How to write a tab in a listbox

Hello,
I work with Labview 8.5 and I try to write several sentences with tab (\t) in a listbox but it does not work.
The Tabs are represented like simple space (\s) ?!
See my example in attached file
Nono
Attachments:
TabInListbox.vi ‏10 KB

As far as I know you can't display tabs in listboxes. One thing you may want to do to consolidate your code is to use a look to generate your item names, using the Format Into String function to allow you to easily change the spacing in once place, rather than in each individual string:
Message Edited by smercurio_fc on 07-08-2008 09:29 AM
Attachments:
TabInListbox_BD.png ‏3 KB

Similar Messages

Hi i want to know how to write a tab to a file

hi,
this is ayesha.
I have a requirement wherein i am writing to the windows\hosts file an ipaddress followed by tab followed by domain name.
ex:
127.0.0.1 localhost
192.133.4.34 ayesha.com
113.24.5.34 basic.com
And the code i have used is:
public static void main(String[] args) {
// TODO Auto-generated method stub
System.out.println("*****************starting of the program");
//System.out.println("irfan"+'\u0009'+"lets see");
//System.out.println("irfan");
try {
File f = new File("C:\\WINDOWS\\system32\\drivers\\etc\\hosts");
RandomAccessFile raf = new RandomAccessFile(f,"rw");
// Read a character
char ch = raf.readChar();
// Seek to end of file
raf.seek(f.length());
// Append to the end
// raf.writeChar('\n');
String toBeSubstituted=System.getProperty("line.separator");
raf.writeBytes(toBeSubstituted+"aString"+"\t"+"end"+"\t"+"end");
// raf.writeBytes("\t"+"end");
raf.writeBytes(toBeSubstituted);
raf.writeBytes(toBeSubstituted);
System.out.println("ending the application*******************************************************");
raf.close();
But my problem is when i write:
raf.writeBytes(toBeSubstituted+"aString"+"\t"+"end"+"\t"+"end");
I get the output on a new line as :
astring end end(ie astring followed by space followed by tab followed by end)
But i want to write "astring" followed by tab followed by end..................
Can anyone help me in this????????????????????
And why it is printing the space instead of tab the first time and a tab the second time.
Regards,
Ayesha.

Okay, first, why are you using RandomAccessFile and writing bytes? Use a FileWriter, probably with a PrintWriter wrapped around, and just send Strings.
pw.println(ipAddress + "\t" + hostName);

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

How to write Protect endprotect concept in Smartforms

hi
can any one suggest me
How to write Protect endprotect concept in Smartforms
i have some content to coem without break in SMARTFORM
how to do that
Thanks & Regards
kalyan
<thread moved, has nothing to do with ABAP Objects. Please choose your forums more carefully in future>
Edited by: Mike Pokraka on Sep 26, 2008 12:50 AM

Hi,
For 4.7 version if you are using tables, there are two options for protection against line break:
- You can protect a line type against page break.
- You can protect several table lines against page break for output in the main area.
Protection against page break for line types
- Double-click on your table node and choose the Table tab page.
- Switch to the detail view by choosing the Details pushbutton.
- Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on one page.
Protection against page break for several table lines
- Expand the main area of your table node in the navigation tree.
- Insert a file node for the table lines to be protected in the main area.
- If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file.
- Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page Protection option set are output on one page.
In 4.6, Alternatively in a paragraph format use the Page protection attribute to determine whether or not to display a paragraph completely on one page. Mark it if you want to avoid that a paragraph is split up by a page break. If on the current page (only in the main window) there is not enough space left for the paragraph, the entire paragraph appears on the next page.
Regards,
Himanshu Verma

How to define the "tab" ,"enter" character in a variable(type c)

I want to use the define the "tab" key and
"enter" key in a variable(type c),
But I don't know how to write it :
for example:
data: a1 type c(1).
data: a2 type c(1).
a1 = ?. " the tab key
a2 = ?. " the enter key

Hi, i think joseph fryda gave you the one solution.
In the server which doesn't support CL_ABAP_CHAR_UTILITIES, here is another solution.
data:
    C_X1                  TYPE X VALUE '0D',
    C_X2                  TYPE X VALUE '0A',
    C_X3                  TYPE X VALUE '09',
    LC_ENTER(2)           TYPE C,
    LC_TAB                TYPE C.
enter key
CONCATENATE C_X1 C_X2 INTO LC_ENTER.
TAB key
LC_TAB = C_X3.

How to add new tab screen in transaction BP

Hi,
   Please let me know How to add new tab screen in transaction ukm_BP. Is there any SPRO configuration needed for this?
Thanks,
Debi.

Hi,
You may also try the exits available with the MIGO transaction. To find exits you can use the fillowing code by giving tranasaction code as input.
REPORT zrmexitfinder                               .
TABLES: modsap, modact, tstc.
PARAMETERS: input1 LIKE tstc-tcode DEFAULT ' ',
            input2 LIKE modsap-typ DEFAULT ' '.
DATA: search1(6),
      search2(3),
      search3 LIKE modsap-member.
DATA : first_row VALUE 'Y'.
CONCATENATE: '%' input1 '%' INTO search1,
'%' input2 INTO search2.
SELECT * FROM tstc WHERE tcode LIKE search1.
first_row = 'Y'.
CHECK tstc-pgmna NE space.
CONCATENATE '%' tstc-pgmna '%' INTO search3.
SELECT * FROM modsap WHERE typ LIKE search2
AND member LIKE search3.
    SELECT SINGLE * FROM modact WHERE member = modsap-name.
    IF first_row EQ 'Y'.
      WRITE: /0 tstc-tcode, 6 tstc-pgmna, 16 modsap-name, 32 modsap-typ,
             45 modsap-member, 70 modact-name.
      first_row = 'N'.
    ELSE.
      WRITE: /16 modsap-name, 32 modsap-typ, 45 modsap-member, 70 modact-name.
    ENDIF.
    CLEAR : modsap, modact.
ENDSELECT.
IF sy-subrc NE 0.
    WRITE : /0 tstc-tcode, 6 tstc-pgmna, 30 'No exits found'.
ENDIF.
CLEAR tstc.
ENDSELECT.
END-OF-SELECTION.
CLEAR: search1, search2, search3.
Regards,
Renjith Michael.

