How to select data from a table by passing document number from another tab

How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.S

Hi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
       INTO IT_ADRC
       FOR ALL ENTRIES IN IT_DOC
       WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
     INTO IT_ADRC
     WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal

Similar Messages

Get FI Documet number from BKPF table using CO document number in COVP tabl

Hi,
In datasource 0CO_OM_CCA_9 , we have written a code in CMOD to get the FI Document Number from CO document Number.
The flow of code is:
1) From the CO document number, get reference document number (REFBNfield) from, COVP table
2) Pass this REFBN in AWKEY(10) field of BKPF table.
3) We have created new field in datasource named 'ZBELRE' which gets populated with BELNR field obtained from BKPF table.
This ZBELNR is the FI Document number.
But somehow wrong FI Document number is getting populated.
After analyzing code, we found that the AWKEY which we passed in BKPF table is incomplete and the full AWKEY is
COVP-REFBN+COVP-AWORG
Is this condition always remains true in all the cases? Also, is the selection criterion which we have used to find the FI document number from BKPF table is sufficient?
Our CO Consultant says that we should also pass AWTYP along with AWKEY in BKPF table.
Please suggest a solution.
Following is the code :
***********Datasource Modification for0CO_OM_CCA_9*******************
WHEN '0CO_OM_CCA_9'." Data Source
    TYPES:BEGIN OF ty_bkpf,
    belnr TYPE bkpf-belnr,
    xblnr TYPE bkpf-xblnr,
    bktxt TYPE bkpf-bktxt,
    awkey TYPE bkpf-awkey,
    bukrs TYPE bkpf-bukrs,
    gjahr TYPE bkpf-gjahr,
    END OF ty_bkpf.
    TYPES : BEGIN OF ty_bseg1,
    lifnr TYPE bseg-lifnr,
    belnr TYPE bseg-belnr,
    bukrs TYPE bseg-bukrs,
    gjahr TYPE bseg-gjahr,
    END OF ty_bseg1.
    DATA: it_bkpf TYPE STANDARD TABLE OF ty_bkpf,
    wa_bkpf TYPE ty_bkpf,
    it_bseg1 TYPE STANDARD TABLE OF ty_bseg1,
    wa_bseg1 TYPE ty_bseg1,
    l_s_icctrcsta1 TYPE icctrcsta1.
    "Extract structure for Datasoure 0co_om_cca_9.
    DATA: l_awkey TYPE bkpf-awkey.
    DATA: l_gjahr1 TYPE gjahr.
    DATA: len TYPE i,
    l_cnt TYPE i.
    l_cnt = 10.
    SELECT lifnr
    belnr
    bukrs
    gjahr
    FROM bseg
    INTO TABLE it_bseg1.
    DELETE ADJACENT DUPLICATES FROM it_bseg1 COMPARING belnr gjahr .
    SELECT belnr
    xblnr
    bktxt
    awkey
    bukrs
    gjahr
    FROM bkpf
    INTO TABLE it_bkpf.
    IF sy-subrc EQ 0.
      CLEAR: l_s_icctrcsta1,
      wa_bkpf,
      l_awkey,
      wa_bseg1.
      LOOP AT c_t_data INTO l_s_icctrcsta1.
        MOVE l_s_icctrcsta1-fiscper(4) TO l_gjahr1.
        READ TABLE it_bkpf INTO wa_bkpf WITH KEY awkey(10) =
        l_s_icctrcsta1-refbn
        gjahr = l_gjahr1.
        IF sy-subrc EQ 0.
          MOVE wa_bkpf-belnr TO l_s_icctrcsta1-zzbelnr.
          MOVE wa_bkpf-xblnr TO l_s_icctrcsta1-zzxblnr.
          MOVE wa_bkpf-bktxt TO l_s_icctrcsta1-zzbktxt.
          MODIFY c_t_data FROM l_s_icctrcsta1.
          READ TABLE it_bseg1 INTO wa_bseg1
          WITH KEY
          belnr = wa_bkpf-belnr
          bukrs = wa_bkpf-bukrs
          gjahr = wa_bkpf-gjahr.
          IF sy-subrc EQ 0.
            MOVE wa_bseg1-lifnr TO l_s_icctrcsta1-lifnr.
            MODIFY c_t_data FROM l_s_icctrcsta1.
            CLEAR: l_s_icctrcsta1,
            wa_bseg1,
            l_gjahr1.
          ENDIF.
        ENDIF.
        CLEAR: l_s_icctrcsta1.
      ENDLOOP.
    ENDIF.
***End of Datasource Modification for 0CO_OM_CCA_9*******************

