Howto: Make Edge Sharpen etc. part of the default HUD

Hi all,
To make the new Edge Sharpen control part of the standard HUD:
0) Quit Aperture
1) Go to Library/Application Support/Aperture
2) Copy the file AdjustmentsDefaults.plist to a safe location
3) Open the original AdjustmentsDefaults.plist file by double clicking it. This should launch the Property List Editor with the file loaded
4) Unfold the Properties List nodes
5) Select the last entry in the plist (the one named 5)
6) Click on "New Sibling" in the toolbar
7) Enter RKProSharpenOperation as the value
8) Quit Property List Editor
9) Restart Aperture and enjoy your customized HUD!
Other operations that appear to work are
RKRedEyeOperation (Red Eye)
RKStraightenCropOperation (Straighten)
RKCropOperation (Crop)
RKDustRemovalOperation (Spot and Patch)
RKChannelMixerOperation (Monochrome Mixer)
RKNoiseReductionOperation (Noise Reduction)
RKSharpenOperation (Sharpen)
Sepia and Color Monochrome seem to be handled by parameterized versions of RKImageOperation and I haven't experimented with adding these.
As always; perform experiments like this with care!
Kind regards

that one is already a default ... at least it was for
me after upgrading to 1.5 ...
maybe someone who has the plist in front of them can
give the exact, or else i will when i get home ...
My face is FF0000!! You are right, it is there. I don't believe it was before 1.5 and I missed it.
Thanks!

Similar Messages

Making White Balance, Sharpen, ect. part of the default HUD

Greetings,
I would like to add the sharpen, white balance, color correction and others set to be a part of the default HUD. I found this post here: http://discussions.apple.com/thread.jspa?threadID=674833&tstart=0
but it does not seem to work for version 2.1 (the version I have). I say this because I do not have the file AdjustmentsDefaults.plist in my Library/Application Support/Aperture.
I tried to look within my profile and within the main Library.
How can I do this? Thanks.

Hey,
It's much easier in 2.1.
In Aperture open The Adjustments HUD.
Click and Add '+' button and select edge sharpen to add the edge sharpen brick to your HUD (or any other you should choose).
On the edge sharpen brick itself click the action button (the picture of the cog wheel).
Choose 'add to default set'.
You should be sorted.
Hope this helps.
M.

How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

Hi Eric,
I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
I used a 2 element array going into a four loop
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
Defining the working director C:\altera\12.1sp1\qprogrammer\bin
And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
Thanks for the interest though
Best regards John

I want ro remove all of the default Firefox bookmarks. There are way too many and none of which are usefull to me. I would like to make my old IE Favorites folder the default. How can I do this?

I need to remove the default Firefox bookmarks.
There are way too many and none of which are usefull to me.
Also, I am vision impaired and reading through such a long list is very eye-fatigueing to me.
I would like to make my old IE Favorites folder the default. How can I do this?

Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

Dynamic internal table ( make one internal table parts of the record )

hello i am doing a program that look for document billing put it in a internal table then loop the internal table and use the FM SD_DOCUMENT_FLOW_GET for get the document flow that fm return a table and i need make every record of that table part of the currect register , i already do this in a ugly static way but i am looking a dynamic way of do this , i know that the ABAP OO is the way but i am no able to get this approarch ( i am noob in abap and any experience with OO programing )
i will show the code for better understanding of it
pd: is a crappy code i know sorry
[CLick Here for the see the Code ( pastebin )|http://linuxlatino.pastebin.com/m39120e69]

thanks all for the answer , but i will try explain better my problem :
i have a it_data interntal table with document bill record i do a loop to that table and used the vbeln field in the FM for get the docment flow of that document billing number now the output of the FM is a table and i need take each record of that table am make it part of the current record of it_Data.
Example:
it_Data without the it_docflow data
*Sales ORg*   *Distri.Channel*      *Billing Type*    *Payer*         *Sold-to-party*        vbeln*
TP01         C1                     ZT17           1000524     1000524                 85003435 ..........
it_docflow table ( FM Output ):
*DOCNUM     ITEMNU    DOCNUV    ITEMNU            Description*
53107842   000000                          000000         Standard Order
65004606   000000       53107842   000000        Outbound Delivery
75179356   000000      65004606   000000         Invoice
57000118   000000      75179356   000000        Returns
85003435   000000      57000118   000000        Credit for Returns
5200003681 000000     85003435   000000       Accounting Doc.
now the it_docflow data add in the it_data record:
53107842 Standard Order 65004606 Outbound Delivery 75179356 Invoice 57000118 Returns 85003435 Credit for Returns 5200003681 Accounting Doc   TP01         C1                     ZT17           1000524     1000524                 85003435 .........
i hope this explain better my problem here , thanks again

How do I make my new gmail email address the default when I click on "Contact us" in a site in Firefox? Thanks.

When I click on a website's "contact us" button while in Firefox, I get my old email address in my old email provider, which means that new emails in the old inbox have to be loaded first , taking a lot of time. I want to keep my old email provider for the time being as not everyone has my new addy and the old forwards to the new addy. I have Micresoft XP. How do I make my new address the default?

See the section about '''using web mail services''' at the bottom of this article.
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

How do I make my e-mail account (hotmail) the default setting

''duplicate - locking - https://support.mozilla.com/en-US/questions/830905''
cannot make attachment or links to my hotmail account, how do I make it the default setting

To make it the default account- iPad settings, mail,(under signature) default account. Select it and change it. The address book, under that account make sure you have addresses ON.

