How two create UPDATE FUNCTION MODULE

Hi,
I have 2 tables to update one after the other...
I have geard it is advisable to use update function module for this..
can any1 tell me how to create and work with update function modules...
Answers will be rewarded....

Abhay,
How an update function module works is, the execution of the FM is delayed to until when a COMMIT WORK statement is executed.
Hence if you have the data available for updating the two DB tables at the time of calling the FM, you can pass the tables to the same FM and program the DB update for both in the same FM.
However the COMMIT WORK should be outside the FM further down in the calling program.
This link is very good and easy to follow
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/7af4daa79e11d1950f0000e82de14a/frameset.htm
Hope it helps
Aditya[url=http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/7af4daa79e11d1950f0000e82de14a/frameset.htm]
Message was edited by:
Aditya

Similar Messages

How to Create the Function Module Exit

Hi,
How to Create the Function Module Exit. Please tell me the step by step procedure.

Hi,
Check this link for how to create the function module exit..
http://sap.niraj.tripod.com/id62.html
Thanks
naren

How to Create a Function module z_create and to track the error records?

I want to create a function module z_create which will insert the data from the internal tables gt_model_master and gt_model into the corresponding database custom tables y_model_master.
Secondly if any error is encountered during the above updation, then how to track those error records ?

HI,
check the sy-subrc ,if it is zero the insertion is success,otherwise use
message class.
if sy-subrc ne 0.
message e052(zmessage).
endif.
Edited by: rakesh dhudipala on Feb 12, 2008 2:33 PM
Edited by: rakesh dhudipala on Feb 12, 2008 2:33 PM

I'm very new tp SAP ABAP, how to create a function module..V.URGENT

hi folks,
I'm very new to sap abap.
I want to create a function module.
the following is my requirement.
by passing(eporting parameters to funtion module from pgm point of view) a field, i want to get(importing parameters from the funtion module, from pgm point of view) some 7 fields(of various tables).
please also tell me how can code an inner join for tables 5 tables(a,b,c,d,e). i'm joining a on b, b on c, c on d,the problem here is that i can not join d on e as there are no common fields in d and e.
can i join e and c or b, there are no common fields even in a and e.
please tell me the solution as soon as possible, this very important and urgent deliverable.
thanks in advance

Here is link for creating function modules
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/frameset.htm">Creating Function Modules</a>
Regds
Manohar

How to create RFC function module and how to call this function module

Hi,
i want to know step for creating RFC function module and then How to use this function module from some other sap system.
Thnaks,
jigar

