How to use Variable in SAP HANA Information Modeller?

Hello Folks,
I have created a variable in Information modeller of SAP HANA Studio on top of an Analytical view (Regional Sales). This variable is SingleValue (Multiple Value Selections). This variable should prompt me the name of Country/Regions but somehow this is not working when I am using data preview and Analysis tab of data preview.
Could you please enlight me where I am going wrong? or Let me know if is there any other forum for this.
P.S : I am using SAP HANA studio on Cloud.
Regards
Muffazzal Fani

Hi,
After you created that variable as mentioned above, did you apply this variable on your LAND1 attribute.
How: Open Analytic View --> on right-side you see the attributes,measures etc. >right click on 'LAND1' and select>
'Apply Filter'--> In the drop-down select your created variable and activate.
I assume the above should resolve your issue. Please let me know if it helps.
Revision: I mean the HANA version you are using.
Regards, Rahul

Similar Messages

Using Variable in SAP HANA

Hi experts,
in the past I´ve been using Input Parameters a lot and I was very satisfied with stuff like Mapping them for filter push down and so on. Due the fact, that I´m using Cognos BI as a frontend, I switched to Variables, because the SQL synthax is easier to handle.
If I´m using the Variable on several fields and checking the Mandatory box, all works fine in the Data Preview of HANA Studio. The Calc View won´t show any data, if I do not fill out the prompt of the Variable.
If I´m using a SQL statement (SELECT *) within the editor on the corresponding Column View in SYS_BIC, the query is still running, although the VARIABLE is mandatory.
Is there anything that needs to be considered? Data Source of the Calc View is an Analytic View.
Best regards, Christoph.

Hi,
After you created that variable as mentioned above, did you apply this variable on your LAND1 attribute.
How: Open Analytic View --> on right-side you see the attributes,measures etc. >right click on 'LAND1' and select>
'Apply Filter'--> In the drop-down select your created variable and activate.
I assume the above should resolve your issue. Please let me know if it helps.
Revision: I mean the HANA version you are using.
Regards, Rahul

How to use @variable(bouser) in Universe to get BOE userid in Xcelsius

Dear Expert,
I have request that need to display BOE userid to displayed in Dashboard using Xcelsius,
after searching in Internet, i found that it can be done by using @variable(bouser) in an object in the Universe, and use the object in Qaaws, but i don't how to use it.
already tried insert /* @variable('BOUSER') */ in END_SQL universe parameter, but still no luck.
my question is :
how to use @variable(bouser) in universe? and then my Xcelsius can display the BOE userid?
thanks in advance for any answer.
I Using SAP Integration KIT to create universe from Query BEX
Luqman
Edited by: luqman hakim on Jun 29, 2010 4:03 PM

>
Didier Mazoue wrote:
> Hi,
>
> You are mentioning that you are using SAP Integration Kit.
> Does it mean that the source you are targeting is SAP BW?
>
> If it is the case, this is unfortunately not supported.
> SAP BW MDX does not support calculated expressions that return string or date: this is a limitation of SAP BW engine.
> This is one of the reason why a lot of user exit are used to address these needs.
>
> Regards
> Didier
Didier Mazoue
yes, my Data source is SAP BW, and connected to BOE via SAP INT KIT.
It's too bad that SAP doesn't support so simple requirement.
you said : user exit
are used to address these needs.
so there are possibility to solve my problem.
would you give me the logic of user exit? which part I should create the user exit
I'm quiet familiar with user exit in BW
thanks

How to use variables with

I need to get the number of lines in internal table, which would
be easy, using DESCRIBE TABLE itab LINES lines. But the problem
is, that I get the name of this internal table in the field of
another internal table, so I have to use the name of internal
table as variable, but I don't know how to use variables with
DESCRIBE TABLE (or if this is possible).

Hi,
REPORT ZPRUEBA782 .
define two tables with diferent structures.
data: begin of table1 occurs 0,
registro type i,
end of table1.
data: begin of table2 occurs 0,
registro type i,
repid like sy-repid,
end of table2.
data: rows type i.
start-of-selection.
fill them with data
do 1000 times.
table1-registro = sy-tabix.
append table1.
enddo.
do 1757 times.
table2-registro = sy-tabix.
table2-repid = sy-repid.
append table2.
enddo.
call a form that receives as input the table and returns the number
of rows as output.
perform howmanyrows tables table2 changing rows.
break-point. "evaluate the number of rows
perform howmanyrows tables table1 changing rows.
break-point. "evaluate the number of rows
end-of-selection.
form howmanyrows tables itable changing rows.
rows = 0.
loop at itable.
add 1 to rows.
endloop.
endform.
You can try it if you don't find a better solution.
Cheers,
Chaitanya.

