How to use WDR_OVS in HR Module

Hi all,
how can I use
/people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap
in Hr module?
and how can i bind the fiel (Name) to the ON_OVS methode?
any help please?

Hi ,
The implementation of OVS for HR module is no different from implementation for any other module just the difference in the fields used.
The ON_OVS is an event handler method for The event OVS so it does not require any other binding to field name.
The binding of field name to ON_OVS method is not required what binding is required is that when in the code of the method the values u assign to the fields are correct.
regards,
akshay

Similar Messages

I need this file "How to Use the Content Conversion Module in JMS Adapter"

Can someone send me this file:
"How to Use the Content Conversion Module in JMS Adapter"
I am not able to find it.
Thanks
Antonello

pls refer guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
Regards,
Swetha.

How to use Change doc Function Module?

Fn mod:ZSUBTESTCHG_WRITE_DOCUMENT
Import parameters               Value
OBJECTID                        ZSUBTESTCHG
TCODE                            SE37
UTIME                             00:00:00
UDATE                             09.03.2009
USERNAME                        'TESTUSER'
PLANNED_CHANGE_NUMBER
OBJECT_CHANGE_INDICATOR            I
PLANNED_OR_REAL_CHANGES         R
NO_CHANGE_POINTERS
UPD_ICDTXT_ZSUBTESTCHG               I
N_ZSUBTEST                         2         TEST
O_ZSUBTEST                         2         TEST
UPD_ZSUBTEST                    I
Tables                          Value
ICDTXT_ZSUBTESTCHG                 0 Entries
I have a ztable 'ZSUBTEST' with 2 fields DEPTID and DEPNAME and ticked "change document" for data element.
I have created the above change doc write fn module. I am trying to insert a new reocrd into table.
How to use ZSUBTESTCHG_WRITE_DOCUMENT so that even if i try to change an existing record in ztable the old and new values for a particulat ztable will be filled in CDPOS Table.
Would appreciate if you can suggest me how to use in1) Update and 2) Insert scenarios.
Thanks,
Subba

hi check this,
Types Declaration***
types: BEGIN OF X_audit,
Field of ZAUDIT TABLE OR a custom created table------
       END OF X_audit.
Data Declaration***
Data: w_newvalues type X_audit,
      w_oldvalues type X_audit.
DATA: BEGIN OF t_cdtxt OCCURS 0.
        INCLUDE STRUCTURE cdtxt.
DATA: END OF t_cdtxt.
DATA: l_tcode type cdhdr-tcode ,
       l_time type cdhdr-utime,
       l_usnam type cdhdr-username,
       l_date type cdhdr-udate.
**Constants****
CONSTANTS : l_objectid TYPE cdhdr-objectid VALUE 'ZAUDIT_CD'.
Initialization.
Clear: l_tcode,l_time, l_usnam, l_date.
Clear: w_newvalues, w_oldvalues.
**Start-Of-Selection**
Start-of-selection.
*Populating w_oldvalues workarea with old values from the table
Select single * from zaudit_t
                Into w_oldvalues
                Where belnr eq belnr_1
                And gjahr eq gjahr_1
                And bukrs eq bukrs_1. u201C where, belnr_1, gjahr_1, bukrs_1 are the fields on selection screen.
here we are populating w_newvalues workarea with new values
W_newvalues-f1 = w_oldvalues-f1
f2 = u2018XXXXXXXu2019     -
f3 = u2018YYYYYYYu2019
f4 = u2018ZZZZZZZu2019
l_tcode = sy-tcode.
l_time = sy-uzeit.
l_usnam = sy-uname.
l_date = sy-datum.
modify the table with new values***
MODIFY zaudit_t FROM w_submit.
IF sy-subrc EQ 0.
    MESSAGE 'Document Updated' TYPE 'S'.
call function 'ZAUDIT_CD1_WRITE_DOCUMENT'
    exporting
      objectid                   = l_objectid
      tcode                      = l_tcode
      utime                      = l_time
      udate                      = l_date
      username                   = l_usnam
    PLANNED_CHANGE_NUMBER      = ' '
      object_change_indicator    = 'U'           u201CU-update, I-insert, D-delete
    PLANNED_OR_REAL_CHANGES    = ' '
    NO_CHANGE_POINTERS         = ' '
      upd_icdtxt_zaudit_cd       = 'U'
      n_zaudit_t                 = w_newvalues u201Cpass the work area containing new values
      o_zaudit_t                 = w_oldvalues u201Cpass the work area containing old values
      upd_zaudit_t               = 'U'         u201C this parameter gives the values in the columns(new value, old value and changed field name) of table CDPOS.
    tables
      icdtxt_zaudit_cd           = t_cdtxt
ELSE.
   MESSAGE 'Document Not Updated' TYPE 'S'.
ENDIF. u201CIF sy-subrc EQ 0.

