File to File scenario, file content conversion
HI there,
I am facing this scenario, flat file -> XI -> flat file. Files are fixed length ones and .txt.
the structure of the incoming file is something like:
field1field2field3field4
field1field2field3field4field5
That means that there is no separation between fields (neither comma nor space) and there are optional fields that may appear or not.
My aim is to transform this file into another file, XI will do some maps with some fields but the rest will be the same (same fieldnames and same field lengths). So, the outcoming file should be similar as the incoming one:
field1field2field3field4(transformed)
field1field2field3field4field5
These are my FCC parameters (i think i have to use FCC):
Row.fieldNames= field1,field2,field3....
Row.fieldFixedLengths=1,3,4....
Row.processConfiguration=FromConfiguration
Row.endSeparator='nl'
...and my data type structure:
DT_XX
Record
Row
field1
field2
Here are my questions:
I have configurated the file content conversion in sender and receiver adapter, are they both necessary or should i only configurate the sender??
How can i manage the fields that are not mandatory?
What should be the transfer mode, binary or text?
I am a new come in development so, could anyone of you please give some support??
Thanks in advance and kind regards,
David
Hi David,
I have configurated the file content conversion in sender and receiver adapter, are they both necessary or should i only configurate the sender??
YES.
Suppose you only confgure it for sender then the target file that is generated will be in XML format.
How can i manage the fields that are not mandatory?
If the inbound structure has less fields than specified in the configuration then the XML outbound structure the you can set
Row.missingLastfields = ignore / add / error
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
What should be the transfer mode, binary or text?
If it is a txt file then text and set code page as UTF-8else binary.
<b>Cheers,
*RAJ*</b>
Similar Messages
-
FIle Content Conversion Problem in IDOC-XI-File Scenario
Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like <b>%store_code%_%current_date%_sitemaster.xml</b> , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,<b>we have to suppress the current_date node of the xml content</b> . i have tried to suppress the current_date using these <b>DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut</b> , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
PrabhatIf u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy -
Problem in file content conversion, file 2 xml scenario
Hi,
Could some one help me in finding out the error in my file to xml scenario, please do consider the following things what I did for this scenario.
1.My sender file structure is flat file with , seperated 4 fields. On receiver end expecting xml file.
2.Did file content conversion at sender file adapter and given parameters as follows.
Document name : MT_FileInput
DocumentnameSpace : http://file/praveenworkshop
Recordset Name : DT_Record
Recordset Structure : DT_Row,*
KeyfieldType : String( default)
DT_Row.fieldnames : FirstName,LastName,City,PostCode
DT_Row.fieldSeparator : ,
DT_Row.processConfiguration: FromConfiguration
Dt_Row.endSeparator : 'nl'
3. I did check in Adapter Monitor that Both Sender and receiver adapter are showing green and It was showing 'Adapter is up and running: But no messages processed'
4. I did check the SXMB_MONI which was showing " Scheduled for Outbound processing"
5. In SXMB_MONI outbound processing payload was picking up the file and also inbound processing showing the same.
6. my source folder and destination folder are very simple c:/praveenfiles/input and c:/praveenfiles/output
files are source file praveen.txt and destination file praveenOP.xml
Please help me in finding out the error to see the output file in my output folder.Hi Praveen,
Hope these bloga are useful to you..
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Thanks,
Satya -
Idoc to File scenario: receiver content conversion
Hi,
I have a Idoc to file scenario in which each segment is to be sent in a new line.
Also, even if the segment is not present in Idoc, comma separated blank values are to be sent.
Till now I have been fllowing this blog
File Content Conversion for Multi Hierarchical Structure
But in this case, blank values csv line are not created.
When I used mapWithDefault for parent WPA12 then only 1 instance is created.
For eg.
