How to write more than 65536 data in excel Via Labview in one column

I have more than 65536 data and i want to write these data in excel sheet. It is giving Error:-
"Description:-
Error -2146827284 occurred at an unidentified location
This error code is undefined. No one has provided a description for this code, or you might have wired a number that is not an error code to the error code input."
Less than 65536 data can be written....
Please give some solution...

This is not a limitation of LabVIEW writing to a spreadsheet file but a limitation of Microsoft Excel (and also of Notepad) itself.
One option could be, you can switch to Excel 2007 or higher verison...!!
Other solution could be, forget about writing to Excel, instead write in some other format and use LabVIEW your other compatible (with large data) application to read it back.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Similar Messages

How to import more than 2k items from Excel(2010) to SharePoint 2010 List?

Hi,
I am getting error while importing more than 2k items from Excel to SharePoint List.
Need solution!!

Hi.
Try to use the Import Spreadsheet list template to import your data.
http://www.dummies.com/how-to/content/import-a-spreadsheet-as-a-list-in-sharepoint-2010.html
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it.

How to handle more than 255 char in excel att. in FM SO_DOCUMENT_SEND_API1

hi all,
Good morning.
My requirement is to send a report as an excel attatchment to the respective managers mail box. For this I am using the function module SO_DOCUMENT_SEND_API1 as follows.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data =
put_in_outbox =
sender_address =
sender_address_type =
commit_work =
tables
packing_list =
object_header =
contents_bin =
contents_txt =
receivers =
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Here the problem is contents_bin is of type SOLISTI1 which takes max 255 characters, As my report columns occupies more than 400 characters, I am unable to get all the column values in excel attachement.
Can anyone please help me to get all the column values in the excel attachment.
Thanks in Advance.

