How to write export dump commad with no datable data only table structure.

How to write export dump commad with no datable data only table structure will there and command for hole schma.
e.g. export dump command for scott schema and all table within scott schema in it no table data should be exported.

If I understand the question, it sounds like you just need to add the flag "ROWS=N" to your export command (I assume that you're talking about the old export utility, not the Data Pump version).
Justin

Similar Messages

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How can I export a file with transparent background?

Hi all,
I know InDesign doesn't allow to export a PNG file, but I need my file to be in image file format with transparent background.
I'm still learning so I am stuck here. How can I export a file with transparent background?

If you can't get the PNG file export to work, you can export a pdf and open it in Photoshop, from there you can save it as whatever you like.

How can I create a query with web service data control?

I need to create a query with web service data control, in WSDL, it's query operation, there is a parameter message with the possible query criteria and a return message contains the results. I googled, but cannot find anything on the query with web service. I cannot find a "Named Criteria" in web service data control like normal data control. In Shay's blog, I saw the topics on update with web service data control. How can I create a query with web service data control? Thanks.

Hi,
This might help
*054. Search form using ADF WS Data Control and Complex input types*
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How to write formulas based on text of columns in another table

We have thousands of formulas stored in a table 'Formulas'. How can we calculate values from a data table 'D1' based on the formulas in 'Formulas'
Table 'D1' has columns:
V1 V2 V3 V4 V5
with standard numeric data.
Table 'Formulas' has columns Date and F1 with value such as
Date F1
2013 'v1=v2+v3'
2014 'v1=v2*v5'
The formulas in 'Formulas' are date-specific and also can change over time, so the solution must be dynamically generated during execution.
Thanks!

If the table is relatively small, you may try:
IF object_id(N'TempDB..#D1') IS NOT NULL
DROP TABLE #D1;
CREATE TABLE #D1 (
Id INT identity(1, 1) PRIMARY KEY
,v1 DECIMAL(10, 2)
,v2 DECIMAL(10, 2)
,v3 DECIMAL(10, 2)
,v4 DECIMAL(10, 2)
,v5 DECIMAL(10, 2)
,formula VARCHAR(200)
INSERT INTO #D1 (
v1
,v2
,v3
,v4
,v5
,formula
VALUES (
10
,12
,14
,8
,3
,'v1=v2+v3'
7
,5
,3
,9
,4
,'v5=v1*v2'
DECLARE @sql NVARCHAR(max)
SET @sql = stuff((
SELECT ' UNION ALL
SELECT Id, ' + quotename(formula, '''') + ' AS Formula, ' + CASE left(formula, 3)
WHEN 'v1='
THEN substring(formula, 4, len(formula))
ELSE cast(v1 AS VARCHAR(30))
END + ' AS v1,' + CASE left(formula, 3)
WHEN 'v2='
THEN substring(formula, 4, len(formula))
ELSE cast(v2 AS VARCHAR(30))
END + ' AS v2,' + CASE left(formula, 3)
WHEN 'v3='
THEN substring(formula, 4, len(formula))
ELSE cast(v3 AS VARCHAR(30))
END + ' AS v3,' + CASE left(formula, 3)
WHEN 'v4='
THEN substring(formula, 4, len(formula))
ELSE cast(v4 AS VARCHAR(30))
END + ' AS v4,' + CASE left(formula, 3)
WHEN 'v5='
THEN substring(formula, 4, len(formula))
ELSE cast(v5 AS VARCHAR(30))
END + ' AS v5
FROM #D1 WHERE ID =' + cast(Id AS VARCHAR(30))
FROM #D1
FOR XML PATH('')
,TYPE
).value('.', 'varchar(max)'), 1, 12, '')
PRINT @SQL
EXECUTE (@SQL)
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

How to export and import only data not table structure

Hi Guys,
I am not much aware about import ,export utility please help me ..
I have two schema .. Schema1, Schema2
i used to use Schema1 in that my valuable data is present . now i want to move this data from Schema1 to Schema2 ..
In schema2 , i have only table structure , not any data ..

user1118517 wrote:
Hi Guys,
I am not much aware about import ,export utility please help me ..
I have two schema .. Schema1, Schema2
i used to use Schema1 in that my valuable data is present . now i want to move this data from Schema1 to Schema2 ..
In schema2 , i have only table structure , not any data ..Nothing wrong with exporting the structure. Just use 'ignore=y' on the import. When it tries to do the CREATE TABLE it (the CREATE statement) will fail because the table already exists, but the ignore=y means "ignore failures of CREATE", and it will then proceed to INSERT the data.

