How to verify receiver jms scenarios with content conversion

Hi All,
I m doing a Content Conversion at receiver JMS Side.
The jms queue is installed in a Mainframe System. i heard that messagesa will be showed only in hexadecimal mode in mainframe system.
So how to verify my scenario?
Is there any way i can check the content cnversion part?

Hi,
Hope these links will help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ffd890-0201-0010-708f-d5dad2dfcf3a
fine tuning
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/412290ec-0201-0010-0790-dfd946efc5f4
FCC @ receiver
File Receiver with Content Conversion
FCC @ sender
Content Conversion (Pattern/Random content in input file)
regards,
Prashant

Similar Messages

FCC: Problems with content conversion

Dear all,
I have a receiver FTP adapter with content conversion. In RWB I'm facing following error message:
Adapter Framework caught exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'FCOTUPI')', probably configuration error in file adapter (XML parser error)'
The field with value FCOTUPI could be found in POS recordset. I double check the length of columns but couldn't find
an error.
CC configuration:
Recordset structure: HEADER,POS,SUBPOS
HEADER.fieldFixedLengths = 8,4,8
POS.fieldFixedLengths = 8,20,15,3
SUBPOS.fieldFixedLengths = 5,5
HEADER.fixedLengthTooShortHandling = Cut
POS.fixedLengthTooShortHandling = Cut
SUBPOS.fixedLengthTooShortHandling = Cut
As you can see by the names, I am using as XML to convert a structure with subnodes. In documentation it said
that it is not allowed, but in some threads I found the information that structure could be processed.
Any ideas how to solve this problem?
Thanks
Chris

Dear Amit,
thanks for your answer. I already checked this blog, but hoped for other solutions.
My problem: I tried to map my hierarchical structure to a flat structure.
Source
Struc1 (0..unbounded)
-Item1.1
-Struc2 (0..unbounded)
--Item 2.1
--Struc3 (0..unbounded)
---Item3.1
Target:
Struc1 (0..unbounded)
-Item1.1
Struc2 (0..unbounded)
-Item 2.1
Struc3 (0..unbounded)
-Item3.1
But if e.g. the Struc2 appears two time it will be created two time in target structure before
the Struc3 is created. But ths Struc3 belongs to Struc2 and should be created in flat file under
Struc2 directly.
How can we created a flat structure like this
Struc1
Struc2
Struc3
Struc3
Struc2
Struc3
Thanks
Chris

Content from my Apple TV only displays on about 50% of the screen on my 40" 1080p flatcreen. How do I fill the screen with content?

Content from Apple TV 2 only displays in about 50% of the screen on my 40" 1080p flatscreen. How do I fill the screen with content?

Check TV remote for an aspect ratio control (occssionally zoom) and set to 16:9.

How to send/receive e-mails with sql or pl/sql

Hello,
I must send and receive e-mail (something like e-mail client) done with oracle database and oracle forms.
How can I receive e-mails with SQL? Is there any way?
I read threads about using utl_smtp but i could not send an e-mail. May be I need to use servers without password?
Best regards
P.S. I'm using Forms 10g R2 and database 9i