Hi,
this forum is for the SAP BusinessObjects BI Solution Architecture. Please post your question into the corresponding product forum for SPA BW
regards
Ingo Hilgefort

How to select data of sap tables through oracle backend

I need to fetch the data from oracle Backend for SAP tables. I am new to this and don't know how to work in this manner, so can you please tell me step-by-step procedure for the same.
Can you please help me, and can suggest for teh solution.
Rgds, Krishan Raheja.

> However, at my customer site they have some legacy systems which fetch data from SAP tables of the central ECC prod system using dblinks. Of course we have restricted the access to that user giving only select access. But still I think this is a major security concern. But is there any other way of doing it?
Well, the legacy systems you mentioned should use a proper data interface instead of direct data structure (e.g. table) access instead.
Something like RFC-calls for example.
Or a XI-connector.
Or a Web-Service.
Or ... or ... or ...
There are in fact many options.
Just acessing the tables is by far the worst option to go.
At the very least, I'd use views to ensure that only the required data is visible via this dblink and that the access structure (that is, how the views look like) remain the same, even if the SAP application changes in the background.
Even better would be to provide PL/SQL access procedures.
That way the legacy application could use a procedure call and wouldn't have to deal with the SAP table design.
regards,
Lars

How to clone data with in Table with dynamic 'n' number of columns

Hi All,
I've a table with syntax,
create table Temp (id number primary key, name varchar2(10), partner varchar2(10), info varchar2(20));
And with data like
insert itno temp values (sequence.nextval, 'test', 'p1', 'info for p1');
insert into temp values (sequence.nextval, 'test', 'p2', 'info for p2');
And now, i need to clone the data in TEMP table of name 'test' for new name 'test1' and here is my script,
insert into Temp select sequence.nextval id, 'test1' name, partner, info from TEMP where name='test1';
this query executed successfully and able to insert records.
The PROBLEM is,
if some new columns added in TEMP table, need to update this query.
How to clone the data with in the table for *'n' number of columns and*
some columns with dynamic data and remaining columns as source data.
Thanks & Regards
PavanPinnu.
Edited by: pavankumargupta on Apr 30, 2009 10:37 AM

Hi,
Thanks for the quick reply.
My Scenario, is we have a Game Details table. When ever some Game get cloned, we need to add new records in to that Table for the new Game.
As, the id will be primary key, this should populate from a Sequence (in our system, we used this) and Game Name will be new Game Name. And data for other columns should be same as Parent Game.
when ever business needs changes, there will be some addition of new columns in Table.
And with the existing query,
insert into Temp (id, name, partner, info) select sequence.nextval id, 'test1' name, partner, info from TEMP where name='test'_
will successfully add new rows but new added columns will have empty data.
so, is there any way to do this, i mean, some columns with sequence values and other columns with existing values.
One way, we can do is, get ResultSet MetaData (i'm using Java), and parse the columns. prepare a query in required format.
I'm looking for alternative ways in query format in SQL.
Thanks & Regards
PavanPinnu.
Edited by: pavankumargupta on Apr 30, 2009 11:05 AM
Edited by: pavankumargupta on Apr 30, 2009 11:05 AM

How to select data in setup tables based on date

hello gurus,
I have a question . I want to fill the setup tables but not complete historical data. I need to fill it based on some date selection.Can anyone help me the process. I went to oli9bw but i cannot see any option like date range for data selection...... i.e., I need to extract a subset of data from ecc to bw.
Thanks a lot

Hi Sandeep,
While filling Setup tables we won't have any selection(It loads all historical data), when you run the IP to load data to BW.follow the below 2 cases.
1)If you require further delta loads on this, run the full load based on your date selections.then create another IP for delta,run "init without data transfer" as option in Update tab of IP.
2)If you don't require any delta further, simply run Full load with date selections.
Hope this helps.
Regards,
Venkatesh.