Jigar,
To implement a remote function module in ABAP, perform the following steps:
Register the module as remotely callable in the RFC server system.
In the function module Administration screen (transaction code SE37), set the field Can be called via REMOTE CALL. Registering a module as remote causes an RFC stub to be generated for it.
Write the code for the function module.
Create the destinations.....................
Displaying, Maintaining and Testing Destinations
To display, create or modify destinations, choose Tools ® Administration ® Administration ® Network ® RFC destinations or enter transaction code SM59.
Remote Destinations are stored in table RFCDES. The RFCDES table describes logical destinations for remote function calls.
It is not possible to maintain the RFCDES table directly.
You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® AcceleratedSAP ® Customizing ® Execute Project ® SAP Reference IMG.
In the Implementation Guide, expand the following hierarchy structure:
Basis
Application Link Enabling (ALE)
Sending and Receiving Systems
Systems in Network
Define Target Systems for RFC Calls
Displaying Destinations
The initial screen for this transaction displays a tree:
Different connection types (i.e. partner systems or programs) are possible. For further information, see Types of Destinations.
To display all information for a given destination, double-click it, or place the cursor on it and press F2 .
To search for a destination, press the Find button and specify your selection. You get a list of all entries matching your selection. Place the cursor on the one you want, and press F2 or simply double-click the destination. All information for the given entry appears.
Creating Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
All available connection types are explained in Types of Destinations.
To create a new RFC destination, press the Create button. A new screen is displayed with empty fields for you to fill in.
If you want to create a new destination
As you create a remote destination, you can specify a particular application server or a group of servers for a balanced distribution of system load.
For details of the destination parameters, see Entering Destination Parameters.
Changing Existing Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
You can display all information for a given destination by double-clicking it or pressing F2 on it.
To change an existing destination, double-click it, or place the cursor on it and press the Change button.
For details of the destination parameters, see Entering Destination Parameters.
Testing Destinations
To test a destination, choose the appropriate function from the Test menu.
Connection (also available via the Test connection pushbutton)
Authorization (checks logon data)
Local network (provides a list of application servers)
You can use the CALL FUNCTION statement to call remote functions, just as you would call local function modules. However, you must include an additional DESTINATION clause to define where the function should run:
CALL FUNCTION RemoteFunction
DESTINATION Dest
EXPORTING
f1 =...
f2 =...
IMPORTING
f3 =...
TABLES
t1 =...
EXCEPTIONS......
The field Dest can be either a literal or a variable: its value is a logical destination (for example, "hw1071_53") known to the local SAP System. Logical destinations are defined in the RFCDES table (or the TRFCD table in R/2 Systems) via transaction sm59 or the following menu path: Tools ® Administration, Administration ® Network ® RFC destinations. You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® Customizing ® Enterprise IMG. In the Implementation Guide, you can then choose Cross-application components ® ALE ® Communication ® Define RFC destination.
The remote function call concept, for example, allows you to access a function module in an R/2 System from an ABAP program in an R/3 System. If you want to read a customer record from your R/2 Systems database, create a remotely callable function module in the R/2 environment which retrieves customer records. Call this function from your R/3 System using a remote function call and listing the destination for the target R/2 System:
Pls. reward if useful

How can create a function module for currency and quantity fields

hi,
i want to create a function module with some fields.when i activated it give some errors for
netpr,menge,wemng fields(currency, quantity fields).error is it asks for reference fields.
please send me solution for it.
sreenu.

Hi Sreenu,
While creating CURRENCY/QUANTITY fields in the DataBase Table, you have to enter a REFERENCE TABLE and a REFERENCE FIELD to the field.
For that, after entering the field name and the data type in the correcponding columns, you have to place the cursor on the data type of the required field and click the CURRENCY/QUANTITY FIELDS tab. You will find two columns called REFERENCE TABLE and a REFERENCE FIELD.
you have to enter a reference table in which a currency/quantity field is used and a reference field which is a currency/quantity field in that table.
For Example, below is the table details.
FIELD DATATYPE LENGTH DEC.PLACES REF.TABLE REF.FIELD
1.SNO     CHAR 5
2.AMOUNT CURR 10     2          T001      WAERS
3.NOS     QUAN 5                 KNA1      /VSO/R_PAL_UL
Here Field 2(AMOUNT) is a CURR field whose Ref. Table is T001 and Ref. Field is WAERS and Field 3(NOS) is a QUAN field whose Ref. Table is KNA1 and Ref. Field is /VSO/R_PAL_UL.
Hope this will help you.
Regards,
Vaitheeswaran

How to create a Function Module

Hi
Please tell me the procedure to create a function module.
Thanks in advance,
Priya

Hi Srinivas,
In order to create a function module firstly you need to assign it to a function group.
In order to create function group goto t-code se37.
Choose Goto->Function groups-> Create group .
Give the function group name.
Then come back to se37 type in the name of your FM and then press <b>CREATE</b> button.