How to make my tab page shows all my applications?

How to make my tab page shows all my applications?Please help me as fast as possible. Thx .
Note: Please write as detail as possible because I am new to vb.Thx again.

Hi,
For a lack of info about what Applications you are talking about we can only guess at what you want to do. In my experience, this is the kind of question that ends up being a mile long with 15 different examples because nobody knows exactly what you
are trying to do.
With that said, maybe you can put a ListView in your TabPage and use the code i showed in the link below. If not then please explain exactly what you want to do. 8)
How to make a screen that displays 'all apps'?
If you say it can`t be done then i`ll try it

How to write a query?

Hi all,
Can you please explain me how to write a query joining tables in SAP ?
Thanks,
Avani.

Hi
Check info from sdn only
User T-code: SQVI
Enter your "query name" and press"create"
Enter title
In Data source " select Table join"
select basis mode and press continue.
Press Insert table and give the tabes one by one.
Drag the parameter and drop in another table to establish link and link all the tables.
Press check to check whether your link is correct, then press back
You will be able to see the tables and fields on left hand side.
Select the appropriate parameters for selection fields and list fields
Selection fields- For selection of data, the initial screen of report.
List fields are nothing but output.
Execute the report.
You will find the initial screen of report.
Give your parameters for output and execute again.
You will receive the desired output.
You can down load the output in spread sheet/ in the format desired.
At last save your query before coming out of transaction
Vishal...

How to Convert Jquery Tabs To A URL Link When Selected

The following page has three tabs in the content area. Courier Times, The Intelligencer and Burlington County Times. http://www.phillyburbs.com/test/pbnew/
When one of the tabs is selected, I want the tab to then become a link to a differnet page. Does anyone know how to write this in jquery?

Beginning on line 1239 of your HTML code, change href="http://example.com" to your desired URLs:
<div style="padding-bottom: 10px; display: block" class="tabsetb" id="alltabs">
<a id="newNavButtonsPB-01" class="tabb active" rel="tncms-block-130437" href="http://example.com">Bucks County Courier Times</a>
<a id="newNavButtonsPB-02" class="tabb" rel="tncms-block-130443" href="http://example.com">The Intelligencer</a>
<a id="newNavButtonsPB-03" class="tabb" rel="tncms-block-130511" href="http://example.com">Burlington County Times</a>
</div>
Nancy O.

How to write numbers in Arabic?

Hi All,
How to write numbers in arabic?
(how will you in normal papers....assume 123 to be in the arabic numerals here).
Should it be:
| -123|
(or)
| 123-|
Thanks,
Jana

Try the following.
DecimalFormat formatter_ar=null;
Numberformat form = NumberFormat.getNumberInstance(new Locale("ar","EG"));
if(form instanceof DecimalFormat) formatter_ar = (DecimalFormat)form;
String str = formatter_ar.format(-123.45);
System.out.println(str);

How to write a start routine in the trasnformations ?

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

Hi,
            Yopu can write the below lines of code adn try
    SORT source_package BY Receive nr Type ASCENDING.
    DELETE ADJACENT DUPLICATES FROM source_package COMPARING Receive nr Type.
But you should make sure which record of the either rows need to deleted
i.e in
F9001;LU;J001;662;
F9001;LU;J002;662
You need to decide to eliminate 1st or 2nd one.(depends on your requirement)

How to write the start routine in the transformations ?

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

How to select multiple values from a listbox

Hi,
I have a list box on my UI which is not allowing me to select multiple values
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
I am working on Jdev 11.1.1.3 and I am using ADF/BC components
How to select multiple values from a listbox ?
Thanks,

Hi,
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
And what is the error ?
Frank

How to write a pgm to change the existing encrypted password

Hi all,
can anybody tell me how to write a pgm to change the existing encrypted password.
thanks in advance.

Well, it's going to depend on how it's implemented in the current system.
But basically it's going to look a lot like the current login actions. Presumably you have something that takes the user ID and password, encrypts the password, looks up the encrypted password in the database matching that user ID, and compares them. This functionality would also take a new password (preferably twice so they can be checked for consistency), and if the existing encrypted passwords match, it will encrypt the new password and put it in the database where the old one was.
And if the application has a mechanism for new users to sign up, it'll look a lot like this as well.
But I'm just guessing. This is all going to depend on how the existing functionality is written. Probably the best thing you can do is talk to a programmer at your organization who has worked on the application, and ask them for help.
Hope this helps anyway.

How to write a sql query to retrieve data entered in the past 2 weeks

Hi,
I have file names and last accessed date(java.sql.Date format) stored in my database table, I would like to know how I can write a query to get the name of files accessed in the past 2 weeks,I use open sql server at the back end.
Thanks in advance.

This has essentially nothing to do with JDBC. JDBC is just an API to execute the SQL language using Java and thus interact with the databases.
Your problem is related to the SQL language, you don't know how to write the SQL language. I suggest you to go through a SQL tutorial (there is one at w3schools.com) and to read the SQL documentation which come along with the database in question. A decent database manfacturer has a website and probably also a discussion forum / mailinglist as well.
I'll give you a hint: you can just use equality operators in SQL like everywhere. For example: "WHERE date < somedate".

How to write a tab in a listbox

Similar Messages

Maybe you are looking for