Hi,
Please check the following extract of a sample program I had executed.It deals with how to handle more that 255 chars in excel att in FM SO_DOCUMENT_SEND_API1
Hope this helps....
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
           con_tab TYPE X VALUE '09'. "OK for non Unicode
data : Begin of wa_output ,
          BUFFER(1000) TYPE C, " data to be written into xls format
       End of wa_output.
data : gt_output LIKE wa_output OCCURS 0 WITH HEADER LINE.
data : FIELDNAME_OFFSET TYPE I.
Attachement contents
DATA: BEGIN OF wa_att_cont.
        INCLUDE STRUCTURE solisti1.
DATA: END OF wa_att_cont.
DATA: lt_att_cont LIKE wa_att_cont OCCURS 0.
data : begin of zdfies occurs 0.
             include structure dfies.
data : end of zdfies.
data : begin of it_field occurs 0,
             fldname(40) type c,
       end of it_field.
data : yfilname like RLGRAP-FILENAME value 'C:\Documents and
Settings\'.
data : ok_code TYPE sy-ucomm,
       save_ok TYPE sy-ucomm.
data : flag type i.
********************************Variables*****************************
DATA: lv_count   TYPE i,                   " count
        lv_forwarder LIKE soud-usrnam,       " Forwarder.
        lv_lines TYPE i.                     " no of lines
********************************Structures****************************
DATA: w_doc_data LIKE sodocchgi1,
        w_sent_all(1) TYPE c,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ.
******Structure for Folder ID
DATA: BEGIN OF wa_folder_id.
          INCLUDE STRUCTURE soodk.
DATA: END OF wa_folder_id.
Folder Contents, change attributes
DATA: BEGIN OF wa_object_fl_change.
          INCLUDE STRUCTURE sofm1.
DATA: END OF wa_object_fl_change.
******Object definition, change attributes
DATA: BEGIN OF wa_object_hd_change.
          INCLUDE STRUCTURE sood1.
DATA: END OF wa_object_hd_change.
******Object ID
DATA: BEGIN OF wa_object_id.
          INCLUDE STRUCTURE soodk.
DATA: END OF wa_object_id.
******Object Defintion.
DATA: BEGIN OF wa_sood.
          INCLUDE STRUCTURE sood.
DATA: END OF wa_sood.
******User Definition
DATA: BEGIN OF wa_soud.
          INCLUDE STRUCTURE soud.
DATA: END OF wa_soud.
******Sent to all flag.
DATA: BEGIN OF wa_sonv.
          INCLUDE STRUCTURE sonv.
DATA: END OF wa_sonv.
******Mail contents
DATA: BEGIN OF wa_objcont.
          INCLUDE STRUCTURE solisti1.
DATA: END OF wa_objcont.
******Mail header.
DATA: BEGIN OF wa_objhead.
          INCLUDE STRUCTURE soli.
DATA: END OF wa_objhead.
******Para A
DATA: BEGIN OF wa_objpara.
          INCLUDE STRUCTURE soparai1.
DATA: END OF wa_objpara.
******Para B
DATA: BEGIN OF wa_objparb.
          INCLUDE STRUCTURE soparbi1.
DATA: END OF wa_objparb.
******Receivers list
DATA: BEGIN OF wa_receivers.
          INCLUDE STRUCTURE somlreci1.
DATA: END OF wa_receivers.
Pack list
DATA: BEGIN OF wa_packlist.
          INCLUDE STRUCTURE sopcklsti1.
DATA: END OF wa_packlist.
DATA: BEGIN OF wa_att_head.
          INCLUDE STRUCTURE soli.
DATA: END OF wa_att_head.
********************internal tables******************************
DATA: lt_objcont   LIKE wa_objcont OCCURS 0, "mail contents
        lt_objhead   LIKE wa_objhead OCCURS 0, "mail header
        lt_objpara   LIKE wa_objpara OCCURS 0, "Paragraph A
        lt_objparb   LIKE wa_objparb OCCURS 0, "Paragraph B
        lt_receivers LIKE wa_receivers OCCURS 0," receiver list
        lt_packlist LIKE wa_packlist OCCURS 0,"Pack list
        lt_att_head LIKE wa_att_head OCCURS 0."Attachment Header
**************************Constants***********************************
CONSTANTS: lc_kreuz LIKE sonv-flag   VALUE 'X', "Outbox flag,
             lc_colon(1) TYPE c VALUE ':',
             lc_raw(3) TYPE c VALUE 'RAW',
             lc_f(1) TYPE c VALUE 'F',
             lc_u(1) TYPE c VALUE 'U'.
DATA: w_cnt TYPE i.
data : wa_edition like t_edition.
DATA : i_strlen TYPE i,
        i_off TYPE i ,
        i_len TYPE i VALUE 254,
        i_totlen TYPE i,
        lv_fill_space TYPE i,
        lv_split_times TYPE i,
        lv_len TYPE i.
**>> Populate the attachment contents.*
LOOP AT gt_output INTO wa_output.
    i_strlen = strlen( wa_output ) .
    IF i_strlen LE 254.
      CONCATENATE con_cret wa_output-buffer
           INTO wa_output-buffer.
      APPEND wa_output-buffer TO lt_att_cont.
    ELSE.               " i.e the data is more than 255 characters
     DO 4 TIMES.
        i_totlen = i_off + i_len .
        IF i_totlen = 254.
          wa_att_cont = wa_output+i_off(i_len).
          CONCATENATE con_cret wa_att_cont
          INTO wa_att_cont.
          APPEND wa_att_cont TO lt_att_cont.
        ELSE.
      wa_att_cont = wa_output+i_off(i_len). "splitting more than 255
           APPEND wa_att_cont TO lt_att_cont.
        ENDIF.
        IF i_totlen GE i_strlen.
          CLEAR : i_off .
          EXIT.
        ELSE.
          i_off = i_off + 254.
        ENDIF.
      ENDDO.
    ENDIF.
    CLEAR : wa_output.
ENDLOOP.

How to download more than 100mb data via cellular

When I try to download any app, it says connect to wifi coz the app is more than 100mb.

You can't do it over cellular, you will need to connect your iPad to a wifi network to download it - there is a 100 mb limit per file over cellular
From http://support.apple.com/kb/HT1689 :
Cellular downloads are limited to apps, music, music videos, books, audiobooks, podcasts, and iTunes U files with a file size of 100 MB or smaller, depending on the wireless carrier. You can't download movies or TV shows using a cellular data network, regardless of file size

How to handle more than 250 characters in excel attachment

hi,
i lokesh, actually i am sending a excel attachment through mail. i am using " SO_DOCUMENT_SEND_API1" function module, one problem what i facing is , this function module handle only 250 characters, i need to display more than 250 characters. pls any one knows about this, pls let me know.
regards
lokesh t

