How to we success to change effect of color differences(r-y,g-y,b-y) by using lab wiew

we have a problem about changing effect of color differences using lab wiew.
what sould we do

Hello,
I would like to hear a little more information about your application. What are you trying to do with color? Are you matching colors, doing color location, or color pattern matching?
Please let me know.
Thanks,
Morten Jensen
National Instruments

Similar Messages

  • How do I delete or change my number in my old iPhone, so that I can still use it for iMessages without issue?

    I have an iPhone 4S that was with Verizon. About a week ago I ported into Virgin Mobile and bought a new phone to use until the next iPhone comes out. I now still have my old iPhone, which I want to use for iMessages, as well as like an iPod, etc.
    The issue I am seeing is that my phone number is still registered to my iPhone and I haven't yet figured out how to delete it or change it. The problem this is causing is it is making my iPhone sometimes intercept messages from those with iMessage who are texting my phone number. The messages should be going to my new phone, not my iPhone, since they are texting my phone number (not my iMessage email) and my iPhone has no service connected to it.
    Here's an example of what I'm trying to say: the other day I texted a guy selling an item online. I used my new phone to text him, not my iPhone. He texted me right back, but the text went to my iPhone, not my new phone. We then texted each other via iMessage and no texts were making it to my new phone.
    I think this is also causing some messages to not go through on my new phone either, where I'm just simply not getting texts from people sending me messages. My iPhone isn't getting the messages, nor is my new phone.
    What I need to do is delete my number or put a random number in my phone so that I don't keep missing or losing texts. I saw the ways recommended to disconnect your number from iMessage, but that then kills my ability to use iMessage on my iPhone. There must be a way that the number in my iPhone can be changed or deleted. We are in 2013 I think, and this was something I always had the option of changing via manual programming on every phone I've had since 1902 or so.
    How to do this?!

    I also already deleted my phone number from iMessage on my MBP.

  • How can I programica​lly change the background color of one VI using another VI?

    Is it possible to change the text background color of an indicator on the front panel of one VI from a different VI? 
    Solved!
    Go to Solution.

    Hi Coutts,
    Good Morning and I hope your well today.
    Thanks for the kudos and marked answer.
    You can alter the controls/indicators fonts etc.
    You need to get a reference to Controls[] which includes all controls and indicators on a VI. 
    Then I have created an array of their Labels.Text - so we know which reference is which.
    With a single reference you can then access properties such as label.font where you can alter if the label is
    Bold, Unerline,size and colour...
    Notice I have selected to Bold and Underline the label of the controls and indicators - and they appear bold and underlined. 
    I have re-attached the modified code.
    Hope it finds you well, 
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!
    Attachments:
    setter.vi ‏22 KB
    other VI.vi ‏5 KB

  • Picture changing effect!?

    Hi there,
    Does anyone know how to make this picture changing effect on a mac?
    http://www.aegistraining.co.uk/
    Desperate to put it on my website, but not sure how to do it! Not even sure what to call it ! Almost like a slideshow i guess!
    Would be very grateful for advice, Thank you!

    That's "flash".
    Depending on how much of it you may need to do you might take a look
    at "http://www.verticalmoon.com/"
    They have a "slide" program that might work for you.
    I will create an "swf" file that actually has better compatibility than QT if one's not using an Iphone or Ipad.
    I imagine there are others, but I have theirs and it works well.

  • How to display success message in function module

    Hi Experts,
                      I am developing new function module regarding URL finder. As per my requirement ,
                                                 If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
    how to display success message.if possible can You write the code.
    Thanks
    raju

    Hello,
    We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
    Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
    Hope this might help you!
    Regards,
    MM Jaffer.

  • How to change table border color in DW CS6

    I need to know how to change the color of the border around my tables in Dreamweaver CS6. I saw a article on how to change it on http://forums.adobe.com/message/4451812, but i really couldnt follow because im just starting out using dreamweaver and i dont know anything about code. Is there a simple way to change the border color or can you give me a basic step process on how to change the border color in the code?

    Just an FYI, nobody uses Table-based layouts anymore.  It's much better to use CSS for layouts.  Only use tables for tabular data like spreadsheets and charts.
    Dreamweaver has a bunch of pre-built CSS Layouts for you to use as starter pages.  Just go to File > New > Blank page > HTML.  Pick a layout from the 3rd panel and hit Create button.  See screenshot below.
    Nancy O.

  • How to identify the DDL changes ?