WPA01
-WPA02
--WPA12
WPA01
-WPA02
--WPA12
There are no values in WPA12 segment
Output
WPA01,a,a,a,a
WPA02,b,b,b,b
WPA12,,,,,
WPA01,c,c,c,c
WPA02,d,d,d,d
Can I make any change in the approach as in the blog to get the desired output?
Regards,
Anirudh.Hi,
To explain more a bit..
My requirement is to create a flat file from multiple hierarchical xml structure.
Additionally, if the values are not present for some nodes then also I have to send the blank values in flat files. If entire segment is not present then also blank csvs needed to be sent.
regards, Anirudh. -
File content conversion scenario-empty file
Hi all,
I am doing file content conversion for my sender flat file. And I want to generate XML file in my receiver location.When I check with test tab in my message map in IR , no structure gets generated in RESULT.Overalls cenario is working fine and message is processed successfully but empty file is getting generated in target directory.When I check the payload in message content in RWB communication channel monitoring,it's picking data correctly from the file.I am not getting what might have gone wrong with my message mapping in IR. It's not showing any syntax error.Even it's not generating target message structure in Results window of test Messsage mapping.Could you suggest what mistake might be there in message mapping.Hi all,
I am getting this message in message monitor(SXMB_MONI).
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_MM_Flat_content_conv_:
RuntimeException in Message-Mapping transformatio~
I am able to see the output structure in test window of message mapping in IR and communication channel monitoring is also showing successful message.
fcc parameters used are:
Header.fieldNames KEY,EMPID,NAME,COMPANY,PHONE
Header.fieldFixedLengths 1,4,20,15,12
Header.processConfiguration FromConfiguratiion
Header.keyFieldValue H
Detail.fieldNames KEY,COMPANY,LOCATION
Detail.fieldFixedLengths 1,15,10
Detail.processConfiguration FromConfiguratiion
Detail.keyFieldValue D
Please suggest the mistake in mapping
Edited by: Jaya on Mar 3, 2010 12:45 PM
Edited by: Jaya on Mar 3, 2010 12:47 PM -
Complex file content conversion in case of CSV file
Hi Friends,
What you see below is generated from Excel i.e excel file saved as CSV file. This file i need to map in XI.
Problem is i have to take only the data and not the header part.
for e.g in this particular line
Employee ID :,,E00315
I need only E0315 and not the header value. Similarly i have to find some solution to map all the required data.
Please suggest me how to use file content conversion in such scenarios.
Solution is required on top priority. Points will be immdly rewarded.
Thanks & Regards
K.Ramesh
,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee ID :,,E00315,,,Sale Order No / Line Item :,,,SO123456,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee Name :,,K.RAMESH,,,Client Name :,,,NCLIENTELE,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Month / Week :,,Jul-08,,,Project Name :,,,Internal Project,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sales Team :,,,,,Project Role Start date :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Location :,,BANGALORE,,,Project Role End date :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sl. No.,Date,Day,AA Type, Task Description,,,,,No.of Hours,Remarks,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,7/1/2008,Tue,0814-Talent acquitision,task 1,,,,,12.00,rmk 1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
2,7/2/2008,Wed,0814-Talent acquitision,task 2,,,,,10.00,rmk 2,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
3,7/3/2008,Thu,0814-Talent acquitision,task 3,,,,,12.00,rmk 3,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
4,7/4/2008,Fri,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
5,7/5/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
6,7/6/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
7,7/7/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
8,7/8/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, , , ,,,,,,,,,,,,,,,,,,,,
9,7/9/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
10,7/10/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
11,7/11/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,, , ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
12,7/12/2008,Sat,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
13,7/13/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,
14,7/14/2008,Mon,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15,7/15/2008,Tue,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
16,7/16/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
17,7/17/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
18,7/18/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
19,7/19/2008,Sat,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
20,7/20/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
21,7/21/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
22,7/22/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
23,7/23/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
24,7/24/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
25,7/25/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
26,7/26/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
27,7/27/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
28,7/28/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
29,7/29/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
30,7/30/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
31,7/31/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Prepared By:,,,,,Approved By:,Company Project Manager,,,,Client Project Manager,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Name,,K.RAMESH,,,Name,YYY,,,,ZZZ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Signature,,,,,Signature,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Date ,,31.07.2008,,,Date ,31.07.2008,,,,31.07.2008,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Hi,
In this CSV file, what all i need is the value E00315 after the label Employee ID. I used in FCC the parameters u asked me to do. Also in the Document Offset i gave value 3 so that the first three lines are ignored.
