How yo use SQL Query in XSLFO

Hi Guys,
I am customizing the PO Standard XSLFO file is there a way to execute a sql query in XSLFO ?
Thanks
Tom...

Here you go.. Patch 4670662

Similar Messages

How to use sql query in java ?

i don't know how to use sql query in java code.
who can give me some advice?
thanks

http://java.sun.com/developer/onlineTraining/Database/JDBC20Intro/

How to Use SQL Query having IN Clause With DB Adapter

Hi,
I am using 11.1.1.5 want to find out how to Use SQL Query having IN Clause With DB Adapter. I want to pass the IN values dynamically. Any ideas.
Thanks

invoke a stored procedure, it's safer than trying to put together an arbitrary SQL statement in the JCA adapter

How to use SQL Query in OBIEE Reports

Hi all,
I need to use direct sql query in report function column.. How can I implement that.
For example
Our report name is /shared/Automotive/Vehicle Services/Most Serviced Vehicle Models
we have to eliminate /shared/Automotive/Vehicle Services/ part from above report name.. I have done this in sql using the Query SUBSTR(COL,INSTR(COL,'/',1,4)+1).
So kindly help how to implement above sql query in Obiee.. Urgent.
Thanx in advance

796797 wrote:
Hi all,
I need to use direct sql query in report function column.. How can I implement that.
For example
Our report name is /shared/Automotive/Vehicle Services/Most Serviced Vehicle Models
we have to eliminate /shared/Automotive/Vehicle Services/ part from above report name.. I have done this in sql using the Query SUBSTR(COL,INSTR(COL,'/',1,4)+1).
So kindly help how to implement above sql query in Obiee.. Urgent.
Thanx in advanceArrggh. I wish people wouldn't just answer a question without taking the time to actually think about what the user is asking for and if it makes sense. I like Diney's response best: Why not use the Title View? (i.e., asking questions until it is clear what is needed.) So along those lines, why are you trying to put the name of your report in a column of your report?? And why do you need to use direct sql to do this??
Kindly or not, urgent or not, state what you are trying to achieve and why you need it (if the obvious answer like "using the Title View" doesn't work for you), instead of simply assuming your method is right and you need to know how to do what envision. Your method may not be correct or necessary.

How to use SQL Query from VC

Hi all, with the adoption of SQ01 transaction, now I've a SQL Query defined in SAP R/3 system.
How to use it with Visual Composer 7.0 SP14 ?
Thanks in advance
Gianfranco

Hi ,
It is simple to use quiery in Vc.
Go for Find data control in Right side of V.C .
Enter System name:The system used for your quiery i.e R3 (Before u should mapp the R3 alias to the VC user in portal)
Look for :Look for service by name.
Service :Ur quiery
Regards,
Govindu

How to use SQL query result in DOS commands

Hi
Currently i am runnig below DOS commands manually
d:\apps\bin>TrueGridsCalc period="Aug 2010"
Now I want to write one batch file and schedule job on windows and make value of "period" to be dynamic. So to get that value i need to fetch it from DB
Steps which i am taking are
1. connect DB from command line (using SQLPLUS)
2. run query to fetch result
3.How to use query result in "period" parameter ?
I am good at step 1 and 2. Dnt know how to use query result in command to make it dynamic
Thank you
Sachin
Edited by: sachin.mali on Oct 26, 2010 4:39 PM
Edited by: sachin.mali on Oct 26, 2010 4:43 PM

sachin.mali wrote:
Hi
Currently i am runnig below DOS commands manually
d:\apps\bin>TrueGridsCalc period="Aug 2010"
Now I want to write one batch file and schedule job on windows and make value of "period" to be dynamic. So to get that value i need to fetch it from DB
Steps which i am taking are
1. connect DB from command line (using SQLPLUS)
2. run query to fetch result
3.How to use query result in "period" parameter ?
I am good at step 1 and 2. Dnt know how to use query result in command to make it dynamic
Thank you
Sachin
Edited by: sachin.mali on Oct 26, 2010 4:39 PM
Edited by: sachin.mali on Oct 26, 2010 4:43 PMYOu'll have to have sqlplus spool the output to a file, then figure out some way of parsing that file. Too bad you're stuck with Windows. With any *nix you could do the file parsing with one line of code.

