How to work with user-exit include?
Hi,
I want to change the field 'No of packages' (LIKP-ANZPK) in VL02N.
I have a func module EXIT_SAPLV50R_001 with an include ZXV50U08, when I double click it's not creating but it says 'Program names ZX... are reserved for includes of exit function groups'.
What should I do?
Thanks!
Tarick.
Hi,
Its just a warning message. Just click enter. It will go inside the FM
Cheers,
Kothand
Similar Messages
-
Can any one tell me how to work with field exit????
Hi
Can any one tell me how to work with field exit I know how to create them. I want to know how it works. Actually I want to create a field exit for T-CODE MIRO. Where I want to put the value ebeln of the PO Reference tab into the Assignment of details tab and make Assignment field disable.
Thanks in advanceHi,
Follow the Steps,
1. Go to CMOD transaction
2. From the menu "GOTO->TEXT ENHANCEMENTS->DATA ELEMENTS- ->NEW DE CUST DOCU".
3. In the displayed box specify the data element and
press either "CHANGE" or " Ref to screen" button
4. CHANGE button is for defining the documentation
5. "Ref. to screen" if for assigning the screen in which
a field has the this type data element.
Note: You should have used this data element for a
field in that screen.
6. Now it will ask for Function Module name, specify the
FM name and double click it. It will go to the editor.
7. Now using the Import parameters code accordingly
8. Activate and go back
9. Now "Assign the created program ( that is FM) to the
screen by specifying the Program name and Screen
number.
10. Now save and activate.
Note: No need to create a separate project for creating field exit through transaction CMOD.
I hope this is suffice.
Regs,
Venkat Ramanan -
Can any one tell me how to work with call stacks
i am working with user-exits and facing problem with call stacks , i want to keep a error message .
Use this FM to trace the program Call stack list: SYSTEM_CALLSTACK.
Hope That Helps
Anirban M. -
Trouble hitting breakpoint in User Exit Include
Greetings,
I am having a problem where I cannot get a transaction to stop at a breakpoint that I have set in a user exit include program (<b>ZXEDFU02</b> starting from transaction <b>VF04</b>) and I cannot figure out why. I am sure that the exit code is being executed because of the results, and if I put a syntax error in this include and activate and execute, i receive a short dump at the syntax error - evidence that the program is in the include code.
I have even tried switching on system and update debugging just to be sure, but no matter what I cannot hit this exit. The exit for those unfamiliar allows the addition of additional data to segments of the INVOICE02 IDOC in SD.
Thank you in advance for any help you can provide.
GeoffHi Geoff,
The problem most probably lies with the fact that in default mode VF04 does not perform the update logic synchronously (for performance reasons). The only thing that is performed synchronously is the selection of the data, the bundling of the data into work packets, and the submission of these work packets for execution.
Thus, you do not hit your break point for debugging (the actual code gets executed either in a background or update work process). You will, however, get short dumps if the synchronous section of the program uses any function module in the function group in which you have introduced syntax errors (hence how you can get short dumps but still not stop at the break point).
The way to solve this is right down the bottom of the VF04 transaction you have an option for Update:
Asynchronous
Synchronous via VB log
Synchronous w/o VB log
By default it is set to the first option. If you choose either option 2 or 3, you should then run the update logic synchronously and stop at your breakpoint.
If this still doesn't work, you have still another thing to try. Before hitting execute, put in /H at the okcode. When you hit execute it will throw you into debug mode. Hit the settings button (far right) and flag the option 'In background task: do not process', and then continue. Any background processes started will be thrown up into another session in debug mode. Go to this other session and hit continue. You SHOULD stop at your breakpoint if it is being processed as a background job.
If this still doesn't work then you have some options for update debugging. Let me know and I'll see if I can help.