How to use variable in source path of an image in flex

hello
i just want to know that how to use variable in source path
of an image in flex

I am doing exactly that with data binding at the moment. This
is my Image element
<mx:Image width="50" minHeight="50" height="76"
source="{Application.application.parameters.api}/rest/entity/{data.Slug}/Image"
/>
Note the curly brackets
HTH
Pat

How to use variable in topology

Hi every one..
how to use variable in topology

The normal way you use in interface or procedure. But the package you are executing should have the variable in 1st step with set or refresh mode.

Re: [SunONE-JATO] Re: How to use a tiled view without a model

I'm not sure what is different for you now. You still parse the string
and put it into a data structure. Before the data structure was a
vector, in JATO its just a model with a "hidden" data structure (a hash
map).
MVC only really comes into play when you talk about where your write
this code, and where the data structure is being stored. So really, JATO
takes care of half of the MVC'ness of it all (where the data is store).
You just decide where to be the code to populate the model.
Make sense?
Is there something different required of you in JATO in this scenario
that I am not grasping?
c
Hoskins, John D. wrote:
Thanks for the feedback.
The problem I was solving involved a single string, which contained
delimited subsets of information.
The string looked like
this:"time|analyst|description|time|analyst|description|..."
In ND, I parsed it apart into it's components (time vector, analyst vector,
description vector), populated the repeated.
With JATO, how would I make a model for something that doesn't have a
database component like this?
I'm pretty new to this MVC thing, so bear with me.
John D. Hoskins
Telephone & Data Systems
Application Development & Support
Voice: 608.664.8263
Fax: 608.664.8288
Email: john.hoskins@t...
-----Original Message-----
From: Craig V. Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098031198039130252055210">craig.conover@s...</a>]
Sent: 6/26/2002 3.22 PM
Subject: Re: [SunONE-JATO] Re: How to use a tiled view without a model
I guess the only thing "weird" (for lack of a better term) about what
you are doing is that your are populating the model on the "display
cycle". Typically, the cycle goes like this:
Request -> populate model -> update data store -> retrieve data to
populate model -> display data
some of the above steps are optional but hopefully you get the point I
am making.
So what you are doing is:
Request -> populate model/display data
If it works for you, then it's not necessarilly wrong. But I would
probably have my model populated before I forwarded to the target
(displaying view bean) or at a minimum, in the begin display event of
the view bean or the tiled view, but not during the iteration of the
tiled view.
c
jhoskins wrote:
Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- Craig V. Conover wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- "Craig V. Conover" wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

How to use variables in logical file name definition FILE

Hi Friends,
How can I use variables in logical file name definition (tcode FILE). The requirement is to pass value in these variables (based on selection criteria), and use it as part of file name. You quick response will be highly appreciated.
Thanks,
Kuldeep Joshi

Hi,
Thanks for your reply.
In detail, the scenario is like I have created an Open Hub. Its working fine. Now I am planning to execute this open hub using process chain and for that I have to define the file output on application server along with logical file name (using tcode FILE). The logical file name contains two variables (defined in FILE) i.e. z_dept and z_fiscperiod.
Filter value in DTP ( I will read these values from Ztable using routine )
Dept = R&D
Fisc period = 004/2009
Variables defined in tcode FILE:
z_dept for Dept
z_fiscperiod for Fiscal Period
Logical file name : <z_dept>_<z_fiscperiod>.csv
Now the challenge is to populate filter values in these two variables so that the filter value can be used for naming the output file.
My last option is to read/update SAP standard table used for storing variable values (i.e. PARAMVALUE)
Please let me know if you can help me in this issue OR is there any standard method/FM to populate value in these variables
Thanks,
Kuldeep

How to use variables in data slices?

Hello,
in BI-IP I have tried to use variables in a data slice.
The user should fill these variables.
How can one use and fill these variables?
Thank you
Daniel

Hello Horst,
data slice is a very strong system lock. It is normally not a good decission to allow users to control this part becuse it sould be in administration of a responsible person.
If you allow users in the web to open or close data slices, this is like a "open period" funtion in financials: Think about what could happen, if anyone else than the responsible person could do that....
This is my point of view.
I would do it in anoter way: Create an User exit and fill a variable like desribed above. You read each line and make a decission whether the user might see this line or not (e. g. period open? yes or no?). The period and the status for the period could be maintained in a table or in a characteristic. table might be easier.
regards
Eckhard

How to use Webservices in SAP 7.0 SP 17

Hi,
I am having issues calling the webservices in SAP 7.0 SP 17.
I am following the below mentioned tutorial to call a webservice from a portal project (PAR).
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b449e790-0201-0010-1188-ff17840712d3
I have been successful to a point where my websevice needs authentication. I am not sure how to do this.
Here is the code of doContent()
public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
         try
              logger.infoT("Inside doConent()...");
               UserProfile up = pushUserProfileAttributes();
               logger.infoT("After pushUserProfileAttributes()...");
               ILDAPOperationsService port=(ILDAPOperationsService) PortalRuntime.getRuntimeResources ().getService (ILDAPOperationsService.KEY);
               logger.infoT("After port()...");
               RegisterUserResponse res = port.CreateExternalUserProfile(up);
               logger.infoT("After res ..user created." + res.getEmailAddress());
         } catch (UserRegistationFailed e){logger.errorT("Error in calling webservice...."+ e.getLocalizedMessage());}
              catch (Exception e1){logger.errorT("Error in calling webservice...."+ e1.getLocalizedMessage());
Its failing at RegisterUserResponse res = port.CreateExternalUserProfile(up);
and the error I am getting is
Error : Error in calling webservice....com.sap.engine.services.webservices.jaxm.soap.accessor.NestedSOAPException: Problem in server response: [Unauthorized].
Any help with this will be highly appreciated.
Also , if any documentation could be shared.
Looking forward to hear something soon on this.
Thanks,
Shiv

