How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

Similar Messages

How to display success message after Remote service call

Hi ,
I am currently using Flex form for adding/updating user
personal details.On submit button click ,i am submitting details to
server by calling RPC remote service.For calling remote service i
am using penneframework. On penneframework, Remote service call
result are populated in RemoteResult object. It dont have any other
event method for handling result event.For errror handling, i have
defaultHandler for displaying error message.
Here i am having two requirements
1. I should be able to track RPC response, so that i can
display success message to user along with DB generated ID.
2. I need to reset all form field after receiving RPC
response.
Here my question is
1.How i can track server response, so that i can display
success or error message.
2. Is their any event or coding technique which i can use for
solving this issue.
Thanks
Kumar

you can do following way :
quote:
var token:AsyncToken =
YourRemoteClass.remoteMethod(param1,param2);
token.addResponder(new AsyncResponder(
function(data:Object, token:Object):void {
// tadaaa response
function(info:Object, token:Object):void {
//ooooo , noo, failure
token

How to display success message when data is changed in the custom tab in MM

Hi,
I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
Thanks in advance,
sudhanva

Hi Sudhanva,
The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
But the message issued by SAP is not related to this Function Exit.
If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will not issue the message.
In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
Hope this helps.
Regards,
Abhisek.

How to display Success Message on the Left side of Screen

I am displaying a Process Success Message after the ApplyMRU process, *#MRU_COUNT# row(s) updated*. By default, this message is displayed at the center of the screen. I would like to display this message at the left hand side of the screen.
I am using APEX 4.0; Theme Sand - 10. I have tried changing the alignment for the success message position in the Page Template – One Level Tabs, HTML Body section. But I am not having any luck.
Does anyone know how to change/override the default position for the success message?
Thanks

Andy,
I tried what you suggested and the success message is still being displayed in the center of the page.
I went to Template --> Page --> One Level Tabs. In the Header, I put the following lines before the </head>
<style type="text/css">
.t10messages {text-align:left;}
</style>
</head>
<body #ONLOAD#>
#FORM_OPEN#
I do not have any other custom CSS. Just strictly using Theme 10 - Sand
Any ideas on what else could be the reason?
Thanks,
DP
Sorry for the delayed response - out for holidays.

How to display Success Message in PDF

Hello all
I need to display a success messgae in ODF. but without he message box.
It should be such that, after the success, the user should not click yet see the success message.
I got only MEssageBox. But that gives a pop up.
Please let me know about other methods.
Regards,
Aditya Deshpande

If you are using Web Dynpro then you can make use of the MessageArea control and display the messages there.
Alternatively if you want to achieve this in Adobe itself then probably you will need to play with a text field and hide / unhide depending upon your execution.
High level steps would be:-
1. Create a TextField / TextArea element and bind it to the success node in your form. Initially you need to hide it.
2. Upon submission, when the execution is complete then unhide it and show the message displayed the response you receive.
PS: You will need this to be an Interactive Form for this to work.
Chintan

How to Suppress information message from Function module ?

Hello Every one ,
I have a problem when executing the function module in RF Tranasaction ,   I have a requirement to create a handling units through COPAWA transaction, i am using few function modules which is using by transactions , in that the function module it is giving an information message from FM COHU_EXBEREIT_LINE_CHECK, i need to use this function module becuase it will validate the entries . that is the reason i am using it
but I want to suppress the message .,
Any suggestions , please.
Thanks in Advance.
Nags

Add an Exception error_message while calling your function module in the program. It will suppress S, I, W messages
EXCEPTIONS
   CHECK_ERROR      = 1
   OTHERS           = 2
   ERROR_MESSAGE    = 3.                 " Add this line also

Display Success Message in Web Service

Hi All,
I Have created web service for function module, when executing web service in navigator its working fine. Here Exception message display in output but success message not display. Success message working in Function Module but not display in Web service. How to display success message in web searvice.
Code used for success message in Function Module:
Message S001(ZMSG).
Thanks,
Chandra

Hello,
Dont think you can use custom message classes in RFC's. Try using a generic message and check if the message is being populated.
Vikranth

How to display error message in case of function module ?

In the report i was using " message-id " to display error message....
how to use in function module ?

Hi,
Messages in Function Modules and Methods
Messages have two different functions in function modules and methods:
Normal Messages
If you use messages in function modules and methods without the RAISING addition in the MESSAGE statement, and the caller does not catch the message, the message is handled
normally according to the context in which it is called within the function module or method.
Triggering Exceptions with Messages
If you use messages in function modules and methods with the addition
... RAISING <exc>
the way in which the message is handled depends on whether the calling program handles the exception <exc> or not.
If the calling program does not handle the exception, the message is displayed and handled according to the context in which it occurs in the function module or method from which it
was called.
If the calling program handles the exception, the message is not displayed. Instead, the procedure is interrupted in accordance with the message type, and processing returns to the calling program. The contents of the message are placed in the system fields SY-MSGID, SY-MSGTY, SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Catching Message in the Calling Program
You can catch messages from function modules that are not sent using the RAISING addition in the MESSAGE statement by including the implicit exception ERROR_MESSAGE in the
EXCEPTIONS list of the CALL FUNCTION statement. The following conditions apply:
Type S, I, and W messages are ignored (but logged during background processing)
Type E and A messages trigger the exception ERROR_MESSAGE
Type X messages trigger the usual runtime error and short dump.
Catching messages is not currently supported for methods.
Regards,
Bhaskar

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
                        MODE c_n
                        MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
    MOVE v_pernr TO i_bdcerror2-pernr.
    MOVE c_infotype TO i_bdcerror2-infty.
    MOVE 'Error' TO i_bdcerror2-msgtype.
<b>    SELECT SINGLE text
      INTO v_msgtxt
      FROM t100
      WHERE sprsl = i_error2-msgspra
      AND arbgb = i_error2-msgid
      AND msgnr = i_error2-msgnr.
    MOVE v_msgtxt TO i_bdcerror2-msgtxt.</b>
    APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
         'INFOTYPE',
         'MESSAGE TYPE',
         'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
    WRITE: / i_bdcerror-pernr,
           13 i_bdcerror-infty,
           22 i_bdcerror-msgtype,
           35 <b>i_bdcerror-msgtxt</b>.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, <b>MESSAGE_TEXT_BUILD</b> and pass the following values from <b>BDCMSGCOLL</b> or the internal table where you collect the messages.
   i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
   v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to use Logical database in function module?

I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.

You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to find out the inbound function module in the extended idoc

Hi,
how to find out the inbound function module in the extended idocs
Thanks .

through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

How to increase line-size in Function module

Hi All,
How to increase line-size in function module..
I am displaying a list in function module.The output is of width more than 150..
Regards,
Srinivas

Hi Srini,
U can try by setting the system variable SY-LINSZ = 150.
or
Use new page command.
Vasanth

How to display success message in function module

Similar Messages

Maybe you are looking for