1,,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,Employee ID :,E00315
But still i am getting the error
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 4 according to structure 'tims_header':java.lang.Exception: ERROR in configuration / structure 'tims_header.': More elements in file csv structure than field names specified!
Please help.
Thanks
Ramesh -
File is not creating on the Receiver for File Content Conversion
Hi,
i have created a scenario with this blog
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
for sender side i am using File Content Conversion to read .txt file and on receiver side i need xml file i have done that.
when i placed the file in the sender folder it gets picked up and i checked in Communication Channel monitporing in Runtime WorkBench it is processed Successfully. but no XML File is created on the Receiver side. i am unable to see the messages on SXMB_MONI also.
Please suggest some ideas to solve this.
Thanks,
Giridhar.CHi Giridhar.
unable to see the messages on SXMB_MONI also
If the file got picked and in Communication Channel monitoring RWB you can see that it is processed without any errors ,, then i feel it should come in come.Please check the Audit log in RWB, there you can see the error message if any.
Please check the connection parameters in FTP and make sure that the same sender folder is
not being used by any other scenario.If you have done any recent changes then do a cache refresh .
Please post if you see any error in content conversion.
Regards
Srinivas -
File Content Conversion Parameters in FIle Adapter
Hi
I am doing a scenario - XML file to Text file using File content conversion parameters in Receiver File Adapter Channel.
I given FCC Parameters like:
DATA.addHeaderLine - '0'
DATA.fieldSeparator - ,
DATA.endSeparator - 'nl'
But im getting error in Receiver File Adapter as - fieldSeparator not specified.
i would be greatful if any one help me.
Regards
RajeshHi Rajesh,
There are lot of blogs which explain File Content Conversion in different scenarios:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
I hope this helps.
Regards.
Praveen -
File Content Conversion Error in PI 7.1 (file to Proxy)
Hi
I am working on File to Proxy Scenario and I gave the File content conversion as below, File is picking up by the PI Server when I look at Communication Channel Monitoring, However when I open the Message ID in the CC monitoring it says as
404 Not Found
The requested resource does not exist.
and I do not see any message SXMB_MONI(Because the content is not converted), Can anyone give an idea how to debug this
Thanks
PR
Please find the details below which I gave in the content Conversion
Document Name : MT_TW_AK
Document NameSpace : http://aiwcd.com/Claims_Management(CM)_Rel2.0
RecordSet Name : FROISROIAcknowledgement
RecordSet Structure : Header,1,Record,*,Trailer,1
Recordset Sequence : Ascending
KeyField Name :TransactionSetID
Key Field Type : String (Case Sensitive)
IgnoreRecordsetName : true
Header.fieldNames :TransactionSetID,SenderID,ReceiverID,DateTransmissionsent,TimeTransmissionsent,OriginalTransmissionDate,OriginalTransmissionTime,TestProductionCode,InterchangeVersionID
Header.fieldFixedLengths: 3,25,25,8,6,8,6,1,5
Header.keyFieldValue : H
Record.fieldSeparator :
Record.fieldNames : TransactionSetID,RecordSequenceNumber,DateProcessed,TimeProcessed,InsurerFEIN,ClaimAdministratorPostalCode,ClaimAdministratorFein,AcknowledgementTransactionSetID,ApplicationAcknowledgmentCode,InsuredReportNumber,ClaimAdministratorClaimNumber,JuridictionClaimNumber,MaintenanceTypeCode,MaintenanceTypeCodeDate,RequestCode,FreeFormText,NumberofErrors,MaintenanceTypeCorrectionCode,MaintenanceTypeCorrectionCodeDate,JurisdictionBranchOfficeCode,ClaimAdministratorAlternatePostalCode,NumOfErrors
Record.fieldFixedLengths: 3,9,8,6,9,9,9,3,2,25,25,25,2,8,3,60,2,2,8,2,9,19
Record.keyFieldValue : A
Trailer.fieldNames:TransactionSetID,DetailRecordCount,TransactionCount
Trailer.fieldFixedLengths: 3,9,9
Trailer.keyFieldValue : T
ignoreRecordsetName: truePR,
Can you check the error in sender communication channel?
