How to view data in transparent table

How can I view data in transprent tables like HRHAP.
Thanks.

hi,
Write down a sample code to view the same ..
start-of-selection.
select * from hrhap into table it_hrhap.
if sy-subrc = 0.
    loop at it_hrhap.
      write : it_hrhap-plan_version,
              it_hrhap-appraisal_id.
    endloop.
endif.

Similar Messages

How to copy data from transparent table to our own ceated z table?

How to copy data from transparent table to our own ceated z table?
Plz tell me different methods and which one is best?
Is get data from sflight into table z* is correct?

Hi Ajay,
let us consider you have to copy EKKO table to ZEKKO table
1. In ABAP program define internal table based on EKKO
 eg: i_ekko
2. Select the data from EKKO to i_ekko
 eg: select * from ekko into table i_ekko.
3. insert into Z-TABLE from the internal table
 eg: INSERT EKKO FROM TABLE I_EKKO.
 COMMIT WORK.
To insert in internal table you can use the following:
1. INSERT [wa INTO|INITIAL LINE INTO] itab [INDEX idx].
2. INSERT [wa INTO|INITIAL LINE INTO] TABLE itab.
3. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO itab2 [INDEX idx3].
4. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO TABLE itab2.
To inert in database table, use the following:
1. INSERT INTO <dbtabname> [CLIENT SPECIFIED] VALUES wa.
2. INSERT <dbtabname> [CLIENT SPECIFIED] FROM TABLE itab.
3. INSERT <dbtab> [CLIENT SPECIFIED]. oder
4. INSERT <dbtabname> [CLIENT SPECIFIED] ... .
Reward points.. if helpful.
Cheers !
Moqeeth.

How to view data in tables by selecting the synonym from the database objec

I could not figure out how to view data in tables by selecting the synonym from the database objects navigation tree. I had to first choose the synonym, view the details of the synonym to determine the table name, and then select the table from the database objects tree. Is this the only way available?

This functionality currently does not exist. I don't see it on the 1.1 statement of direction either, so perhaps someone from Oracle can give some insight as to when this could be expected.
Eric

How to update the data the transparent table CKMLMV013 ?

How to update the data the transparent table CKMLMV013 ?
can you please replay asap.
thanks,
samba

Hi,
if you do a "where used" search of the table CKMLMV013 you will see that it is updated in several places:
e.g. fm CKML_ORDER_CONNECTION_UPDATE
Have a look at those places where the table is updated.
Best regards.

How to fetch data from cluster tables

hi
i need to know how to fetch data from cluster tables please update me if any
i know that we cannot use joins in cluster table we use view etc
but i need detailed inforation on methods for fetching data from cluster tables
regards
Nishant

Hi,
Check the following links
http://fuller.mit.edu/hr/cluster_tables.html
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '99991231'.
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu <= '99991231'.
Thanks,
Vinay
Thanks,
Vinay

How to select data from a table by passing document number from another tab

How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.S

Hi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
       INTO IT_ADRC
       FOR ALL ENTRIES IN IT_DOC
       WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
     INTO IT_ADRC
     WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal

How to view data in Xcelsius from an external Excel file

Hi Everyone,
i wonder if you know How to view data in Xcelsius from external Excel file and not depend only on the emebded excel sheet.

Hi,
As per my understanding, excel has to be imported in Xcelsius to draw up the dashboard. Your aggregated data sits in the xlf file. Using an external excel file will not be possible (I guess).
One of the ways to connect to an external excel, is the use XML Maps but then your data has to be in the form of XML which will be pulled into excel first and then needs to be brought in Xcelsius using Data Manager.
You can explore XML Maps in xcelsius in SDN.
Regards
Nikhil

Its very urgent:how to insert data into database tables

Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PM

Hi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap

How to refine data in Aggregate tables in Oracle BI

Hello!
How to refine data in aggregates tables (created by "create aggregates ..." statement) after the data in corresponding database tables was updated?
It is unable to use the "delete aggregates" statement and then "create aggregates" again, because "delete aggregates" eliminates all aggregates in a model, but there are several aggregates in our model, that are intended for refining in different time moments and periods.
Thanks

903830 wrote:
Hi folks,
suppose we have table emp01, have 10 records & we create another table emp02 as
create table emp02 as select * from emp01;
now both the table have identical data.
How to find "data" in two tables are identical?Why wouldn't they be identical? You've just created one table as a copy of the other. They are identical in data terms.

