How to write a programm in abap to the variables in tree format using inter

if we take the elements as A,X,Y,D,E,F,G,H,Z.
A is parent node.
X,Y are child nodes of A.
D,E,F,are child nodes of X.
G,H,Z,are child nodes of Y.
the output will be like this if we any elements
A X D E F Y G H Z.
here a has two child nodes.
X has a parent node A and child nodes D E F.
Y has parent node A and child nodes G H Z.

Hi Ramana,
Welcome to SDN
Just go through the demo programs provided by SAP. Goto SE38, type BCALV_TREE* and hit F4. You'll get a list of demo programs for trees.
Hope this helps.
Regards
Anil Madhavan

Similar Messages

How to write strings with an underline on the TOP-OF-PAGE of ALV

How to write strings with an underline on the TOP-OF-PAGE of ALV

if u r using classes and methods it can be done
but if u r using normal fms and then u have to use HTML_TOP_OF_PAGE but the drawback for this it cannot be printed when the report is printed .

How do I combine text and photos on the same page in iPhoto using photobook

How do I combine text and photos on the same page in iPhoto using photobook?

You mean while creating a book in iPhoto? Click on the layout button while viewing a page and select the layout that includes both text and photos. Most themes will have those options.
OT

How can we get a alert message in the current browser we are using the mom

how can we get a alert message in the current browser we are using the moment we have entered some data in
the table...
I need a popup alert the moment a new record is added in a table... in apex database is 11g xe..
The idea is I am using a apex application. .The moment new data is added in the table ..I am alerted by a message window..that a new record has been added...
Thanks
Edited by: pauljohny on Jun 11, 2012 10:23 AM

pauljohny wrote:
how can we get a alert message in the current browser we are using the moment we have entered some data in the table...
"Current browser"? When viewing anything, or just when using an APEX app?
Ans .. Just when using apex app....even if the apex app is minimised ..The current browser will be the one where I am using apex app...
What i am looking for some scheduler .. to check ..in the table every 5 minute for change if there is a change..then a popup alert be shown...
Split it into [at least] 2 components, database and browser. I'd expect someone calling themself a "DBA Architect" to have some ideas about the database side of things, even if not clued up on JavaScript and AJAX?
I dont think its a database isssue... When i say to check every 5 minutes ..it could be easily done via dbms_scheduler ...I am having issue in getting the popup alert message...
in apex... Dont know wether there is a plugin like modal window(available from skill builder) which shall help in this scenario,.Or might be have to use java scripting and ajax ..
and if it is that (Java scripting and Ajax) .....then shall have to be familiar with java scripting and Ajax...and this shall be a bit time consuming..
Had a feeling this could be accomplished via java scripting and ajax.. ...but still looking for some easy way..

I lost my I phone 4 , how to track it's imei number from the apple id that I used in that lost iPhone

I lost my I phone 4 , how to track it's imei number from the apple id that I used in that lost iPhone

The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, and running iOS 7.0, then phone cannot be activated or the passcode removed without knowing your Apple iD/Password. It will be nothing but a useless paperweight.
If not running iOS 7.0, the phone can be forced into recovery mode & restored.

How can i find my lose iphone with the same apple id i use now

how can i find my lose iphone with the same apple id i use now

If you set it up on your iPhone before you lost it then you can sign into your iCloud account on a computer and attempt to locate it.

How to write bdc programme to load the data in table control

Hi
i have to write a bdc programme and the data to be filled in table control fileds can any one help me with the code how i have to write it is for cs02 tcode
thanks and regards
naveen

