It takes long time to load the parameter's value when running we run report

Hi,
It takes long time to load the parameter's value when running we run report. What could cause this? How to troubleshoot the behavior of the report? Could I use Profile and what events should i select?
Thanks

Hi jori5,
Based on my understanding, after changing the parameter, the report render very slow, right?
In Reporting Service, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. To analyze which section take much time, we can check the table Executionlog3 in the ReportServer database. For more information, please
refer to this article:
More tips to improve performance of SSRS reports.
In your scenario, since you mention the query spends less time, the delay might happens during report processing and report rendering section. So you should check Executionlog3 to check which section costs most of time, then you can refer to this article
to optimize your report:
Troubleshooting Reports: Report Performance.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Similar Messages

Captivate project takes long time to load on LMS

So I developed a bunch of Captivate 7 modules for a course I'd been working on for some time. When I finally loaded these up on the LMS, I notice that when the modules are launched, a pop-up window opens with a grey background and just stays like that for up to 3-4 mins. I figured grey, because that's what I had set as the HTML page color in the skin editor. However the actual module contents take really long (3-4 mins) to load up. When I tried running all these modules locally from my computer, the grey screen fades into the splash animation within a second.
I figured that this was either due to a bandwidth issue or the LMS causing problems. So I then had these modules tested from our India and US offices (different internet connecttions, multiple LMSs). Same thing happened, takes up to 3-4 mins to transition from the grey screen to the splash animation (but loads up instantly when run locally). We then tried this on multiple LMSs like SABA, Moodle, and even tried this on SCORM Cloud and the same issue. The modules takes a long time to load up, so I kind of ruled out the LMS/bandwidth being an issue.
I'm speculating here, but what I think is happening is that the SCO is trying to download the entire module (about 10MB) to the users machine before it plays the splash animation -- if that's the case then is there a way to avoid that? I mean I don't want a 200 slide Captivate published project to be downloaded right from clicking the launch button -- it could stream through as the user advances through the module. Also, I've seen some pre-loader and Start/End options but not sure how those work.
Important to note here, the 3-4 min wait time from when the module is launched, is only for the first launch. If I were to close the browser popup (in which the SCO opened), and click launch again from the LMS, it's loads up almost instantly -- so I'm pretty sure something's happening in my Captivate project's loading settings which I can't put my finger on.
Can anyone help me figure out why this is happening and also what are some possible fixes to this. I can assure you that it's not an internet bandwidth issue because we've tested it on multiple internet connections and on several LMSs (even the client's LMS that this was tested on says that the initial load up takes too long).

All the symptoms you quote sure sounds like a bandwidth issue to me.
Obviously when you load a project directly from your hard drive then there's no issue with bandwidth. But if you're pulling down 10 megs from a web server and it takes a while to start then bandwidth is the obvious issue. I agree that 3-4 minutes sounds excessive for a 10 meg file but that depends entirely on how many users are sharing your bandwidth. Try getting your people in these different locations to visit one of those websites that allows you to test your actual bandwidth. It might not be as much as you think.
On another note...What do you have your preloader set to? The default is 100% but you can usually set it to something like 25% without too much trouble. That should cut the start time down appreciably but nothing is going to eliminate it completely because there'll always be some initial lag the first time your learners view the content.

Query takes long time to load

Hello experts,
My users have queries on a MultiProvider. Today, the queries take a long time to load. When they want to put a filter on it, the selection pop-up takes a long time to show the possible selections.
Is there any way to find out what causes the long wait time? And what can I do about it, to optimize it?
Thanks in advance.

Hi Erica,
Please check load on system(how many users are logged in..?)
Please check : [Checklist for Query Performance|http://sapbwneelam.blogspot.com/2007/10/checklist-for-query-performance.html] some tips for query performance.
Hope it Helps
Srini

Gif files takes long time to load..!!