How to use sql:query/ tag to retrive the system date?

hi all,
i want to know if i can use the <sql:query/> tag in jstl to get the database server time. please send me a code snippet to retrive n display the result. i'm new to jstl tags. please help.
thank you,
AM

Check out the first hits: http://www.google.com/search?q=jstl+sql+tutorial+site:sun.com

How to use SQL query in ADF

Hi Team,
I want to fire one sql query to retrive some data. I cant make VO of that query as its from many DB link.
Query is like SELECT query.
Can anyone suggest me
My Jdev :- 11.1.1.6.0
Thanks In Advance
Ramit

I mean to say that the query is made by one or more than one schema .
something like this:-
Select hcsua.location , msib.description,
hl.address1,hl.address2,hl.city,hl.state, hl.postal_code,hl.country, xmnd.part_number
from hz_party_sites hps, hz_cust_acct_sites_all hcasa, hz_cust_site_uses_all hcsua, hz_locations hl, xxnin_moca_nmi_display xmnd, mtl_system_items_b msib
Where hps.party_id = 176220
And hps.party_site_id=hcasa.party_site_id
And hcasa.cust_acct_site_id=hcsua.cust_acct_site_id
And hcsua.site_use_code='SHIP_TO'
And hps.location_id=hl.location_id
and hcsua.location=xmnd.location_acct_num
and msib.segment1=xmnd.part_number;
when I am making SQL VO then its saying cant make attribute of this query.
Please guide me on this.

How to get tax break up of TDS using SQL query ?

Hi all,
We are developing a TDS report using SQL query
Report will contain VendorCode,Date(ap inv date),Vendor name,
Bill value,TDS Amount,
Bill Value 100.000,
TDS (2%) - 2.000,
TDS Surcharge(10% on TDS) - 0.2,
TDS Cess(2%(TDS+TDS Surcharge)) - 0.044,
TDS HeCess(1%(TDS+TDS Surcharge)) - 0.022.
We have developed this report which displays upto
VendorCode,Date(ap inv date),Vendor name,
Bill value,TDS Amount.
How to show tax break up of TDS in SQL query ?
Thanks,
With regards,
Jeyakanthan.

Hi gauraw,
Thank for your reply.
I modified the query , pasted the query
as below in query generator,
Select T0.DocNum,T0.DocDate,T0.CardCode as 'Ledger',T1.TaxbleAmnt As 'Bill value',T1.WTAmnt as 'TDSAmt',(TDSAmt * 0.1) as 'TDS_Surch',
(((TDSAmt0.1) + TDSAmt)0.02) as 'TDSCess',
(((TDSAmt0.1) + TDSAmt)0.01) as 'TDSHCess'
FROM OPCH T0 INNER JOIN PCH5 T1 ON T0.DocEntry = T1.AbsEntry
WHERE (T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]')
on clicking execute its showing error message invalid column
name 'TDSAmt'.
With regards,
Jeyakanthan

How do i get the approximate size of back up file required to save on disk using sql query because i want to show the required sapce for backup on my application

hi i am face with problem that is i want to show the how much approximate space required for backup or .bak file to get backup using sql query because i want to show the required memory for backup file on my java application

Hi FIROZ
TENNALI
Is this still an issue, or can we close the thread?
* closing a thread by marking the answer/s (there is a link beneath each response) and you can vote for useful responses as well (there is a link to vote on the left of each response)
Ronen Ariely
[Personal Site] [Blog] [Facebook]

How to execute SQL Query in Code behind Using infopath 2010?

