HP CP-2025dn: "Printer is busy" error message when printing.

Hi everyone!
I'm using CUPS 1.5.3, foo2zjs and foomatic-db-foo2zjs (for my Samsung printer) and I'm trying to install a HP Color Laserjet CP2025-dn network printer. I use the CUPS web interface to do so, and everything seems to work fine. I use the ipp:// protocol (the hp:// one does not work) and use the hpijs driver for the printer. I've also tried other drivers such as the hpcups variant, and both HP CP2025n drivers.
Every time I try to print, CUPS says that the printer is busy (and processing), but I know for a fact that I'm the only one on the network sending jobs to it. Other Linux machines can print to it. If it changes anything, the black toner level is low and the printer displays a warning, but still prints on other Linux machines using older version of the hpijs and hpcups drivers.
Any idea why this happens?
Thanks!
Last edited by valandil (2012-06-28 12:46:23)

This worked for me. I have an IMAC and wife has a laptop MacPro. Epson printer connected USB to IMAC and MacPro normally prints from local router network. Could not get MacPro to print.
On MacPro repaired disk permissions.
Delete printer.
Reset print preferences. Control key and click on empty printer add/delete box and select when it appears
Shut down Mac Pro
On IMAC, disconnect printer USB cable.
Connect cable to MacPro.
Start MacPro
Dialog box asked to install Epson software. Agree.
Test print.
Shut down MacPro
Reconnect printer cable to IMAC.
Insure print sharing is turned on
Start MacPro.
Delete printer and reset printer preferences as above
Add pinter. It should now appear. Select
Turn on shared printing
Test. Worked for me.

Similar Messages

"Updater Software Busy" Error message when restoring

Hello.
My week-old 80GB classic began acting up and asked me to restore with iTunes. When connected, it promptly downloaded the 1.0.2 update. (about which I've heard so many "wonderful" things... ) Anyway, after entering my admin password, it extracts the package and attempts to restore the iPod. After a couple of minutes, however, it displays the error message:
"The iPod "iPod" could not be restored because the updater software is busy"
I've tried all the usual restarting the Mac, booting the iPod in disk mode, and resetting the iPod, but to no avail.
Oh, have just tried downloading the 1.0.1 update (downdate?) and this produces the even more worrying error that the "Firmware could not be found".
I'm sure I'm still covered by the warranty (I am, right?) But, nevertheless, if there is some fix that I haven't tried, I'd greatly appreciate any advice.
Thanks a lot,
Adam

I am trying to restore an old iPod, but when I do it says error can not be restored because updater software is busy and then....
What is the exact error message?
B-rock

Busy error message when moving videos to a new folder

I am trying to move videos from my iphoto to a folder I created on my desktop. I put them all into an iphoto album, then I selected all of them and tried to drag them over to the folder on my desktop. I got the following message:
Selected items cannot be put into same location because at least one of them named "CIMG0327.AVI" is busy.
What does this mean and how can I resolve it??

Two more thoughts:
Make sure that there isn't already a file in there with the same name
Could be a permissions issue: Download BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
Regards
TD

"The Directory Service is Busy." Error Message When Trying to Rename PCs on AD 2012 R2 Domain

As the title says, I'm trying to rename some existing PCs on a Windows 2012 R2 Active Directory domain, but I keep getting the error: The
Directory Service is Busy.
The command I am using is:
netdom renamecomputer <OLD_NAME> /newname:<NEW_NAME> /ud:DOMAIN\user /pd:* /force /reboot:300
This command works on some machines but not others. Using Powershell elicits the same response. Any troubleshooting suggestions?
(this is cross post from Powershell here: https://social.technet.microsoft.com/Forums/windowsserver/en-US/b82cc024-4c33-47a7-bfb7-85a0a03ff357/the-directory-service-is-busy-error-message-when-trying-to-rename-pcs-on-ad-2012-r2-domain?forum=winserverpowershell)

Hi,
Considering that your issue isn't really PowerShell specific I'd probably try asking this question over in the Directory Services forum:
https://social.technet.microsoft.com/Forums/en-us/home?forum=winserverDS&filter=alltypes&sort=lastpostdesc
Perhaps someone here will have some answers for you as well, but I imagine the DS forum will be your quickest route to an answer.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Error message when I try to print: unsupported document-format"application/vnd.cups-command. I recently had my hard drive replaced in my early 2010 21" iMac. Can anyone help?

Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac. Anyone know anything about this? Thanks in advance.

What system are you running? Have you tried going to the Canon website to download and install the latest drivers for that model?
Are you running Time Machine?

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

Error message when changing from portrait to landscape when printing

I receive an error message when changing from portrait to landscape when trying to print. How do I resolve this issue?

Hi hillclimbing,
Can you please let me know the exact error message you see as that would be helpful.
Does this occur with all the pdf files.
What OS and Acrobat version are you using?
Regards,
Rave

Q: Error message when printing Photoshop CS3 file

I get an error message when I try printing a CS3 photo on my Epson C86 printer, and the resulting print has the wrong colors and luminance levels.
Error Message = "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer."
Any ideas for how to work through this problem?
Thanks in advance for your help.

