How to view data of a structure.

Dear all
I am a end user. I have access of tcode se16 which allow us to view data from table. But information like long text in PR is stored in a structre. How we can view data stored in a structure.
for ex Long text data of PR is stored in a structure RM06B.
How can we view this using standard trasactions.
Regards
Rahul

Rahul,
Structures do not contain data on their own. They are populated by a program. In your case, there are about a dozen standard SAP programs that use this structure. The structure is populated, temporarily, only when you run one of these programs.
The data may originate from anything from within the program: fields in a table, from calculations, from other data objects. There is no data viewer for a structure.
Long Text in SAP is usually (but not always) stored in a couple of generic text tables. Usually PR long text is stored in STXH and STXL. Before you get your hopes up, you should be aware that the long text data is encoded, and it cannot be viewed directly in a table viewer such as SE16. If it is inadequate for you to use ME53 to read the text in a Purchase req, then you should contact an ABAPer, who can write a custom program to view selected texts that are stored in STXH/STXL.
Best Regards,
DB49

Similar Messages

How to view data in Xcelsius from an external Excel file

Hi Everyone,
i wonder if you know How to view data in Xcelsius from external Excel file and not depend only on the emebded excel sheet.

Hi,
As per my understanding, excel has to be imported in Xcelsius to draw up the dashboard. Your aggregated data sits in the xlf file. Using an external excel file will not be possible (I guess).
One of the ways to connect to an external excel, is the use XML Maps but then your data has to be in the form of XML which will be pulled into excel first and then needs to be brought in Xcelsius using Data Manager.
You can explore XML Maps in xcelsius in SDN.
Regards
Nikhil

How to view data in tables by selecting the synonym from the database objec

I could not figure out how to view data in tables by selecting the synonym from the database objects navigation tree. I had to first choose the synonym, view the details of the synonym to determine the table name, and then select the table from the database objects tree. Is this the only way available?

This functionality currently does not exist. I don't see it on the 1.1 statement of direction either, so perhaps someone from Oracle can give some insight as to when this could be expected.
Eric

How to view data into Infocube

Good Morning everybody.
I would like to know if somebody have any document with informations about RSA1, as for example "How to create a Back Up Infocube?" "How to view data into infocube?"
If you can send me
dacampos at br.ibm.com
Thanks a Lot
Daniel Campos - IBM Brazil.

Hi,
Backup Cube is used for saving the data of Planning Area.
Following steps for creating Backup Infocube
1.First Create Data Source thorugh Planning Area. Double click on PA,then go to Extras where u find option for creating Data Source,then replicate the cretaed Data Source.
2.Go to RSA1,Activate Created Data Source & Create Info Package uder the Data Source.
3.Create Info Cube under Info Area.
4.Create Transformation between Data Source & info Cube.
5.Activate Data Transfer Process(DTP).
For viewing the data into infocube
1.Right Click on selected Info Cube
2.Go to Manage
3.Select request & above info Cube Type(in Selectable data Target for Administration) & go to Contents
4.Select require field from Fld Selection for Output.
5.Come back & Increase no. of hits if require.
6.Execute it. You will find out the data in selected field.
Hope so it will be helpful for you.
Regards
Sujay

How to delete data in LIS Structure S855

HI All :
I am new to this portal. I would like to know how
to delete data in LIS Structure S855. Actually, this table contains errorneous data and like to clear it up and run stats setup to refill it up.
Though we have T-Code:lbwg to delete setup tables for LO.
Likewise do we have any transaction to delete LIS table.
If not, how to delete the same.
Thanx & Regards:
Rafi

hi roberto,
this is nataraj.i am really a novice.i have gone through this discussion.since lis s855.its kind of table.can we delete like a table using debugging?hope u have got me.correct me if am wrong.
i will be waiting for your feedback.
regards,
nataraj.

How to extract data from a structure?(Data Dictionary)

Hi all,
       This is regarding extracting data from a structure.
For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
Thanking you,
anjaly

HI Anjaly,
as you said structure does not have any value .. unless something is added to it..
So just use the structure to define the type of the sttructure you want..
Or to include it in your itab like..
data : Begin of itab occurs 0.
       include structure ADDR1_DATA.
data i type i.
       end of itab.
you cannot directly extract data from the structure ADDR1_DATA..
regards
satesh

How to view data in legacy ?

Hello,
how can i view data from legacy, prior year in my case, that has been migrated to ECC ?
Thanks and i will assign points

Hi,
The LSMW tool has a fixed secuence of migration steps which actually are easily understandable. When you have decided in the first step the migration object (Customer Master /Vendor master / material master, etc.) and selected the adequate migration strategy (standard batch Input /Direct input, Idoc, BAPI or the easiest way: by recording), THEN in the next steps you define migration structure and fields acording to your migration file and/or requirements. THEN apply The MAPPING , READ Your file, display the data you read, apply the conversion rules of your mapping and watch the results of applying your convertion rules and at the last step execute the BI, DI or BAPI or recording.
You could in the ABAPP rule of the mapping write a select statement. But it is not the idea because its worses the performance.
You do not fill directly tables or view unless you use the direct input. Shoose the right migration program (BI, DI, BAPI, IDOC) in the first step for your MIgration object.
Hope this helps. <b>
If so, please allocate points!!!</b>
Thomas

