How to verify that the SCCM data is importing in Service Manager properly

Hi,
we are using SCSM 2012 R2 with SCCM 2012 R2 connector.
How could I verify that the configuration manager data is importing properly in Service Manager.
Since many of the systems are not showing installed application in service manager that are showing in Configuration Manager, therefore, I have to verify that SCCM data is importing properly in Service Manager.
Further, we I check the incidents, affected CIs are missing or blank.
Please suggest.
Regards, Syed Fahad Ali

If you look at the history of the CI it will tell you everything that is being written to it. If some of your systems are not showing their installed software, you may want to check that the ConfigMgr connector is even syncing that particular machine.
If you look at the CI history and don't see any entries from "System Center Configuration Manager", the machine may not be in the appropriate collection. If you take a look at the configuration of the connector, you will see the collections that
are synced. In order for a machines information to be populated, it must be in one of the selected collections.
Matthew Dowst |
Blog | Twitter

Similar Messages

How to verify that the variable "does not contain" a value?

Hi
I am using CP 7.0.1.237.
We want to use Text Area widget for a custom quiz and verify an answer. While we figured out how to verify the existence of certain keywords, we are not able to figure out how to verify that the content should NOT contain certain keywords. For example, we want to ensure that the text entered in this widget should not contain "Transformation" and "Non-compliant".
Is this possible at all?
Thanks
Sreekanth

Here's what the solution might look like in JavaScript. This would be for SWF output and aimed at Cp 7. For Cp 8, this would still work for SWF output, but you'd probably want to take advantage of the new unified JS API that gets and sets Cp variables for both SWF and HTML5 output. You can read more about that here: Common JS interface
//Get the text area value from Captivate (SWF output Only)
var cpTextAreaValue = document.Captivate.cpEIGetValue('m_VarHandle.v_TextArea);
//convert the value to lower case to properly compare
cpTextAreaValue = cpTextAreaValue.toLowerCase();
//Check if text area value contains the words "transformation" or "non-compliant"
if(cpTextAreaValue.indexof('organizational') > -1 && cpTextAreaValue.indexof('behavioral ') > -1 && cpTextAreaValue.indexof('managerial') > -1 && cpTextAreaValue.indexof('transformation') < 0 && cpTextAreaValue.indexof('non-compliant') < 0){
//the text area has the correct answer so increment varScore
//get the current score from Captivate
var score = document.Captivate.cpEIGetValue('m_VarHandle.varScore');
//increment score by 1
score++;
//set score in Captivate
document.Captivate.cpEISetValue('m_VarHandle.varScore', score);
} else {
//the text area does not have the correct answer so show message to user inside of Captivate
document.Captivate.cpEISetValue('m_VarHandle.v_message', 'Answer is not correct');
This JS has not been tested. Note that the "does not contain" operator is done using the "indexof" operator in JS.
Jim Leichliter

How to verify that the request has been moved to Quality System

Hi friends,
I a new abaper and i need ur help in solving this issue.
I have developed an object and released( as per the suggestions given already in this forum). Its working well and i can see the request in released status in se09.
No what i really want is , How can i verify that the request has been moved to Quality System by the basis people, assuming that i have only access to dev system.

Yes, once u release the request, if it is successfullly released will make the request avaialble under released requests
As an ABAP'er this is enof
<b>wht abt me Sravanan :-(</b>
Regards
- Gopi
Message was edited by: Gopi Narendra

How to verify that the user has changed table row data before db update

Hi all,
Iam using Oracle ADF with EJBs.
I have a single selection table that displays rows of data returned from a function of my data control.
The columns of my table are editable so that the user can change the data. The user selects a row, changes the data in one or more columns of the row and saves the data by means of a submit button. The code in the submit button, identifies the row of the corresponding iterator that the user clicked on and updates the data in the database (using the 'mergeEntity' function of the EntityManager)
Before saving the data, I want to put some logic to check whether the user has actually changed some data to avoid unnecessary updates in the database . But for this I need a technique to detect that the user has indeed changed some data in the table row.
One technique I have been using so far was to isolate the iterator row of the table and then query the corresponding row in the database table and compare their values.
Except from dummy, this technique is not efficient if the table contains many rows.
Moreover, in my case I have observed that on successive updates on the same row , the query on the database returns the new values (user changed values) and not the actual values contained in the database table. This means that when the user updates an iterator row the cached data affect also the results of the SELECT statement from the actual database table!!! Isn't this strange ?
Can somebody propose me a neat method to detect when the user has changed the the data of an iterator row ?