How to use the alv function module

hi all,
        can any one help me out how to use reuse_alv_block_list_append function module, what parameters shall i pass to it, so that i get top of page and end of page events and report data in two blocks, can any one tell how can i didvide the data into block, at a particular line

hi,
this is my simple alv blockedlist programme.go through it.it will definrtley help u.
REPORT z50870alv_blocked.
TYPE-POOLS : slis.
*&      structure declaration
TYPES : BEGIN OF st_ekko,
          ebeln TYPE ekko-ebeln,    "Purchasing Document Number
          bstyp TYPE ekko-bstyp,    "Purchasing Document Category
          bsart TYPE ekko-bsart,    "Purchasing Document Type
          aedat TYPE ekko-aedat,    "record created on
          ernam TYPE ekko-ernam,    "Person who Created the Object
        END OF st_ekko.
TYPES : BEGIN OF st_ekpo,
          ebeln TYPE ekko-ebeln,
          ebelp TYPE ekpo-ebelp,    "Item Number of Purchasing Document
          ematn TYPE ekpo-ematn,    "Material number
          matkl TYPE ekpo-matkl,    "Material group
          netpr TYPE ekpo-netpr,    "Net price in purchasing document
        END OF st_ekpo.
*&      internal table and work area declaration
DATA : it_ekpo       TYPE STANDARD TABLE OF st_ekpo,
       it_ekko       TYPE STANDARD TABLE OF st_ekko,
       it_fieldcat1 TYPE slis_t_fieldcat_alv,
       wa_fieldcat1 TYPE slis_fieldcat_alv,
       it_fieldcat2 TYPE slis_t_fieldcat_alv,
       wa_fieldcat2 TYPE slis_fieldcat_alv,
       it_events     Type slis_t_event,
       wa_layout     TYPE slis_layout_alv.
*&      data declaration
DATA : v_ebeln TYPE ekko-ebeln.
*&      selection-screen
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-000.
SELECT-OPTIONS : so_ebeln FOR v_ebeln.
SELECTION-SCREEN END OF BLOCK a.
*&      At-selection-screen
at selection-screen on so_ebeln.
perform validate_ebeln.
*&      start-of-selection
START-OF-SELECTION.
PERFORM data_retrieval.
*&      end-of-selection
END-OF-SELECTION.
PERFORM initialize_alv_block.
PERFORM build_fieldcatalog1.
PERFORM build_fieldcatalog2.
PERFORM build_layout.
PERFORM get_events .
PERFORM append_ekkodata_to_alv_block.
PERFORM append_ekpodata_to_alv_block.
PERFORM display_blocked_alv.
*&     FORM initialize_alv_block
FORM initialize_alv_block.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = sy-repid.
endform.
*&     FORM validate_ebeln
form validate_ebeln.
select ebeln
   from ekko
   into table it_ekko
   where ebeln in so_ebeln.
if sy-subrc ne 0.
    message text-003 type 'W'.
endif.
endform.
*&     FORM data_retrieval
FORM data_retrieval.
SELECT ebeln bstyp bsart aedat ernam
    FROM ekko
    INTO TABLE it_ekko
    WHERE ebeln IN so_ebeln.
if sy-subrc ne 0.
   message text-001 type 'I'.
endif.
SELECT ebeln ebelp ematn matkl netpr
    FROM ekpo
    INTO TABLE it_ekpo
    WHERE ebeln IN so_ebeln.
if sy-subrc ne 0.
   message text-002 type 'I'.
endif.
endform.
*&      Form build_fieldcatalog1
FORM build_fieldcatalog1.
wa_fieldcat1-fieldname   = 'EBELN'.
wa_fieldcat1-seltext_l   = 'PURCHASE ORDER'.
wa_fieldcat1-col_pos     = 0.
APPEND wa_fieldcat1 TO it_fieldcat1.
wa_fieldcat1-fieldname   = 'BSTYP'.
wa_fieldcat1-seltext_l   = 'DOCUMENT CATEGORY'.