How to create ENQUEUE function module for s567 table

Hi Experts,
Anyone Plz tell the steps how to create a ENQUEUE function module for the table s567.
Its somewht urgent, plz help me.
<REMOVED BY MODERATOR>
Mohana
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 4:21 PM

Hi,
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
Hope this will give a basic idea.
Regards
Sudheer

HOW to create a function module ..... in abap

pls lemme know ............the steps and procedure in creating a function module

hi GURU,
To Create Function Module first you need to create Function Group and Activate it.
First go to SE37 then
1. Goto>Function Groups>Create Group.
    Here you need to give Group name and Short Text of group.
2. After Creating Function Group again:
   Goto>Function Groups>Change Group.
   Enter your Function Group name and press enter.
   a dialog box will appear where you can see its status is inactive.
So, press <b>Main Program</b> Button and activate your function group.
NOW you Function Group is activated and and you can create Function Module in it.
Now Enter your Function Module Name and press create then
give your Function Group name in respective place and press enter.
Now you can give your Import/Export parameters and and if you want to use TABLES give it in TABLE section only not in Import/Export Parameters.
Then Write Logic in Source Code Tab and Activate it.
if you have any qury regarding it Pls let me know.
Reward if Useful.
Sachin.

How to create the funtion module with step by step

friends can u help me regarding how to create the function module very urgent,
regards
bhavani

To create a function module, you first need to create a Function Group which will keep all the function module of same functionality.
To create a Function Group, go to SE80->Click on Workbench-Edit Object->Function Group Tab->Enter Function Group name-> Click Create.
To create a Function Module:
Go to T.Code SE37->Enter the Function name->Enter Function Group name n Short Des.-> Here you need to define Import, Export parameters with the condition. Also you can write your code in source code tab.
check this link
Converting seconds values
check the FM code. if you don't have this FM code, create it in SE37 and make use of it.
FM MONI_TIME_CONVERT
FUNCTION MONI_TIME_CONVERT.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(LD_DURATION) TYPE SY-TABIX
*" EXPORTING
*" REFERENCE(LT_OUTPUT_DURATION) TYPE SWL_PM_CVH-DURATION
DATA: LD_HOUR(4) TYPE N. "
DATA: LD_MIN(4) TYPE N. "
DATA: LD_SEC(4) TYPE N. "
DATA: LD_VALUE2(2) TYPE N.
DATA: LD_VALUE3(3) TYPE N.
DATA: LD_VALUE4(4) TYPE N.
DATA: SAVE_DURATION LIKE SY-TABIX.
data: ld_minus(1).
SAVE_DURATION = LD_DURATION.
if ld_duration < 0.
save_duration = save_duration * ( -1 ).
ld_minus = true.
endif.
CLEAR LT_OUTPUT_DURATION.
IF SAVE_DURATION NE 0.
LD_HOUR = SAVE_DURATION DIV 3600.
save_duration = save_duration - ld_hour * 3600.
LD_MIN = SAVE_DURATION DIV 60.
save_duration = save_duration - ld_min * 60.
LD_SEC = SAVE_DURATION.
IF LD_HOUR LE 100.
LD_VALUE2 = LD_HOUR.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+3(2).
ELSEIF LD_HOUR LE 1000.
LD_VALUE3 = LD_HOUR.
WRITE LD_VALUE3 TO LT_OUTPUT_DURATION+2(3).
ELSE.
LD_VALUE4 = LD_HOUR.
WRITE LD_VALUE4 TO LT_OUTPUT_DURATION(4).
ENDIF.
WRITE ':' TO LT_OUTPUT_DURATION+5.
LD_VALUE2 = LD_MIN.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+6(2).
WRITE ':' TO LT_OUTPUT_DURATION+8.
LD_VALUE2 = LD_SEC.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+9(2).
LT_OUTPUT_DURATION = LT_OUTPUT_DURATION+1.
if ld_minus = true.
write '-' to lt_output_duration+1(1).
endif.
ELSE.
job running or aborted
ENDIF.
ENDFUNCTION.
Eg:2
Use the following procedure to create a function module
1.From the ABAP/4 Development Workbench screen, press the Function Library button on the Application toolbar.
2.Type the name of your function module in the Function Module field. The name must begin with Y_ or Z_.
3.Press the Create button. The Function Module Create: Administration screen is shown
4.Type the name of a function group in the Function Group field. The function group name must be four characters long and must begin with Y or Z.
5.Type an S in the Application field. This field is used to indicate which function area uses the function module. Our functionality is not used by any functional area, it is simply an example, so any choice will do. (S indicates that the function module contains functionality needed by Basis.)
6.Type a description of the function module in the Short Text field. The contents of this field are seen when displaying a list of function modules.
Press the Save button on the Application toolbar.
7.If the function group does not already exist, a pop-up informs you of that fact and asks you if you want to create it. Press the Yes button to create the function group. The Create Function Group dialog box appears. Type a description in the Short Text field and press the Save button. The Create Object Catalog Entry screen appears. Press the Local Object button. You are returned to the Function Module Change: Administration screen.
8.Press the Source Code button on the Application toolbar. The Function Module Edit screen is displayed.
9.Type the source code for your function module. Do not change the system-generated comment lines under any circumstances! Your function module might fail to operate if you do.
10.Press the Save button on the Application toolbar. The message Program xxxxx saved appears in the status bar at the bottom of the window.
11.Press the Back button on the Application toolbar. You are returned to the Function Library Initial screen.
12.If you want to define import or export parameters, select the Import/Export Parameter Interface radio button. Press the Change pushbutton. You are shown the Import/Export Parameters screen (refer to Figure 19.6). Type the names of your parameters in the first column and enter any other desired characteristics for each parameter. When you are finished, press the Save button and then the Back button.
13.Finally, to activate your function module, press the Activate button on the Application toolbar of the Function Library Initial Screen.
http://www.erpgenie.com/abap/bapi/example.htm