Hi,
Xls allows only 250 char.
Cheers

Can't insert more than 8000 rows to excel via JOB

Hello,
I have SSIS package where I have two tasks.
File System task copies file (with header names) to destination folder.
Data flow task export data from table to copied Excel file. Select are simple "select * from table" without any filters.
There are about 100 000 rows in the table.
When I run this task through Visual studio everything works fine. Data to Excel file is exported.
When I run this package in JOB (Job Activity Monitor) the file is created but 0 rows is exported.
One interesting thing, that when I use select "select top 7000 * from table" 7000 rows is inserted but when I try to export more than 8000 rows then 0 rows is exported. The JOB generates 0 errors. In fact he tries to export. Because all the time
Excel's file "Date modified" is changing.
It seems like data is exported but the final "commit" isn't done. Anybody knows where could be a problem?

Out of curiosity I have had a go at reading 70K lines of data from a table in a sql server and exporting them to an excel 2007 file:
SSIS 2012 project deployment
2 project connections: sql database connection for source
and an Excel 2007 connection for destination:
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=F:\Data\Outbox\ExcelOut.xlsx;Extended Properties="Excel 12.0 XML;HDR=YES";
I have an empty excel 2007 file as template with header rows in the first sheet.
I test the project in VS 2012, ran without problems.
I set DelayValidation to true on package level, data flow level.
In data flow, excel distination, ValidataExternal metadata to False.
I deploy the project with the package to an Integration Services catalog on a SQL 2012 server (not my development machine)
I copy an empty excel 2007 file (with the headers in the first row) in the correct file location.
I execute the package from SSMS in the Integration services catalogs, with 32 bit checked.
The package runs without errors.
I can open the excel file and see 70K records.
Last thought: I have no NULL values in my data. Do you have null values after the first 7000 records? Or is one of the excel columns expecting numerical data where it suddenly finds alfanumeric after 7000 rows?
Another suggestion: if you run the package with SSMS from the catalog, you can set the verbose reporting mode on, does that tell you anything more?
Jan D'Hondt - SQL server BI development

How to storing more than 1 data to vector

hi,
I would like to know if I can store the following:
select field1, field2, field3
from tableA
can I store this above data and return the values to jsp page and later used this in either jsp / java file.
in the jsp file I will need to display only field1
anyway can I do the above.

When you submit the form, the request.getParameter("fieldname"); in the servlet (or JSP which is a specialized servlet) will give you the selected customer name. Execute a query like
SELECT CustomerNumber, CustomerAddress FROm CustomerTable WHERE CustomerName = ?The ? corresponds to the selected customer name [If you are using PreparedStatement, which you should preferably, the query will have ? for the parameters and you need to set them].
Define a class with getters/setter to hold the data. Like -
public class CustomerBean {
    // Member variables.
    private String customerName     = null;
    private int customerNumber      = null;
    private String customerAddress = null;
    // Getter methods
    public String getCustomerName()    { return this.customerName;    }
    public int getCustomerNumber()     { return this.customerNumber; }
    public String getCustomerAddress() { return this.customerAddress; }
    // Setter methods
    public void setCustomerName(String customerName) {
        this.customerName = customerName;
    public void setCustomerNumber(int customerNumber) {
        this.customerNumber = customerNumber;
    public void setCustomerAddress(String customerAddress) {
        this.customerAddress = customerAddress;
}As you loop over the ResultSet from the query, create an object for each record to hold the data and add each object to the ResultSet. Set this List as a request (or session, depending on the requirements - a request attribute will exist only till the request is executed i.e. for one navigation; session attribute will exist as long as the session exists). Retrieve the List from the request (or session) attribute and populate the other information, in whatever manner you wish, on the JSP.

How to get more than 4 coloured rows in a report depending on column values

Hi,
I've looked through the forum and found some stuff on mutli-coloured reports and found the link to http://htmldb.oracle.com/pls/otn/f?p=11933:7:557008579481721819
But I have several problems:
This shows how to get 3 colours, but it's easy to get up to 4 by just using the "Column Templates" in a new report template.
I don't understand where to put the snippets. It says to put them in "Row Templates" , "Before Rows" and "After Rows" but my report template page doesn't have these options! I've got "Column Templates" (4 of them), "Before Each Row" and "After Each Row".
Am I looking at a link for an old version?
What I want to do is set the row colour dependant on a column called "level" which is between 1 and 5.
Thanks