How to select data from cluster table

hi experts,
I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
please advice.
mani

Hi Manikandan,
The following code may be helpful to understand how to select the data from cluster table.
Types: Begin of ty_kna1,
Kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_kna1,
begin of ty_bseg,
belnr type bseg-belnr,
kunnr type bseg-kunnr,
end of ty_bseg,
begin of ty_final,
belnr type bseg-belnr,
kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_final.
Data: it_kna1 type table of ty_kna1,
wa_kna1 type ty_kna1,
it_bseg type table of ty_bseg,
wa_bseg type ty_bseg,
it_final type table of ty_final,
wa_final type ty_final.
Select kunnr adrnr from kna1 into table it_kna1 where....
if sy-subrc = 0.
select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
endif.
sort it_kna1 by kunnr.
Loop at it_bseg into wa_bseg.
move wa_bseg-belnr to wa_final-belnr.
read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-kunnr to wa_final-kunnr,
wa_kna1-belnr to wa_final-belnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
Loop at it_final into wa_final.
write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
endloop.
Reward if useful.
Thankyou,
Regards.

How to view data into Infocube

Good Morning everybody.
I would like to know if somebody have any document with informations about RSA1, as for example "How to create a Back Up Infocube?" "How to view data into infocube?"
If you can send me
dacampos at br.ibm.com
Thanks a Lot
Daniel Campos - IBM Brazil.

Hi,
Backup Cube is used for saving the data of Planning Area.
Following steps for creating Backup Infocube
1.First Create Data Source thorugh Planning Area. Double click on PA,then go to Extras where u find option for creating Data Source,then replicate the cretaed Data Source.
2.Go to RSA1,Activate Created Data Source & Create Info Package uder the Data Source.
3.Create Info Cube under Info Area.
4.Create Transformation between Data Source & info Cube.
5.Activate Data Transfer Process(DTP).
For viewing the data into infocube
1.Right Click on selected Info Cube
2.Go to Manage
3.Select request & above info Cube Type(in Selectable data Target for Administration) & go to Contents
4.Select require field from Fld Selection for Output.
5.Come back & Increase no. of hits if require.
6.Execute it. You will find out the data in selected field.
Hope so it will be helpful for you.
Regards
Sujay

How to insert data in database table

Hi experts,
How to insert data into database table using internal table from function module.

Hi,
As per my understanding are you looking for the complete API feature of data insertion into the database using the Locking Mechanism? If yes, then you need to create a Lock Object using the Primary keys of the Primary Table and Secondary Tables. You need to call the lock object first and then you need to make the entry into the table. This principle is based on 'All or None Concept'.
For the insert Statement Key word you can have a look at the following link:
http://help.sap.com/abapdocu/en/ABAPINSERT_SOURCE.htm
Hope this helps.
Thanks,
Samantak.

How to Retrieve data from Variant Table

Can anyone help me by telling how to retrieve data from variant table which was created by user. I am able to see data of variant table only thru cu60 transaction but not se11. I s there any function module to do this?

Hello Mohan,
if u already have data and u want to populate it in F4 help then use below code -
u Have to make use of FM - 'F4IF_INT_TABLE_VALUE_REQUEST'
REPORT ZGILL_VALUE_REQUEST                     .
data: begin of lt_all occurs 0.
        include structure DYNPREAD.
data end of lt_all.
data: begin of lt_selected occurs 0.
       include structure DDSHRETVAL.
data: end of lt_selected.
DATA: BEGIN OF lt_code OCCURS 0,
            code LIKE zgill_main-PERNR,
      END OF lt_code.
data no_dyn like sy-dynnr.
Parameters : ECODE like zgill_main-PERNR.
*parameters: pernr like pa0001-pernr .
no_dyn = sy-dynnr.   "give the scren no directly or sy-dynnr in case of report.
At selection-screen on value-request for ECODE.
select PERNR into table lt_code from zgill_main.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'ECODE'
        dynpprog               = sy-repid
       dynpnr                  = no_dyn
      dynprofield              =       'ECODE'
      window_title           = 'Employee Details'
       value_org              = 'S'
      DISPLAY                = 'F'
   TABLES
        value_tab             = lt_code
       RETURN_TAB             = lt_selected.
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*if sy-subrc eq '0' .
write: 'success'.
*endif.
read   table lt_selected index sy-tabix.
move lt_selected-fieldval to ECODE.

How to view data in transparent table

Similar Messages

Maybe you are looking for