How to view java stack "systemINFO" in R3 GUI?
Usually we go http://host:port/index.html , select "system information", then see the java components applied to the java stack.
Can the same system info be found in some DB table so that we can view them via se16? Or are there any transactions show the same system info?
I ask this question is because sometimes I do not have the administrator ID or sometimes the java stack has trouble to be up.
Thanks for your help.
Dear Sunny
You should be able to see them in your Solution Manager SAP system in transaction SMSY.
or
You can connect to the Java database schema using a third party tool (database viewer) to view the tables. You can easily find freeware software.
However you do need the connection string and user/pass of the target database to be able to connect.
Kind regards
Tom
Similar Messages
-
How to install java stack ,only abap ,basis patch level 9 installed
how to install java stack ,already installed abap ,basis patch level 9,please any one guide me and please give me installation steps for java stack.
Hi,
From sapinst, install Java Add-on.
check installation guide.
Thanks
Sunny -
How ABAP and JAVA stacks are connecting
Hi Experts,
I have a doubt in pi. We are developing Message Mapping in IR, it means it is running on JAVA STACK. But we are checking any mapping error in SXMB_MONI which will run on ABAP STACK.
Now My doubt is " How JAVA and ABAP stacks are connecting to each other and How we are able to see Mapping error in Integration Engine which resides on ABAP stack even though we create Mapping in IR which runs on Java".
Thanks&Regards ,
Gajapathi.Hi Gajapathi,
How JAVA and ABAP stacks are connecting to each other
PI manages using single database for both JAVA and ABAP servers. But both access them using different schema. They connect using RFC protocol via SAP Java Connector (JCo Connector).
How we are able to see Mapping error in Integration Engine
which resides on ABAP stack even though we create Mapping in IR which runs on Java".
So when you create a object be it mapping or interface or any XI objects, it is stored in Single Database. When you use ABAP sxmb_moni for monitoring the message, it uses ABAP related schema to access the message.
I hope it answers you query.
Regards
Ramesh -
Hi,
is it possible to remove a java-stack from a central instance? For example a CRM installation, having both abap and java stack?
The java-stack is not used.
Toine.Hello Toine,
Yes, it is possible to remove the java stack. You can find the information how to do it in the WAS installation guide of your release, under a section "Deletion of an SAP System Installation (J2EE)"
Kind regards,
Marcelo -
How to install java stack pathes
hi friends
i have installed EP and DI in a box and sp level is sp09. now i want to apply upto sp13. i got sp 11 java stack with the softwaer its in dvd and its having lable.asc file . i would like to know how apply it .
my question is
1 . how to install the java stack sp 11 dvd which contains (lable .asc).
2 . do i need to fallow the sequence to apply the stacks. like (sp 10,11.12,13) only java stack
3. what is the processor to apply stacks .
4 . can i install the stacks when the system is down.
its urgent
regards
rajaHi,
You can apply stacks when server is running. Make sure server is up and running. You can then start installing the stack 13 directly. (No need for 10, 11,12 etc).
Regards,
Harini S -
Hello.
How can i restore Java stack from 11 levele to level 4 ?
regards,
DenisHi,
As for as I know, you cannot downgrade from higher SP to lower SP through any means like JSPM or SDM or any tool.
It you want to move back to SP4 ,then only solution I know is to install a new server with SP4 afresh.
Hope that helps -
Source release: an R/3 4.7 32bit
Target release: ECC6.0 64bit (abap+java)
My plan is to go over the following upgrade steps:
4.7 32bit-> ECC abap only 32bit ->ECC abap 64bit -> install java stack.
Is this the best way?
Thanks a lot!Hi,
Its always best to go to the enhanced and latest version.
_+4.7 32bit-> ECC abap only 32bit ->ECC abap 64bit -> install java stack.+_
the above step will increase only only the cost.
If ur going for just practice purpose, then no issues u can go for it.
But its always good to go for
4.7------> Ecc(ABAP + JAVA) together.
coming to 32bit and 64 bit. Some constraints are there. If u look at Ecc 6- SR3, it will only support 64 bit.
Look at all those sections and go for upgrade.
Regards,
Ravi -
Access to the JAVA Stack of PI system
Hi,
User want access to JAVA Stack in PI System.
Below is the message while user try to logon to Integration Builder in SAP NetWeaver for the PI Portal:
"No authorization for this action".
Kindly let us know how access to JAVA stack is possible?
Thanks and Regards,
Sachin.Hi,
At present i would like to go for Alert configuration as Raja sekhar suggested. I reffered number of blogs contains how to get alert mail (through Alrtcatdef and scot ) but i need how to get Alert as SMS. where can i specify the mobile numbers and how to do it. Please do the needful.
Regards,
srihari. -
Uninstall Java stack for Live Auction Cockpit
Hi,
I need to uninstall java stack for Live Auction Cockpit. Can anybody explain how to uninstall Java stack/MS SQL server.
Thanks,
-RavHi
<b>Please go through this -></b>
<u>Se related OSS Notes-></u>
Note 639998 Live Auction Installation Additional Information
Note 715985 Live Auction 2.0 Install/Upgrade Additional Information
Note 1008524 last minute installation, upgrade and patch info for LAC 6.0
Do let me know.