Hi Vikas,
It's almost perfect now. My only problem is that the pagination table is, for some reason, enclosed within the results table (I've used FireFox web developer's tools and checked the souce HTML to be sure of this). So, if I have a border at table level, it appears on the row containing the pagination.
I've had to remove table borders and put right borders on the table data cells, but I can't find a way to put left borders on the table rows, so I have a pretty table with 5 levels of colour, but no borders on the left-hand side.
Ideally I'd like to avoid having the pagination stuff within the results table, but I can't see how/where to put a </table> to sort this out!
Ros

How to write output from Keithley 220 to Excel using Labview

Hello, I have seen other posts that ask this question and was wondering if anyone has found the solution? I have downloaded the driver and seem to be able to communicate with the instrument. However, I am not very sure how to modify the driver to set the amperage and record the output to Excel.

Hi rachel-d,
It looks like that instrument driver is only one VI, and is not a certified driver. There seems to be a control for "source (A)" which may be what you're looking for as far as setting the amperage. Honestly, you may have better luck starting with a simple GPIB communication program and writing your own VI. You may need to check your device's manual for information on specific commands to set current values, etc. As for excel, you could use the Write to Measurement File Express VI and write your data to a text-based measurement file (.lvm) that is tab deliminated. You can then open this file with Excel. There are also examples you could look at in the NI Example Finder (Help > Find Examples).
Hope this helps!
Adam W
Applications Engineering
National Instruments

How to get more than 256 bytes data

hello.
I use Schlumberger 32K Card�iJava Card 2.1�j.
Please tell me how to get more than 256 bytes data from the applet in the card!!
According to JCRE specification, need to use Get Response Command.
What is Get Response command?
Do I have to write processing of Get Response command to an applet?
Or JCRE processes Get Response command?
If knows, please tell me about!!
Thanks.

Thanks for your response!!
I understand that I have to write processing of Get Response command to an applet.
But case of Schlumberger 32K card, when host send Get Response command to an applet, card reply 6F-00!?
I'm investigating now, and it seems that response is returned before applet processes Get Response command(CLA = 00, INS = C0).
Do JCRE perform the process of Get Response command?

How to insert more than 32k xml data into oracle clob column

how to insert more than 32k xml data into oracle clob column.
xml data is coming from java front end
if we cannot use clob than what are the different options available

Are you facing any issue with my code?
String lateral size error will come when you try to insert the full xml in string format.
public static boolean writeCLOBData(String tableName, String id, String columnName, String strContents) throws DataAccessException{
boolean isUpdated = true;
Connection connection = null;
try {
connection = ConnectionManager.getConnection ();
//connection.setAutoCommit ( false );
PreparedStatement PREPARE_STATEMENT = null;
String sqlQuery = "UPDATE " + tableName + " SET " + columnName + " = ? WHERE ID =" + id;
PREPARE_STATEMENT = connection.prepareStatement ( sqlQuery );
// converting string to reader stream
Reader reader = new StringReader ( strContents );
PREPARE_STATEMENT.setClob ( 1, reader );
// return false after updating the clob data to DB
isUpdated = PREPARE_STATEMENT.execute ();
PREPARE_STATEMENT.close ();
} catch ( SQLException e ) {
e.printStackTrace ();
finally{
return isUpdated;
Try this JAVA code.

How can I write more than 32k file in oracle directory

Hi experts,
I am struggling while I write more than 32k file size in oracle directory, and throws an error ‘ORA-06502: PL/SQL: numeric or value error, like this.
This is my procedure
declare
l_s_filename   UTL_FILE.file_type;
begin
   l_s_filename := UTL_FILE.fopen ('INFO_MIGRATION', 'finfinne.txt', 'W');
FOR rec
      IN ( SELECT SQL_REDO
              FROM V$LOGMNR_CONTENTS
             WHERE seg_owner <> 'SYS' AND username = 'GENTEST'
             AND TABLE_NAME NOT LIKE '%_TEMP'
                   AND OPERATION IN ('UPDATE','INSERT','DELETE')
          ORDER BY TIMESTAMP)
   LOOP
      UTL_FILE.put_line (l_s_filename, rec.SQL_REDO);
   END LOOP;
   UTL_FILE.fclose (l_s_filename);
end;can any please help me how can I overcome this problem
Thanks,
Arun

You can write by breaking it into small chunks. Also you can try to use DBMS_XSLPROCESSOR.CLOB2FILE. For UTL_FILE the code snippets may looks like
-- Read chunks of the CLOB and write them to the file
-- until complete.
   WHILE l_pos < l_blob_len
   LOOP
      DBMS_LOB.READ (rec.l_clob, l_amount, l_pos, l_buffer);
      UTL_FILE.put_line (l_file, l_buffer, FALSE);
      l_pos := l_pos + l_amount;
   END LOOP;

How to transfer data more than 255 char from excel sheet to internal table.