How to make a certain document open as the default in Pages?

How can I set up Pages, so that a certain document opens as the default each time I start Pages? I keep my todo list as a Pages document. When I start Pages I'd like that to open as the default instead of a new blank page. Thanks in advance.

Jim
+Menu > Pages > Preferences > General > For New Documents: > Use template: > Choose…+
or if you don't want a template, when the Chooser comes up, down the bottom corner are 2 buttons:
*Open Recent* and *Open an Existing File…*
But better would be drag the document to your Dock and open it direct from there.
I also recommend you look at:
http://www.macupdate.com/info.php/id/30061/qu-s
It is absolutely gorgeous and as part of your desk top less intrusive to your work.
Peter

Can I make opening links in new tabs the default?

I know I can open links in a new tab by right-click and choose open link in new tab. Is there a way to make this method the default choice so I don't have to right click? I use windows 7

Click using the middle button on the link.

How to make a 2nd, new Photo Library the default on open

well, we've now reached 15,000 picts on my iPhoto and you know what that means.
I read MISSING MANUAL (pogue) and now how, with option-boot up, to create a new photo library. Very cool.
HOWEVER: I wish this new library to be the default library when I open up iPHoto 5.
How do do?
JON

JON,
iPhoto opens the most recently used library by default. So all you have to do is create the new library. When you Quit iPhoto, it will be set to open that library the next time you launch. If you want to open a different library, you will have to Option-Launch to select it.
Also, you might like to check out iPhoto Library Manager. It facilitates switching among iPhoto libraries. Plus, it allows you to transfer rolls and albums between libraries while preserving the keywords, ratings, titles, and other database information.
Regards.

I'm trying to access my airport extreme to make port forwarding changes by using the default IP 10.0.1.1 but I get no login menu. Where is my login menu?

I'm trying to access my airport extreme by using IP 10.0.1.1 but I get no log in screen. Where is my login screen?

Download and install......
AirPort Utility 5.5.3 for Windows - Support - Apple.......assumes that you are running XP SP3
or
AirPort Utility 5.4.2 for Windows - Support - Apple......assumes that you running XP SP2
and
Bonjour Print Services for Windows v2.0.2 - Support - Apple
Expect the Windows Firewall to block the connection attempt between the application and the AirPort, so you will likely have to turn it off to configure the AirPort.
The anti-virus program and Microsoft Security Essentials can do the same thing.

HUD Display (edge sharpening)

I frequently use the edge sharpening controls. I would like to know if there is a way to keep these controls permanently in the HUD display, along with other frequently used controls such as exposure, contrast, white balance, etc. Unlike the regular sharpening adjustment, I have to select edge sharpening from the HUD drop down menu each time I want to use it. As soon as I move on to another image, it disappears from my HUD window. There must be a way to select frequently used adjustments in the HUD window permanently isn't there? I can't figure out how to do it. I am NOT talking about saving presets. I understand how to do that. This would be a big timesaver.

Steve- I can't thank you enough. This has been bugging me for ages. I just never got around to researching it on the discussion boards til now. I am a bit technically challenged When I opened the AdjustmentsDefaulsts.plist it was opening by default with OmniOutliner. After reading the old threads on this topic I see someone else had the same problem. I went back and opened it with Text Edit and added RKProSharpenOperation to the list and voila! Upon re-launching Aperture the edge sharpen adjustment is permanently in my HUD. To anyone else reading this, you must make sure to enter it EXACTLY the same as the other items on the list, in other words like this:
<string>RKProSharpenOperation</string> The first time I tried I left out the forward slash in the second <string> and it didn't work.

Edge Sharpening: Changes Color (?)

In playing with and testing the new edge sharpening functions, I'm finding erratic, weird behavior.
I have found, on several images, that when applying edge sharpening to an image, the color(s) appear to be affected. I guess the best way to describe it is like this: imagine you are working on a photo. Don't change anything yet. Nothing. Open full screen. Scroll the image to a portion in which a dark area or areas are visible. Ideally, you will have a part of an image that also has edges that are to be sharpened.
Now, apply edge sharpening to taste. After that, press M to view the original. In my case, I have found that the color of the dark areas change, when all I've done is add edge sharpening. Specifically, the dark areas appear to be lighter and show more detail (not sharpening detail).
Anyone else?
G5 / DP 1.8 / 4gb RAM / ATI X800 Mac OS X (10.4.7)

Yep. And rebooted, too.
And this is reproducible.
Very odd.
the funny thing is that when applying edge sharpening, the image actually improves in non-sharpened areas. Specifically, more color detail is visible in areas otherwise too dark or showing too much black contrast.
So... applying edge sharpening gives what appears to be a more accurate render of the image, where the "dark" portions now are slightly less dark, and show greater detail.
Note: calibrated monitor. Apple 23" Cinema Display.

Keep edge sharpening tool open?

Is there a way to keep the edge sharpening tool/brick open like the other adjustments. I have to use a keyboard shortcut to bring it up each time I want to use it.

with the edge sharpen brick open, click the gear icon in the upper right and choose "Add to Default Set" ...

ICal: how to make my print selections become the default

how do I make my chosen printer selections become the default? Also, is there a way to assign selections to a named type of "file", i.e, "My Calendars", "My To Dos", etc.?

If you leave a CD, DVD, or some disc with data, in the internal drive, it should then use the external drive for burning. If you use good blank discs, such as Verbatim, there should be no reason to reduce the burning speed.

Howto: Make Edge Sharpen etc. part of the default HUD

Similar Messages

Maybe you are looking for