Go to RWB ---> Component Monitoring ---> Adapter Engine ---> Communication cahnnel monitoring --> it displays new page. Then give your file sender communication cahnnel name. There you will definitely see some error.
The error what you are getting is a different to this one. Can you please check the error what I have given above path.
Regards,
---Satish -
Trailing spaces problem during file content conversion
I have developed a proxy to file scenario.And am using file content conversion for creating the file. The file is to be a fixed length file.
File Structure
<Header>
<Item>
<Item Trailer>
<File Trailer>
Each tab in the file has the last character mapped to spaces.
Eg: Header00000001 2006011700000000020060<blank space>
Item00000001 2006011700000000020060<blank space>
The problem is that during file content conversion. XI does not preserve trailing spaces at the end of the line i.e.if a particular line in the file ends with space. It terminates the line at the last non-space character (in this case at 060).
However we are required to maintain these trailing spaces at the end of each line.
I have tried preserve white space in data type that does not work.
I know that xslt mapping may solve the problem but I am looking for a workaround with my current graphical mapping.
Looking for suggestions !!
Thanks,
RashidaHi,
I have the problem quite opposite to this where we are getting the trailing spaces at end of each record which should not come.
File structure is
<Record>
- <Data>
<Content>11/09/2007@210@ZACSL007@GBB-56436@PS01@29@1044@19@646@0</Content>
</Data>
</Record>
............. n records
<Header>
<File_Name>UK01</File_Name>
</Header>
Record structure in communication channel used is
Header, Data
Data.fieldFixedLengths 1024
Data.addHeaderLine 0
Header.addHeaderLine 0
Header.fieldFixedLengths 0
Header.fixedLengthTooShortHandling Cut
Data.fixedLengthTooShortHandling Cut
Header.endSeparator '0'
Actually if the length of record is less than 1024, rest of the length is being filled with spaces which should not occur.
Many advanced thanks.
Jitender -
Hi All...
I am facing a Problem with File Content Conversion in sender File Adapter .
In my scenario file contains 3 rows (nodes ) of Data but actually the structure of the source is with 4 nodes ,if i do the File Content conversion for 4 nodes i am getting an error
stating 3 rd row is missing...
Hear i have mentioned Keyfiled value for Each row ...for Each row like ROU,HDR,KLP,CTR
In the File KLP row is missing ...how can i handel that .. ?
thanks in Advance
shakifif ur file will have only those 3 key field values Y do u add the 4th key field (i mean the extra row) in the FCC. if u skip that in content conversion what happens?
in teh source structure for this extra node change the occurance to 0... -
Problem with Sender Adapter File Content Conversion
Hi all!
I have a question about file content conversion in sender file adapter.