I need to create RFC function module which creates the IDOC

Hi-
Any idea how to create RFC function module which creates the outbound IDOC. If you have any sample code please forward to me.
Thanks,
Sony

My Problem is
Whenever they create Invoice using T-code's like FV65(Parked Document), automatically should create IDOC's...
I have used message type FIDCC1 but this message type is usefull only for Posting documents.
1. Whenever they create parked document, entries will be stored in BKPF(Parked Document-Filed-BKPF-BSTAT = 'V') and Bseg....
2. I have to read entries from those tables and should create IDOC...
3. I checked FM's(FI_IDOC_CREATE_FIDCC1, FI_IDOC_PREPARE) but are not useful...
4. Now I need to write one RFC function module and that FM should create the IDOC's....
Can anyone please help me out?
Thanks,
Sony

WHAT ARE THE UPDATED FUNCTION MODULES

Hi Friends,
Can anybody explain me about UPDATED FUNCTION MODULES (types of function modules)

Hi
Update Function Module
Unlike transactions and executable programs, dialog modules do not start a new SAP LUW. Calls to update-task function modules from a dialog module use the same update key as the ones in the calling program. The result is that calls to update function modules from a dialog module are executed only if a COMMIT WORK statement occurs in the calling program.
If you place a COMMIT WORK in a dialog module, it does commit changes to the database (for example, with UPDATE).However, it does not start the update task. The function modules are not actually executed until a COMMIT WORK statement occurs in the calling program.
If you use dialog modules, try to avoid including calls to update function modules in subroutines called with PERFORM ON COMMIT. In general, any occurrence of PERFORM ON COMMIT(with or without update-task function calls) in a dialog module can be problematic.
This is because dialog modules have their own roll area, which disappears when the module finishes. Consequently, all local data (including data used for parameter values when calling an update function module) disappears as soon as the commit in the main program is reached.
If you must use this method in a dialog module (i.e. include the call to an update-task function in a subroutine), you must ensure that the values of the actual parameters still exist when the update-task function actually runs. To do this, you can store the required values with EXPORT TO MEMORY and then import them back into the main program (IMPORT FROM MEMORY) before the COMMIT WORK statement
Creating Update Function Modules
To create a function module, you first need to start the Function Builder. Choose Tools ® ABAP Workbench, Function Builder. For more information about creating function modules, refer to the ABAP Workbench Tools documentation.
To be able to call a function module in an update work process, you must flag it in the Function Builder. When you create the function module, set the Process Type attribute to one of the following values:
Update with immediate start
Set this option for high priority ("V1") functions that run in a shared (SAP LUW). These functions can be restarted by the update task in case of errors.
Update w. imm. start, no restart
Set this option for high priority ("V1") functions that run in a shared (SAP LUW). These functions may not be restarted by the update task.
Update with delayed start
Set this option for low priority ("V2") functions that run in their own update transactions. These functions can be restarted by the update task in case of errors.
To display the attributes screen in the Function Builder, choose Goto ® Administration.
Defining the Interface
Function modules that run in the update task have a limited interface:
Result parameters or exceptions are not allowed since update-task function modules cannot report on their results.
You must specify input parameters and tables with reference fields or reference structures defined in the ABAP Dictionary.
http://help.sap.com/saphelp_nw70/helpdata/en/41/7af4daa79e11d1950f0000e82de14a/frameset.htm
Regards,
Harish