How to reset the wiki server (MAC OS X 10.9 with OS X Server App Version 3) with all wiki datas only

Hi,
I need to reset my Wiki on MAC OS X 10.9 with OS X Server App Version 3, but without reinstalling the whole server app to configure all services.
Does anybody knows how to reset the wiki server (MAC OS X 10.9 with OS X Server App Version 3) with all wiki datas only.
Thanks a lot for your hints

Hi Linc,
sorry, I haven't saved the System-Logfile before restoring my parallels VM.
But it looks like issues of linking data.
For testing the Server services I have done a reset for a user password and I have deleted the profiles and configuration from Client-Side. One with Mac OS X 10.9.1, one iPad with iOS 6.1.3. But it was not possible to reconfigure/reinstall the Server Profile. Also a manually configuration was odd, because for some services the new password was necessary and for other services the old password. Very strange.
To bring back the services I have rolled back the last snapshot of my parallels VM. Afterwards there was no probleme to reconfigure/reinstall the Profile on Client-Side (OS X 10.9.1 and iOS 6.1.3). Also the manually configuration shows the password for all services are matching with the current configuration.
I'm going to install a further parallels VM with Mac OS X 10.9.1 and Server App 3 from scratch to move the services.
Greetings

Export to microsoft excel(97-2003)data only

hi..
im using sap crystal report 13.0.2000.0 version with vs2010..
if report is in land scape mode and
when i export a report to export to microsoft excel(97-2003)data only,then column headers are displaced..
if it is portrait then it working fine..
for landscape mode reports only it is not working

I am not able to reproduce the issue. Make sure you are using SP1:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
If that does not help, define "displaced". A pic may be worth a 1000 words :).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

How can I export m2ts footage with 5.1 audio in PP CS5.5?

Dear All!
I have a 90 minutes project which made from 4 sequence. Sequence settings are the followings : AVCHD 1080p 25fps square pixels , 5.1 channel master audio.
I made the sequences from avchd file-s, which recorded with Sony HDR-CX700V with AVCHD 1080p 25fps and Dolby digital 5.1 sound.
Right now I finished the project with lots of effects and imported After effects compositions, and I cannot find any setting to create 5.1 sound.
I have Mainconcept codec suite, but this offer m2ts 1440*1080i settings only.( And I cannot configure the mainconcept codec settings.)
Do you have any idea how can I export the project without any degradation, and with 5.1 audio? The original footages recorded with this properties : H264/AVC - top field first - 22.000 Mbit/sec.
And I use in the project some 720p H264/AVC - progressive - 8.001 Mbit/sec videos.
Please help! Thanks a lot.

You have to consider a couple of things. Mixing 1080 and 720 material is best done in a 720 sequence, because uprezzing will seriously deteriorate quality, unless you accept black borders. That also means exporting a 720 format as maximum, unless again you accept serious quality loss. Whatever the resolution you choose, exporting AVCHD material to anything else than uncompressed, Lagarith or UT will entail a generation loss and thus quality loss. The best export settings are dependent on your delivery medium. DVD, BD or web.
Since you are working in a 1080 sequence, the quality loss of uprezzed 720 material is not a big issue, apparently, so what is the relevancy of 'the same quality' on export when you have already compromised quality?

How to write XSJS Select Query with input parameters

Hello Experts,
I am creating a xsjs file and in that file I am trying to write a Select Query based on a Calculation View
I have tried it the following way:
var query = 'SELECT TOP 100 \"Name\", \"Address\", \"City\", \"Country\" FROM \"_SYS_BIC\".\"Test.HL/AddressView\"'
+ 'WITH PARAMETERS(\'PLACEHOLDER\' = (\'$$P_Name$$\', \' Akhil \'),'
+ '\'PLACEHOLDER\' = (\'$$P_City$$\', \' Lucknow \'))';
But it gives me the "Mixed spaces and tabs error".
How should I write XSJS Select Query with input parameters?
Regards,
Rohit

>But it gives me the "Mixed spaces and tabs error".
Mixed spaces and tabs has nothing to do with the syntax of the statement. You used both spaces and the tab in the content - which JSLint doesn't like. Remove the beginning spaces of each line and use only one or the other.
The actual syntax of your statement doesn't look right. The problem is that you are escaping the \ when you don't need to if you are using ' instead of " for your string. You escape with \" in the first line but then escape with \' in the 2nd and 3rd line. That is going to cause serious parsing problems with the command.

Export dumps failing with ORA-31623: a job is not attached to this session

Hi,
Oracle Version : 11.1.0.7.0
OS Solaris : 10
Export partition dumps failing with the Error message ORA-31623: a job is not attached to this session via the specified handle.
When i checked the table dba_datapump_jobs, i found several table is in "NOT RUNNING" status. Please help me what to do this?
OWNER_NAME JOB_NAME OPERATION JOB_MODE STATE DEGREE ATTACHED_SESSIONS DATAPUMP_SESSIONS
OAM BIN$wzWztSbKbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSbZbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztScGbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSaxbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSbAbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSbPbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSbobFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSb3bFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSanbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSb8bFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSa2bFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OWNER_NAME JOB_NAME OPERATION JOB_MODE STATE DEGREE ATTACHED_SESSIONS DATAPUMP_SESSIONS
OAM BIN$wzWztSbtbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSbFbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSbybFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztScLbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSasbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSbUbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztScBbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSa7bFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSbebFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
OAM BIN$wzWztSbjbFjgRAAUT9ZhNg==$0 EXPORT TABLE NOT RUNNING 0 0 0
21 rows selected
Regards,
Deeban