Hi,
try below code.
change mailhost ip to u r mail server ip.
CREATE or REPLACE PROCEDURE SimpleTextMessage IS
mailHOST VARCHAR2(64) := '192.168.0.21';
mailFROM VARCHAR2(64);
mailTO VARCHAR2(64);
mailCONN utl_smtp.connection;
mailDATE VARCHAR2(20);
vreply utl_smtp.reply;
vreplies utl_smtp.replies;
i number;
BEGIN
mailFROM := '[email protected]';
mailTO := '[email protected]';
SELECT TO_CHAR(SYSDATE,'MM/DD/YYYY HH24:MI:SS') INTO mailDATE FROM dual;
vreply := utl_smtp.open_connection(mailHOST, 25, mailCONN);
vreplies := utl_smtp.help(mailCONN, 'HELP');
for i in 1..vreplies.count loop
dbms_output.put_line( 'text = ' || vreplies(i).text );
end loop;
vreplies := utl_smtp.ehlo(mailCONN, mailHOST);
for i in 1..vreplies.count loop
dbms_output.put_line( 'text = ' || vreplies(i).text );
end loop;
vreply := utl_smtp.mail(mailCONN, mailFROM);
vreply := utl_smtp.rcpt(mailCONN, mailTO);
vreply := utl_smtp.open_data(mailCONN);
utl_smtp.write_data(mailCONN, 'Subject: '|| 'Hi' || chr(13));
utl_smtp.write_data(mailCONN, 'From: '||mailFROM || chr(13));
utl_smtp.write_data(mailCONN, 'Date: '||mailDATE || chr(13));
utl_smtp.write_data(mailCONN, 'To: '||mailTO || chr(13));
utl_smtp.write_data(mailCONN, 'CC: '||mailFROM || chr(13));
utl_smtp.write_data(mailCONN, chr(13));
utl_smtp.write_data(mailCONN, 'Hello Friend how r u.' || chr(13));
vreply := utl_smtp.close_data(mailCONN);
END;
/

HT5312 how to verify my apple id with itunes

how to verify my ipod touch with itunes?

You will get an email sent to the email address you provided with a link that you need to click on.

Creating a file with content conversion

Hi all,
I have a scenario in XI which i create a file in it,
I want to create the file with the content conversion option but with no field separator.
I have an error message - "File adapter receiver channel is not initialized. Unable to proceed: null" if i don't use the fieldSeperator option.
I don't want to use this option, I want the file to be created without separators.
Thanks,
Naama

Hi Namma,
Go through very imp blogs:
File Content prameters for the Receiver Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Refer
File Receiver with Content Conversion
File Receiver with Content Conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites:
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
The specified item was not found. - FCC
File Content Conversion for Unequal Number of Columns
File Content Conversion for Unequal Number of Columns - FCC
Content Conversion (Pattern/Random content in input file)
Content Conversion (Pattern/Random content in input file) - FCC
XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
Thanks,
Satya Kumar

File Adapter with Content Conversion

Hi -
I am trying to convert a Flat file which has data as
firstnamelastnamecompanyName
Now i have created a message type which has a root name as Contact and its children are FirstName,LastName,Company.
And in the configurator i have created a file adapter with the content conversion, but being very new to XI i have never used a file adapter with content conversion. This is what i have in my Content Conversion Parameters.Please correct my code.
Document Name :: MT_Contact
Document Namespace :: http://venkat
Document Offset :: i did not enter anything here
Recordset Name :: RootNode(i gave this name just like that,,, Should it be something from the IR??
Recordset NameSpace:: i did not enter anything here
Recordset Structure:: Contact (this is the name in my IR
Recordset Sequence :: Ascending
Recordsets per Message :: Contact,* (Can someone explain what should be given here)
Then in the bottom in the name value pairs i have given
Contact.fieldNames = FirstName,LastName,Company
Contact.fieldSeparator = #
When i am using the above configuration the error i am getting in RWB is Error: Conversion initialization failed: Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Format error in 'xml.recordset' argument: incomplete structure (name,number) pairInvalid 'xml.recordsetsPerMessage' value 'Contact,*' found
I am very new to XI and i am unable to understand what exactly each field means in the file adapter when the content coversion is used. Can someone take the pain of explaining them.
Thank you
Venkat

Hi,
Use the following to create an XML strucutre like this,
<MT_CONTACT>
<CONTACT>
<FirstName> </FirstName>
<LastName> </LastName>
<CompanyName> </CompanyName>
</CONTACT>
<MT_CONTACT>
DocumentName : MT_TEST
DocumentNamespace : Yournamespace
RecordserName : record
RecordsetStructure : CONTACT,1
In the table,
ignoreRecordsetName : true
CONTACT.fieldNames : FirstName,LastName,CompanyName
CONTACT.fieldSeparator : #
Go through the links suggested by moorthy and also these blogs to understand content conversion better,
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
Regards,
Bhavesh