Regards
- Atul -
How to connect separated ABAP and Java stacks ?
Hi,
I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
As per my understanding, only JCO RFC is the mean of communication between ABAP and Java stacks.
But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
J2EE stack's status from smicm (ABAP).
Would you please suggest me, if there is any more configuration to be done on abap or Java stack side.
Thanks,
Cheers !!!
AshishHi Sunny,
JCO RFC is tested and it is working fine. So no issues from JCO RFC side. Hope you would have read carefully.
>
Ashish Mishra wrote:
> But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
> J2EE stack's status from smicm (ABAP).
>
========================================================
Hi Anil ,
Thanks for your reply. but
>
Ashish Mishra wrote:
>
> I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
>
Hope I am able to clear your doubt. Java is completely separated stack and not add-on.
Suggest me how can I proceed further on this connectivity.
=========================================================
Hi Olivier,
I am grateful to you for your reply. I understood your point but now except a successful JCO RFC test,
is there any mean to check and ensure that both the stacks are connected properly and ready to use.
Regards,
Ashish -
How to configure SSO for WAS Java stack
Hi all,
I want to configure our WAS server with java stack as a SAP ticket issuing system. This system does not have Portal installed on it.
I want to know weather it is possible or not. if possible how it can be done.
actually ABAP stack their are transaction like SSO2,SSO to do the task. but what about WAS with Java stack?
Thank all.HI Kumar
Follow this link.
http://help.sap.com/saphelp_nw04/helpdata/en/53/695b3ebd564644e10000000a114084/frameset.htm
Hope this helped you
Reagrds,
RK -
How to enable ping service on java-stack only system
I have installed SAP NetWeaver 7.0 - Java Trial on local host.
How can you activate the ping service there?
It should work under "http://localhost:50000/sap/bc/ping"
(I know how to activate it with transaction SICF in an abap system, but I have java-stack only here, so I can't call transactions. I can only use the Visual Admin, right?, but there I could not detect a ping service so far)
More detailed:
I created system "SAP_WebDynpro_XSS". (this is necessary for connecting to ECC abap backend for ESS Packages) and set following parameter:
template:"SAP system using connection string"
category: Web Application Server
Web AS host name: chrisSAP:50000
Web AS path: /webdynpro/dispatcher/
Web AS protocol: http
But when I test the "SAP Web AS Connection" for this system, I got following error:
7. The Web AS ping service http://chrisSAP:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
8. An HTTP/S connection to http://chrisSAP:50000/webdynpro/dispatcher/ was not
obtained successfully; this might be due to a closed port on the Firewall.
I guess step 8 did not pass because step 7 failed, and not because of a closed port or firewall (I made sure everything is open.)
The strange thing is that the connection test fails, but the connection seems to work fine!
I mean I can see the front ESS page in the portal when logging in with an ESS-user, and there are no errors in the log. If I change the SAP_WebDynpro_XSS parameters to some other made-up values, then the front ESS page does not come up and some errors appear with "SAP_WebDynpro_XSS" inside.
That proofs that the connection is working despite the failed connection test, right?. But what can I do that the connection test passes? It seems that somehow SAP has hardcoded the path "/sap/bc/ping" which usually exists on an abap system. But I have java-stack only, so how can I tell that the function that runs the test?
A system connection test fails, but the connection is working fine!
If someone could explain that to me...Dear Srini Nookala,
thank you for your answer. Unfortunately I don't understand the relation of my question to your answer.
>> check with OSS note 1019335 SAP NetWeaver AS Java 6.40 SP21
I have Version 7.0 SP14. I read the OSS note, but there are around 100 changes listed. I read them all, but couldn't figure out one that has to do with ping and system test. So which sentence inside the note are you referring to?
>> The problem is due to JCo parameters configuration not properly, Ask Basis team, they will do it.
I am basis team. I configured the JCo properly as described in manual and tested them afterwards. They run successful. Also all the links that you gave refer to JCO connections about how to set them up and test them. But what have JCO connections to do with System-connection tests? As far as I know JCO-connections are not used for system connectivity tests. You can set them up independent. I understand that JCO-connections are used for getting data from backend servers. But the system "SAP_WebDynpro_XSS" is defined for determing the webdynpros on localhost (frontend, not backend).
So please can you explain me what JCO-connections which refer to remote hosts have to do with a ping service on local host that cannot be reached? And which part would be not configured "properly"? Timeouts? user?
To define my question more properly:
Is it possible to make the connection test work on a java-stack only host for a system that refers to itself (localhost)? Or is it a known bug?
Some sub-questions
Am I using the right system template (I am using "SAP system using dedicated application server")
I have no abap on local host (chrisSAP). Only java stack. Usually path ..sap/bc/ping refers to an abap system, right? So in my opinion I have 3 possibilities:
- install abap-stack on local host (portal) and activate ping service.
- somehow install a ping service that runs under the given URL in Visual Admin (how?)
- somehow tell the connection test to skip pinging and continue test. (How?)