    Hi all,
    How to identify the DDL changes done to the database ?
    By triggers only Or we can use Logminer also OR
    SELECT * FROM USER_OBJECTS where object_type = 'TABLE' order by LAST_DDL_TIME desc;
    OR
    is there any other options are available ?
    Thanks in advance,
    Pal

    Something from asktom might help
    tkyte@TKYTE816> create or replace trigger ddl_trigger
    2 after create or alter or drop on SCHEMA
    3 declare
    4 l_sysevent varchar2(25);
    5 l_extra varchar2(4000);
    6 begin
    7 select ora_sysevent into l_sysevent from dual;
    8
    9 if ( l_sysevent in ('DROP','CREATE') )
    10 then
    11 if l_sysevent = 'CREATE'
    12 then
    13 begin
    14 select 'storage ( initial ' || initial_extent ||
    15 ' next ' || next_extent || ' .... )'
    into l_extra
    16 from all_tables
    where table_name = ora_dict_obj_name
    17 and owner = user;
    18 exception
    19 when no_data_found then null;
    20 end;
    21 end if;
    22
    23 insert into log
    24 select ora_sysevent, ora_dict_obj_owner,
    25 ora_dict_obj_name, l_extra
    26 from dual;
    27 elsif ( l_sysevent = 'ALTER' )
    28 then
    29 insert into log
    30 select ora_sysevent, ora_dict_obj_owner,
    31 ora_dict_obj_name, sql_text
    32 from v$open_cursor
    33 where upper(sql_text) like 'ALTER%' ||
    34 ora_dict_obj_name || '%'
    35 and sid = ( select sid
    36 from v$session
    37 where audsid=userenv('sessionid') );
    38 end if;
    39 end;
    40 /

  • Change submenu text color

    How would I go about changing the text color of the submenu items without changing the text color of the main menu items?

    Add the following style rule to your document
    ul.MenuBarHorizontal ul a {
        color: red;
    changing the colour to suit.

  • How to display success message when data is changed in the custom tab in MM

    Hi,
    I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
    But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
    Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
    Thanks in advance,
    sudhanva

    Hi Sudhanva,
    The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
    But the message issued by SAP is not related to this Function Exit.
    If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will  not issue the message.
    In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
    I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
    Hope this helps.
    Regards,
    Abhisek.

  • Hi folks! How do we change effects on timeline? For instance advanced lighting will gone slowly...

    How do we change effects on timeline? Please let me know

    Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC

  • How to change the background color of a sequence?

    I'm using Premiere Pro CS5 on Win7 x64.  I've imported a JPEG that's a different size than my 1920 x 1080 frame.  The background of this JPEG is white, but the background of the sequence is black (by default), so the borders of the JPEG make it stand out.  I want the JPEG to blend into the sequence background by making the sequence background white.  How can I change the sequence background color?  Thanks.

    Jim and Ann are correct. I can see where someone used to After Effects might ask that question though because in AE you can change the background color of the composition. Same with Photoshop.
    However, I think it would confuse things if changing the background color were to be allowed in Premiere Pro. Black tells me something. I suppose white could tell me the same thing, but at this time it is not possible in Premiere Pro.

  • Why does effects change the document color? Is their a solution?

    When I create a PMS background color to a page and then add an effect, like dropshadow to an object like a square, the background changes to a dark, muddier color. How can I resolve this?

    What's happening is that by applying transparency, you're invoking the CMYK Transparency Blend Space (found under the Edit menu). That will convert objects on the page to CMYK at printing time. This will change bright PMS colors to duller CMYK colors.
    I'd suggest changing your background color to CMYK, or ditching the transparency effect. Or else apply transparency on all your pages so they'll look the same.
    Also, you need to be aware that in order to print transparency and spot colors together at print time you printer has to turn on overprinting to render them correctly. Otherwise you'll see a white box behind your drop shadow effect:
    http://www.pfl.com/tbp

  • How can I publish the "levels" effect to final cut pro x?

    Hello,
    I'm trying to publish all of the color correction plugins from motion into final cut pro x, the "levels" effect in particular. I have read the instructions in the manual and published all the parameters and then saved it to send it over to final cut pro x but the problem that I'm having is when I open it up in final cut pro x all the parameters are there except for the histogram and its controls, what am I doing wrong and how can I fix it? Thanks.