File sender with content conversion and ignoreRecordsetName

Him,
I have an scenario with a compressed file sender with content conversion.
In my sender cc i have:
1     AF_Modules/PayloadZipBean     Local Enterprise Bean     unzip
2     AF_Modules/MessageTransformBean     Local Enterprise Bean     transform
3     CallSapAdapter     Local Enterprise Bean     2
In module configuration, I have also added:
xml.ignoreRecordsetName --> true
But RecordsetName is not removed from XML
Why?
thanks, in advance
Carme

Hi,
No need to enter anything in module configuration. Just specify following Name-Value pair in the table provided on the Content Conversion tab of your file adapter.
Add a row with Name = ignoreRecordsetName and Value = true (Both case-sensitive)
For details, see [this link|http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm].
[some more here|http://www.riyaz.net/blog/index.php/2008/02/20/xipi-file-content-conversion-for-complex-structures/]
Regards,
Riyaz

Character Encoding for IDOC to JMS scenario with foreign characters

Dear Experts,
The scenario is desribed as follows:
Issue Description:
There is an IDOC which is created after extracting data from different countries (but only one country at a time). So, for instance first time the data is picked in Greek and Latin and corresponding IDOC is created and sent to PI, the next time plain English and sent to PI and next Chinese and so on. As of now every time this IDOC reaches PI ,it comes with UTF-8 character encoding as seen in the IDOC XML.
I am converting this IDOC XML into single string flat file (currently taking the default encoding UTF-8) and sending it to receiver JMS Queue (MQ Series). Now when this data is picked up from the end recepient from the corresponding queue in MQ Series, they see ? wherever there is a Greek/latin characters (may be because that should be having a different encoding like ISO-8859_7). This is causing issues at their end.
My Understanding
SAP system should trigger the IDOC with the right code page i.e if the IDOC is sent with Greek/Latin code page should be ISO-8859_7, if this same IDOC is sent with Chinese characters the corresponding code page else UTF-8 or default code page.
Once this is sent correctly from SAP, Java Mapping should have to use the correct code page when righting the bytes to outputstream and then we would also need to set the right code page as JMS Header before putting the message in the JMS queue so that receiver can interpret it.
Queries:
1. Is my approach for the scenario correct, if not please guide me to the right approach.
2. Does SAP support different code page being picked for the same IDOC based on different data set. If so how is it achieved.
3. What is the JMS Header property to set the right code page. I think there should be some JMS Header defined by MQ Series for Character Encoding which I should be setting correctly) I find that there is a property to set the CCSID in JMS Receiver Adapter but that only refers to Non-ASCII names and doesn't refer to the payload content.
I would appreciate if anybody can give me pointers on how to resolve this issue.
Thanks,
Pratik

Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam

Problems with content conversion in File Receiver Adapter

Hello, everybody.
 I have a RFC-to-File scenario with file content conversion. Everything is working well except that my file is generated with 2 blank lines at the top of it.
 The function module has 3 importing parameters (1 optional) and the file content comes from an internal table.
 Is it caused by the function module parameters? If yes, how can I avoid this, once I really need them? If not, does anyone have any idea?
 Thanks a lot,
 Marcos.

Hi, Raj.
Here they are the function module parameters:
Importing parameters:
 ICARRIER TYPE CHAR1
 FPATH TYPE IPATH
 IFILE LIKE VBAK-BNAME
Tables
 IYLASDS_RECPT LIKE YLASDS_RECPT
The structure YLASDS_RECPT has only one field with a single line of the file. I am using this field as the Recordset Name inside file adpater parameters.
There is no mapping between RFC and FTP messages.
Thanks a lot,
Marcos.

Dynamic file name in receiver - empty line problem with content conversion

Hi,
I do a variable substitution from a filename node in my xml structure. Because I don't want to have the the filename in my flatfile i supress the output with the conversion parameters:
filename.fixedLengthTooShortHandling = Cut
filename.fieldFixedLengths = 0
It's working but: the adapter is puting an empty line at the end of the file. If I even put the filename node at the top of the xml struture it generates the empty line at the top of the flatfile.
Anyone has an idea? is there an other way to set the filename or how can I supress this empty line( I have to) ?
Regrads
J.