Hi,
I found the gif/jpg files takes long time ( more than 5 or 6 seconds depends on size ) to render on JavaHelp viewer EditorPane.. I am using JDK 1.3 / Win 2000 / 256 MB / 1 GHz Pentium. Also found JVM uses 90% of the system resources while loading the pic files. I have noticed it as a JDK 1.3 bug from another thread.
http://forum.java.sun.com/thread.jsp?forum=42&thread=230409
I would like to know is there any other solution for this, keeping my JDK Version as it is?
Thanks
Reji

I would convert your images to JPegs if possible since they are so much smaller in size and therefore load much quicker. I had exactly the same problem but I sorted it out this way. I know it's a pain and it will probably screw up your view, but it will speed up your load time ten-fold and I don't know of any other work around. sorry...

Take long time for loading

Hi Experts,
One of my data target (Data comming from another ODS) is taking long time for loading, basically it takes below 10 times only, but today it is running from last 40 minesu2026
In Status Tab it showing....
Job termination in source system
Diagnosis
The background job for data selection in the source system has been terminated. It is very likely that a short dump has been logged in the source system
Procedure
Read the job log in the source system. Additional information is displayed here.
To access the job log, use the monitor wizard (step-by-step analysis) or the menu path <LS>Environment -> Job Overview -> In Source System
Error correction:
Follow the instructions in the job log messages.
Can anyone please solve my problem.
Thanks in advance
David

Hi Experts,
Thanks for your answers, and my load failed when the data comes from one ODS to another ODS. find the below job log
Job started
Step 001 started (program SBIE0001, variant &0000000007169, user ID RCREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 8ZPP_OP3
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 20006838008                             *
abap/heap_area_total.......... 20006838008                             *
abap/heaplimit................ 83886080                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 5000000                                 *
ztta/roll_extension........... 4294967295                              *
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:31:55, End = 06.09.2010 01:31:55
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 2 in task 0004 (2 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:00, End = 06.09.2010 01:32:00
Asynchronous transmission of info IDoc 4 in task 0005 (2 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 3 in task 0006 (3 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:04, End = 06.09.2010 01:32:04
Asynchronous transmission of info IDoc 5 in task 0007 (3 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 4 in task 0008 (4 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:08, End = 06.09.2010 01:32:08
Asynchronous transmission of info IDoc 6 in task 0009 (4 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 5 in task 0010 (5 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:11, End = 06.09.2010 01:32:11
Asynchronous transmission of info IDoc 7 in task 0011 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Asynchronous send of data package 13 in task 0026 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:01, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:44, End = 06.09.2010 01:32:45
tRFC: Data Package = 8, TID = 0AEB465C00AE4C847CEA0070, Duration = 00:00:17,
tRFC: Start = 06.09.2010 01:32:29, End = 06.09.2010 01:32:46
Asynchronous transmission of info IDoc 15 in task 0027 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 14 in task 0028 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:48, End = 06.09.2010 01:32:48
tRFC: Data Package = 9, TID = 0AEB465C00AE4C847CEF0071, Duration = 00:00:18,
tRFC: Start = 06.09.2010 01:32:33, End = 06.09.2010 01:32:51
Asynchronous transmission of info IDoc 16 in task 0029 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 15 in task 0030 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:52, End = 06.09.2010 01:32:52
Asynchronous transmission of info IDoc 17 in task 0031 (6 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 16 in task 0032 (7 parallel tasks)
tRFC: Data Package = 10, TID = 0AEB465C00684C847CF30070, Duration = 00:00:18,
tRFC: Start = 06.09.2010 01:32:37, End = 06.09.2010 01:32:55
tRFC: Data Package = 11, TID = 0AEB465C02E14C847CF70083, Duration = 00:00:17,
tRFC: Start = 06.09.2010 01:32:42, End = 06.09.2010 01:32:59
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:56, End = 06.09.2010 01:32:56
Asynchronous transmission of info IDoc 18 in task 0033 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 17 in task 0034 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:33:00, End = 06.09.2010 01:33:00
tRFC: Data Package = 12, TID = 0AEB465C00AE4C847CFB0072, Duration = 00:00:16,
tRFC: Start = 06.09.2010 01:32:46, End = 06.09.2010 01:33:02
Asynchronous transmission of info IDoc 19 in task 0035 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 18 in task 0036 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:33:04, End = 06.09.2010 01:33:04
Asynchronous transmission of info IDoc 20 in task 0037 (6 parallel tasks)
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Thanks
Daivd
Edited by: david Rathod on Sep 6, 2010 12:04 PM

Form takes long time to load

My web form takes a long time to load for my users. As a result, I'm not getting very much feedback from them. I need to ensure that the speed at which my form is delivered is consistent. Is Adobe experiencing any problems that would lead to this? I also noticed that the back end was really slow yesterday.