Hello Experts,
I have a requirement where i have a text field in the excel sheet of more than 255 char and need to be updated in the text element. To do that i need to transfer the excel sheet data to an internal table where one of the field is more than 255 char.
in the standard function module it works only upto 255 char. Can you help me if we have some other way to get more than 255 char in the internal table from excel sheet.
Thanks in Advance.
BR,
RaJ.

Using .xls, it is not possible transfer data more than 255 characters from excel sheet. However if the excel sheet is saved as Comma Delimited format or Tab Delimited format, then using GUI_DOWNLOAD function module data more than 255 characters can be transferred.
File name should be : .csv (Comma Delimited format) or .txt (Tab Delimited format)
File Type would still remain 'ASC' while calling function module GUI_DOWNLOAD
Also In the internal table declare the field type as String or LCHAR.
Eg:
TYPES: begin of ty_file,
        col_a TYPE string,
      end of ty_file.
DATA: i_file type standard table
               of ty_file
             with header line
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\test.csv'
TABLES
    DATA_TAB                      = i_file

How to display more than 132 characters in a smartform

Hi Experts,
I am reading notes/text entries by calling read_text and then passing them in a variable. I want to display the notes. But even after declaring the variable as LINE2048, it is displaying only 255characters as output length in smartform.
My code:
TYPES: BEGIN OF TYP_FINAL,
         PARTNER_NO      TYPE BU_PARTNER,         "Partner No.
        OBJECT_ID       TYPE CRMT_OBJECT_ID_DB, "Object ID
        PROCESS_TYPE    TYPE CRMT_PROCESS_TYPE, "Activity Type
       ACTUAL_NOTE     TYPE LINE2048,           "Actual Notes
       END OF TYP_FINAL.
data : T_FINAL           TYPE STANDARD TABLE OF TYP_FINAL,
          WA_FINAL          TYPE TYP_FINAL.
data: v_actualnote     TYPE LINE2048.
          CALL FUNCTION 'READ_TEXT'
            EXPORTING
             CLIENT                        = SY-MANDT
              ID                            = C_0002
              LANGUAGE                      = sy-langu
              NAME                          = l_name1
              OBJECT                        = C_BUT000
            TABLES
              LINES                         = t_line
           EXCEPTIONS
             ID                            = 1
             LANGUAGE                      = 2
          IF SY-SUBRC = 0.
           clear: v_accountnote.
           LOOP AT T_LINE INTO WA_LINE.
             CONCATENATE v_accountnote wa_line INTO v_accountnote SEPARATED BY space.
             clear: wa_line.
           ENDLOOP.
          wa_final-account_note = v_accountnote.
          clear: v_accountnote.
         ENDIF.
On the smartformm side, under main window->loop->text(to display the variables).
How to display more than 255 characters in a smartform.
Regards,
Sangeeta.

why the heck would you use read_text when you want to print a text/note on a form?
in SAP-Script we use the "INCLUDE"-Statement for this.
and in smartforms a Text-node of type 'I'.
you can not write all in one line and expect the system to handle this like a floating text.
one character takes a cretain amount of space (varying for different characters and font and font sizes).
you Page has a certain width, so where is the miracle in the thesis that on a sheet of paper with a certain width just a certain amount of characters will fit?

