How to validate an attribute in an entry from another data source

Hi,
i have a problem..
the users in our system have an address field...now this address field has to be verified against the values of addresses stored in another database,lets call it AddDB...
if the address entered in the entry does not match against the addresses in AddDB, the user entry should not be confirmed.
Please help
PuneetG

Ideally these kind of checks should be done by the application (ldap client). Alternativerly this can be achived via a custom plugin. Most likely you'll have to write a pre-op mod/add plugin. Details about plugin programming etc are here
http://docs.sun.com/app/docs/doc/817-7617
Regards,
-Wajih

Similar Messages

  • Validate list column based on entry from another column

    Hi there
    I would like to ensure that a value is entered in list column B, if there is a value of 'Yes' in list column A.
    I assume this formula is entered in the Validation settings of the list, but cannot work out what is required.
    Is it something like?     =IF([Col-A]="Yes",IF(LEN([Col-B]<1,TRUE,FALSE),TRUE)
    Thanks
    Asher
    Fast, Cheap, Good. Choose any Two!

    Ahh, found a solution:
    =IF([Col-A]="Yes",IF([Col-B]<>"",TRUE,FALSE),TRUE)
    Now i need to do the same for other fields in the list, and these formulas must go together in the validation settings of the list, which is going to look messy.
    If i want to do the same with columns C and D, how would i append this to the formula?
    =IF([Col-C]="Yes",IF([Col-D]<>"",TRUE,FALSE),TRUE)
    Thanks
    Asher
    Fast, Cheap, Good. Choose any Two!

  • How to validate an attribute in a table/EO using a DB Table

    I have an attribute LocationId in DuplicateLocationEO(LocationId,LocationName)
    And I need a validation on this so that user can enter a LocationId that exists in LOCATION_ID of HR.LOCATIONS table
    How to validate an attribute in a table/EO using a DB Table?

    Issue: Insert a value into an attribute if it is valid, Like it is available in another table.
    Scenario: Insert a Location into a DuplicateLocationEO based on LocationEO.
    Solution: Create a Entity Validator on LocationId of DuplicateLocationEO that is list based on query of LocationEO’s LocationId.
    Note: if the validation is created at attribute level, then it leads to NPE or Undesirable results.
    Procedure Steps:
    Step#01: Open desired Entity Object “DuplicateLocationEO”, Go to “Overview” tab & “Business Rules” finger tab.
    Step#02: Select “Entity Validators” & Click “+”
    Step#03: Set the following Rule Definition Tab:
    •     Select Rule Type as “List”
    •     Attribute “LocationId”
    •     Operator “In”
    •     List Type “Query Result”
    •     Enter SQL Statement “Select LOCATION_ID FROM LOCATIONS”
    Step#04: Now go to “Failure Handling” tab & Select radio button for “Error”.
    Step#05: Click the Magnifier link to create a message.
    Step#06: In the “Select Text Resource” popup. Provide the following
    •     Display Value: “Invalid LocationId: {LocationId}. Please enter a valid Location”
    •     Key: INVALID_LOC
    •     Description: message when user enters an invalid location.
    Step#07: Click “Save and Select” Button
    Step#08: Click “OK” Button
    Reference:
    DuplicateLocationEO DDL Script:
    CREATE TABLE "HR"."TEST_LOC"
    (     "LOCATION_ID" NUMBER NOT NULL ENABLE,
         "LOCATION_NAME" VARCHAR2(50 BYTE) NOT NULL ENABLE,
         CONSTRAINT "TEST_LOC_PK" PRIMARY KEY ("LOCATION_ID")
    USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS" ENABLE
    ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS" ;
    To Populate Rows:
    Insert into TEST_LOC select Location_id, city from LOCATIONS

  • How to validate the field when i am populating the data cursor to block

    Hi,
    I am populating data cursor to multi record block.
    Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
    If user enter negative values and decimal points in quantity filed i need to display message to user item level.
    Please do the needful how to do it.

