How we can configured the customised workflow in BPM

hi
can any body guide how the customised workflow can be configure in the server
thanks
Roopesh

An another possibility is to do the opposite to what I just wrote. Upload the true definition to the database an compare with the one you are not sure about via SQL:
1. Backup the WFT file where the standard/seeded workflow is provided
2. Edit it and change the name of the ITEM_TYPE. For instance, change it from OEOL to OEOL_TMP (cannot exceed 8 characters)
3. Upload it to the database with WFLOAD
4. Compare the design tables for the two if them (WF_ITEM_TYPES, WF_ACTIVITIES, WF_MESSAGES, WF_PROCESS_ACTIVITIES, WF_ITEM_ATTRIBUTES, etc). If the table provides a VERSION column then the query would need to use a WHERE END_DATE is null (so that you get only the active/current version of the object). A select... MINUM select would do the job.
I would do this in test though, to avoid a mistake can cause any issues.
Regards,
Alejandro
Edited by: Alejandro Sosa on Feb 4, 2013 7:07 AM

Similar Messages

How we can assign the customised selection screen to report category

hai
gurus
how we can assign the customised selection screen to report category

Hi Naresh,
You can do like this.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME.
SELECT-OPTIONS: S_FKART FOR VBRK-FKART.
SELECT-OPTIONS: S_FKDAT FOR VBRK-FKDAT OBLIGATORY.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
SELECT-OPTIONS: S_AUART FOR VBAK-AUART.
SELECTION-SCREEN END OF BLOCK SELECTION.
SELECTION-SCREEN END OF BLOCK B1.
if you give me brief i can help you out more.
Thank you .
Regards
Ram

How i can configure the time of response between two APs if one of they "fail" for the reconnection for customers?

Hi
I whis to know how i can configure the WLC (2500) for reduce the time of responce between Two Lightweight APs (1040 and 1602) if one of they are disconnected for any reason (energy, malfunction, etc.) for the reconnection of the clients.
I realized the next test: I have 2 APs connected, connect my laptop to the AP 1602 and start to making a TFTP transfer between my laptop and a server, then disconnect the AP 1602 and showing the laptop, the laptop makes the change to AP 1040, but the connection to the service, the TFTP transfer is cut because it takes about 30 seconds to resume the connection with the network
How i can reduce this time, because my clients want their connection is not lost when passing a situation similar, i look in the pages of cisco but did not find any information pudisese help me, any help is welcome.
thank you very much in advance
Jonathan

Not much you can do as its up to the client card to know it has no network connectivity and then to try to associate and obtain a DHCP address again. This is client dependent.
Sent from Cisco Technical Support iPhone App

How we can find the customized workflow in Oracle Apps 11.5.10.2

Hi all,
I am new to Oracle Workflow and I want to know, How many customized workflow is running in my oracle apps 11.5.10.2.
Thanks & Regards
Rakesh Kumar

An another possibility is to do the opposite to what I just wrote. Upload the true definition to the database an compare with the one you are not sure about via SQL:
1. Backup the WFT file where the standard/seeded workflow is provided
2. Edit it and change the name of the ITEM_TYPE. For instance, change it from OEOL to OEOL_TMP (cannot exceed 8 characters)
3. Upload it to the database with WFLOAD
4. Compare the design tables for the two if them (WF_ITEM_TYPES, WF_ACTIVITIES, WF_MESSAGES, WF_PROCESS_ACTIVITIES, WF_ITEM_ATTRIBUTES, etc). If the table provides a VERSION column then the query would need to use a WHERE END_DATE is null (so that you get only the active/current version of the object). A select... MINUM select would do the job.
I would do this in test though, to avoid a mistake can cause any issues.
Regards,
Alejandro
Edited by: Alejandro Sosa on Feb 4, 2013 7:07 AM

How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How we can configure new pricing procedure at the time of billing document

Hi SD Gurus,
Can u plz tell me how we can configure new pricing procedure at the time of billing document level.
Thanks & Regards,
Sreenivas.P

Hello,
Why?
The sales order confirms the price given to the customer. If you have re-determined a new price/discount then you may consider in VTFL to use pricing type C.
Regards
Waza

How do you configure the DAM so it can be shared across multiple CQ instances?

How do you configure the DAM so it can be shared across multiple CQ instances?

You can use shared datastore http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/HowToCombineTheDatastoreToP reserveDiskSpace.html multiple CQ instance will use same file system to share asset
clustering http://dev.day.com/docs/en/crx/current/administering/cluster.html multiple node will share repository.
But you can not have something like one DAM and then have different CQ instance pointing to it (As not everything goes in to one location in file system)
Yogesh

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

See Terence Devlin's thorough explanation here.