Hi,
>>I also noticed that the back end was really slow yesterday
Yes, we had an issue yesterday with FormsCentral, and it is corrected now. We apologize for any inconvenience that this might have caused.
>>My web form takes a long time to load for my users.
Generally, it should not take long to load the form. Will you try to load the form again?
Thanks,
Lucia

Why the LMS topology Service takes long time to reflect the device availability status?

In the topology services map, the color status of the router takes long time to move from red to green and vice versa.
i have already configured the time interval in the fault monitor poller setting to 6minutes but the only thing reflected the little mark at the top of the icon itself. anyhow the topology service still believe that the devices are unreachable. i have waited almost 45 minutes and nothing happened.
please let me known the trick to make the topology services act more quicker .
Sent from Cisco Technical Support iPhone App

Topology Services isn't really designed to be a near real time network device up/down tool. It will an change icon's status as a result an ANI engine polling cycle or an admin operator-initiated manual device rediscovery. While you can increase the frequency of polling cycles, that's not usually such a good idea as you could make the server be polling constantly and never completing a job.
To ascertain near real time fault status one should refer to the Fault Dashboard.

Finder takes long time to load some folders

When opening some folders, the Finder takes a long time (30-60 seconds) to load all the files in it. Specifically, these folders typically contain 10-50 PHP files, each about 10 kb.
I also notice that sometimes, after the files are listed, their icons are still loading and the "Kind" column is also still loading. (I've got the "Name", "Date Modified", "Size", and "Kind" columns showing; "Calculate all sizes" is enabled" while "Show icon preview" is disabled.)
In addition, when opening a directory such as this and viewing Activity Monitor, I see that coreservicesd is at 70% CPU and Finder is at 30% CPU. After all the files have loaded, both services are still at these CPU levels for about 60 seconds afterward.
Anyone know how I can fix this? I already did "Repair disk permissions" but nothing was found.

For those who don't know, PHP files are just text files. Also, if it helps, I always use List view. If I switch to Column view, Finder is equally slow at listing files.
In addition, I'm using TextMate to open PHP files. It's a pretty bloated and old piece of software these days, so perhaps it's somehow slowing down Finder from loading PHP files, perhaps due to QuickLook rendering or something? Also, one very interesting note: if I "Force quit" Finder to make it reload, the file listing will appear immediately. So clearly something is getting bogged down.

Login Page takes long time to load

Hi,
There is a peculiar issue with one of the portal we have.
If portal is being accessed through the standard url i.e http://<fqdn>:<port>/irj/portal its takes more than 3-4 min everytime to load on the browser. Even once user id & pwd given it takes equally long time to login.
If portal is being accessed through the url i.e http://<fqdn>:<port>/nwa it loads in no time.
Note: Its is standard portal screen. No customization done. This is developement system so hardly couple of users log in simutaneously.
Data base is sqlserver.
Any help on this? Could this be a OS (windows 2003 server) issue?
Regards,
*Raj*

What Arun Jaiswal said, but before you do that, check if it does the same with different browsers!
I had something similar, but when I tested the portal application (in your case it's the standard portal, I know ) in FF3.5 it works, but in IE7 not :S.
Also check this: https://websmp104.sap-ag.de/instguidesNW70
Edited by: J. Ramsaransing on Feb 25, 2010 1:58 PM

Mac OSX thumbs of LR generated JPEGS take long time to load

Hello
I'm running the latest version of Max OSX with LR 2.0 on a Mac Pro tower.
I exported a bunch of JPEGS (Highest quality) using the export feature of LR. I open the folder of JPEGS, and the thumbnails take an unusually long time to generate a thumb preview. It's not end of the world slow, but it goes row by row, updating the thumb icon from a generic icon to the thumb preview.
When I used to batch export JPEGS from PSD files in Photoshop, the resulting JPEGS would never take this long to generate previews if I opened the folder.
I do see that the EXIF into is missing from the LR generated JPEGS, so not sure if that's the culprit. Any ideas? Thanks!