Hey Alan,
The below solution seems overly complicated to me and can not be implemented without a custom screen and/or the use of JavaScript. Also, if your main concern is that a user may accidentally loose all their data because they closed the browser window or the session times out before they hit the save button then this solution does not help you.
There are a couple of simpler approaches you can take here:
# If the use of JavaScript is permissible you can hook into the windows 'onUnload' event, and pop-up a message box which gives the user the opportunity to cancel closing the window and save their case if they haven't already.
# Implement an autosave feature by hooking into one of events provided by web determinations. A simple (but rather naive) way of doing this would be to hook into the OnRenderScreenEvent and call save on the interview session every time the event fires. This guarantees that all the data the user has submitted will aways automatically be saved, thereby removing the need to make sure the user manually saves their data before closing the browser.
Automatically making Web Determinations close a browser window has to be done using JavaScript. However, doing so means that a) it won't work for people who turn off JavaScript, which is commonly done for accessibility reasons b) you'll likely run afoul of the browser's security mechanism (they generally won't let you close a window that you didn't open and some really don't like you doing that at all).
Thanks,
Kristy

How do I verify that the Citadel data tables Trace and Points are being updated?

I am using MSQuery to look at the data in my Citadel database, but it appears there is no data in the database. There are transactions in the A/E viewer. I am totally new to lookout and citidel. TIA.

Hi Jeff,
Here are some old articles on accessing Citadel 4 data from MSQuery and MSAccess. These should at least give you a starting point:
http://zone.ni.com/devzone/conceptd.nsf/webmain/85CECF0AEEC5B1B28625680800733CC6
http://zone.ni.com/devzone/conceptd.nsf/webmain/0A3D4EEAC9208065862568080072DB9F
Also, do you have NI-MAX? You can check for data in there too.
Hope this helps,
Khalid

How to verify that the system isn't infected with a virus

Does anyone know how to check to see if your system has been infected with any type of malware? I read in an article at zdnet.com that there was a Mac OS X trojan spotted, but the article did not say how to locate whether or not you had been infected. I do not have a virus checker on my computer. Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
Any comments?

fane_j wrote:
Sally R. wrote:
Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
This was published on MacWorld's site, and it's not a very good tip. Try this instead
ls -la /Users/Shared/*.so
Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
By bastion
Fri Feb 24 08:49:05 PST 2012
PeterSParker said
Your terminal statement has an extra "." in it that prevents it from working.
Also, you should add the options -alR to show what is happening, and to search subdirectories.
The revised command looks like this:
ls -alR /Users/Shared/*.so
The above is completely wrong. The command as shown in the article is appropriate.
The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
Because you're explicitly searching for things that start with "." you don't need the -a flag.
Because you only care about simple existence and not any metadata you don't need -l.
Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

Verify whether the session data is kept in the Coherence caches

I have successfully combined the MapViewer application with WebLogic and Oracle Coherence*Web.
How to verify whether the session data of MapViewer application is kept in the Coherence caches or not?
All out put show that both of MapViewer and WebLogic server as well as Coherence are running well.
All the following steps are right?
The procedure is as the following:
1. Create a WebLogic domain: Map_domain.
2. Start the WebLogic domain Map_domain by running startWebLogic.sh script.
3. Install Coherence.jar as a library on WebLogic.
4. Copy the coherence.jar in the WAR's WEB-INF/lib directory.
5. Create a reference to the shared library by modifying the weblogic.xml in web applications WEB-INF directory
and add the following contents:
<weblogic-web-app>
     <library-ref>
          <library-name>coherence-web-spi</library-name>
          <specification-version>1.0.0.0</specification-version>
          <implementation-version>1.0.0.0</implementation-version>
          <exact-match>false</exact-match>
     </library-ref>
<weblogic-web-app>6. Install Coherence-web-spi.war as a WebLogic library.
7. Install the MapViewer as a WebLogic application.
8. Start a Coherence cache server using the cmd file web-cache-server.cmd and then start MapViewer application.
The content of web-cache-server.cmd file:
@echo off
@rem This will start a cache server
setlocal
:config
@rem specify the Coherence installation directory
set coherence_home=F:\coherence
@rem specify the JVM heap size
set memory=256m
:start
if not exist "%coherence_home%\lib\coherence.jar" goto instructions
if "%java_home%"=="" (set java_exec=java) else (set java_exec=%java_home%\bin\java)
:launch
set java_opts="-Xms%memory% -Xmx%memory%"
"%java_exec%" -server -showversion "%java_opts%" -cp %coherence_home%\lib\coherence.jar;
%coherence_home%\lib\coherence-web-spi.war
-Dtangosol.coherence.management.remote=true
-Dtangosol.coherence.cacheconfig=WEB-INF/classes/session-cache-config.xml
-Dtangosol.coherence.session.localstorage=true
com.tangosol.net.DefaultCacheServer %1
goto exit
:instructions
echo Usage:
echo   ^<coherence_home^>\bin\cache-server.cmd
goto exit
:exit
endlocal
@echo onEdited by: jetq on Jan 13, 2010 9:32 AM

Any opinions are welcome.