I have file like:
{field1
field2
field3
field4
$
{field5
field6
field7
field8
And i need to get file like:
<dealings>
<deal>
<field1>{field1</field1>
<field2>field2</field2>
<field3>field3</field3>
<field4>field4</field4>
<field5>-}*</field5>
</deal>
<deal>
<field1>{field5</field1>
<field2>field6</field2>
<field3>field7</field3>
<field4>field8</field4>
<field5>-}*</field5>
</deal>
</dealings>
I put content conversion parameters:
deal.fieldSeparator = $
deal.fieldNames = field1,field2,field3,field4,field5
And i get a file like:
<ns:mt_swift_file>
<dealings>
<deal>
<field1>{field1</field1>
</deal>
<deal>
<field1>field2</field1>
</deal>
<deal>
<field1>field3</field1>
</deal>
<deal>
<field1>field4</field1>
</deal>
<deal>
<field1>-}*</field1>
</deal>
<deal>
<field1/>
</deal>
<deal>
<field1>{field5</field1>
</deal>
<deal>
<field1>field6</field1>
</deal>
<deal>
<field1>field7</field1>
</deal>
<deal>
<field1>field8</field1>
</deal>
<deal>
<field1>-}*</field1>
</deal>
</dealings>
</ns:mt_swift_file>
What i do wrong?
As i understand, XI put string to a separate tag after symbol 'nl', but how can i get structure without unnecessary tags?Hi,
Check some links for FCC
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani -
Doubt regarding Sender adapter file content conversion to RFC
Hi Experts,
Below is the my Source and Target XML structure ( i have creaated source structure same as target RFC structure), This scenario is working fine when i give XML file as input. File -> XI -> RFC , xml file is able to update the information in R3.
How should i configure sender file adapter for file content conversion for above structure(in this case input is fixed lenth text), and i could able to change source structure according to our req, without changing target RFC strucuture.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_HSA_IDNumber xmlns:ns0="urn:passhe.com/UpdateIdNumberISA32">
<COMMIT_I>X</COMMIT_I>
<IDENTIFICATION>
<STUDENT>6500001191</STUDENT>
<ID_TYPE>FS0030</ID_TYPE>
<ID_NUMBER>testxml</ID_NUMBER>
<VALID_FROM>20070421</VALID_FROM>
<VALID_TO>20091231</VALID_TO>
</IDENTIFICATION>
</ns0:MT_HSA_IDNumber>
I have configured sender file adapter with FCC like :
Document name as: MT_HSA_IDNumber
Document name space as: urn:passhe.com/UpdateIdNumberISA32
Record structure as: COMMIT_I,1,IDENTIFICATION,1
COMMIT_I.fieldNames : COMMIT_I
COMMIT_I.fieldFixedlengths: 1
IDENTIFICATION.fieldNames: STUDENT,ID_TYPE,ID_NUMBER,VALID_FROM,VALID_TO
IDENTIFICATION.fieldFixedlengths: 12,6,60,8,8
i am getting error like this: even when i change source structure like below metioned:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_HSA_IDNumber xmlns:ns0="urn:passhe.com/UpdateIdNumberISA32">
<COMMIT>
<COMMIT_I>X</COMMIT_I>
</COMMIT>
<IDENTIFICATION>
<STUDENT>6500001191</STUDENT>
<ID_TYPE>FS0030</ID_TYPE>
<ID_NUMBER>idnumber1</ID_NUMBER>
<VALID_FROM>20070421</VALID_FROM>
<VALID_TO>20091231</VALID_TO>
</IDENTIFICATION>
</ns0:MT_HSA_IDNumber>
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'COMMIT_I.fieldFixedLengths' or 'COMMIT_I.fieldSeparator' is missing Consistency check: no. of arguments in 'COMMIT_I.fieldFixedLength' does not match 'COMMIT_I.fieldNames' (0 <> 1)
Please help me out
thanks
dhanushHi Dhanush,
Try giving the Sender FCC this way for the source structure you have mentioned above.
Record structure as: COMMIT,1,IDENTIFICATION,1
COMMIT.fieldNames : COMMIT_I
COMMIT.fieldFixedlengths: 1
Hope this helps.