Update Function module - How to provide detailed messages in case of errors

Hello everyone,
I am using update function modules. When there is a error, the Message i provide goes to inbox and i get a express message.
I am looking for ways to provide detailed messages (multiple lines) and i also need to add the error message returned by the BAPI
Providing a long text for the MESSAGE also does not work.
How can i achieve this ?
Thanks

Hi,
The express message is because the update functions executes in background.
You can view the detail messages of updates [Error Information from Update Management|http://help.sap.com/saphelp_nw04/helpdata/en/e5/de874735cd11d3acb00000e83539c3/content.htm]
For your requirement have alook at [Application Log and Application-Specific Error Tables|http://help.sap.com/saphelp_nw04/helpdata/en/a5/3ec9f74ac011d1894e0000e829fbbd/content.htm]
There are some functions avaibale for this and is mentioned in the document.
Keshav

How to exit from an update Function Module

Hi Friends,
I am using an Update Function Module in my program.The Program also has various other logics implemented in it. The Update Function Module gets triggered only when it finds COMMIT WORK statement. Now, I want that when the FM gets triggered and inside it, sy-subrc <> 0 at any stage, it should exit the complete processing and come to my main screen.
I tried to use Exit, STOP commands in the FM, but they only make the processing to exit from the FM.
Please suggest what shud I do.
Helpful suggestions will be surely rewarded.
Thanks in advance.
Regards,
Himanshu

hi hemansu,
after coming out from function module check value of sy-subrc
and
if sy-subrc ne 0
exit. or leave to screen 0 [module pool progarm] or stop.
endif.
if helpful reward some points.
with regards,
suresh babu aluri.

How to call a function module in VC

Hi,
I want to call a function module for an addition formula which shall calculate and infer the value.
eg. quantities of 5 different characteristics (of numeric data) is to be summed up and inferred against the 6th characteristic.
I want to know the detailed process to create a Variant Function and use it in a dependency.
Request to please advise the steps, type of dependency and its code.
Regards,
Rajesh Mohapatra