    The short answer is you can't publish the levels graphic UI (you can, but it doesn't work in FCPX - all you get is the collection of the individual slider controls.)
    You can create a shape with a gradient fill. Set a middle color tab and a second opacity tab. You can use Link parameter behaviors from the color/opacity tabs to the the filter > Levels parameter controls. Use the color tabs for Black In, Gamma and White In. Use the Opacity tabs for Black Out and White Out.
    You can publish the shape's gradient.
    The problem is, to publish this UI, you're publishing an actual gradient and people will be able to make alterations to the gradient (it won't change how it operates the levels controls.) The other problem with it is that it is possible for users to accidentally pull off or add new tabs which will immediately break the effect (and immediate "undo" should repair it though). Then, figuring out how to manipulate the Gamma control is going to be a trick (I haven't figured out yet.) The values go from 5 (all the way left) to 0 (all the way right - with 1 the 50% mark) for the Gamma control itself, but the UI controller (the middle tab on the gradient) moves the control in the opposite direction and the values are logarithmic in scale. You can use the mid-tab control on the gradient linked to the gamma parameter value, but it won't behave the same way as you would expect a genuine levels control to behave (left to right goes from black to white when the expectation would be the opposite.)
    A gradient with links into the filter is about the only way to go if you want it give it a shot.

  • How do you change the background color not of the video clip, but the background the clip is on?

    How do you change the background color upon which the clip resides...
    I don't want to change anything within the clip itself, but the matte(?)
    from black to white or cream.
    I am working with Elements 10...

    Create a color matte of the desired color and place it on video track 1.  Then place your video on track 2.
    from here: Adobe Premiere Elements Help | Creating specialty clips
    Create a colored matte for a background
    You can create a clip consisting of a full‑frame matte of solid color, which you can use as a solid background for titles or animated clips.
    Brightly colored mattes can serve as temporary backgrounds to help you see transparency more clearly while you adjust a key effect.
    Click Project Assets. 
    In the Project Assets panel, click New Item from the panel options and choose Color Matte. 
    Choose a color in the Adobe Color Picker dialog box, and click OK. 
    A color matte clip is placed into both the Project Assets panel and the Expert view timeline.

  • How to accomplish the glowing eye effect?

    Hello fellow Motion 5 folks. A Motion noob here. How do I get the glowing eye effect similar to what was done here:
    http://youtu.be/GqQ5i3sTg5A
    I tried searching all over the net for tutorials in doing this but came out empty handed. Most of them were for After Effects which I do not use. Anyway if someone could tell me how to do it or at least point me towards a link of a tutorial or a book that could get me up to speed on this effect, that would be great. TIA!

    Here's an outline for how to do this effect, it should get you close enough to do what you need.  BTW, this is how I would approach it, that doesn't mean it's the only way.  You will need to be familiar with:
    Motion Tracking
    Bezier Shapes
    Blend Modes
    Keyframing & Animation
    If you haven't already, check out the Motion user manual sections on these topics, they go into deeper details than I'll give here for how to use and control things.
    -Use the Analyze Motion behavior to track the eyes.  If you plan to do mimic what's happening in the example video, I'd do a reverse track since the eyes start out closed. Track each eye, and then go back and clean errors in the track if needed. 
    - Once you have the tracking done, use the shape tool and create a bezier shape for each eye.  Make the shapes fit as close to to the border of the eye and eyelid as possible.
    -Apply a match move behavior to each shape and reference the Analyze Motion behavior. The shapes should now be tracking to the eyes., but depending on the camera movement, head movement, or blinking, the shapes won't always match, we'll fix that next.
    -Turn on animation recording, and at the first frame and the last frame, adjust the bezier shapes to fit the eye, this will give you the start and end points for the shape animation. Now go through the shot and look for "extreme" movements,( the end of head turns  or tilts, blinks, etc).  Continue to adjust the shapes to fit, but not on every frame.  Try not to create too many keyframes so you get a smooth animation.   At this point, you are basically rotoscoping  the shape. While doing this I usually turn off the layer, so you just see the shape outline and control points. Turn off the animation recording when done.
    -For each eye, change the shape color to blue, red, green, whatever you want the main glow color to be. This will create the foundation shading like your example clip (blue edge glow glow).  Go to the Blend mode for the layer and change it to Add or Screen.
    -Duplicate the layer, change the top copy to a lighter version of the original color, or almost white.  Don't use white, that will limit control for later steps. Change the blend mode to Screen.
    (Here's where things get fun)
    -Add a blur or feather the shape for the bottom, darker colored layer.  As I mentioned previously, this is what will primarily affect the color part of the glow.
    -Now you can continue to duplciate either the colored or light shape layers and play with the blur or feather to adjust and build up the glow.  When set to Add or Screen, each layer will make the overall appearance brighter.  Here are a few additional suggestions possibilities to play with.
    -If you want the pupils still visible, use screen and adjust the brightness of the color, or opacity of each layer.
    -Use different amounts of blur or feather for each shape layer. As I rule of thumb, I always use at least 3 layers for glows. Just don't go to heavy, remember, subtle always looks better.
    -Try slight variations in color and brightness for each shape.
    -Have fun experimenting!
    Good luck!

Maybe you are looking for