Cheers,
Brad -
How to use/activate user exits
Hi all,
i wish to use user exit COZF0001...
however i have no experience how to do it. do i need an ABAPer or other consultant to do it or can i just activate it and make it work with minimal instructions?
kindly give procedure/overview how to activate/use user exits.
thanks in advanceHi Ramesh,
Go to transaction CMOD . Create a project called ZVA01. Choose the Enhancement assign radio button and press the Change button. In the first column enter COZF0001.
Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed
Click on Save . Go to Components. You can now see that enhancement uses the user exit EXIT_SAPLCOZF_001. Double click on the exit and add your code.
Activate the include program. Go back to CMOD and activate the project.
-- Shivaji -
Issue with user exit ZXPADU01 and ZXPADU02
Hi,
I am trying to change the existing record for the info type 0015 for an employee in Pa30 transaction.
my requirement is i need old value and new value when i am changing the existing record in info type 0015.
When i kept break point in user exit ZXPADU01 it is not triggering it is triggering only when we creating the record.
i tried with user exit ZXPADU02 it is not working as per my requirement.
My requirement is :whenever i am changing the existing record(modifying record) i need old value and new value.
Anybody can suggest me how to fix this issue.
Thanks,
MaheedharDear Maheedhar,
The best way to achieve this requirement is to use the PAI user exit ZXPADU02 import parameter PSAVE. The PSAVE parameter contains the PBO original / initial record, before any changes take place.
The INNNN parameter contains the current PAI record as usual, in order to be used for customer check and new values. Thus, you've got both the old and the new record in place, and you can make your comparison according to the business requirements: -
IS_U_METER_READING_DOWNLOAD --- User Exit Include
Hi,
i have copied the IS_U_METER_READING_DOWNLOAD into ZIS_U_METER_READING_DOWNLOAD.
Here i want to write some logic on User Exit. But How to find User Exit in IS_U_METER_READING_DOWNLOAD?
Please give me way how to find the User Exit for any application form in EFRM Transaction.
Regards
BaluHi,
You can add user exit to any of the nodes in Hierarchy.
There are maximum of three user exit, that you can add to any node.
1. Before Exit
2. During Exit
3. After Exit
Just double click on any node in hierarchy in which you want to add the user exit. For the window, you will be provided with the option to add the user exit.
Define the exit you want to add and save it. Automatically, the exit will be added for the code logic, in the main include defined in the Attributes of the application form. (If not defined, please create the include and add it in the attribute).
Use of User Exit -
1. Exit Before Loop is called only once per entire execution, before processing of form level. It can be used for making additional selection and pre sorting arrangement.
2. Exit During loop is called once for each line item. (It is called in loop).
3. Exit After Loop is also called only once at the end of processiong of form level. -
Hi All,
How to find out User Exit in particular program.
I mean if you have one profile, how to find is there any user exits in that program.
Appreciate if any body tel answer.
Thanks & Regards,
SubbuYou could try searching the main program for "userexit_"
This would give you a list of all the available user exits within the application.
For Customer exits, you could search SMOD with a short description ex: order in the F4 help. Another way is to search for CUSTOMER-FUNCTION in the main program. You can then navigate to the enhancement in the customer function and use the Z Program in the enhancement.
http://www.easymarketplace.de/userexit.php - has a complete list.
More specifically, in case you're looking for SD exits - http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm. -
How to find out user exits of t-code va03
hi all
how to find out user exits of any t-code .
regards
deepakHi Deepak,
<b>Try this code.</b>
*& Report Z_USEREXIT *
REPORT Z_USEREXIT
NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
<b>plz reward points if helpful or if it solves ur query.</b>
Thanks
Chinmay -
How to find the user exits and BADIS from SPRO
Hi all,
please let us know how to find the User exits or BADIS for an application from SPRO.
Regards,
MadhaviHi Varisetty,
Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
For User Exit:
Put "/h" in the command box (to start debugging)
Execute your transaction
When you enter debugging - put a breakpoint at statement
CALL CUSTOMER-FUNCTION
the control will stop at all calls to User Exits
For BAdi (it's simpler)
Go to class CL_EXITHANDLER in SE24
Enter method GET_INSTANCE
Put a breakpoint in this method
Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
Cheers,
Adi -
How to find the user exit for a screen..