Fedora 13: After upgrading from FF3.6 to FF6.0.2 I no longer have a Java plugin. How do I configure the Java Plugin for FF 6 ? There is no Java Plugin at the site

I am Fedora 13x64 bit. I just installed FF v6.0.2 from the FF download site. I backed up the existing FF 3.6 as firefox_old
I need to have a Java plugin to access company site, how do I configure the Java Plugin ?
At the Plugin area in FF6 there is no Java Plugin available, even after a search.
I have Java 1.6.0 installed in the OS at:
/usr/lib/jvm/java-1.6.0/jre/lib/amd64/libnpjp2.so
I googled how to configure Java Plugin for FF 6 for Fedora 13 and the trick was to create a soft link from /home/<userID>/.mozilla/plugins to the above libnpjp2.so

AVtech wrote:
. . . If a person can't get an answer here I don't know where else to turn since Sun certainly wouldn't offer tech support for a free product . . .These forums are user forums, and only occasionally visited by Sun employees. Sun does provide Java technical support options, although (of course) at a charge.
See:
http://developers.sun.com/services/
. . . I guess we'll just use JRE 5 until it's unsupported, whenever that will be. I'm still waiting for an answer on that question, too. See:
http://java.sun.com/products/archive/eol.policy.html
http://www.sun.com/service/eosl/
This document (part IV and Appendix) has some debugging and troubleshooting information that may allow someone involved in the problem to resolve the cause:
See:
http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/contents.htm
Any steps that you can take to isolate the problem to specific Java versions, browsers, applets, web sites, operating systems (and versions), etc, would enhance the possibility of getting help.
You can try the applets at this Sun location and see if any of them are "slow".
See:
http://java.sun.com/javase/6/docs/technotes/samples/demos.html

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

I am unable to use my own network with my iphone for wi-fi.The message says "unable to join the network (my network). How do I configure the info in the phone to allow me access?

How do I configure the setting in my iphone to allow me use of my own network?

Thanks for the responses, they have been very illuminating!
This is very disappointing from The Carphone Warehouse. If they had mentioned this when I went into their stores, I wouldn't have completed the purchases. I bought two phones at separate outlets and neither of them told me this.
I have been in contact with T-Mobile already as I thought they had sneakily applied a software update that locked the phone. They have denied locking it and suggest that it is something that Apple do. Their solution was a factory reset.
I have a call logged with Apple this afternoon, so will see what they suggest. Hopefully they will give me something that I can take to The Carphone Warehouse or T-Mobile.

How we can give the confirmation of the sales order to the customer.?

how we can give the confirmation of the sales order to the customer.?
after the we generate thge sales order how we will give the confirmation to the customer automatically or in any way in SAP SD

A confirmation can be given to the Sold to party for the sales order by means of an output type, which is the most used functionality.
You can create an output which can be a word or PDF document, or an email , fax etc. Based on the kind of confirmation you want to give (Document, email, fax) do corresponding settings in the output for printers, email settings, fax settings etc. and enable this output to be triggered during sales order creation by assigning the output to output procedure for sales documents. This part of configuring an output is done by Functional team while the email, fax settings are done by basis team in combination with tech team.
The output should have a smartform and corresponding report program to populate the smartform. This part should be taken care of by the technical team.
Once all these things are done, if a sales order is created, the output will be triggered which will send a confirmation document, email , fax as per the configuration to the sold to party. If you want the confirmation to be send to more partner functions, that is also configurable in the output configuration.
Pls reward points if it helps.

How i can generat the ".top" file at ultiboard

Hello
how i can generat the files of our pcb design like " .top " file to use it for making our bourd by the machine

I assume you are talking about exporting gerber files and NC drill files. Go to File >> Export and you can select one of the options...
a) Select one of the Gerber RS274 options, then click Properties, here you can select which layer you want to export. Based on your comments, you are looking for probably Copper Top, Copper Bottom... but maybe you may want to export also the Board Outline, Silkscreen Top and Bottom, etc. It will depend on your board manufacturer which files they need. On you have configured which layers to export, then click OK and you are back to the Export dialog, now click the Export button and it will start exporting.
b) For the .drl and .rep files, in the same Export dialog, select NC Drill, you can then select Properties to configure it, or Export to create the files.
Nestor
National Instruments

How do I configure the number of connection in the pool for webservice axis

Hi
How do I configure the number of connection in the pool using xml.
We are using axis 1.4 and commons-httpclient-3.0.1Is there any way we can do it using the client-config.wsdd file.
We do not want to do any modification in the code for this.
Is it possible to set socket timeout also in the wsdd file.
Your resolution will be really helpful for us.
Thank You
Ottran

Export them at a smaller size:
File -> Export - not the options at 'Size'
Regards
TD

How do you configure the ADC on RIO7833R for differential inputs?

I use the 7833 RIO board; my signal source is a differential signal.
According to the documentation I can configure the inputs to be differential using software, but I have not been able to find any instructions on how to do this. Can anyone point me to a way to achieve this?
There is the obvious "braindead" method of putting the positive signal into AI0+, and the negative signal into AI1+, then subtracting - but that would only allow me to use 4 inputs, not all 8. And it would probably increase the noise due to ADC nonlinearity. The diagrams show a MUX, I just can't seem to find a way to configure it and the default mode appears to be single-ended.
Thanks a lot for any information!
Floris HJ.

That's great help, thanks Prashanth. It answers the question which I asked, not the one I wanted answered. So now the 64 thousand dollar question (from the days when that was still a lot of money):
Can you do the same thing from software? In other words, could I set up my VI so it can change input mode in response to a user input or other external condition, and that doesn't require a user navigating to the project explorer? It would appear that there is some direct access of flash memory going on. If we know the address, could we poke that register directly (perhaps from the FPGA code itself - obviously we'd then have to signal from the host VI to the FPGA code but I know how to do that).
Thanks in advance for any help.
Floris

How we can configured the customised workflow in BPM

Similar Messages

Maybe you are looking for