How to emai more than one person

hi, can someone please post some code on how to send more than one person the same email, i tried what's below but get an error:
// Send message out as email via JavaMail
// Emails for group 1
String namesOne[] = {"[email protected], [email protected]"};
// Vector to store names
Vector namesInGroup = new Vector();
// Add names to vector
for(int i=0; i<namesOne.length; i++) {
     namesInGroup.add(namesOne);
Properties props = new Properties();
props.put("mail.smtp.host", "???");
Session s = Session.getInstance(props);
MimeMessage message = new MimeMessage(s);
InternetAddress from = new InternetAddress("[email protected]");
message.setFrom(from);
InternetAddress[] to = new InternetAddress[namesInGroup.size()];
String emailOfPerson;
for(int i=0; i<namesInGroup.size(); i++) {
     emailOfPerson = (String)namesInGroup.elementAt(i);
     to[i] = new InternetAddress(emailOfPerson);
message.setRecipients(Message.RecipientType.CC, to);
message.setSubject(subjectOfMessage);
String text = mailText.toString();
MimeMultipart mm = new MimeMultipart();
MimeBodyPart mbp = new MimeBodyPart();
mbp.setContent(text,"text/html");
mm.addBodyPart(mbp);
message.setContent(mm);
Transport.send(message);
// End of JavaMail code
the host is fine, ???, just didn't want to write it there, i've been able to email one person but can't get this to work, i get the following error:
[05/Sep/2002:15:27:03] failure (10730): Internal error: exception thrown from the servlet service function (uri=/WriteAndEmail.jsp): javax.servlet.ServletException: Illegal address, stack: javax.servlet.ServletException: Illegal address
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:384)
at WriteAndEmailjsp._jspService(_WriteAndEmail_jsp.java:291)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:533)
, root cause: javax.mail.internet.AddressException: Illegal address in string ``[email protected], [email protected]''
at javax.mail.internet.InternetAddress.<init>(InternetAddress.java:66)
at WriteAndEmailjsp._jspService(_WriteAndEmail_jsp.java:243)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:533)
both emails are valid.
Thank you.

soni29 wrote:
hi, can someone please post some code on how to send
more than one person the same email, i tried what's
below but get an error:
// Send message out as email via JavaMail
// Emails for group 1
String namesOne[] = {"[email protected],
[email protected]"};
// Vector to store names
Vector namesInGroup = new Vector();
// Add names to vector
for(int i=0; i<namesOne.length; i++) {
     namesInGroup.addElement(namesOne);
Properties props = new Properties();
props.put("mail.smtp.host", "???");
Session s = Session.getInstance(props);
MimeMessage message = new MimeMessage(s);
InternetAddress from = new
InternetAddress("[email protected]");
message.setFrom(from);
InternetAddress[] to = new
InternetAddress[namesInGroup.size()];
String emailOfPerson;
for(int i=0; i<namesInGroup.size(); i++) {
     emailOfPerson = (String)namesInGroup.elementAt(i);
     to[i] = new InternetAddress(emailOfPerson);
message.setRecipients(Message.RecipientType.CC, to);
message.setSubject(subjectOfMessage);
String text = mailText.toString();
MimeMultipart mm = new MimeMultipart();
MimeBodyPart mbp = new MimeBodyPart();
mbp.setContent(text,"text/html");
mm.addBodyPart(mbp);
message.setContent(mm);
Transport.send(message);
// End of JavaMail code
the host is fine, ???, just didn't want to write it
there, i've been able to email one person but can't
get this to work, i get the following error:
[05/Sep/2002:15:27:03] failure (10730): Internal
error: exception thrown from the servlet service
function (uri=/WriteAndEmail.jsp):
javax.servlet.ServletException: Illegal address,
stack: javax.servlet.ServletException: Illegal
address
at
org.apache.jasper.runtime.PageContextImpl.handlePageExc
ption(PageContextImpl.java:384)
at
WriteAndEmailjsp._jspService(_WriteAndEmail_jsp.java:
91)
at
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBa
e.java:126)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java
826)
at
com.netscape.server.http.servlet.NSServletRunner.Servic
(NSServletRunner.java:533)
, root cause: javax.mail.internet.AddressException:
Illegal address in string ``[email protected],
[email protected]''
at
javax.mail.internet.InternetAddress.<init>(InternetAddr
ss.java:66)
at
WriteAndEmailjsp._jspService(_WriteAndEmail_jsp.java:
43)
at
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBa
e.java:126)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java
826)
at
com.netscape.server.http.servlet.NSServletRunner.Servic
(NSServletRunner.java:533)
both emails are valid.
Thank you.
try using addElement()method of the vector.
or get all the address as one string represented by _to
where _to = "[email protected], [email protected]";
     //set to addresss
InternetAddress to = new InternetAddress() ;
InternetAddress [] toadd = to.parse(_to);
msg.setRecipients(Message.RecipientType.CC,toadd);
i hope this wouldhelp you
thanks and regards,
Suraj Berwal

How to write more than 65536 data in excel Via Labview in one column

Similar Messages

Maybe you are looking for