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '99991231'.
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu <= '99991231'.
Thanks,
Vinay
Thanks,
Vinay

How to select data from cluster table

hi experts,
I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
please advice.
mani

Hi Manikandan,
The following code may be helpful to understand how to select the data from cluster table.
Types: Begin of ty_kna1,
Kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_kna1,
begin of ty_bseg,
belnr type bseg-belnr,
kunnr type bseg-kunnr,
end of ty_bseg,
begin of ty_final,
belnr type bseg-belnr,
kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_final.
Data: it_kna1 type table of ty_kna1,
wa_kna1 type ty_kna1,
it_bseg type table of ty_bseg,
wa_bseg type ty_bseg,
it_final type table of ty_final,
wa_final type ty_final.
Select kunnr adrnr from kna1 into table it_kna1 where....
if sy-subrc = 0.
select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
endif.
sort it_kna1 by kunnr.
Loop at it_bseg into wa_bseg.
move wa_bseg-belnr to wa_final-belnr.
read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-kunnr to wa_final-kunnr,
wa_kna1-belnr to wa_final-belnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
Loop at it_final into wa_final.
write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
endloop.
Reward if useful.
Thankyou,
Regards.

How to select data from Maintance View in Program

Dear All ,
How to select data from Maintance View V_T052 in abap Program.
Regards,
Archana

TABLES: t179, t179t.
DATA: v_t179_int TYPE TABLE OF v_t179.
SELECT * FROM t179
JOIN t179t ON
t179prodh = t179tprodh
INTO CORRESPONDING FIELDS OF TABLE v_t179_int.
Reward points...

How to select data from structure

how to select data from structure

Hi Laxman,
Structure holds single record of data. You can acess data by using the syntax Structure-field
Please see sample.
data: wa_mara type mara.
select *
 from mara
 into wa_mara
 up to 1 rows.
endselect.
write:/ wa_mara-mandt,
 wa_mara-matnr,
 wa_mara-maktl.
if helps plz reward points.
Regards
Bhupal Reddy

I need to copy data from a table in one database (db1) to another table in

Hi
I need to copy data from a table in one database (db1) to another table in another database (db2).
I am not sure if the table exists in db2,,,if it doesnot it needs to be created as well data also needs to be inserted...
How am I supposed to this using sql statements..?
I shall be happy if it is explained SQL also...
Thanking in advance

How many rows does the table contains? There are manyway you can achieve this.
1. export and import.
2. create a dblink between two databases and use create table as select, if structure doesnot exists in other database, if structure exists, use, insert into table select command.
example:
create a dblink in db2 database for db1 database.
create table table1 as select * from table1@db1 -- when there is no structure present
-- you need to add constraints manually, if any exists.
insert into table1 select * from table1@db1 -- when there is structure present.
If the table contains large volume of data, I would suggest you to use export and import.
Jaffar

Insert into all tables on a Database on Test Server select from all tables on a database A from production server

hi Friends ,i need a suggestion from you on how to
insert data to all tables on a Database "A " on Test server
Select data from all tables on a Database "A" on Production Server
where id=123
Database A is same with Structures on Test and Production also all Tables will have Id column in common.
The purpose of this insert is ,as we all know Production has the latest data and i need to push to test server on request for particular ID only ( may be weekly once or twice a week )
I have a linked server setup name "LINQ"
Example for one table is below , like wise i need a script which does for 154 tables.
Insert into ABC( id, name)---insert to test server
Select Id, name from LINQ.ProdSerevrname.databasename.ABC where id = 123
Please help me ..
Thanks

Why not use export import wizard for this if you've read access to production?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to refine data in Aggregate tables in Oracle BI

Hello!
How to refine data in aggregates tables (created by "create aggregates ..." statement) after the data in corresponding database tables was updated?
It is unable to use the "delete aggregates" statement and then "create aggregates" again, because "delete aggregates" eliminates all aggregates in a model, but there are several aggregates in our model, that are intended for refining in different time moments and periods.
Thanks

903830 wrote:
Hi folks,
suppose we have table emp01, have 10 records & we create another table emp02 as
create table emp02 as select * from emp01;
now both the table have identical data.
How to find "data" in two tables are identical?Why wouldn't they be identical? You've just created one table as a copy of the other. They are identical in data terms.