wa_fieldcat1-col_pos     = 1.
APPEND wa_fieldcat1 TO it_fieldcat1.
wa_fieldcat1-fieldname   = 'BSART'.
wa_fieldcat1-seltext_l   = 'DOCUMENT TYPE'.
wa_fieldcat1-col_pos     = 2.
APPEND wa_fieldcat1 TO it_fieldcat1.
wa_fieldcat1-fieldname   = 'AEDAT'.
wa_fieldcat1-seltext_l   = 'DATE'.
wa_fieldcat1-col_pos     = 3.
APPEND wa_fieldcat1 TO it_fieldcat1.
wa_fieldcat1-fieldname   = 'ERNAM'.
wa_fieldcat1-seltext_l   = 'NAME'.
wa_fieldcat1-col_pos     = 4.
APPEND wa_fieldcat1 TO it_fieldcat1.
ENDFORM.                    "build_fieldcatalog
*&      Form build_fieldcatalog2
FORM build_fieldcatalog2.
wa_fieldcat2-fieldname   = 'EBELN'.
wa_fieldcat2-seltext_l   = 'PURCHASE ORDER'.
wa_fieldcat2-col_pos     = 0.
APPEND wa_fieldcat2 TO it_fieldcat2.
wa_fieldcat2-fieldname   = 'EBELP'.
wa_fieldcat2-seltext_l   = 'ITEM NUMBER'.
wa_fieldcat2-col_pos     = 1.
APPEND wa_fieldcat2 TO it_fieldcat2.
wa_fieldcat2-fieldname   = 'EMATN'.
wa_fieldcat2-seltext_l   = 'MATERIAL TYPE'.
wa_fieldcat2-col_pos     = 2.
APPEND wa_fieldcat2 TO it_fieldcat2.
wa_fieldcat2-fieldname   = 'MATKL'.
wa_fieldcat2-seltext_l   = 'MATERIAL GROUP'.
wa_fieldcat2-col_pos     = 3.
APPEND wa_fieldcat2 TO it_fieldcat2.
wa_fieldcat2-fieldname   = 'NETPR'.
wa_fieldcat2-seltext_l   = 'NET PRICE'.
wa_fieldcat2-col_pos     = 4.
wa_fieldcat2-do_sum      = 'X'.
APPEND wa_fieldcat2 TO it_fieldcat2.
ENDFORM.                    "build_fieldcatalog
*&      form build_layout.
FORM build_layout.
wa_layout-zebra ='X'.
wa_layout-no_vline = 'X'.
wa_layout-no_hline = 'X'.
wa_layout-colwidth_optimize = 'X'.
wa_layout-window_titlebar = 'PURCHASE ORDER HEADER AND ITEM DETAILS'.
ENDFORM.                    "build_layout
*&      form append_ekkodata_to_alv_block
FORM append_ekkodata_to_alv_block.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = wa_layout
    it_fieldcat                      = it_fieldcat1
    i_tabname                        ='it_ekko'
    it_events                        = it_events[]
IT_SORT                          = IT_SORT
I_TEXT                           = ' '
TABLES
    t_outtab                         = it_ekko
EXCEPTIONS
   PROGRAM_ERROR                    = 1
   MAXIMUM_OF_APPENDS_REACHED       = 2
   OTHERS                           = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
*&      form append_ekpodata_to_alv_block
FORM append_ekpodata_to_alv_block.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = wa_layout
    it_fieldcat                      = it_fieldcat2
    i_tabname                        ='it_ekpo'
    it_events                        = it_events[]
IT_SORT                          = IT_SORT
I_TEXT                           = ' '
TABLES
    t_outtab                         = it_ekpo
EXCEPTIONS
   PROGRAM_ERROR                    = 1
   MAXIMUM_OF_APPENDS_REACHED       = 2
   OTHERS                           = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
*&      FORM display_blocked_alv.
FORM display_blocked_alv.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
endform.
*&      Form GET_EVENTS
FORM get_events .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 2
    IMPORTING
      et_events       = it_events[]
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " GET_EVENTS\
regards,
pavan t.

