How to write this program

I got one output list .
In that If I  modify any contents in that output list that will directly affect to the data base contents and replace these contents.
Please provide  some solution how we can update.

Some ideas on how to implement the problem that you have.
Server :
1. Let the server listen to requests from various clients to join the game.
2. On receiving a request from a client to play the game add him into a circular list where last node point to the first (Don't forget to hold pointers to first and last nodes ;) ) And each node can store al the details of each client like his host ip, his previous letters and answers, his current score et
3. Create another thread on the server which picks a client from the circular-list and sends him a letter and wait for that particular client to respond. On getting a response from the client, process the word, give him the score and move on to the next node on the circular list. By doing this a round-robin order can be achieved.
Note: Sleep isn't of much use on the server as the server has to be awake always expecting requests and responses from the clients.
Client :
1. Client can be a thread which connects to server and initial sends a request to join the game and waits for response from the sever which will be the "Letter" with which the client will build a word and sent it back to server and goes to sleep until it gets a response from the server which will be the next letter and current score etc
2. Client and server have to agree to a protocol so that they can understand each others responses.
3. If you do not have a network to test this then you can create multiple instances of the client on the same machine and connect all these instances to the server.

Similar Messages

  • Really need help on how to write this program some 1 plz help me out here.

    i am new to java and i confused on how to be writing this program.
    i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.
    Part I
    An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
    Here is an algorithm that calculates the cost of a rectangular window. The
    total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
    square inch (area) and the metal frame is 75 cents per inch (perimeter).
    The length and width of the window will be entered by the user. The
    output of the program should be the length and width (entered by the user)
    and the total cost of the window.
    FORMULAS:
    area = length times width perimeter = 2 times (length plus width)
    Here is the corresponding algorithm:
    read in the length of the window in inches
    read in the width of the window in inches
    compute the area
    compute the cost of the glass (area times 50 cents)
    compute the perimeter
    compute the cost of the frame (perimeter times 75 cents)
    compute the total cost of the window (cost of glass plus cost of frame)
    display the length, width and total cost
    The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
    length = 10
    width = 20
    area = 200, glass cost= 100.00 (area times 50 cents)
    perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
    total cost =145.00
    Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
    If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
    necessary to re-check your hand calculations.
    Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
    ?Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.?
    Part II
    Write, compile and execute a Java program that displays the following prompts:
    Enter an integer.
    Enter a second integer
    Enter a third integer.
    Enter a fourth integer.
    After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
    prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
    (labels).
    Sample Test Data:
    Set 1: 100 100 100 100
    Set 2: 100 0 100 0
    Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.
    Part III
    Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)
    For Part 1 this is what i got
    import java.util.Scanner;
    public class Window
         public static void main(String[] args)
              double length, width, glass_cost, perimeter, frame_cost, area, total;
              Scanner keyboard = new Scanner (System.in);
              System.out.println("Enter the length of the window in inches");
              length = keyboard.nextInt();
              System.out.println("Enter the width of the window in inches");
              width = keyboard.nextInt();
              area = length * width;
              glass_cost = area * .5;
              perimeter = 2 * (length + width);
              frame_cost = perimeter * .75;
              total = glass_cost + frame_cost;
                   System.out.println("The Length of the window is " + length + "inches");
                   System.out.println("The Width of the window is " + length + "inches");
                   System.out.println("The total cost of the window is $ " + total);
         Enter the length of the window in inches
         5
         Enter the width of the window in inches
         8
         The Length of the window is 5.0inches
         The Width of the window is 5.0inches
         The total cost of the window is $ 39.5
    Press any key to continue . . .
    Edited by: Adhi on Feb 24, 2008 10:33 AM