How to insert data into two tables linke with foreign key..

I have two tables
1)EMP(emp_ID,username,emp_type_code)
emp_ID is primary key, emp_type_code is a foreign key references emptype table.
2)emptype(emp_type_code,emp_type_descripton)
emp_type_code is primary key
Could anyone help me ..how to insert data into EMP table. How to insert data into two tables linke with foreign key..

CREATE TABLE "CATDB"."DWDIMUSER"
"USER_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_ID" NUMBER(10,0),
"FULLNAME" VARCHAR2(20 BYTE),
"FNAME" VARCHAR2(20 BYTE),
"LNAME" VARCHAR2(20 BYTE),
"USER_SUBTYPE" VARCHAR2(20 BYTE),
CONSTRAINT "DIMUSER_PK" PRIMARY KEY ("USER_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE,
CONSTRAINT "DIMUSER_DIMSPECIALTY_FK" FOREIGN KEY ("SPECIALTY_ID") REFERENCES "CATDB"."DWDIMSPECIALTY" ("SPECIALTY_ID") DISABLE
CREATE TABLE "CATDB"."DIMSPECIALTY"
"SPECIALTY_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_NAME" VARCHAR2(100 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("SPECIALTY_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
INSERT INTO DIMUSER (FullName, FNAME, LNAME, USER_TYPE, USER_SUBTYPE)
SELECT DISTINCT
Engineer AS FullName,
regexp_substr(Engineer , '[^,| ]+', 1, 1) as FName,
regexp_substr(Engineer , '[^,| ]+', 1, 2) as LName ,
'Engineer'
FROM EMPLOYEELOOKUP;
INSERT INTO DIMSPECIALTY (SPECIALTY_NAME)
SELECT DISTINCT SPECIALITY
FROM EMPLOYEELOOKUP;
COMMIT;
CREATE TABLE employeelookup ...IS A TABLE THAT HAS ALL THE DATA NEDED TO BE FILLED IN BOTHE TABLES...
CREATE TABLE "CATDB"."EMPLOYEELOOKUP"
"EMPLOYEELOOKUP_ID" NUMBER(10,0) NOT NULL ENABLE,
"ENGINEER" VARCHAR2(25 BYTE),
"SPECIALTY" VARCHAR2(20 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("EMPLOYEELOOKUP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
DATA IN EMPLOYEELOOKUP
Engineer, Specialty,
John, Dow, Electronis,
Dow, Jons, Technician
Stan Smithers Sales
Mark, Richards Marketing
Jenny, Lane Marketing
John, Lee Sales
I NEED TO LOAD THE FOREIGN KEY IN DIMUSER FROM THE DIMSPECIALTY TABLE?
BY USING THE LOOKUP TABLE TO MARCH THE NAMES UNDER THE Engineer COLUMN, SPECIALTY COLUMNE DISTICTIVLY BY JOINING THE DIMSPECILTY TO RISTIVE THE PRIMARY KEY AND FILL IT IN THE DIMUSER TABLE AS A FOREIGNE KEY.

How to insert data in database table

Hi experts,
How to insert data into database table using internal table from function module.

Hi,
As per my understanding are you looking for the complete API feature of data insertion into the database using the Locking Mechanism? If yes, then you need to create a Lock Object using the Primary keys of the Primary Table and Secondary Tables. You need to call the lock object first and then you need to make the entry into the table. This principle is based on 'All or None Concept'.
For the insert Statement Key word you can have a look at the following link:
http://help.sap.com/abapdocu/en/ABAPINSERT_SOURCE.htm
Hope this helps.
Thanks,
Samantak.

Send data to ECC table through RFC Call function from SAP B1 via b1if

Hi,
I have created scenario in B1if which triggers from SAP B1, now I have to send this data in to ECC table, so I have created scenario for that with inbound SAP B1, outbound void and in process RFC Call atom is there but I am not getting data in receiver and also how to write xml to send data in RFC function. Function for RFC has configured from ECC end and have access of that function.
So please help me to send data to ECC table through RFC Call function from SAP B1 (9.0) via b1if
Thanks

Solved by my own.

How to select data from a table by passing document number from another tab

Similar Messages

Maybe you are looking for