    902434 wrote:
    Hi,
    I am populating data cursor to multi record block.
    Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
    If user enter negative values and decimal points in quantity filed i need to display message to user item level.
    Please do the needful how to do it.If you want to validate at entry level then use When-Validate-Item trigger and check the input and show message. Like
    If :quentity <0 then
    message('do not enter negative value');
    message('do not enter negative value');
    raise form_trigger_failure;
    end if;Why u open same thread again ? not closing one.. check this one
    </a>
    How to validate the field when i am populating the data cursor to block
    Hopes this helps
    If someone's response is helpful or correct, please mark it accordingly.

  • Re:How can we delete the concurrent node entry from the FND_NODE table

    HI ,
    11.5.10.2 on Oracle Solaris on SPARC (64-bit) .
    How can we delete the concurrent node entry from the FND_NODES table without running Autoconfig.
    Currently we are having 3 nodes RAC and we are deciding to remove one node from the RAC and all 3 nodes are registered as concurrent node with application but concurrent manager is running only on one node.
    Lot of the custom configuration we did it at application web tire level. If we run the Autoconfig at that time we need to redo those changes again that we are trying to avoid.
    Regards .

    we are trying to avoid to run FND_CLONE.setup_clean because it will delete all the nodes entries from the FND_NODES.If those entries are invalid then they should be deleted.
    Running AutoConfig after purging the table will populate it with the correct entries.
    In order to populate the nodes entries again we need to run autoconfig and it will change the server id in fnd_nodes and then we need to redo the ADI client configuration on users PC and redo all the changes that we made in jserv and webserver.For ADI Clients, you should use the correct server ids which will be populated in the table for you once you run AutoConfig.
    For jserv configuration, you can refer to (Customizing an AutoConfig Environment [ID 270519.1]) to make the preserve all your custom setup/configuration after running AutoConfig.
    If there any custom script to delete only one node from the fnd_node so that we don't need to run autoconfig after that, then I really appreciate.No.
    Thanks,
    Hussein

  • How to access an attribute(this is referencing to another class) in a class

    Dear Gurus,
    I have to read an attribute of a class and that attributes type another class.
    I have intantiated the class and my question is how to read the attribute. I know I can not dirrectly read the attribute since this is another class. I think I have to first reference the attribute right? Please advise me.
    My code looks like below:
    data: lo_fpm                                 type ref to if_fpm.
    data: lo_msg_mgr                        type ref to if_fpm_message_manager.
    data: lo_component_manager    type ref to cl_fpm_component_manager.
    lo_fpm = cl_fpm_factory=>get_instance( ).    " cl_fpm_factory is a class which has a static method get_instance
    lo_msg_mgr = lo_fpm->mo_message_manager.
    lo_component_manager = lo_fpm->mo_component_manager.
    The above statement is giving syntax error. I do not know why.
    The basic difference b/n the two methods is if_fpm~mo_message_manager    type ref to if_fpm_message_manager    and
    mo_component_manager     type ref to cl_fpm_component_manager.
    Any help would be appreciated.
    Thanks,
    GSM

    Hello
    I cannot test the following coding because I do not get the singleton instance yet it should work:
    *& Report  ZUS_SDN_CL_FPM_FACTORY
    *& Thread: How to access an attribute(this is referencing to another class) in a class
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1398429"></a>
    REPORT  zus_sdn_cl_fpm_factory.
    DATA: go_fpm TYPE REF TO cl_fpm.  " class implements if_fpm.
    DATA: go_msg_mgr TYPE REF TO if_fpm_message_manager.
    DATA: go_component_manager TYPE REF TO cl_fpm_component_manager.
    START-OF-SELECTION.
      BREAK-POINT.
      go_fpm ?= cl_fpm_factory=>get_instance( ). " cl_fpm_factory is a class which has a static method get_instance
      CHECK ( go_fpm IS BOUND ).
      go_msg_mgr           = go_fpm->mo_message_manager.
      go_component_manager = go_fpm->mo_component_manager.
    END-OF-SELECTION.
    Regards
      Uwe

  • How to find and remove obsolete table entries from /SAPAPO/MATKEY table in EWM System.

