How to use wsdp in an existing war?

i have a war previously established,any one knows if i can use wsdp with that web application,that means i can write webservice inside the previous war,and i can get the advantages of using all existing classes in that war....that's a big problem ,i think,it 's a problem of DEPLOYMENT of wsdp,i think ,of course,wsdp will not only be used on independent war and only on tomcat,but cannot find any document on this topic on sun's site,that surprised me..

To redistribute your jwsdp code, you need to include some jars from the jwsdp. Here is a link to the doc that tells you what you need for what types of services:
http://java.sun.com/webservices/docs/1.3/ReleaseNotes.html#RedistributableComponents

Similar Messages

How i use nwdi to modify existing standard web dynpro application

Hi,
I need to change some existing application of web dynpro Java. I found solution nwdi would help in that. But how i use it can any one explain me in detail. Nwdi has already installed over here. So can i use it can explain me step by step.
Regards,
Gurprit Bhatia

Hi,
First you need to import the WD application to your NWDS and then you need to checkout the code for making any changes after making the chanhes you have to checkin the code.
First you need to setup the portal path in
1. WIndow->Preferences->Java Development Infrastructure->development Configurations.
2. You have to create a client in DTR by going into DTR Perspective.
3. Import the configuration from the track (this is your standard WD application) in Development Configurations Perspective.
4. Create the project from Inactive DCs tab.
5. Navigate to WD Perspective and build the project.
6. Check out the code to make chnages
7. Checkin the code after making the changes
8. Test the application in Portal
Regards,
Lakshmi.

How to use Portal SSO with existing BSP application

Hi all,
we run SAP EP 6.0 here and have a single start BSP page of
an application integrated with the SAP appintegrator for BSP. The rest of the existing BSP application still uses
the login functionality based on CL_BSP_LOGIN_APPLICATION
and is not integrated in the portal.
Problem: If a user directly accesses one of the "old" BSP pages, he should be redirected to the portal to auth. him via SSO and afterwards the original BSP page with all its parameters should be processed.
How to deal with that? Is there a similar mechanism like with the BSP_LOGIN_APP in between for the SAP EP?
Thanks for your help!
-RAINER-

I think that doesnt solve the problem.
I have 2 systems: SAP ECC with all BSPs and the portal on another system. So I have to entry points: Via portal using the appIntegrator BSP or directly to the ECC.
As-is: If the auth. for the BSP appl. fails, the user is re-directed via the error page given in the service (SICF)
to a BSP login app. and from there to the requested page.
No portal in this concept.
Must-be: A user is still able to directly access a BSP on the SAP ECC by entering the URL in the browser. It's not a must entering via the portal first.
So when the login failed on the ECC (no SSO ticket), he should be redirected to the portal for getting his SSO.
After he signed in successfully the user will be forwarded to the BSP page he entered in the browser the first place.
I can't see a way to use the URL iView. I am thinking of simply changing the login mechanism of the BSP using the portal login functionality.
The link you gave me offers an implementation of CL_ICF_SYSTEM_LOGIN. Any ideas?
Regards,
-RAINER-

How to use company users on existing ldap server as EP6.0 sp2 Users?

Hi everybody
Our company user data is on a LDAP server we want to connect our EP6 UME to this existing LDAP server so that existing company users can access the Portal with their company id and password. What configuration we should do on the portal ?
thanks and regards
Rajendra

Hi!
Look at Admin Guide:
Administration Guide->Portal Platform->System Administration->User Management Configuration->Configuration of Data Sources Used for User Management->Defining an LDAP Directory as a Data Source
WBR, Lnk

How to use own J2EE library withon WAR/EAR?

Hi,
I've written a servlet within a WAR that uses for example JCo-Conenction. For that. I've added com.sap.mw.jco as "Used DC" in the WAR-Metadata. Additionally, I've added the DC in the EARs application-j2ee-engine.xml
<reference reference-type="hard">
<reference-target provider-name="sap.com"
target-type="library">com.sap.mw.jco</reference-target>
</reference>
Everything is fine so far. But now, I want to use a self-created J2EE-Library DC that is deployed on the server.
I've added it to the WARs "Used DC"s as well and added it to the EARs application-j2ee-engine.xml. But the servlet is not loaded during deploy. It fails with the error "NoClassDefFound: <class i have in my J2EE-Library project>"
is there anything more to do for self-created J2EE-Libs?
kr, achim

Marc,
I've solved it already. I've added indeed the wrong DC ("libs/servicelibs" instead of "libs/servicelibs_j2ee"). Well, bad naming conventions, it was late and I have the flu...
Anyway, thanks for supporting me, that all what I did was correct
kr, achim

How to use rapidweaver on an existing website?