Chris -
Thanks for your quick response.
Do I understand you correctly in saying that Photoshop CS3 has PostScript information that it routinely sends to a printer, and therefore I would need to have a PostScript compatible printer inorder to work with this information (and also for my ColorMunki calibration to work)?
Based upon what you said, I think my color problems are because the ColorMunki profile for my printer, paper, & ink combination are being ignored.
Tom

Error message when printing, what can I do?

I keep getting error messages when I try to print a PDF. This is very frustrating! I have been trying to print tax returns from online and cant do it from this computer, which had the newer ADOBE DC. I have tried deleting and reinstalling.

"Error messages" doesn't really tell us anything.
We also don't know your operating system or browser.

Error message when printing Sales Order

Hi,
I get following error message when printing out a sales order just created.
No matching records found 'Document' (RDOC) (ODBC-2028) (Message 131-183)
Logged in as super-user, posting periods is unlocked. It is a new company just created. With sand-box company no errors-it prints properly to same printer.
What could be the problem?
Thanks,
Ajay Audich

Have you tried with system PLD?
Thanks,
Gordon

"Business Catalyst" error message when starting Dw

Hello,
Since a yesterday, I have this error message (in french) when starting Dreamweaver.
"Lors de l'exécution de onload dans BusinessCatalyst.htm, la ou les erreurs Javascript suivante ont eu lieu - Dans le fichier "Business Catalyst : bcinit is not defined".
A few days ago, I started to have some errors message when opening any page of my website.
"Les traducteurs suivants n'ont pas été chargés à cause des erreurs :
ASP.htm : dispose d'informations de configuration invalides.
ColdFusion.htm : dispose d'informations de configuration invalides.
PHP_MySQL.htm : dispose d'informations de configuration invalides."
I've open an old website, those error messages still existing.
Does anybody have an idea ?
Thanks for your help.
Hugo

BC Status
Nancy O.

Printer Error Messages When Printing PDF Documents

I keep getting the following error messages when I try to pring a PDF document. This application has failed to start because LXBBGF.DLL was not found. Reinstalling the application may fix this. The other error message is: Cannot load library LXBBPRP.DLL using default error 126. I spent over and hour with a Lexmark Tech. who unsistalled my Lexmark X75 printer and he did a register edit to make sure my register was cleared of all the old Lexmark entries. He then reistalled the printer and the drivers, but the error message still pops up when trying to print a PDF Document. He checked out the printer and it will print and scan all other types of documents with no error messages. He also had me unistall Acrobat Reader 11.0 and reinstall it. I also did a sytem restore but none of the remedies I have tried so far has fixed the error messages issues. I would like to get this problem resolved as soon as possible because I need to print my travel documents asap. This forum is great but can someone please let me know how to get in touch with Adobe Technical Support. I need their toll free phone number and email address?

Hi Pat,
When I first encountered the PDF printing problem I went to the Adobe Web Site and downloaded the most current version of Adobe Reader which was the 11.0.6 version and the Lexmark Technician uninstalled the old driver and installed the updated version of the printer's driver. But this did not resolve the PDF printing problem. Both before and after the PDF printing problem surfaced I was able to print all other document formats except PDF documents.
It seems very strange to me that once I uninstalled the Adobe Reader 11.0.6 and reinstalled my old version of Adobe Reader 9.3.3 that all of sudden I was able to print all of my other PDF documents. But that's what happened and Adobe still insists that it was a printer issue. I did a little research and this is not the first time Adobe has had compatibility/configuration issues with Lexmark printers and they have not resolved these issues.
I know I am taking a chance by using an unsupported unsecure version of Adobe Reader, but at this time I don't have any other option. Unless Adobe develops a patch/workaround solution. Which I hoping they will do, but I don't think this is going to happen soon because this issue is not a high priority as it only effects a small portion of their customer base.
Thanks For Your Input/Comments
Edd

Error message when processing in the Business Warehouse

hi everybody!!
this was the error i got.plz let me know the correction process.plz explain stepwise.
thank u,
jack.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update

Hi,
This issue is in BI when you are trying to load data from one object to other Object
example: ods to cube
We need the Log information which you can find that in the monitor screen Status tab "Push button"
Regards
Hari

Error message when running Business rules

Hello,
We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same time we got this error:
[Wed May 06 22:01:45 2009]Local/ESSBASE0///Info(1051037)
Logging out user [brlpo], active for 63 minutes
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.CurrFcst does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.Curryr does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
Would you have an idea of reason of error code?
Thierry

Hi,
Looks like the substitution variables its looking for are missing.
Can you check that?
Regards,
Amol

HP CP-2025dn: "Printer is busy" error message when printing.

Similar Messages

Maybe you are looking for