Hi,
plz help me how to find the user exit for a screen..?
Regards
AnbuHi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat. -
Please help me with user-exits or baids for TCode : FOE2 & FOE1
Hi Experts
Please help me with user-exits or baids for TCode : FOE2 & FOE1.
I found these but not picking values from VIMI01,VIOB03 and VIOB41.
User-exits
FVCH0001 CH-specific enhancements: Esp. POR
ISRE0001 Determine bank procedure account no.
ISRE0002 IPD reporting data retrieval
Business Add-in
FVD_HANDLE_FORMULA Processing of Condition FormulasHi,
ASk your basis regarding the CI_CSKB table active issue, and first of all i dont see any table with the name CI_CSKB.
And check this exit-COOMKS03 whether it works for your screen exits.
Cheers!!
VEnk@
Edited by: Venkat Reddy on Nov 4, 2008 5:59 PM -
How do we handle User exits in XML Publisher
Hi,
Can anyone tell me how do we handle user exits in XML Publisher ?
Thanks,
Kiran.Do tyou mean the original Oracle Reports user exits ?
If so then the flexfield ones are handled in the data template, check the user guide. Format currency should be called in the template layer. You do not need srw.init with data templates.
Regards, Tim -
Getting Login error while working with User Management
Hi,
I am new to EBS and learning to work with 'User Management'.
I have EBS 11i installed on XP.
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.
Thanks in advance for any helpful hint.
Regards,
Sohail.Hi,
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*Please mention the navigation path to reproduce the issue.
Also, please check Apache log files for any errors.
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.Please see (How to to Define an Application User That Has All The Priviledges in User Management Responsibility options As SYSADMIN User [ID 378262.1]).
Thanks,
Hussein -
User Exit - Include for delivery document?
Can anyone please tell me the user exit / include details that control creation / mofiication of outbound delivery document
I need to figure out a solution to create a split delivery if the country of origin of material is different in the stock
Say, if the SD order line item requires 76 units, and the stock has 50 units from one country and 26 from another, then it should result in split deliveries - each with line item of a unique country of originSM,
If the origin country is different (say US for line item 1 for Qty 75, and GB for line item 2, qty 25 wouldn't you have different plants & shipping points for each line item?
Scenario: At the time the sales order is created, there are 100 on a single line all for the same country (because as you say, it is not known during Order create). Then, when it comes time to create the delivery, you know that 75 come from US and 25 from GB. So, reduce qty on line item to 75 (US plant & Shipping Point), and create a new line item for 25 (GB Plant & shipping point). Then, your copy routines from Sales Order to Delivery would force you to split between different deliveries.
A sales order can have different shipping points - one for each line, but the delivery holds the shipping point at the header, so you cannot mix them.
Maybe you are looking for
-
Error while obtaining JCO connection.
Hi I'm trying to put in place since BW-SEM RSPLAN the transaction, I'm pointing at my portal from the transaction RSPLSA But when it signs the user gets the message Error while obtaining JCO connection. I was reviewing my WebDynpro on my site by foll
-
Help! I am running Windows 7. My version of Itunes wouldn't update and showed a missing file. I followed directions and have deleted the old version of ITunes. Now I can't reinstall. I get an error message saying I must have admin priviledges on the
-
How Do I Create A Slideshow in Iweb?
How do I Create a slideshow in Iweb with arrows to right and left, just like this link: http://www.thinkfa.com/ Thanks in advance!
-
Correct Posting Manual Bank Statement - Transaction Code FF67
Hello, It would be very grateful if someone can advice me on an issue pertaining to transaction code FF67. A posting has been made with the wrong posting date. Also, the posted amount has not been recorded in FI because the amount posted was not allo
-
My app store is not connected to my itunes account, but an old friends. she changed her password and im no longer able to get apps. my ipod is connected to my itunes account, but not app store. how do i get the app store to sync with my itunes accoun