Any additional advice would be highly appreciated. -
How to view pdf file in java/jsp?
Hello Everybody,
Any one help me how to view pdf file in jsp using java application.
I have pdf file c:\app.pdf.
How can i display the pdf file.
Please help me.................
ThanksHello,
You can use the below code, but i am not sure how far is this a startard way of doing it.
# <%
# ServletOutputStream servletOutputStream = response.getOutputStream();
# File reportFile = new File("C:\\Tomcat 5.0\\webapps\\TestApp\\myfile.pdf");
# FileInputStream fis = new FileInputStream(reportFile);
# byte[] bytes= new byte[128000];
# int count=fis.read(bytes);
# try
# response.setContentType("application/pdf");
# response.setContentLength(bytes.length);
# servletOutputStream.write(bytes, 0, bytes.length);
# servletOutputStream.flush();
# servletOutputStream.close();
# }catch(Exception e){} -
How to create Roles in UME (ABAP+JAVA stack)
Hi,
I have created roles earlier on JAVA stack alone. However, this time I am working on JAVA+ABAP stack. When I am trying to create role in UME, I am getting only two tabs:
General Information
Assigned Groups
I am not getting Assinged Actions tab here.How do I assing actions ?
Can any one please help me in creating roles in ABAP+JAVA stack.
That would be a great help!
Regards
FaisalHI Faisal,
When ABAP is the UME, you can only edit users / groups that are J2EE only. Any group that is defined in ABAP is read-only for the Java Server to prevent conflicts (there is no synchronization) and has to be changed in ABAP.
Please take a look at this link, which has a great graphic describing this.
http://help.sap.com/saphelp_nw04s/helpdata/en/7c/36dcd59865b246b993c471199ba37a/content.htm
So, if the Java group was created in ABAP, the ABAP user has to have the ABAP role assigned to him, so that he is in the group on the Java server. make sense? The graphic in the link above really explains it well I think.
If you a new / custom Java group (not in ABAP) then you should be able to assign users to it from the Java server. -
How to create multiple files with Receiver File Adapter in SAP PI 7.31 Java Stack
Dear Friends,
I am using Sender JDBC Adapter and Receiver File Adapter in Integration Flow in SAP PI 7.3 EHP 1 SP08 Java Stack environment. The requirement is that we need to create multiple files based on the row count in jdbc resultset. If there are 5 rows in resultset, we need to create 5 XML files with one row elements in one file. Similarly if there are 10 rows, we need to create 10 XML files.
So how can we create multiple files in this scenario. I tried placing a for loop in the Java Mapping as below in the transform method:
DynamicConfiguration conf = arg0.getDynamicConfiguration();
StringBuffer sbFileData = new StringBuffer();
for (int i =0; i < record.size(); i++ {
. // Create XML for each row and Marshal the object into to the String Buffer
String strFileName = "DC_" + new SimpleDateFormat("ddMMyyyyHHmm").format(new java.util.Date())+"_"+i+".xml";
conf.put(KEY_FILENAME, strFileName);
arg1.getOutputPayload().getOutputStream().write(sbFileData.toString().getBytes("UTF-8"));
arg1.getOutputPayload().getOutputStream().flush();
So here I'm flushing the OutputStream for each record. But it's not creating the multiple file, instead it creates only one file will all record XMLs appended to each other.
Please let me know if I missing something or need to do some thing else.
Regards,
Shreyansh ShahHi
You can easily achieve this using graphical mapping. Create your target message type like below
MT_Target
Details 0 to 1
Data 0 to 1
Source sample structure
<resultset>
<row>
<column-name>column-value</ column-name>
</row>
Then do the message mapping like below
map <row> with MT_Target
contant ----> Deatils
column-name ------>Data
In the signature tab of message mapping, choose the occurrence of your target message type as
0 to unbounded.
This will generate multiple files from multiple rows.
Let me know if you have any doubt.
Maybe you are looking for
-
How to call sshr page in custom oaf page
hey everyone, i would like to access the leave of absence page by creating a link on the custom oaf page. So that whenever i click on this link it will open the below page. Below is the function details for the jsp page that i want the link to open i
-
Ive been unable to install IOS 8 SDK since it came out because of this error. "There was an error in the App Store. Please try again later. (20)" 1. Have tried installing other free and paid apps through the store and no issue there. Updates working
-
Does Smartview 11.1.1.3 work on Windows 7?
does Smartview 11.1.1.3 work on Windows 7? I think it is officially not supported. Anyone with luck using SV on windows 7 and office 2010? Office 2010 is very similar to Office 2007 (which is supported, I thijnk, by SV 11.1.1.3)
-
SQL LOADER and ORA-01861: literal does not match format string
Hi, I've to load data through control_file(.ctl) into oracle table through sqlldr. Oracle 11g, win xp. as soon as I use - sqlldr dss/dss control=orders.ctl I get error or nothing. Text file that is generated after loading fails has the following erro
-
Shipping(Intra City and Inter City)
Hi, I have a problem ,does SAP Transportation covers both Inter and Intra City Route Planning. Kindly reply me as soon as possible. Reward points if helpful