    Hello,
    How to find and remove obsolete table entries from below tables in EWM System.
    /SAPAPO/MATKEY
    /SAPAPO/MATMAP
    /SAPAPO/MARM
    /SAPAPO/MATLOC
    /SAPAPO/MATMOD
    /SAPAPO/MATRQ
    /SAPAPO/MATLOTSZ
    Thank you,
    Pravin

    Pravin,
    First, tell me how you determine that these entries are 'obsolete'.
    Removing master data from SCM can usually be done using transaction WUF; however, you have to ensure that it is not re-sent to the SCM system, or you are just wasting your time.
    Best Regards,
    DB49

  • I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

    I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

    I've created a CNAME entry to redirect the domain to apple but the site is still not live! Can anyone help please?
    Did you also do what is required in the .Mac account settings?
    http://help.apple.com/mac2/1/help/member/pgs2/memfmsetgen367.html
    Could you provide your urls?

  • Calendar shows entries from another day

    Hi. My wife has an issue with her Z10 calendar after the last OS upgrade (now using the last official SW version 10.2.0.424). Her Z10 is configured with one Gmail account (with 2 calendars in it) and with one Facebook calendar. If she looks in the calendar (f.e. month view) and when switching between the days to look at the entries overview in this days, the calendar stars suddenly to show in a day entries from another day. Its very annoying. She has to close the calendar, start it again, than its correct again. But after a moment it starts again to do the same problem. We tried to restore the factory settings and restore the backup, but it didnt help. Do you have the same problem or do you know how to solve this issue, please?

    RobertP wrote:
    Hi. My wife has an issue with her Z10 calendar after the last OS upgrade (now using the last official SW version 10.2.0.424). Her Z10 is configured with one Gmail account (with 2 calendars in it) and with one Facebook calendar. If she looks in the calendar (f.e. month view) and when switching between the days to look at the entries overview in this days, the calendar stars suddenly to show in a day entries from another day. Its very annoying. She has to close the calendar, start it again, than its correct again. But after a moment it starts again to do the same problem. We tried to restore the factory settings and restore the backup, but it didnt help. Do you have the same problem or do you know how to solve this issue, please?
    I would to do the factory reset, but before restoring the backup, try the calendar(s) to see if the behaviour still there. It maybe some corruption in the setting that is the cause, and when you restored the settings it may have restores the corrupt one as well.
    Using the Playbook and the Z10 and the Z30 and loving them
    Martin

  • How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive w

    How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
    The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.

    If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
    You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
    Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
    There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
    You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
    See:
    http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See http://kb.mozillazine.org/Profile_folder_-_Firefox
    "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
    See http://kb.mozillazine.org/Show_hidden_files_and_folders
    Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
    You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files.

  • After upgrading to Photos, how can I work on a Book Project from another apple device?

    After upgrading to Photos, how can I work on a Book Project from another apple device?

    I'm not sure I understand what you are asking, but on the device/Settings, do you have iCloud and Photos sync turned on?

  • How do i access my mac email account from another computer?

    How do I access my mac email account from another computer?

    Go to http://www.icloud.com/ and sign-in

  • How to Find out the Name of the Table in Data Sources

    Hi All,
    How Can i find out the table names used in data Sources.
    For EX. Suppose I want to find out the table Names  in R3 Used In GL Data Source 0FI_GL_4.
    Thanks in Advance.
    Vaibhav A

    Hi,
    Usefull link:
    https://wiki.sdn.sap.com/wiki/display/BI/BW%20SD%20MM%20FI%20DATASOURCES
    Regards.

  • My one DAG fail then how to run e-mails in my organisation from another DAG that is located another Location.

    Hi
    DAG Failed then how to run e-mails in my organisation from another DAG.
    means the another DAG work automatically or i will do something for outside the DAG.
    Regards
    Anil kumar Gangwar

    Hi,
    In order to resolve the problem more efficiently, I need to clarify some information.
    1. Do you have two AD sites in your environment?
    2. If you have two AD site, do you have active users in these two AD sites?
    3. Does each AD site have a DAG which is cross-site?
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • My Gf has my iphone. How can I see recent messages and calls from another device?

    My Gf has my iphone. How can I see recent messages and calls from another device?

    Depending on your carrier, you may be able to see recent calls by logging into your account on the carrier's web site, if they offer such a feature, though incoming calls being shown is not usual. There will, as diesel said, be no way to see messages already received, either SMS/MMS or iMessages, without having the phone.
    Regards.

Maybe you are looking for