Hello - I realize that this isn't iweb, but close enough. I have an existing website created by a friend(dreamweaver). All of the pages are embedded jpgs with links/anchors to the other pages or files. Is there a way in rapidweaver to update those pages. I have the original files created in photoshop so I can edit them there. I just need a way to take away the old page and replace it with the new.
I have access to my host and such. Many Thanks!!

It's not that you cannot post your question here, it's that we don't really have the answers.
In the other forum they will know what they are doing.
Good luck
Mireille

How to use classes from an existing outside library ?

Dear People,
I added a library to use classes already built.
In JBuilder7 I went to Tools | ConfigureLibraries
and added the objectdraw library. At the left when I look in the
directory structure under User Home is "objectdraw" so I did
add the library correctly but when I put in the coding a try
to run it, the error messages say:
"MakeBox.java": Error #: 200 : <identifier> expected at line 8,
which is the line : public void MakeBox()
The entire code is :
package stan_e_makebox;
import objectdraw.*;
import java.awt.*;
public class MakeBox extends WindowController
void public MakeBox()
public void onMousePress(Location point)
new FilledRect(40,80,30,20,canvas);
public static void main(String[] args)
new MakeBox();
Thank you in advance
Stan

oo sorry,
this is the constructor i assume, so should be
public MakeBox()

How can I add to an existing path using the pencil tool?

This probably seems like a rather elementary question, but
whenever I draw a path using the pencil tool, reselect it,
hover over the endpoint, and the click and drag to extend
the line off into a different direction, Illustrator will often
(but not always) erase the existing path and leave only the
new one that I drew.
To wit:
In step 1 above, I draw a line with the Pencil tool.
In step 2 above, I reselect the line from step 1, hover over the endpoint, and then continue to draw further.
However, as can be seen in step 3, the line from step 1 disappears after I draw the new path.
I am aware of the pencil setting, "Edit selected paths", and I have checked it to edit selected paths
within 12 pixels for the above example. What I am doing in the above example, and what I
want to do, is to be able to add more paths onto an existing one using the pencil tool,
rather than have a completely new path being drawn every time I lift up my pen to finish
drawing the previous path.
I also realize that I can do this with the pen tool; but the pen tool is a more
precise tool (and somewhat more cumbersome), and I prefer to have more
of the rough-handed look from time to time.
Finally, I also know that I can use the direct selection tool to select endpoints
from two different paths and then join them using the join command;
but this seems to be more trouble than it's worth in many cases, especially
if I want to do it frequently for a more long and complicated line.
Am I expecting too much out of Illustrator?
Is my idea of how to use the existing tools wrong in this case?
Is there some piece of knowledge I'm missing?
I'm on Illustrator CS5, Mac OS X 10.6.8, using a Wacom Intuos4 tablet.
However, I have confirmed the above on Illustrator CS4 for Mac as well.
Any help or comments would be much appreciated.
Jeff

Thanks @rcraighead - the Live Paint process seems a bit overkill for simply adding
a new path onto an existing pencil path, but I did try the first idea you suggested,
which was tracing a bit over the last part of the existing path and then continuing
on to extend the path. It's a bit imprecise because the existing path gets slightly
modified, but it seems to work pretty well all in all. Nice idea indeed - thanks a million.
I also found that in AI CS5, I can use the selection tool to select all of the paths
in this case and then join them using the join command. I thought I needed to
select individual anchor points for this to work, but it actually works really
well, better than I thought. I seem to recall that previous versions of Illustrator
were a lot more picky with the Join command, but then again this might just
have been my lack of understanding.
I'm curious to know what other solutions to the above problem that other users
might have, so I will leave this question unanswered for a bit...
but I will use your initial technique described - it seems to work
pretty well, in absence of other options Many thanks again for your timely help.
Jeff

How to use "Notes" on my iPad with my existing iCloud address?

How to use "Notes" on my iPad with my existing iCloud address? It asks me to create a new one...