How to use SWC_CREATE_OBJECT in Function Module

Hi All,
I need to create a one function module to fill the work flow container field. this work flow builder had only one task, that task is triggering through QM Action box. I need to maintain this function module in AM Action box, FM when saving field.
Please help me how to create a new function module in QM Acion box. When run the QM02 with usage decesion option is triggered Associated task is triggering, now how i will pass the notification number to work flow container.
Please help me

I think you can
SWC_CREATE_OBJECT 'QMObject' Object Key
Or you can pass the QM number to the Workflow and use GENERICINSTANTIATE Method of Business Object SYSTEM to instantiate the QM Business Object.
Thanks
Arghadip

How to use a BAPI function module in programs?

Hi,
I have developed a BAPI enabled Function module & object type in 4.7. I want to use it to retrieve data from table T001 in 4.7 and display the output in 5.0. I am not able to get the data into 5.0. Please suggest me how to do this.
A program example would be appreciated.

Hi Prabhu,
Firstly to say Bapis are version independent though the version is changed it does nt effect .. But as u said u want to fetch the data frm 4.7 tht too from table t005 observe tht the table data is not independent it is dependent tht is the reason why u r able to call the bapi but not able to display the data here . hope u know the procedue to call it in editor ...So now try it and check tht wether data is present in tht 5.0 version table ...t005 . thn it will be solved..if at all it is not working thn it might be problem with the bapi business object u created might be wrong check...
Regards,
Sana.
reward if useful ...

How to Use F4 help in Module Pool Programming??????

Hi Friends,
This is Jagadeesh, I have an issue Module Pool Programming. Any of you can go through on this and can give an required answer.
Issue is as follows,
I have an Input/Output field for that i need to give f4 help, based on that field the related data should sit in to my table control. The thing is there is no relation between the input/output field and the table control fields.
Is this possible? If so how can i do this.

Hi Jagadeesh,
For F4 Values on Screen:
PROCESS ON VALUE_REQUEST
using module call starting with FIELD i.e FIELD field MODULE module
There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
DYNP_VALUE_READ
F4IF_FIELD_VALUE_REQUEST
F4IF_INT_TABLE_VALUE_REQUEST
POPUP_WITH_TABLE_DISPLAY
DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
e.g.
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
F4IF_FIELD_VALUE_REQUEST
This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
POPUP_WITH_TABLE_DISPLAY
This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
parameter.The VALUETAB is used to pass the internal table.
A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL =
ENDPOS_ROW =
STARTPOS_COL =
STARTPOS_ROW =
TITLETEXT = 'title text'
IMPORTING
CHOISE =
TABLES
VALUETAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
e.g.
DATA: w_choice TYPE SY-TABIX.
DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
values TYPE I,
END OF i_values.
PARAMETRS : id TYPE I.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
i_values-values = '0001'.
APPEND i_values.
i_values-values = '0002'.
APPEND i_values.
i_values-values = '0003'.
APPEND i_values.
i_values-values = '0004'.
APPEND i_values.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL = 40
ENDPOS_ROW = 12
STARTPOS_COL = 20
STARTPOS_ROW = 5
TITLETEXT = 'Select an ID'
IMPORTING
CHOISE = w_choice
TABLES
VALUETAB = i_values
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
CHECK w_choice > 0.
READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
...in the structure i_values.
Other FM that may be used to provide input help is HELP_START .
regards,
Dj
reward for all useful answers.

How to use fieldtab with Function Module F4IF_INT_TABLE_VALUE_REQUEST

Hi,
I'm using the function module F4IF_INT_TABLE_VALUE_REQUEST to build a matchcode in a selection screen parameter.
The internal table that I use have 3 fields:
        GROUPID like APQI-GROUPID,
        CREDATE like APQI-CREDATE,
        STATE type string.
STATE is not in ABAP dictionary, so the function doesn't show this field. I need this field having field label 'STATUS'
I have tried to use table FIELDTAB, but I cannot resolv the problem.
Can anyone help me?
Kind Regards

Hi
See the following ex:
TYPES: BEGIN OF TY_MBLNR,
MBLNR LIKE MKPF-MBLNR,
END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_MBLNR
FIELD_TAB =
RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
read table it_ret index 1.
move it_ret-fieldval to S_mat-low.
ENDIF.
Go through the test program.
REPORT Ztest_HELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Regards
Anji

How to use table control in module pool programming

Hi
I want to use a table control to fetch some data from mara table.
Please guide me with the procedure and the steps which I can follow to complete my program correctly.
thanks
Lalit Gupta

As [vinraaj|http://forums.sdn.sap.com/profile.jspa?userID=3968041] wrote, call transaction SE51, there is a Wizard to help you generate the table control, it will create the table control and some includes with PBO/PAI modules > Read [Using the Table Control Wizard|http://help.sap.com/saphelp_bw/helpdata/en/6d/150d67da1011d3963800a0c94260a5/frameset.htm]
Also there is a tutorial in the wiki, read [Learn Making First Table Control |http://wiki.sdn.sap.com/wiki/display/ABAP/LearnMakingFirstTableControl] by [Krishna Chauhan|http://wiki.sdn.sap.com/wiki/display/~nc0euof]
Regards,
Raymond

How to use the J_1B_NF_VALUE_DETERMINATION fn.module

dear all,
can anybody help me out in using the function module.
J_1B_NF_VALUE_DETERMINATION : Read values from NF returned combined with J_1B_NF_DOCUMENT_READ using.
to determine the NFTOT value.
regs,
Raja

Refer this report - J_1BLB03
Regards,
Amit
Reward all helpful replies.