    Adhi wrote:
    i am new to java and i confused on how to be writing this program.
    i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.Looks like homework to me.
    What have you written so far? Post it.
    Part I
    An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
    Here is an algorithm that calculates the cost of a rectangular window. The
    total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
    square inch (area) and the metal frame is 75 cents per inch (perimeter).
    The length and width of the window will be entered by the user. The
    output of the program should be the length and width (entered by the user)
    and the total cost of the window.
    FORMULAS:
    area = length times width perimeter = 2 times (length plus width)
    Here is the corresponding algorithm:
    read in the length of the window in inches
    read in the width of the window in inches
    compute the area
    compute the cost of the glass (area times 50 cents)
    compute the perimeter
    compute the cost of the frame (perimeter times 75 cents)
    compute the total cost of the window (cost of glass plus cost of frame)
    display the length, width and total cost
    The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
    length = 10
    width = 20
    area = 200, glass cost= 100.00 (area times 50 cents)
    perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
    total cost =145.00
    Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
    If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
    necessary to re-check your hand calculations.
    Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
    “Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.”
    Part II
    Write, compile and execute a Java program that displays the following prompts:
    Enter an integer.
    Enter a second integer
    Enter a third integer.
    Enter a fourth integer.
    After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
    prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
    (labels).
    Sample Test Data:
    Set 1: 100 100 100 100
    Set 2: 100 0 100 0
    Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.So this is where you actually have to do something. My guess is that you've done nothing so far.
    Part III
    Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)Man, this specification writes itself. Sit down and start coding.
    One bit of advice: Nobody here takes kindly to lazy, stupid students who are just trying to con somebody into doing their homework for them. If that's you, better have your asbestos underpants on.
    %

  • Really stuck on how to start this program

    Okay, I know I should be posting some code here and showing where I've started and such, but I'm pretty lost as to how to start this program. Here's the problem:
    2. Making Change:
    This application, named ChangeMaker, will take as input a product price and an amount paid,
    both floating-point numbers representing euro and cent amounts. The application computes and prints the amount of change due the user, and also expresses the change amount in number of 2-euros, 1-euro, 20-cent, 10-cent, 5-cent, 2-cent, and1-cent coins.
    (Assume no change is given in bills, only in coins.)
    For example:
    Enter product price: 2.32
    Enter amount paid: 5.00
    Your change is 2.68 euros
    1 x 2 euro
    3 x 20-cent
    1 x 5 cent
    1 x 2 cent
    1 x 1 cent
    You can assume that the amount paid is greater than the product price, and that both inputs are
    "euro and cent" amounts: positive numbers with at most two decimal places.3
    Now, I know how to print the line asking for product price and enter amount paid, but I cannot figure out how to set up the rest of the code when switching from american USD dollars/coins to euros. I looked up the conversions and they are just intimidating as all get out when trying to take the equivalency of euros to each dollar thats entered and then taking the rest of the USD remainders and represent that in USD coinage. >.< Help is much appreciated thank you.

    thomas.behr wrote:
    random0munky wrote:
    ... when switching from american USD dollars/coins to euros. I looked up the conversions and they are just intimidating as all get out when trying to take the equivalency of euros to each dollar thats entered and then taking the rest of the USD remainders and represent that in USD coinage.Uhm, your requirement doesn't say anything about converting between USD and EUR. For starters, just write the program without any currency information at all. (That is only flavour anyways.)
    For example:
    Enter product price: 2.32
    Enter amount paid: 5.00
    Your change is 2.68
    1 x 2
    3 x 0.2
    1 x 0.05
    1 x 0.02
    1 x 0.01That deception would never fly in a Red State -- 20 cent piece? 2 cent piece? 2 dollar coin? All this smacks of Socialism!

  • HOW TO WRITE ABAP PROGRAMMING IN JAVA BY USING NETWEAVER

    HI,
    i am working with bapi(mean is calling bapis in my java programs).
    please tell me the how to write abap programs in nwds
    Thanqqqqqqqqq
    Guru

    Hi,
    Refer the following links..
    http://manuals.sybase.com/onlinebooks/group-iaw/iag0203e/iadgen2/@Generic__BookTextView/24685
    and this blog
    /people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
    Regards,
    Uma

  • Can any one please tell me how to write labview program for data logging in electric motor bike.