Dear Rajesh,
I also wanted to learn how to do that, your post motivated me to use a bit of freetime and investigate on the subject. I finally made my function work, so here are the tips.
The example is very simple, just a variant function with two inputs and which multiplies inside the input values and transfer that result to the output ( 3 x 4 => 12 ).
Deducting how to add five values or any other logic would be easier starting from there.
STEP 1: Create Variant Class for the product. I imagine you already have that. In my case its name is ZVC_CLASS, you have already a material assigned to the class, a configuration profile, etc....
STEP 2: Create Three Characteristics Z_NUM_CH_1,Z_NUM_CH_2,Z_NUM_CH_3 the three of numeric type
STEP 3: Assign characteristics from step 2 into class ZVC_CLASS
STEP 4: Create the function module with the code given below. I put the name ZVC_FUN_TEST
FUNCTION ZVC_FUN_TEST.
""Interfase local
*" IMPORTING
*"     REFERENCE(GLOBALS) TYPE CUOV_00
*" TABLES
*"      QUERY STRUCTURE CUOV_01
*"      MATCH STRUCTURE CUOV_01
*" EXCEPTIONS
*"      FAIL
*"      INTERNAL_ERROR
*- Inicializar los valores.
DATA:
GV_VALOR_FINAL        TYPE CUOV_01-ATFLV,
GV_VALOR_NUM1         TYPE CUOV_01-ATFLV,
GV_VALOR_NUM2         TYPE CUOV_01-ATFLV.
CLEAR:
    gv_valor_final,
    gv_valor_num1,
    gv_valor_num2.
CALL FUNCTION 'CUOV_GET_FUNCTION_ARGUMENT'
    EXPORTING
      ARGUMENT            = 'Z_NUM_CH_1'
    IMPORTING
     VTYPE               = P_VTYPE1
     SYM_VAL             = P_VALOR_SYM1
      NUM_VAL             = gv_valor_num1
IO_FLAG             =
    TABLES
      QUERY               = QUERY
    EXCEPTIONS
      ARG_NOT_FOUND       = 01.
IF SY-SUBRC <> 0.
    RAISE INTERNAL_ERROR.
ENDIF.
CALL FUNCTION 'CUOV_GET_FUNCTION_ARGUMENT'
    EXPORTING
      ARGUMENT            = 'Z_NUM_CH_2'
    IMPORTING
     VTYPE               = P_VTYPE1
     SYM_VAL             = P_VALOR_SYM1
      NUM_VAL             = gv_valor_num2
IO_FLAG             =
    TABLES
      QUERY               = QUERY
    EXCEPTIONS
      ARG_NOT_FOUND       = 01.
IF SY-SUBRC <> 0.
    RAISE INTERNAL_ERROR.
ENDIF.
*- Calculate final value
gv_valor_final = gv_valor_num1 * gv_valor_num2.          "Especifico de c/u.
DATA: VTYPE TYPE CUOV_01-ATFOR.
VTYPE = 'NUM'.
CALL FUNCTION 'CUOV_SET_FUNCTION_ARGUMENT'
    EXPORTING
      ARGUMENT                = 'Z_NUM_CH_3'
      VTYPE                   = VTYPE
      NUM_VAL                 = gv_valor_final
    TABLES
      MATCH                   = MATCH
    EXCEPTIONS
      EXISTING_VALUE_REPLACED = 01.
IF SY-SUBRC <> 0.
    RAISE INTERNAL_ERROR.
ENDIF.
ENDFUNCTION.
STEP 5: Activate the function module for Variant Configuration in transaction CU65, put there your function module, release int and in button characteristics write Z_NUM_CH_1,Z_NUM_CH_2,Z_NUM_CH_3. Flag the first two lines as they are inputs.
STEP 6: Create a Dependency ZVC_PROC_TEST of type Procedure to call the function with this code:
000010 Function ZVC_FUN_TEST
000020 (Z_NUM_CH_1 = $root.Z_NUM_CH_1,
000030 Z_NUM_CH_2 = $root.Z_NUM_CH_2,
000040 Z_NUM_CH_3 = $self.Z_NUM_CH_3)
STEP 7: Lets say I want to calculate the multiplication only upon the selection of another characteristic "Calculate" YES/NO. For this I create a characteristic in CT04 Z_CALCULATE type CHAR 1 with possible values Y or N. For the value Y y add the procedure ZVC_PROC_TEST so that formula only activates on Y.
STEP 8: Add characteristic Z_CALCULATE to class ZVC_CLASS
STEP 9: VA01, it should work

How two create UPDATE FUNCTION MODULE

Similar Messages

Maybe you are looking for