Jorg,
Actually speaking we cannot get rid of this with XI. You have to write a OS script to remove this.
Else
you add one more parameter as .endSeparator as backspace ie., 0x08. It will definitely remove the line but I think it is putting a square box at the end of previous line. Please check by giving this and let us know the updates.
Regards,
---Satish

How to only have 1 image with content aware scaling

My knowledge (lack of, really) with content aware scaling is that 1st you create a new layer of the background and then rescale accordingly. I did the following: -1- Created a 2nd layer -2 used quick selection tool on my main subject ( a person) and named it. -3- deselected the selection -4- Edit menu --> Content aware scale -5- resized it to something smaller (chose my previous named selection channel). -6- Pressed "Enter"
The result is that I can now see 2 images; the smaller sitting on the larger. What now? All I want is the smaller image. If I throw away the original layer what I end up is the new layer with the white and gray default background showing as part of the image (which ends up being printed as well or if saved looking as is with the grey-white. Is what I should do the obvious--cut out via cropping the un-needed (gray-white) part? Or am I missing a step somewhere?
Thank you

My changing of image size had always been either by using the crop tool (which of course also removes parts of the image), or going to the top menu and choosing 'Iimage Resize' ( Alt + Ctrl + I). So using any method other than the one described alway had 'Content Aware Resize' greyed out and therefore unuseable hence me thinking a 2nd layer needed to be done. I had not been aware to use the marquee tool--so thanks. Either way though, when scaling down, it seems that cropping needs to bee done just the same. I was hoping there was a method where this was not required and could be done directly. Your method was defnitely helpful and saved me a step nevertheless so thanks. BTW, if I may, why does everywhere I go and have seen always show to create an extra layer? Your method seems to be better and actually shows creatin an extra layer to be totally useless so that is why I am asking since it seems to be totally not needed.

File to File scenario, file content conversion

HI there,
I am facing this scenario, flat file -> XI -> flat file. Files are fixed length ones and .txt.
the structure of the incoming file is something like:
field1field2field3field4
field1field2field3field4field5
That means that there is no separation between fields (neither comma nor space) and there are optional fields that may appear or not.
My aim is to transform this file into another file, XI will do some maps with some fields but the rest will be the same (same fieldnames and same field lengths). So, the outcoming file should be similar as the incoming one:
field1field2field3field4(transformed)
field1field2field3field4field5
These are my FCC parameters (i think i have to use FCC):
Row.fieldNames= field1,field2,field3....
Row.fieldFixedLengths=1,3,4....
Row.processConfiguration=FromConfiguration
Row.endSeparator='nl'
...and my data type structure:
DT_XX
Record
 Row
 field1
 field2
Here are my questions:
I have configurated the file content conversion in sender and receiver adapter, are they both necessary or should i only configurate the sender??
How can i manage the fields that are not mandatory?
What should be the transfer mode, binary or text?
I am a new come in development so, could anyone of you please give some support??
Thanks in advance and kind regards,
David

Hi David,
I have configurated the file content conversion in sender and receiver adapter, are they both necessary or should i only configurate the sender??
YES.
Suppose you only confgure it for sender then the target file that is generated will be in XML format.
How can i manage the fields that are not mandatory?
If the inbound structure has less fields than specified in the configuration then the XML outbound structure the you can set
Row.missingLastfields = ignore / add / error
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
What should be the transfer mode, binary or text?
If it is a txt file then text and set code page as UTF-8else binary.
Cheers,
*RAJ*

Sender file adapter with content conversion Simple XML

Hi experts,
I'm trying to parametrize my sender file adapter content conversion.
I'm receiving a text file with one single line like:
AA1;AA2; AA3;
and I want to convert it to an XML like
<MT_A1>
<field1>AA1</field1>
<field2>AA2</field2>
<field3>AA3</field3>
</MT_A1>
Actually I know how to do somenthing like
<MT_A1>
 <LINE>
 <field1>AA1</field1>
 <field2>AA2</field2>
 <field3>AA3</field3>
 <LINE>
</MT_A1>
What I want is remove the <LINE> tag from my XML.
Regards
Gonzalo
Edited by: Gonzalo del Castillo on Nov 28, 2008 2:18 PM