    Can any one please tell me how to write labview program for data logging in electric motor bike. I am going to use CompactRIO for getting wide range of data from various sensors in bike. I need to write labview program for data logging of temperature, voltage and speed of the bike. Can any one help me?

    Yes, we can.   
    I think the best place for you to start for this is the NI Developer Zone.  I recommend beginning with these tutorials I found by searching on "data log rio".  There were more than just these few that might be relevant to your project but I'll leave that for you to decide.
    NI Compact RIO Setup and Services ->  http://zone.ni.com/devzone/cda/tut/p/id/11394
    Getting Started with CompactRIO - Logging Data to Disk  ->  http://zone.ni.com/devzone/cda/tut/p/id/11198
    Getting Started with CompactRIO - Performing Basic Control ->  http://zone.ni.com/devzone/cda/tut/p/id/11197
    These will probably give you links to more topics/tutorials/examples that can help you design and implement your target system.
    Jason
    Wire Warrior
    Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

  • How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?

    How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?
    I basically managed to learn how to invert parameters which allows me to be as default in the clean guitar channel and if I switch the first button on the midi foot controller I switch to crunch, but at this point I tryied so hard to programm the second and third button to switch, only through a button in one step, to a third channel for distorsion or a 4th channel for solo guitar but I couldn't figured out how this work can be done!
    I would appreciate if anyone could help or share this experience with others who are experiencing the same problem.
    Cheers.
    F.

    I cannot seem to get mainstage to recognize my FCB either. I am using IFCB. Anyone figure this out?
    Thanks,
    Eric

  • How to write this sql query in php code ?

    for example:
    insert into temp
    select *
    from testtable;
    after this, i will query data from sql below:
    select *
    from temp;
    how to write this php code ?
    who can help me ?
    thanks!

    Have a look at the manual to find out how to issue queries.
    http://us3.php.net/oci8

  • How to write this query to filter combination of few values

    Hi,
    I have a table CHIMM which is a transaction table and contains information of the vaccines given to a child.
    columns are: child_id, vacc_id, vacc_given_dt. I have to query for remaining vaccines.
    HEXA is a vaccine_id which is composite vaccine of DPT1,POL1,HBV1 & HIB1 (vaccine ids).
    I want to write to query if any of DPT1,POL1,HBV1 & HIB1 given then HEXA should not be displayed in the result.
    OR
    if HEXA is given then of course any of DPT1,POL1,HBV1 & HIB1 should not be displayed in the result.
    How to write this query?
    Regards

    Hi,
    I'm still not sure what the output you want from that sample data is. Do you just want the child_ids, like this
    CHILD_ID
           3
           4? If so, here's one way to get them:
    WITH     all_vacc_ids     AS
         SELECT     c.child_id
         ,     c.vacc_id          AS child_vacc_id
         ,     v.vacc_id
         ,     COUNT ( CASE
                             WHEN  c.vacc_id = 'HEXA'
                       THEN  1
                         END
                    )       OVER ( PARTITION BY  c.child_id
                                       )    AS hexa_itself
         FROM          vacc   v
         LEFT OUTER JOIN     chimm  c     PARTITION BY (c.child_id)
                          ON     c.vacc_id     = v.vacc_id
         WHERE   v.vacc_desc       = 'HEXA'     -- See note below
    SELECT       child_id
    FROM       all_vacc_ids
    WHERE       child_vacc_id     IS NULL
      AND       vacc_id     != 'HEXA'
      AND       hexa_itself     = 0
    GROUP BY  child_id
    rha2 wrote:there are alot of vaccines, i just put 3 for example. this query gives error: invalid relational operatorAre you saying that the vacc table contains other rows, but those other rows are not needed for this problem? It would be good if you included an example in the sample data. The query above considers only the rows in vacc where vacc_desc='HEXA'. You can have other rows in the vacc table, but they won't affect the output of this query. The query above makes no assumptions about the number of rows that have vacc_desc='HEXA'; it will report all child_ids who are missing any of them, regardless of the number (assuming the child does not have the 'HEXA' vacc_id itself, like child_id=1).
    You still haven't said which version of Oracle you're using. The query above will work in Oracle 10 (and higher).