Thanks and Regards,
Induja -
Error in configuring File Sender Adapter with File Content Conversion
Hi
i am designing a File to File scenario using file content conversion in which the input is comma separated file and output is a XML document.
mentioned below are the configuration information:
Recordset Name: Substr
Substr.fieldSeparator: ,
Substr.endSeparator: 'nl'
Substr.fieldNames: Name, Password
Substr.keyFieldValue: Name
and the error i can see in adapter framework is:
Sender Adapter v0830 for Party '', Service 'FileContentConversion':
Configured at 14:30:45 2005-04-07
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Mandatory parameter 'Substr.fieldNames': no value found
plz help me ASAP.
thanks and regards,
Varun JoshiHi Varun...
Regarding ur error.....the name and password u send in csv is not getting recognised.. so u have to check the data type structure.
there must be a recordset name and subelement must be recordset structure..the data type must be
<datatypename>
<recordsetname>
<recordsetructurename>
<name>
<password>
please try in this format and ur name and password will get recognised -
Supress Column Heading - File Content Conversion in Sender Adapter
Hi,
Let me give a more clear picture about my scenario. I need to convert CSV File to XML output:-
My source file has column heading and values. The sample data is mentioned hereunder:-
PERNR;KID;PNALT;NACHN;NAME2;VORNA
;1200;1200;Angus
I have created a data type as under:-
DT_LegacyEmployee (Category - Complex Type)
Employees (Category - Element, Occurence - 1)
Header (Category - Element, Occurence - 0...1)
PERNR_H
KID_H
PNALT_H
NACHN_H
NAME2_H
VORNA_H
Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
PERNR
KID
PNALT
NACHN
NAME2
VORNA
The file conversion parameters in the file sender adapter are mentioned hereunder:-
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Header,1,Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
I dont' have a key field value. How do we remove the header and show only the values in the xml output. I have searched the forum topics as well checked many blogs related to file content conversion, but nothing helped. Kindly advice how to fix this issue. Thanks in advance.
Regards.
PraveenHi Praveen,
Change your File Adapter as below
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
There is no need for the Header required in the data type.
DT_LegacyEmployee (Category - Complex Type)
Employees (Category - Element, Occurence - 1)
Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
PERNR
KID
PNALT
NACHN
NAME2
VORNA
Now the trick is in the mapping program
Lets assume your mapping looks like
MT_LegacyEmployee ---> MT_TargetEmployee
- Employees ---> Records
- Employee ---> Record
- PERNR ---> TargetPERNR
- .. so on
When you do a mapping from Employee ---> Record apply the following logic.
(PERNR)--->
(TestEquals =) --->(NOT)--->
(Constant) ---> (IF)
(PERNR) (IF Without Else) ---> (Record)
(THEN)
(Employee)--->
When doing this make sure RightClick on PERNR and Select Context ---> Employees.
By default context would be from Employee and it will give you an error of XSD format. So make sure you are changing the context.
Maybe you are looking for
-
Photoshop crashes when trying to open any RAW files
Hi, I'm running PS 5.1 on a Mac Pro OS 10.7.5. Every time I try and open a RAW file (.DNG, .CR2 etc) Photoshop thinks about it then quits. I have uninstalled then re-installed PS, cleared the caches, deleted the PS settings, downloade and installed C
-
I click on any link that I know is a PDF file on Windows 7. IE 8.0 and the latest version of Adobe Reader. The link does not open in IE. Some I can do as a save as target others do not give me the option. Any Ideas????
-
Hi, Can somebody help me with a unique item on a tabular form. I have atabularform with 3 column. One column CODE must be unique. How should this be done?? Regard, Ekas
-
Dark area on screen, looks like smudge, anyone else seen something similar?
Hi, I got a new 16GB white 3G yesterday and love it! It's been a long wait for us here in Sweden, but now the iPhone is finally here. Just one problem: I have a small area of the screen that is visibly darker than the rest. It is situated about one i
-
Combined raw (nef) and jpegs
By way of introduction, as I am new here, I am a professional photographer in Southampton, England. I shoot just about most things but especially music and other stock, combined with weddings. I have shot a job using combined raw and jpegs on one car