Hi Naveen,
See the sample code
PERFORM bdc_dynpro      USING 'SAPLCSDI' '0100'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC29N-DATUV'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=KALL'.
PERFORM bdc_field       USING 'RC29N-MATNR'
                                w_matnr.
PERFORM bdc_field       USING 'RC29N-WERKS'
                               w_werks.
PERFORM bdc_field       USING 'RC29N-STLAN'
                                '1'.
PERFORM bdc_field       USING 'RC29N-DATUV'
                                '01/01/2004'.
PERFORM bdc_dynpro      USING 'SAPLCSDI' '2110'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=FCPU'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC29K-BMENG'.
PERFORM bdc_field       USING 'RC29K-BMENG'
                                w_testuph.
PERFORM bdc_dynpro      USING 'SAPLCSDI' '0150'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC29P-MENGE(02)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=FCBU'.
PERFORM bdc_field       USING 'RC29P-MENGE(01)'
                                w_testuph.
"For raw material.
IF NOT w_raw_mat_fg IS INITIAL.
    PERFORM bdc_field       USING 'RC29P-MENGE(02)'
                               w_testuph.
ENDIF.
PERFORM bdc_dynpro      USING 'SAPLCSDI' '0130'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC29P-POSNR'.
PERFORM bdc_dynpro      USING 'SAPLCSDI' '0131'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC29P-POTX1'.
PERFORM bdc_dynpro      USING 'SAPLCSDI' '0130'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC29P-POSNR'.
PERFORM bdc_dynpro      USING 'SAPLCSDI' '0131'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC29P-POTX1'.
PERFORM bdc_dynpro      USING 'SAPLCSDI' '0150'.
CALL TRANSACTION 'CS02' USING bdcdata MODE w_display_mode UPDATE 'S'
             MESSAGES INTO t_message_tab.
Prabhudas

How to write Sync service in ABAP

Dear Experts,
              i m very new to ABAP dev, can anybody help me how to write a sync service in ABAP and how to call a function module in to that sync service.
               My requirement is i want to upload the data from the clint and download the data to client from the backend. i had written the function module to create a customer in CRM, now i want to push the data to create a customer from the client, for this i need to write a sync service for above requirement,
            plz help me out how to write a sync service.
                       Regards
                        eswar

Hi Jyotirmoy,
Check this thread for Subquery
http://help.sap.com/saphelp_nw04/helpdata/en/dc/dc7614099b11d295320000e8353423/content.htm
Correlated, non-scalar subquery:
REPORT demo_select_subquery_1.
DATA: name_tab TYPE TABLE OF scarr-carrname,
      name LIKE LINE OF name_tab.
SELECT carrname
INTO TABLE name_tab
FROM scarr
WHERE EXISTS ( select *
                   FROM spfli
                   WHERE carrid   = scarr~carrid AND
                         cityfrom = 'NEW YORK'        ).
LOOP AT name_tab INTO name.
WRITE: / name.
ENDLOOP.
This example selects all lines from database table SCARR for airlines that fly from New York.
Scalar subquery:
REPORT demo_select_subquery_2.
DATA: carr_id TYPE spfli-carrid VALUE 'LH',
      conn_id TYPE spfli-connid VALUE '0400'.
DATA: city TYPE sgeocity-city,
      lati TYPE p DECIMALS 2,
      longi TYPE p DECIMALS 2.
SELECT SINGLE city latitude longitude
INTO (city, lati, longi)
FROM sgeocity
WHERE city IN ( select cityfrom
                    FROM spfli
                    WHERE carrid = carr_id AND
                          connid = conn_id      ).
WRITE: city, lati, longi.
This example reads the latitude and longitude of the departure city of flight LH 402 from database table SGEOCITY.
Thanks,
Vinay

How to write rfc when value change in the screen (browser) in webdynpro.

Hi,
I want to know how can i write an RFC when screen value change in webdynpro. I already designed a rfc where all the value can be seen in the webdypro screen. Now when user change the value how can i pick the changed value in R/3 so that i can save it into the respective database. Please send some code for understanding it easily as i am new to this field.
Regards
Deep

Hi Deepak,
Though I dint understand your requirment properly but as it is raised in Web Dynpro forum I considering that you want to send the data filled by the user to your backend using RFC calls. For this purpose you can refer to this two documents available on SDN.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/creating%20a%20web%20dynpro%20application%20accessing%20abap%20functions.pdf">Tutorial 4</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d352a790-0201-0010-5082-b1a608d22b6c">Tutorial 5</a>
Regards
Sid

How to write a Query a table and the return result is the column name

Hi All
Pls advise how to write a query whereas the return result is the
column name.
I know there is describe <table_name>;
Is there any other ways?
Pls advise
Tj
Edited by: user600866 on Oct 14, 2008 12:13 AM

Data Dictionary table user_tab_columns has all the column names. You can query that and get what ever you want.
To get the column list of a table just query
select *
from user_tab_columns
where table_name = <your_table>Edited by: Karthick_Arp on Oct 14, 2008 12:18 AM

In ActionScript 2.0 , How can I send HTTP request and get the response in JSON format.