  • How to write this query ?

    how to write this query ?
    list the emp name who is working for the highest avg sal department.
    I can use row_number over to get correct result. If we don't use this row_number function, just plain sql, how to do it ?
    the row_number version is like this
    select emp.* from emp ,
    select deptno, row_number() over (order by avg(sal) desc) r from emp
    group by deptno
    )e
    where e.r = 1
    and emp.deptno = e.deptno

    Hi,
    806540 wrote:
    how to write this query ?
    list the emp name who is working for the highest avg sal department.
    I can use row_number over to get correct result. If we don't use this row_number function, just plain sql, how to do it ?ROW_NUMBER is just plain SQL, and has been since Oracle 8.1.
    ROW_NUMBER (or its close relative, RANK) is the simplest and most efficient way to solve this problem. Why not do this the right way?
    the row_number version is like this
    select emp.* from emp ,
    select deptno, row_number() over (order by avg(sal) desc) r from emp
    group by deptno
    )e
    where e.r = 1
    and emp.deptno = e.deptno
    If there happens to be a tie (that is, two or more departments have the same average sal, and it is the highest), then the query above will only arbitrarily treat one of them (no telling which one) as the highest. Change ROW_NUMBER to RANK to get all departments with a claim to having the highest average sal.
    You could use the ROWNUM pseudo-column instead of ROW_NUMBER, if all you want to do is avoid ROW_NUMBER.
    Without using ROW_NUMBER or RANK, there are lots of ways involving other analytic functions, such as AVG and MAX.
    If you really, really don't want to use analytic functions at all, you can do this:
    SELECT     *
    FROM     scott.emp
    WHERE     deptno     IN  (
                      SELECT       deptno
                      FROM       scott.emp
                      GROUP BY  deptno
                      HAVING       AVG (sal) =  (
                                                       SELECT    MAX (AVG (sal))
                                               FROM          scott.emp
                                               GROUP BY  deptno
    ;

  • Which planning function i have to use and how to write this planning fucnti

    Hi Bi Guru's,
    I have rolled out  BW SEM-BPS Planning Layout's for the Annual Budget in my organistaion.
    There are two levels of layout given for the each sales person.
    1)  Sales quantity to be entered Material and  country wise for all 12 months ( April 2009 to March 2010)
    2)  Rate per unit and to entered in second sheet, Material and country wise for the total qty entered in the first layout.
    Now i need to calculate the sales vlaue for each period and for the each material.
    Which planning function i have to use and how to write this planning fucntion.
    Please suggest me some solution ASAP.
    Thanks in Advance,
    Nilesh

    Hi Deepti,
    Sorry to trouble you...
    I require your help for the following scenario for caluclating Sales Value.
    I have Plan data in the following format.
    Country   Material    Customer    Currency    Fiscyear    Fiscper           Qty         Rate        Sales Value
    AZ          M0001      CU001          #             2009          001.2009        100.00                        
    AZ          M0001      CU002          #             2009          001.2009        200.00                        
    BZ          M0001      CU003          #             2009          001.2009        300.00
    BZ          M0001      CU003          #             2009          002.2009        400.00
    BZ          M0002      CU003          #             2009          002.2009        300.00
    AZ          M0001       #               USD          2009             #                                 10.00
    BZ          M0001       #               USD          2009             #                                 15.50
    BZ          M0002       #               USD          2009             #                                 20.00
    In the Above data the Rate lines are entered in the Second Layout, Where the user enters on the Country Material Level with 2009 value for FISCYEAR.
    I am facing problem with this type of data. 
    I want to store the sales value for each Material Qty.
    Please suggest some solution.
    Re
    Nilesh

  • How to write CRM Program.........