Hi Sumit,
you may move your question to the ABAP for SAP HANA community (http://scn.sap.com/community/abap/hana).
Are you asking about the SAP_BASIS version, or which version do you refer to?
Best,
Jasmin

How to use variable in automator?

So I am trying to create this dictation command in automator where i can go like this "Launch Safari" or "Launch iTunes" so how to use the variable for text in the command?

Hi,
This is possible without a variable.
Remove the "Ask for Text" and "Set value of Variable psize" actions.
In the "Scale Images" action:
-- Click on the "Options" button.
-- click on "Show this action when the workflow runs" checkbox.
This is almost similar to that "Ask for Text" action, since the "Scale Images" action will be displayed as a dialog, You can adjust the percentage in this dialog.

How to use variables in DVM

I have a string variable called codeValue and I want to use it in a dvm:lookupValue. Do you know how to use a variable in a dvm function? Below is my lookup function but I got an XPath error
dvm:lookupValue ('cityMap.dvm','Code',codeValue,'CityNames', 'CouldNotBeFound')
I also tried the below but it failed also
dvm:lookupValue ('cityMap.dvm','Code',bpws:getVariableData('codeValue'),'CityNames', 'CouldNotBeFound')
Thanks

Task Completed

How to use Variable in interface for Mapping in ODI 11g

Hi,
I want to use Variable 'Year' in interface mapping. how i can do that? I define a variable YEAR1 = '2001' and in interface i put #YEAR1 but it didn't work for me. is there any other way?
Example.
I m using 'Year' column in mapping and it is having different 3 constant values so i was think to define 3 variable Year1= '2001' & Year2= '2005' & Year3= '2010'.
In interface i just want to put variable name insted giving fix value.
regards
Sher

Thank u
I m trying with all the options & when i create Variable i and set Default value to ''2001'
'#YEAR'
#YEAR
'#PROJECT_NAME.YEAR'
#PROJECT_NAM.YEAR
#PROJECT_NAME.'YEAR'
and setting to Stagging Area
But still it is not working out.
I m suing ODI11.1.1.3
is it any issue?

How to use Variable in message mapping

Hi Experts,
I have some problem using variable in message mapping.
In one message mapping, since a block of logic is repeated for several fields, then i tried to use a variable instead.
the repeated logic is: first if condition, then use a udf to form a queue which will be suppressed by its father node.
i tried to assign the result queue to a variable after the UDF execution. (this variable is created after the father node)
I am wondering is there any restriction of using variable?
Can we assign the whole queue to a variable?
Can we use UDF during the process of assigning value to variable?
thanks in advance.

I dont think you can assign a queue to a variable,I am not 100% sure, . and there is no restriction to useing a Zvariable, only u can use it after you declare at some parent level.
Yes you can use a UDF in the process of assigning to a Zvariable.
Check out this link and read the comments of the blog.
SAP PI 7.1 Mapping Enhancements Series: Using Graphical Variable
/people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
Edited by: Saiyog Gonsalves on Nov 6, 2010 6:40 PM

How to use variable in rule script in HFM

I'm now writing VB script for HFM rule, and have something to ask about the use of variables in rule.
The script below generates the following error.
-Error description-
Line: 4, Error: Invalid Expression
HS.Exp "S#Actual.A#77300.I#[ICP None] = cur"
An error has occurred in Hyperion Financial Management.
-Rule script-
Sub Allocate()
Dim cur
cur = 500
HS.Exp "S#Actual.A#77300.I#[ICP None] = cur"
End Sub
On the other hand, the script below works properly.
-Rule script-
Sub Allocate()
HS.Exp "S#Actual.A#77300.I#[ICP None] = 500"
End Sub
Probably I'm not using variables in proper way, but have no idea how to correct it.
Does anyone have any idea?
Thanks in advance.

Hello,
try this in the sub calculate:
HS.Exp "S#Actual.A#77300.I#[ICP None]=" & cur
For the sub allocate, I suppose that you do not have the issue because the allocate is not launch during the consolidation process. Allocate is launched separatly by a right click, and can only be done when calculation status = "OK", which means that all calculation have been done (that could not be the case if you have an error like this in sub calculate).
Hope it helps

How to use Variable in SAP HANA Information Modeller?

Similar Messages

Maybe you are looking for