Verify if the sessision data of MapViewer app is stored in Coherence caches

I have successfully combined the MapViewer application with WebLogic and Oracle Coherence*Web.
How to verify whether the session data of MapViewer application is kept in the Coherence caches or not?
All out put show that both of MapViewer and WebLogic server as well as Coherence are running well.
All the following steps are right?
The procedure is as the following:
1. Create a WebLogic domain: Map_domain.
2. Start the WebLogic domain Map_domain by running startWebLogic.sh script.
3. Install Coherence.jar as a library on WebLogic.
4. Copy the coherence.jar in the WAR's WEB-INF/lib directory.
5. Create a reference to the shared library by modifying the weblogic.xml in web applications WEB-INF directory
and add the following contents:
<weblogic-web-app>
     <library-ref>
          <library-name>coherence-web-spi</library-name>
          <specification-version>1.0.0.0</specification-version>
          <implementation-version>1.0.0.0</implementation-version>
          <exact-match>false</exact-match>
     </library-ref>
<weblogic-web-app>6. Install Coherence-web-spi.war as a WebLogic library.
7. Install the MapViewer as a WebLogic application.
8. Start a Coherence cache server using the cmd file web-cache-server.cmd and then start MapViewer application.
The content of web-cache-server.cmd file:
@echo off
@rem This will start a cache server
setlocal
:config
@rem specify the Coherence installation directory
set coherence_home=F:\coherence
@rem specify the JVM heap size
set memory=256m
:start
if not exist "%coherence_home%\lib\coherence.jar" goto instructions
if "%java_home%"=="" (set java_exec=java) else (set java_exec=%java_home%\bin\java)
:launch
set java_opts="-Xms%memory% -Xmx%memory%"
"%java_exec%" -server -showversion "%java_opts%" -cp %coherence_home%\lib\coherence.jar;
%coherence_home%\lib\coherence-web-spi.war
-Dtangosol.coherence.management.remote=true
-Dtangosol.coherence.cacheconfig=WEB-INF/classes/session-cache-config.xml
-Dtangosol.coherence.session.localstorage=true
com.tangosol.net.DefaultCacheServer %1
goto exit
:instructions
echo Usage:
echo   ^<coherence_home^>\bin\cache-server.cmd
goto exit
:exit
endlocal
@echo onEdited by: jetq on Jan 12, 2010 9:02 PM

Any opinions are welcome.

How to verify that embedded OC4J is loading Custom LoginModule?

I've written a custom login module to authenticate against a custom datastore. I've added a system property
java.security.auth.login.config=C:\javadev\...\jaas.configas recommended by Yvonne here: Re: Custom LoginModule used by BC4J
I still get the following when I load a UIX page out of this module:
msg=JBO-33021: Failed authenticate user nullThere are many debug System.out(...) statements in the code (including in the initialize() function) but none are showing up in the OC4J console. Does anyone know how to verify that the LoginModule is indeed getting loaded? Is it normal for these System.out() statements not to show in the OC4J console?
I get the impression that the LoginModule is not being loaded but I'm not sure if those traces are enough...
Thanks,
/sfl

Thanks much for the prompt reply and debugging tips Steve and Avi!
I used both switches (-DApplicationServerDebug and -verbose:class) and still no sign of the class being loaded; none of the traces (I did trace in the construct, though I failed to mention in my original post) nor do any of the app server or jvm debug messages show any sign of the LoginModule being loaded. So now I'm fairly certain I'm going about the wrong way to get this module loaded. Should I also be posting this to the JDeveloper forum?
My application module configuration is as follows:
jbo.security.config=<blank> (is this right?)
jbo.security.context=oracle.security.jazn
jbo.security.enforce=Must
jbo.security.loginmodule=customModuleThe command line to the JVM contains:
-Djava.security.auth.login.config=C:\javadev\jdev9052\j2ee\home\config\jaas.config[yes Avi, I was unfortunately imposed an M$ env. by the powers that be : ( ]
And, well I've been trying a lot of different things w/ the jaas.config file:
customModule{
myPack.controller.MyLoginModule required;
myApp{
myPack.controller.MyLoginModule required;
myPack.LookupModuleLocal{
myPack.controller.MyLoginModule required;
myPack.LookupModule{
myPack.controller.MyLoginModule required;
Ws-MyProg-webapp{
myPack.controller.MyLoginModule required;
default{
myPack.controller.MyLoginModule required;
current-workspace-app{
myPack.controller.MyLoginModule required;
};Any idea where I'm going wrong? Do I need to do anything else to get this module loaded? At first I thought I needed to modify the jazn-data.xml file but I saw a note in another thread Custom LoginModule used by BC4J which says that it's not necessary to modify it when using a custom LoginModule. Is this right, or should I be modifying that file?
Thanks,
java.lang.Object - jobject ;- )