How to use dropdown list in module pool

Hi guys,
I have provided a dropdown list in my screen in my module pool program.
How should I insert values in the dropdown list.
Regards
Mac

HI,
Check this code.
PROCESS AFTER INPUT
PROCESS ON VALUE-REQUEST.
FIELD ZDEPT-DEPTNO MODULE create_dropdown.
*** DOUBLE CLICK ON CREATE_DROPDOWN
MODULE create_dropdown INPUT.
SELECT EMPNAME
                DEPTNAME
                FROM YDEPT
                INTO CORRESPONDING FIELDS OF TABLE itab_details.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'DEPTNO'
            value_org       = 'S'
       TABLES
            value_tab       = itab_details
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc 0.
ENDIF.
ENDMODULE.
HERE IN PAI DOUBLE CLICK THE MODULE THEN WRITE THE ABOVE CODE IT SHOULD WORK.
YDEPT IS THE TABLE I CREATED TO STORE DEPARTMENT NUMBERS.
ZDEPT IS THE STRUCTURE OF THE TABLE.
IF YOU ARE STILL UNCLEAR
PLEASE CHECK
'DEMO_DROPDOWN_LIST_BOX' PROGRAM IN SE51 AND SCREEN NUMBER IS 100
Regards and Best wishes.

How to use LR 1.3 modules with LR 1.4

Hello:
This worked for me. I edit all the Info.lua files of my modules:
LR/Mogrify
LR/enfuse
zenfolio export
flick export
Locate the line
LrSdkVersion = 1.3,
and change this line with this
LrSdkVersion = 1.4,
Save the Info.lua file and restart LR 1.4. You will see the modules again.
I have only tested the LR/Mogrify. It seems to work.
Regards,
Javier.

This trick will allow 1.4 to sow the plugin and you may get to use it. But does not mean you will necessarily have no problems with the plugin if it is not the latest version meant for 1.4.
Best to upgrade the Plugins to what is available from the third party source of them.
Don
Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D
See LR Links list at my http://donricklin.blogspot.for related sites.

HOW TO USE BAPI IN FUNCTION MODULE

Hi All,
I am writing BDC for f-28 in that inbetween bdc i wanted to call a bapi and wated to display that to the endusr and ask user to select line iems from that and then proced the bdc further bsed on that selection
PL Sugeest me Somthing
Pts assured
Regards
Shashikant

So you are going to do BDC in foreground?
If so, which sounds a bit strange to me, but if that's the requirement, it be so. But when you are doing this in foreground anyway, then you can call the BAPI / And pop-up at 'any' point in time.
I really don't see any problem.

How to use the Function module 'BAPI_APPRAISAL_GETDETAIL'

hello friends,
I have to create the report which displays appraisee name, appraiser name,reviewer name and result.Using BAPI_APPRAISAL_GETDETAIL we can get the above all.But i don't know how to use the above function module.If anyone have used in their program could you please send me or anyone have idea how to do that Please help.It is very Urgent Help me.
Thanks in advance,
Regards,
Ashok.

Hi,
I do not hae the code but i can tell you how you use the FM and get the required data, please follow the below mentioned steps:
1) In this Bapi you need to pass the Plan verison and Object Id data in the BAPI Import parameters and while passing the these values need to decalra the data variables same (of use the same reference fields as they are in Bapi import fields)as they are Bapi importing data fields.
2) decalre the Internal Table structure as they are in the Export and Table parameters.
3) Assign the decalred Import and Tables structures to the BAPI FM.
4) once the Bapi is run with the Import parameters data the Apprisal data and Apprisee data will returened in the import and table structures and also return value wll be imported.
5) now using the Structures which are in Import and Table decalrations in the FM you can retrieve the data by reading them.
Do let me know if you need any more details in this regard.
Raghotham Reddy.
If you find this is the right solution then allocate reward point.

Explanation how to use rainflow module with rainflow counting method

Hello, I want to know how to use the Rainflow Classification Module in dasylab 13.0, in particular with the rainflow counting method. I save the result matrix, but I don't understand how to read it. The help is quite useless, because it doesn't explain what there is in the matrix for this method. My target is to obtain a matrix with number of cycles catalogued by mean value and alternative value.
Someone can help me?
thanks

Hi Davide,
I'm not familiar with DasyLab software, but I found some helpful documentation on NI website.
Try to look @ these KBs:
How to Display a Rainflow Matrix in DASYLab
Additional Information about the Rainflow Algorithms in DASYLab
DASYLab Rainflow Module and Counting Methods
DASYLab Support
Best Regards.
CLA_Cup

How to use WDR_OVS in HR Module

Similar Messages

Maybe you are looking for