Hi,
I read this is some site to stop or kill the data pump jobs. But i wants to know anyone tried this and whether this is recommendable to do or not?
we can now stop and kill the job:
SET serveroutput on
SET lines 100
DECLARE
h1 NUMBER;
BEGIN
-- Format: DBMS_DATAPUMP.ATTACH('[job_name]','[owner_name]');
h1 := DBMS_DATAPUMP.ATTACH('SYS_IMPORT_SCHEMA_01','SCHEMA_USER');
DBMS_DATAPUMP.STOP_JOB (h1,1,0);
END;
Regards,
Deeban

How to write or paste words with cyrillic font

Hi all,
I am having a difficulty in write and paste words with cyrillic (russian) font. currently, I am using acrobat 7 standard and windows 7 professional 64 bit. anyone can help me out?
thanks.

No matter which language, you basically have to find out which encoding your files are in and specify that when reading them using a InputStreamReader.
I can't tell you what encodings there are specialized in arabic characters, but there are a few general-purpose encodings that you might try: UTF-8 and UTF-16 are possible candidates, as they can represent every Unicode character.
Also note, that you really need to know the encoding and you can't reliably "guess" the encoding of any random input file.
Read http://www.joelonsoftware.com/articles/Unicode.html
It's titled "The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)", which describes it quite well.

How to run webi report automatically with the current date/system date in webi report

Hi Friends,
I have a webi report which has a date prompt now. Based on the selection that user makes while running a report, he will get the related data for that particular date selection. Now I want to make that date prompt automated that is the report should run automatically based on the system date daily on scheduling.
I want it to run current day automatically without have to go in and pick the date in webi report. I will be scheduling the webi report. Can you please let me know how to achieve this functionality of running a webi report automatically with a system date.
Please let me know if I couldn't make you understand so that I will write with an example.
Waiting for your valuable solutions.
Thanks in advance.
Regards,
Bhaskar

Hello Bhasakar,
1.Create sysdate object in the universe
2.Create another query in webi and select only sysdate object
3.In the original query drag the Day object in the filter pane and choose the "List of values" from another query.and select the sysdate object from the second query.
So your report always will run for sysdate...
regards,
Naveen D

Export / import tablespace with all objects (datas, users, roles)

Hi, i have a problem or question to the topic export / import tablespace.
On the one hand, i have a database 10g (A) and on the other hand, a database 11g (B).
On A there is a tablespace called PRO.
Furthermore 3 Users:
PRO_Main - contains the datas - Tablespace PRO
PRO_Users1 with a role PRO_UROLE - Tablespace PRO
PRO_Users2 with a role PRO_UROLE - Tablespace PRO
Now, i want to transfer the whole tablespace PRO (included users PRO_MAIN, PRO_USER1, PRO_User2 and the role PRO_UROLE) from A to B.
On B, I 've created the user PRO_Main and the tablespace PRO.
On A , i execute following statement:
expdp PRO_Main/XXX TABLESPACES=PRO DIRECTORY=backup_datapump DUMPFILE=TSpro.dmp LOGFILE=TSpro.log
On B:
impdp PRO_Main/XXX TABLESPACES=PRO DIRECTORY=backup_datapump DUMPFILE=TSpro.dmp LOGFILE=TSpro.log
Result:
The User PRO_Main was imported with all the datas.
But i 'm missing PRO_USER1, PRO_User2 and the role PRO_UROLE...
I assume, i 've used wrong parameters in my expd and / or impdp.
It would be nice, if anybody can give me a hint.
Thanks in advance.
Best Regards,
Frank

When you do a TABLESPACE mode export by specifying just the tablespaces, then all that gets exported are the tables and their dependent objects. The users, roles, and the tablespace definitions themselves don't get exported.
When you do a SCHEMA mode export by specifying the schemas, you will get the schema definitions (if the schema running the export is privied) and all of the objects that the schema owns. The schema does not own roles or tablespace definitions.
In your case, you want to move
1. schemas - which you already created 1 on your target database
2. roles
3. everything in the tablespaces owned by multiple schemas.
There is no 1 export/import command that will do this. This is how i would do this:
1 - move the schema definitions
a. you can either create these manually or
b1. expdp schemas=<your list of schemas> include=user
b2 impdp the results from b1.
2. move the roles
expdp full=y include=role ...
remember, this will include all roles. If you want to limit what gets exported, then use:
include=role:"in ('ROLE1', 'ROLE2', ETC.)
impdo the roles just exported
3. move the user information
a. If you want to move all of the schema's objects like functions, packages, etc, then you need to use a schema mode
export
expdp user/password schemas=a,b,c ...
b. If you want to move only the objects in those tablespaces, then use the tablespace export
expdp user/password tablespaces=tbs1, tbs2, ...
c. import the dumpfile generated in step 3
impdp user/password ...
Hope this helps.
Dean

How to write export dump commad with no datable data only table structure.

Similar Messages

Maybe you are looking for