    Dear Frnds,
    I am familiar with ABAP but now i want to go with CRM but i have no idea about how to write simple program.
    Is it with scripting and abap code for run simple program..
    which are the transaction code to write program and execute. pls make me familiar with it.
    Regards,

    CRM code is written in same way as ABAP code but tables are different as compared to R/3.
    here oops concept is used in crm-pcui.
    crm middleware is used to connect diff systems like crm and r/3.
    so go thru the transaction crmd_order.
    regards
    dheeraj

  • Hi, I've checked how to use kannada keyboard in Yosemite. But, there are some 'vattu forms' and other grammar in Kannada language that I don't know how to use it. For eg, Preetiya taatanige nimma muddu mommagalu maduva namaskara? How to write this?

    Hi, I've checked how to use Kannada keyboard in Yosemite. But, there are some 'vattu forms' and other grammar in Kannada language that I don't know how to use it. I know how to change between the keyboards and can also view keyboard. However, For eg, 'Preetiya taatanige nimma muddu mommagalu maduva namaskara' How to write this? If anybody can answer this, very much appreciated.
    Thanks in advance for your reply.

    In general, you need to use the "f" (kannada qwerty keyboard) or "d" key (kannada) between letters to make special forms.  Also you may need to adjust the typography settings of the font, which is done by doing Format > Font > Show Fonts > Gear Wheel > Typography as shown below.  If you can provide screenshots or more detailed info on things you cannot make, I can perhaps help.
    It is important to note that MS Word for Mac does not support Indic scripts -- any other app should work OK.

  • Is there another easy way to write this program??

    Hi ,i new in Java Programing,Is there another way to write this program?? This program below is about FIND THE AREA OF A CIRCLE WHEREIN THE RADIUS OF THE CIRCLE RANGES FROM 1 TO 10 BY 1 IN A FOR LOOP.
    import javax.swing.JOptionsPane;
    public class Area2 {
    public static void main(String[] args ) {
    double pi = 3.14;
    int r;
    String a = "Area = ";
    double area;
    for (r = 1; <= 10; r++)
    area = pi * r * r;
    a = a + area + "\n";
    JOptionPane.showMessageDialog(
    null , a);
    System.exit ( 0 );
    I did not write it ,i want to know if is there another way (easy)to write it.
    Thank you very much
    Sincerely Erick.

    Not much to improve upon this. It is a pretty simple program. Note my comment about PI.
    import javax.swing.JOptionsPane;
    public class Area2 {
       public static void main(String[] args ) {
          double final PI = 3.14; // Final because it's a constant value, convention for constants is to use uppercase
         int r;
         String a = "Area = ";
        for  (r = 1; <= 10; r++)
            area  = pi * r * r;
            a = a + area +  "\n";
        JOptionPane.showMessageDialog(null , a);
        System.exit  ( 0 );

  • [SOLVE] How to install this program (PyIpChanger)?

    Hello!
    I'm new to the forum and I wanted you to help me how to install this program.
    https://otland.net/threads/pyipchanger- … ts.157953/
    It is a ip changer for Tibia, to play in OT servers.
    Since there does not exist in the official repositories nor in the AUR, It is necessary install manually, but I can't figure out
    *Sorry my english, I'm not a native speaker.
    Best wishes!
    Last edited by Rearis (2015-05-10 14:52:48)

    Robg told you how to do this:
    robg wrote:
    Just use pacman to install: pyhon2, python2-pyqt4
    After having done that, you can run main.py using pyhon2.
    So install the software, then run:
    python2 PyIpChanger.py
    Last edited by mrunion (2015-05-07 13:36:31)

  • Download photoshop cc and it get stuck at 2%  -  DSL Download at 6 Mbps - How big is this program and why is it frozen at 2%

    download photoshop cc and it get stuck at 2%  -  DSL Download at 6 Mbps - How big is this program and why is it frozen at 2%

    Jimk88 I would recommend reviewing the download logs to determine the exact error.  You can find details on how to locate the download logs at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Maybe you are looking for