HOW CAN I EXTRACT THE SYSTEM DATE?

HOW CAN I EXTRACT THE SYSTEM DATE?

import java.util.*;
import java.text.SimpleDateFormat;
public class date2{
    public static void main(String[] args){
        Date today = new Date();
        SimpleDateFormat output = new SimpleDateFormat();
        String answer = output.format(today);
        System.out.println(answer);
}If you want to make it prettier, you can look at using a locale, or a pattern string in the SimpleDateFormat constructor. Read the Documentation.
Note that new Date(), constructs a Date with the current Time,
you could also use: new Date(System.currentTimeMillis());
Hope this helps
-Philip.

HT4859 How can I verify that my App data is actually stored in iCloud. With Dropbox, I can actually see my stored files. With iCloud, itseems I'm supposed 2 just trust that Appl has the data. Short of doing a restore is there no way to check the data?

How can I verify that my App data is actually stored in the iCloud. I can see and access my notebook, contacts etc. on the iCloud website, and I can see my photos in a folder on my Windows-based desktop compter (iCloud/Photostream). But no app data.
With Dropbox, I can actually see all of my stored files. With iCloud, it seems, I'm supposed to just trust that Apple has my back. Short of deliberately trashing my app data and then attempting a restore, is there no way to check the data?

You can't access them on Windows (unless you have iCloud enabled Windows programs) and I don't think any are, yet.
iCloud data is accessed via Apps/Programs, the Windows programs vendors will have to step up (just to make it worse Microsoft have not yet enabled their Mac programs, such as Office yet) I doubt that iCloud access is much of a priority for them, complain to MS, when enough Windows users complain maybe they'll do something.

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201).

"Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201)"
This error keeps cropping up now and again on most of our domain controllers (OS-2008 AND 2008R2)...Usually a restart fixes the issue however the issue repeats and security logs don't generate.
Any advice on how to fix this issue permanently would be greatly appreciated.

Please see this: https://social.technet.microsoft.com/Forums/windows/en-US/95987ca3-a1b2-4da6-95b7-d825d06cdac7/error-code-4201-the-instance-name-passed-was-not-recognized-as-valid-by-a-wmi-data-provider?forum=w7itprosecurity
You can also try rebuilding the WMI repository: http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Hi, can you help? My emails that I have received show the date received as either today, yesterday or July 28. How can I get the correct date received?

Hi, The emails that I have received show the date received as either today, yesterday or July 28. How can I get the correct date received?

That's very scary. They might do it, but I personally have never had Apple contact me re id's except on their site when signing in. I suggest you DO NOT respond until you have a phone conversation with Apple security. They can verify if they sent you the e-mail and why.
While it's very possible it's true,again, I suggest you not respond until you speak to someone at Apple. I've often read here that when people sign in they are not allowed to because "someone else has used the id" type of statement.
Also, you should be able to go to the app store and see what apps you have downloaded.
Though it could have been a free app, have you checked to see if any were bought with your id account?
I've gotten these types of e-mails from places like USPS and FedEx which look amazingly authentic and were from their website. I also received an odd e-mail from my cousin in Ireland last year that clearly was not from him. It was also sent to others in his family in Ireland. I e-mailed him that I only opened it because it had a .ie, but suggested he change... Days later I received mail from 'him' - same name, but at yahoo.com.
Again, I would call Apple. You can also report it at [email protected], but I would not settle for that given your situation. If nothing else, call Apple sales (sales depts. anywhere answer fast) and ask them to transfer you to security. Apple will not want anybody accessing their name, and while it's unlikely, it's not impossible that it is someone phishing.
Hope this helps and can you let the support community know your results by posting on this thread when you're done? Thank you.
Hope this helps.

This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." How to fix this installation error?

Does anyone know, how to fix ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?

At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How to verify that the SCCM data is importing in Service Manager properly

Similar Messages

Maybe you are looking for