Hello
I'm running the latest version of Max OSX with LR 2.0 on a Mac Pro tower.
I exported a bunch of JPEGS (Highest quality) using the export feature of LR. I open the folder of JPEGS, and the thumbnails take an unusually long time to generate a thumb preview. It's not end of the world slow, but it goes row by row, updating the thumb icon from a generic icon to the thumb preview.
When I used to batch export JPEGS from PSD files in Photoshop, the resulting JPEGS would never take this long to generate previews if I opened the folder.
I do see that the EXIF into is missing from the LR generated JPEGS, so not sure if that's the culprit. Any ideas? Thanks!

It takes long time to invoke the Exception handler code

In our setup there is firewall between the Appserver that is using toplink and the database.The firewall terminates idle connection on any port if the connection is idle for 1 hr.So i have implemented an exception handler to reconnect when the connection is broken.The code works fine but It takes 15 mins for the exception handler code to be invoked.
The database is Oracle and the driver is thin driver,OS is solaris.No external connection pool
I had registered the exceptionhandler to the serversession,should i register it with each ClientSession?

yes ,15 mins is the time taken before the server session's exception handler code is invoked.
The following is the exception handler code on the sever session.Any thing wrong?
server.setExceptionHandler(new ExceptionHandler()
public Object handleException(RuntimeException ex)
{//This method is executed only after 15 min ,if the connection is broken
String mess=ex.getMessage();
System.out.println("In handler excep mess is "+mess);
if ((ex instanceof DatabaseException) && (mess.equals("connection reset by peer.")||(mess.indexOf("IOException :Broken pipe")!=-1)))
DatabaseException dbex = (DatabaseException) ex;
dbex.getAccessor().reestablishConnection (dbex.getSession());
return dbex.getSession().executeQuery(dbex.getQuery());
return null;
What could be wrong ?
I tried Oracle's connection cache Impl created a connection pool using the same thin driver and on the same env.SQLException is thrown immediately on using the broken connection.so I feel the driver is not causing any problem.
Is there any way in toplink to keep the connections active?or Is there any way to poll all connections in the connection pool and check If they are connected instead of waiting until the exception gets thrown and handle it?

PS CS3 taking a long time to load and seems to "spin" when Reading Preferences.

I've noticed this problem a few days ago, and am unsure what I should do about it. PS used to load very quickly, and now when launching, it will spin for a good 90 seconds while reading the preferences. Is there a way to reset the preferences? Is this a sign of something else?
I'm running PS CS3 10.0.1 on OSX v. 10.4.11. Here's a cut & paste of the system info:
Adobe Photoshop Version: 10.0.1
Operating System: Mac OS 10.4.9
System architecture: PowerPC G5 with AltiVec
Physical processor count: 1
Processor speed: 2000 MHz
Built-in memory: 1024 MB
Free memory: 384 MB
Memory available to Photoshop: 979 MB
Memory used by Photoshop: 67 %
Image cache levels: 6
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 148.9G, 58.6G free
Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS3:Plug-Ins:
Additional Plug-ins folder: not set

Not to answer for Buko, but he may be asking what happens if you were a brand new install? In other words when the PS application first creates the preference files.
I have similar issues with PS and Illustrator CS3, more than any time before. Frankly they load a lot of crap. I noticed that this was especially pronounced for CS3 applications.
Denise, my main machine is a G5 Quad Processor running at 2.5 Ghz and I have 16 gigs of RAM. It takes PS and Illustrator about 30 to 40 seconds to load. My point is that we have very similar machines but that I have a bit more muscle and I am getting a comparable time. Imagine if you had my machine you might get the slightly reduced start time. Its not a happy situation but our machines are getting slightly long in the tooth.
A lot of modern apps on the Mac are now using XML files for prefs and they have a habit of getting damaged and corrupted. I would manually locate them in your User directory and remove all of them by hand. Then you should do something that most do not consider.
Optimize your drives with a tool like Tech Tool or Disk Warrior. A fragmented drive severely affects PS operation in 3 ways:
1st: If you watch the PS splash screen as it loads, its loading a long list of pieces, if those are scattered across many disconnected sectors, thats slow.
2nd: If your scratch drive is pooched, that will slow down Photoshop. Don't forget what a scratch really is, its virtual memory, in other words fake RAM. BTW it never a good idea to have Photoshop and/or your OS on the same partition as your documents and scratch drive. If your hard drive is big enough, partition it or spring for another drive, they are cheap.
3rd: If your image/PS documents are on fragmented drives, again slow pokes. PS struggles to pull the sectors together.
Your info above was helpful but I could not tell what how much RAM you have, is it really 1 meg? Thats really small, more RAM will help a lot, then there is less scratch disk usage.
Finally another factor in speed, what is your dives spindle speed and access time? Faster is better.
Much luck.