Hi,
I've repeatable on infopath form, and want bind it throuth code behind from SQL table. My question is that how to execute SQL Query in code behind from infopath as well as how would get Query result to bind repeatable control?
Thanks In Advance
Shoeb Ahmad

Hello,
You first need to add new SQL DB connection then you need execute connection from code behind.
See below link to create new connection
http://office.microsoft.com/en-in/infopath-help/add-a-data-connection-to-a-microsoft-sql-server-database-HP010092823.aspx:
http://www.bizsupportonline.net/infopath2010/connect-infopath-2010-sql-server-2008-table.htm
Then use below code to execute this connection:
AdoQueryConnection conn = (AdoQueryConnection)(this.DataConnections["Data connection name"]);
string origCommand = Select * from tablename;
conn.Command = origCommand;
conn.Execute();
Finally bind your table:
http://www.bizsupportonline.net/infopath2007/4-way-programmatically-add-row-repeating-table.htm
http://stevemannspath.blogspot.in/2010/09/infopath-20072010-populate-repeating.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to numberformat when using sql:query alogn with c:forEach JSTL tags

Is there anyway to format the numeric values returned from the database when using <sql:query> alogn with <c:forEach> tags
Here is my jsp code
<sql:query..../>
<c:forEach var="row" items="${queryResults.rows}">
<tr>
<td><c:out value="${row.COL1}" /></td>
<td><c:out value="${row.COL2}" /></td>
</tr>
</c:forEach>
Col1 values are numeric without any formats Eg: 1000, 10000, 1000000 etc.
how can i format them to 1,000 , 10,1000 , 100,000 etc

It is polite to mention what your answer was. These posts are not just here for you to ask questions, but to be used as a resource for other people to find answers. Saying "I solved it" with no details helps noone.
I presume you discovered the JSTL <fmt:formatNumber> tag?

How to backup database using sql query?

Hello,i'm student, i'm researching oracle database,i want to backup database that using sql query (like backup query in SQL SERVER) ,how to do that ??
Thank!

No, database backups cannot be done from within the database.
Commands for backups are outside of the database.
See the "2 Day DBA Guide" http://download.oracle.com/docs/cd/E11882_01/server.112/e10897/toc.htm
and the "Backup and Recovery Users's (actually Adminsitrator's) Guide : http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/toc.htm
Hemant K Chitale

How to get this output using sql query?

Hi,
How to get this output using sql query?
Sno Name Age ADD Result
1 Anil 23 delhi Pass
2 Shruti 25 bangalor Pass
3 Arun 21 delhi fail
4 Sonu 23 pune Pass
5 Roji 26 hydrabad fail
6 Anil 28 delhi pass
Output
Sno Name Age ADD Result
1 Anil 23 delhi pass
28 delhi pass

Hi Vamshi,
Your query is not pretty clear.
write the select query using Name = 'ANIL' in where condition and display the ouput using Control-break statements.
Regards,
Kannan

How to hide repeated details using SQL Query?

How to hide repeated details using SQL Query?
For Ex:
------------------------+
DEPTNO| ENAME | JOB |
------|-------| --------|
10 | JAMES | MANAGER |
10 | BLAKE | CLERK |
10 | FORD | SALESMAN|
20 | SCOTT | MANAGER |
20 | ADAMS | CLERK |
20 | KING | SALESMAN|
------------------------+
How we can display the above details in the following way?
------------------------+
DEPTNO| ENAME | JOB |
------|-------| --------|
10 | JAMES | MANAGER |
| BLAKE | CLERK |
| FORD | SALESMAN|
20 | SCOTT | MANAGER |
| ADAMS | CLERK |
| KING | SALESMAN|
------------------------+
Thanks Advance

Hi,
you can use BREAK ON DEPTNO in SQL*Plus or use LAG.
SQL> ed
Wrote file afiedt.buf
1 select nullif(department_id
2                , lag(department_id) over (partition by department_id order by last_name)
3         ) dept_id
4 , last_name, job_id
5* from employees where department_id in (30,50) and rownum <=10
SQL> /
   DEPT_ID LAST_NAME                 JOB_ID
        30 Baida                     PU_CLERK
           Colmenares                PU_CLERK
           Himuro                    PU_CLERK
           Khoo                      PU_CLERK
           Raphaely                  PU_MAN
           Tobias                    PU_CLERK
        50 Fripp                     ST_MAN
           Kaufling                  ST_MAN
           Vollman                   ST_MAN
           Weiss                     ST_MAN
10 rows selected.

How yo use SQL Query in XSLFO

Similar Messages

Maybe you are looking for