How to view data in SNC after getting transferred from ERP

Hi all
I have transferred material ,vendor, customer ,scheduling agreement ,demand from ERP to SNC system.
Now I want to view this demand in SNC. What I have done is in SNC is I opened supplier view.
In supplier view, I opened SMI monitor. Now when I click on F4 help of product I am not able to view the material
which I had transferred. Same is the case with location.
I know that in SNC, in order to view data following assignment is required.
Material  Location  Business Partner ( Org ) --- > BP ( Person )  User.
Now I have assigned Material to location .
Location to BP ( Org ).
BP ( org ) to BP ( Person ).
BP ( Person ) to user.
But still I am not able to view the data in F4 help ( For SMI overview screen ).
Next I learnt about Selection modes in SNC.I think I need to assign selection mode u201CPDNF_NEWu201D
To application ID of SMI overview screen in order to view Product and location in F4 help.
If I am correct than please let me know how should I proceed. Else please let me know
What all configuration is required to view product and material data in F4 help and eventually the demand which I
Had transferred from ERP.
Best Regards
Rahul

Hi Vasu/ hi Nikhil,
I have done what you mentioned but still could not see the data in SNC Web UI.
Let me explain once again.
Consider a case when Panasonic ( Supplier ) is managing inventory for Walmart ( Customer ).[ VMI scenario ]
Now
Step 1 : Walmart will create Material,Location,SA ,demand in his ERP.
Step2 : Master data with demand will get transferred to from customers ERP system to SNC system.
I can see Product and location by SNC -- > Master data -- > Product/Location.
Till this point everything is fine.
Next I have done following.
Assign my user to Business Partner of type org ( Customer ).
Location is assigned to Business partner.( Customer ) as material will be shiped to customer location.
Location is assigned to model 000
Material is assigned to Location and Planning version 000.
Now logically assignement is as follows.
User -- > BP --> Location --> Material.
Now when I go to customer view ,in product and location,I should be able to see my product and Location.
But I am not able to see.
Could you help where I am going wrong.
Regards
Rahul

Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...

A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/

HOW TO VIEW DATA IN LOG VIEW - PROCESS CHAIN?

HAI FRIENDS,
I SIMULTANEOUSLY LOADED DATA INTO ODS AND INFOCUBE....I USED THE PROCESS CHAIN TO LOAD DATA.. BUT AFTER ACTIVATING, I COULD N'T VIEW THE DATA IN THE LOG.AFTER THAT I FOUND OUT DATA IS NOT LOADED INTO THE ODS ..SO I ACTIVATED IT AGAIN.. DID THE PROCESS CHAIN ACTIVATE.. EVEN AFTER THAT I COULD NOT VIEW DATA IN LOG VIEW AND ALSO WHEN I CLICK ON LOAD DATA PROCESS(ODS) NO DATA IS FOUND.. PLS HELP OUT
WITH REGARDS
APPU

Hi,
Go to the manage screen for that ODS. See teh relevent request and find how many records were transferred and how many added.
If it is zero added records, then check for any rules.
Arun
Assign pts if useful

How to view Date and Time in messages app?

How do I display the date & time of every individual message, in "Messages" app [Version 8.0 (4226)] for OS X (10.9.4)
It seems to sort messages sent within a few minutes of each other as conversations, and only inserts a timestamp every 5 or 6 messages....I need to see the date & time of each one.
I know you can do this on the iPhone by pulling the screen to the left, so the data is there..., but I cannot figure out how to view it on my iMac.
Thanks!

Hi,
Mouse over the text or Pic that was sent.
That little boxed time stamp will appear (It may be a yellow box in a Mavericks boot)
9:13 pm Saturday; August 9, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to view "date from" and "date to"

Hi,
I have loaded EMP data. In the mapping "date from" and "date to" are visible. But these fields are not seen when I display the EMP data.Can someone please tell me how to view these fields?
Thanks,
Williams

I got your question . Please find my understandings .
In the transformation Please check weather routine or formula is written which is stopping the dats
to be updated to the target .
I mean data is there in the source but if its not updating to target it seems some rules have been set up in the transformation . Please check .
Assign marks is the best way to appreciate help

How to get data from INVFO structure

Hi Guys,
Can anybody tell me How to get the Data from INVFO structure for field WRBTR and i am also down loading from BSEG WRBTR field. so i have to display these 2 fileds in the Final Ouput of ALV grid. so can anybody tell me how to download INVFO-WRBTR value?
Thanks,
Gopi.

Hi Gopi,
INVFO is a structure of BSEG and other tables.
You can get the WRBTR from BSEG table not from INVFO structure.
Regards,
Atish

How to view data usage on Centro

Hello, I have a new Palm Centro on AT&T. I need to view how much total data I have used, but I cannot for the life of me find a usage counter in the Palm OS. Is there a counter, or any way to view this information?
Thanks.
Post relates to: Centro (AT&T)

There is a link to access "My Minutes" from the shortcuts screen for an AT&T Centro, but you're right - no link for Data usage.
I've always been able to view this from AT&T's webpage for my account though - you may be able to view it using Blazer and logging into your account.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to view data in HR data sources?

Hi all of you,
I am learning to extract data from HR module into BW on IDES system. I want to see if there is data in the 0HR_PY_1 data source. I went to RSA3 and gave the data source as 0HR_PY_1. What do I give in the fields BIWMONTH and PERNR. In what format do I enter the date in BIWMONTH and PERNR. Please advise.
Thank you.
TR.

Hi Suresh,
Thank you for the reply. But what do I enter in the field BIWMONTH.
I tried entering
BIWMONTH (From) 000006 (TO) 000012
PERNR (From) 00000010 (To) 00000120
But I am getting the message 0 data records selected.
Please advise how to view the data.
What tables should I use to see the data in SE11?
Please help.
Thank you.
TR.

How to view data of a structure.

Similar Messages

Maybe you are looking for