Hi
Use this help document for receiver FCC
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Content Conversion (Pattern/Random content in input file)
File conversion text to xml (Few Last Post)

JMS Adapter module content conversion

Hi,
I'm developing a module for the jms adapter(sender). My requirement is to parse the XI message(text) using some XML parsing api and do some formatting, logic etc and to make the jms adapter create a xml file with the processed information. Jms File Content Conversion does not suit our requirement and thats the reason we are trying this option.
My understanding is: Access the payload in the "process" method of the local ejb, apply XML parsing using JDOM etc, make a xml which should be the output of the jms adapter. This xml will be the xml with my user defined tag elements after content conversion. Can i form this xml and assign to the inputModuleData? Will the jms adapter use this string to create the xml and send to IS? Are there any other parameters to be set or processes to be done?
Also in which sequence should I put my adapter module in communication channel.
================================================
My code snippet:
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData)
 throws ModuleException
 Object obj = null; // Handler to get Principle data
 Message msg = null; // Handler to get Message object
 try
 obj = inputModuleData.getPrincipalData();
 msg = (Message)obj;
 AuditMessageKey amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---efore reading payload");
 try
 XMLPayload xmlpayload = msg.getDocument();
 String messageStr = xmlpayload.getText();
 String inputStr = null;
 String tags[] = new String[2];
 String values[] = new String[2];
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---before content conversion");
String tagvalue1 = messageStr.substring(messageStr.indexOf("BEGIN+"), messageStr.indexOf("'");
String tagvalue2 = messageStr.substring(messageStr.indexOf("'"), messageStr.lastindexOf("ENDING");
 tags[0] = "tag1";
 tags[1] = "tag2";
 values[0] = tagvalue1 ;
 values[1] = tagvalue2 ;
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---after content conversion");
 Document xmldoc = null;
 DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
 DocumentBuilder builder = factory.newDocumentBuilder();
 DOMImplementation impl = builder.getDOMImplementation();
 org.w3c.dom.Element e = null;
 Node n = null;
 xmldoc = impl.createDocument(null, "MT940", null);
 org.w3c.dom.Element root = xmldoc.getDocumentElement();
 for(int i = 0; i < tags.length; i++)
 e = xmldoc.createElementNS(null, tags);
 n = xmldoc.createTextNode(values);
 e.appendChild(n);
 root.appendChild(e);
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---before dom creation");
 DOMSource domSource = new DOMSource(xmldoc);
 ByteArrayOutputStream myBytes = new ByteArrayOutputStream();
 Result dest = new StreamResult(myBytes);
 TransformerFactory tf = TransformerFactory.newInstance();
 Transformer serializer = tf.newTransformer();
 serializer.setOutputProperty("indent", "yes");
 serializer.transform(domSource, dest);
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---before setting principal data");
 byte[] docContent = myBytes.toByteArray();
 if (docContent != null) {
 xmlpayload.setContent(docContent);
 inputModuleData.setPrincipalData(msg);
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---after setting principal data");
 catch(ArrayIndexOutOfBoundsException e)
 e.printStackTrace();
 catch(StringIndexOutOfBoundsException e)
 e.printStackTrace();
 catch(TransformerException e)
 e.printStackTrace();
 catch(Exception e)
 e.printStackTrace();
 catch(Exception e)
 ModuleException me = new ModuleException(e);
 throw me;
 return inputModuleData;

This is for sender channel. The doubt in adapter module is in the process block how will I get the main data being read by the jms adapter from the text file.As I am reading text file from websphere MQ, the content of the text file can be obtained thru xmlpayload.getText() or is there any other way.
obj = inputModuleData.getPrincipalData();
msg = (Message)obj;
XMLPayload xmlpayload = msg.getDocument();
String messageStr = xmlpayload.getText();
At present I am using my adapter module before call sap adapter, but before sap adapter there are two other modules(toBinary and to Xmb), so shld I place it before both or after both the modules.
Thanx in advance
Rachit

How to verify receiver jms scenarios with content conversion

Similar Messages

Maybe you are looking for