I am using ActionScript 2.0 for my app development. I have checked XML and LoadVars class. These classes by default send/receive data either in XML or name/value pair format. I want to send data in JSON format and receive the response in JSON format. How can I achieve this behavior using AS2.0. I have noticed that AS3.0 has the capabilities to do so. My client platform doesn't support AS3.0. Can anybody suggest a way to achieve this?
Thanks in Advance.

Atlast I am able to find the solution for this problem. In the end solutioin is very simple.
Following steps will help in sending request in JSON format.
1. extend LoadVars class
2. override toString method. (It should return JSON format )
3. Use subclass to send the request.

How to create a Lync policy to force the AD picture to be used.

Hi there
We are using office 365 and ADFS, how we can create a Lync policy to force the AD picture to be used.
Best regards,

On-premise this works
New-CsClientPolicy -DisplayPhoto PhotosFromADOnly
however in o365 I believe there only these options
PLEASE REMEMBER, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answered"

How to write java programme

can any one how help me to write java programme

nani,
can anyone help me to write java programmeI can't resist a good flame.
Yes we can probably all assist, in differing measure, in such a lofty goal. Now pray tell, which of the approximately 2 gazillion possible programs where you thinking of tackling? Let me take a punt... might it the ubiquitous "Hello World"?
Hmmm... yep lots & lots of people can probably help you that one... I wonder of any of them will?
Seriously, I suggest you start here, and (after a good chuckle - laughter is very good for you you know) move onto here and/or here
Have fun.
keith.

How to write a subquery in ABAP

Please send some example of subquery !

Hi Jyotirmoy,
Check this thread for Subquery
http://help.sap.com/saphelp_nw04/helpdata/en/dc/dc7614099b11d295320000e8353423/content.htm
Correlated, non-scalar subquery:
REPORT demo_select_subquery_1.
DATA: name_tab TYPE TABLE OF scarr-carrname,
      name LIKE LINE OF name_tab.
SELECT carrname
INTO TABLE name_tab
FROM scarr
WHERE EXISTS ( select *
                   FROM spfli
                   WHERE carrid   = scarr~carrid AND
                         cityfrom = 'NEW YORK'        ).
LOOP AT name_tab INTO name.
WRITE: / name.
ENDLOOP.
This example selects all lines from database table SCARR for airlines that fly from New York.
Scalar subquery:
REPORT demo_select_subquery_2.
DATA: carr_id TYPE spfli-carrid VALUE 'LH',
      conn_id TYPE spfli-connid VALUE '0400'.
DATA: city TYPE sgeocity-city,
      lati TYPE p DECIMALS 2,
      longi TYPE p DECIMALS 2.
SELECT SINGLE city latitude longitude
INTO (city, lati, longi)
FROM sgeocity
WHERE city IN ( select cityfrom
                    FROM spfli
                    WHERE carrid = carr_id AND
                          connid = conn_id      ).
WRITE: city, lati, longi.
This example reads the latitude and longitude of the departure city of flight LH 402 from database table SGEOCITY.
Thanks,
Vinay

How to write POJO for XML file.. i do not want to use JAXB or any other tec

How to generate POJOs for the specific xml files.
Each XML file will have elements name with Type. Which in turn related to some other xml file
For example
student.xml
<student name"mystudent">
<studentname type="firstname"/>
<studentname type="firstname"/>
<studentname type="firstname"/>
</student>
firstname.xml
<studentname name="firstname">
<stufirstname type="myfirstname"/>
</studentname>
myfirstname.xml
<myfirstname name="myfirstname">
<myname1>xxx</myname1>
</myfirstname>
like this there will be so many xml files interlinked.
I would like to write POJOs for these xml files
please let me know what is the best way to write (design the hirarchy of these xml files
Thanks in advance
srinivas

Not at this time. You may submit your polite feedback to Apple using this webpage: http://www.apple.com/feedback/itunesapp.html

How to write a programm in abap to the variables in tree format using inter

Similar Messages

Maybe you are looking for