr
here prctr+6(4) = bupla.
"Bupla" length is 4
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                             WHERE belnr = it_vbkpf-belnr
                                                               AND gjahr = it_vbkpf-gjahr
                                                               AND bukrs = it_vbkpf-bukrs
                                                               AND bupla IN s_prctr.
the above statement is not working as prctr and bupla lenths are different. here i want to use offset.
SELECT belnr gjahr bukrs prctr sgtxt buzei FROM vbsegs INTO CORRESPONDING FIELDS OF TABLE it_vbsegs FOR ALL ENTRIES IN it_vbkpf
                                                            WHERE belnr = it_vbkpf-belnr
                                                              AND gjahr = it_vbkpf-gjahr
                                                              AND bukrs = it_vbkpf-bukrs
                                                              AND prctr IN s_prctr.
this is working as prctr and s_prctr lengths are equal.
could anybody please help me out in this.
Thanks in advance.
regards
satish

Below code will work for you.
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
RANGES: s_bupla FOR vbsegd-bupla.
s_bupla[] = s_prctr[].
DELETE ADJACENT DUPLICATES FROM s_bupla.
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                              WHERE belnr = it_vbkpf-belnr
                                                                AND gjahr = it_vbkpf-gjahr
                                                                AND bukrs = it_vbkpf-bukrs
                                                                AND bupla IN s_bupla.

How to use stysheet for Swing components?

Hi,
Give me a guidence abt how to use Stylesheet for Swing components to crate good looking GUI...........thnx

thank you for your reply,
I want to know how many times a component is refreshed. I'm asumming the RefreshCondition attribute gets called everytime a component gets refreshed, hence it could be counted.
I'm just not sure how to use it.

How to use multithreading for asynchronous operation

hi! i am really new to java, i want to improve the performance of my code, some suggested to implement asynchronous operation using multithreading. Please help me how to use multithreading for asynchronous operation. thanks in advance.

http://java.sun.com/docs/books/tutorial/essential/threads/
Note, however, that just making something multithreaded won't necessarily improve performance. You either need multiple CPUs or there needs to be some I/O going on that blocks while something else could be done--other I/O or computing.

HT1414 how to use itune for iphone activation

how to use itune for iphone activation

Get the latest version of iTunes, your Apple ID and just connect the iPhone to your computer and iTunes will guide you through activation.

How to use one report column into the another report in obiee

How to use one report column into the another report in obiee

i dont want to use column as a filter for another report it should be report column for another report
Thanks,
Vivek

Want to Use eHD for Primary Storage

Good day,
My question basically is: How do I change over to use my eHD as my primary storage instead of using it for back up through Time Machine? AND Can anyone explain how to do it as though I just plugged in a Mac for the first time yesterday?
Background: About 2 years ago with some great advice from people who answered a previous post I purchased a 1TM OWC external HD. I was down to 4GB left available on my internal and I find myself in a similar situation now with only 11.93GB left on my internal HD despite the 1TM eHD which is only a fraction full.
2 years ago when I originally connected my eHD I was given the option to store directly to eHD OR use it for back up through TM. Being a novice to it all and for whatever reason, not sure why exactly but at the time I chose to back up through TM. I was having issues with getting TimeVault turned off and was overwhelmed etc. etc.
Anyhow--flash forward 2 years later I am filling up my internal again with only the 11.93GB left that I mentioned. According to OmniDiskSweeper a good 142.9GB of it is coming from my movies---mostly the events vs. projects of course but 142.9GB none-the-less. I know when I import movies from my camera I can choose to direct them to the OWC but because the internal shows up first by default, sometimes I rush import without changing it to the OWC, hence filling up my internal.
Basically what I really want to do is store everything directly to the eHD and I am not sure how to do it. Is there anyone that can walk me through the process in simple, simple terms? Although I feel I've come a long way in 2 years I still consider myself a novice.
Yes, I have read many posts, threads, discussions but with different suggestions so not sure what is right. I am not familiar with this stuff such so I end up being afraid to "try" any of it for fear of losing my pics, movies forever. Or having to re-do them somehow. I read about just moving iMovie but too many options as to how and not sure which is right. Most forums are for people who know more than I about this already and suggest things like change events to view by volume (did it) but then I read stuff like open volume where events are stored and drag to volume you want to store it. Well for someone like me that raises more questions than answers. What volume? Do they mean in my case drag to the eHD? Will this keep everything the same as I had it? Will I still have my dates? Titles? Some discussions say copy. Do they mean move? Etc. Etc. Etc.
Really I want to just store directly to eHD for primary. I want to be able to open iMovie, iPhoto and have everything just like I do now but with all that glorius 1TB storage. I don't want to redo anything---just move and run off the eHD. Possible? If I simply unplug my eHD and reconnect---will I get the option I did 2 years ago to store directly to the eHD?
UGH!
Message was edited by: dgc0225 to re-arrange wording just after posting

Hi BDAqua,
If it's "easy" I would consider getting another 1 to 2 GB.
I read a post before I posted here that referred me to Ken Stone's site about formatting and partitioning but I couldn't change the "Volume Scheme" like in his examples. My real ones were greyed out so I didn't have the option to select. And honestly--reading on it's pretty complicated (based on my lack of knowledge with this) and I'm afraid I would screw it up anyhow. Anything else besides partitioning?
Anyone know what happens if I just turn-off Time Machine? What if I unplug the eHD and plug back in and start over? Like a re-boot of sorts? Too good to be true?

How to use upgrade for primary number on another number

Similar Messages

Maybe you are looking for