Did I overlook some critical info here? I'm having the same problem described by Henry5, but I'm signed in to iCloud with my AppleID which is not the same as my Mobile Me/iCloud email. I keep being asked to create an account (which it won't allow me to do since the account already exists) but no where do I see an option to use the existing account. I also tried logging out with my AppleID account, and using the iCloud email, but that doesn't work.
I just want to sync my notes and mail... this is really irritating!

I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am warned that I will not be able to use this video in existing projects How do I point iMovie to events in my external hard drive so I can pl

I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am woarned that I will not be able to use this video in existing projects
How do I point iMovie to events in my external hard drive so I can play projects which use them?
MacBook, iMovie 9.0.4

Hi
You can do this - by not doing it the way You describe as it will not work.
a. the external hard disk - MUST BE - Mac OS extended (hfs) formatted -
UNIX/DOS/FAT32/Mac OS Exchange - will work for most things - BUT NOT FOR VIDEO (iMovie, iDVD or FinalCut doesn't matter)
b. Do not alter or move any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - at all
All moving's of Events and Projects must be done within the iMovie Application - then connections will not break.
(move them back and see if iMovie remembers them - then do move as described above)
Yours Bengt W

How to find the list of existing tables in a schema using DB link?

Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

Can any one tell me how to use EXISTS clause inplace of IN operator.

Hi All,
Can any one tell me how to use EXISTS clause AND (JC.EMPL_ID, JC.EMPL_RCD) inplace of IN operator.
SELECT COUNT (1)
FROM SYSADM.OHR_PERS_CURR PC
, SYSADM.OHR_JOB_CURR JC
WHERE PC.EMPL_ID = JC.EMPL_ID
AND (JC.EMPL_ID, JC.EMPL_RCD) in (
SELECT HS.EMPL_ID, HS.EMPL_RCD
FROM SYSADM.HU_SCRTY_JOB HS, ODSHR.OHR_SCRTY_USER_CFG OS
WHERE HS.HU_SCRTY_CFG_ID = OS.HU_SCRTY_CFG_ID
AND OS.DB_LOGIN = USER)
Thank you.

SELECT COUNT (1)
FROM SYSADM.OHR_PERS_CURR PC
, SYSADM.OHR_JOB_CURR JC
WHERE PC.EMPL_ID = JC.EMPL_ID
AND EXISTS (
SELECT null
FROM SYSADM.HU_SCRTY_JOB HS, ODSHR.OHR_SCRTY_USER_CFG OS
WHERE HS.HU_SCRTY_CFG_ID = OS.HU_SCRTY_CFG_ID
AND OS.DB_LOGIN = USER
AND HS.EMPL_ID = JS.EMPL_ID AND HS.EMPL_RCD = JC.EMPL_RCD)
But why ?
Rgds.

Can anyone tell me how to use Tiles framework in an existing JSP page

I want to seperate my portal area using tiles. I'm looking for example on how I go about that.

This book doesn't have information on how to use tiles in legacy JSP page. Let me rephase the question again:
How do I place Tiles tags to an existing JSP page to seperate the areas in a page?

How to use EXISTS or NOT EXISTS in analysis

Hi all,
I'm using OBIEE 11g. My question is how to use the functionality of SQL - EXISTS/ NOT EXISTS? I have a model where i have 2 fact tables . When i select from the first fact in some circumstances i want to anti-join the other fact table. Let us consider that the two fact tables are big enough /around 300mln of records/. Any ideas?
Thanks in advance,
Alexander.

Stop asking these stupid vague questions and do some of your own research.
Start here:
http://www.regular-expressions.info/
http://java.sun.com/j2se/1.5.0/docs/api/java/util/regex/Pattern.html

[HTML DB] How to use the existing database table?

[HTML DB] How to use the existing database table?
I installed Oracle 10g database in Computer A(Windows 2000), and I already create all the tables with data and the data size is about 300MB.
In Computer B(Windows 2000), I installed HTML DB 1.6.
How can I use /get the existing database table (in computer A) for HTML DB?
Could anyone help me on this? I am newbie and I need some detail instructions. or Where can I find the examples.....
Thanks

Well I guess if you wish to retain that architecture, i.e. HTMLDB on one machine and your data on another, you will have to establish database links to access the data. Oracle documentation will describe how to achieve that.

How to use wsdp in an existing war?

Similar Messages

Maybe you are looking for