When using photos from the "Media" option in Applescripts and other apps, it takes a LONG time to load the photos from iPhoto...

It also happens when using the Media option in programs like iMovie. Has anyone found a solution for this problem?

That is long...
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
If it is...
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there.
Regards
TD

Taking long time to load the data

Hi All,
When my BI colleague is trying to load data from a source system, it is taking too long.
And the corresponding job BI_BOOK* is taking around 90000 seconds already.
Can anyone suggest how to tackle this problem?
Thanks so much in advance.
Best Regards, Pradeep

Hi
If your Flat File Source System Takes, time there is no other go than Make the Request Red and Delete the same.Repeat the Upload.
Make sure that your Flat file is closed while upload,
If Infopackage loads data from a flat file on your workstation, then you cannot execute the Infopackage in a Process Chain you need to put your flat file on the Application Server(AL11) and change your Infopackage to load from there instead of the workstation
The file should be closed while scheduling
The file path mentioned in the external data tabpage of the infopackage should be correct
Records in the file should be in uppercase you can use lowercase for a particular characteristic.provided the lowercase checkbox in the general tabpage of the maintenance screen of the infoobject is checked.
Calendar day should be of the format yyyymmdd in the file
Hope ithelps
Edited by: Aduri on Jan 30, 2009 11:19 AM

My Mac Pro takes long time to load mail and start applications

My 13-inch early 2011 Mac Pro runs very slowly, particularly when downloading Apple Mail and when starting applications.
Here is what I get with EtreCheck:
EtreCheck version: 2.0.11 (98)
Report generated November 6, 2014 at 7:44:23 AM CST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.4 (13E28) - Uptime: 4 days 17:41:5
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (340.75 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.cisco.nke.ipsec (2.0.0) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
Startup Items: ℹ️
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Daemons: ℹ️
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.memeo.Memeod.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
macfusionAgent UNKNOWN (missing value)
iTunesHelper UNKNOWNHidden (missing value)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify ApplicationHidden (/Applications/Spotify.app)
Google Drive Application (/Applications/Google Drive.app)
Activity Monitor Application (/Applications/Utilities/Activity Monitor.app)
VidyoDesktop ApplicationHidden (/Applications/Vidyo/Vidyo Desktop/VidyoDesktop.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 67 Check version
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.12 Support
AdobePDFViewer: Version: 10.1.12 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
RealPlayer Plugin: Version: (null) Support
Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 Support
Safari Extensions: ℹ️
Dashlane
3rd Party Preference Panes: ℹ️
Flash Player Support
FUSE for OS X (OSXFUSE) Support
Java Support
TeXDistPrefPane Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
FreeAgent GoFlex Drive [Local]
Total size: 1.00 TB
Total number of backups: 28
Oldest backup: 2012-01-29 05:38:02 +0000
Last backup: 2014-10-05 11:34:28 +0000
Size of backup disk: Excellent
Backup size 1.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      1% loginwindow
      1% PluginProcess
      1% Microsoft PowerPoint
      1% opendirectoryd
Top Processes by Memory: ℹ️
223 MB Mail
69 MB WindowServer
64 MB Memeod
52 MB mds_stores
52 MB systemstats
Virtual Memory Information: ℹ️
26 MB Free RAM
933 MB Active RAM
916 MB Inactive RAM
1.08 GB Wired RAM
10.18 GB Page-ins
526 MB Page-outs

Check out ds store's excellent user tip - Why is my computer slow?
Even a full one minute can be too long, depending on your login items...
Clinton

It takes long time to load the parameter's value when running we run report

Similar Messages

Maybe you are looking for