HP Officejet 6600 is not shared with the Homegroup

HP Officejet 6600 does not print from computer. Will print wireless from another device. Error message is
"HP Officejet 6600 is not shared with the Homegroup". It also give a error message on the screen that there is a problem with the device on the USB port. Have re-installed the driver several times. HELP

Hello Tonicc,
Welcome to the HP Forums.
I see that you are having an issue with sharing the printer.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Printer hp laserjet m1212nf mfp is not shared with the homegroup

Dear friends of HP
I'm using the excellent HP Printer, but everytime Iturn it on, it asks me to make a "SMART INSTALLATION" if not my PC doesn't beguin to print and the default printer stays in grey color in the Control Panel.
I'm using windows 7 Ultimate 64 bits.
I've contact a lot of times to the israeli HP support and they kindly "fix it" by uninstalling and re-installing my printer.
The next time I want to use the printer the same thing happends and asks me to make the Smart Installation.
Today I've got from Windows Troubleshot this error: "Printer HP Laser Jet Professional M1212nf MFP is not shared with the homegroup."
The printer driver installed is: "LJM 1130_M1210_MFP_Full_Solution"
Please help me to fix this troubleshot that is bothering me for more than half an year.
Yours sincerelly: uzi2003

Hi Uzi,
It seems as the HP Smart Install feature is trying to reinstall the printer upon each restart.
Try following this tool by selecting Disable to turn off Smart Install for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-129228-1&cc=us&dlc=en&lc=en...
Next reboot the PC and try printing again, as well check if any prompt appears or not.
If you still experience any printing issues, try following the HP Print and Scan Doctor below and check again:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-136595-1&cc=us&dlc=en&lc=en...
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet 6600 unable to communicate with the printer

I have a wireless network and am attempting to print from my laptop but I'm receiving the message unable to communicate to the printer.
My other devices are working computers are working fine Laptop and MS surface connect fine.
For this device I've unitsalled all HP printer devices from the system and reinstalled them.
I'm still gettting the message

Hi prajah,
Welcome to the HP Forums.
I see that you are having some connectivity issues when attempting to print from your laptop.
Try running the HP Print and Scan Doctor.
Let me know if you see any error codes or messages.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Export workbooks not sharded with the oracle Discoverer Administrator

Can anyone tell me how to export workbooks which are not shared with the discoverer administrator.
When I use the command line dis4adm.exe /connect userid/password@db /export destination / workbook "workbookname' it toes only funtion for workbooks shared with the discoverer administrator.
Any advice will be highly appreciated. Thanks

Hi Marc
The only mechanism to export Discoverer workbooks using the 4.1 Administrator tool is to use the command line.
However, there are severe restrictions on functionality. These are:
- Only the owner of a workbook can export a workbook. Discoverer administrators do not have the power to export end user workbooks, therefore user accounts need to be temporarily granted administration privileges during the process
- There is no mechanism to export “ALL” workbooks for a user account. They have to be named explicitly on the command line
- Workbooks must be exported on a user by user basis because there is no mechanism to export workbooks for multiple users at the same time
Drop me an email because I have a white paper that explains in detail how to export workbooks in 4.1 using the Administrator tool.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Spill water on my Iphone and I want to recover photos on my Ipad The pictures on the Iphone were not shared with other apple devices is it possible get my photos from the iCloud ?

spill water on my Iphone and I want to recover photos on my Ipad The pictures on the Iphone were not shared with other apple devices is it possible get my photos from the iCloud ?

Had you set your iPhone up to use Photo Stream?
Had your performed an iCloud backup of your iPhone before it was damaged?
If you did neither of the above, then your photos are not in the cloud, and they are gone.
If you performed an iCloud backup, then it would contain the photos in the iPhone's Camera Roll (taken on the iPhone) at the time of your last backup. You could restore this iCloud backup to a device.
If your iPhone used Photo Stream, those photos are immediately accessible to your iPad if you set it up to use the same Photo Stream.

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

My experience with upgrading from Snow Leopard to Lion is that the OfficeJet Pro 8500 Wireless will print just fine, although it seems to take a little longer to find the printer on the network. My scan function however locks up and will not work. This really is an annoyance, though, since I have VueScan, which works fine with Lion.
Hopefully, Apple and HP will not orphan the OS native scanning feature for HP multifunction printers.

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

Windows "Easy Connect" does not reply with the password / "Easy Connect is not Available"

Hello,
I have posted a related question some time ago, which was eventually resolved. However, after some time a problem with Easy Connect (used for MSRA) came back:
Whenever I arrive at the point in setting up a MSRA session where Easy Connect is needed, I get the reply: "Easy Connect is not Available". Here is an example of the problem:
Start MSRA
--> as expected, a window with "invite someone to help you" and " Help some who has invited you" appears
Select "invite someone to help you"
--> as expected, a window with "Who do you want to get help from" appears
Select "Invite someone to help you"
--> as expected, a windows with "How do you want to invite your trusted helper?" appears
Select "Use Easy Connect"
--> as expected, the temporary "Create invitation window / checking network capabilities" window appears
Next, I would expect this windows to close a new window to provide me with the Easy Connect password. However, instead I get the window "Easy Connect is not available".
I cannot continue. (I have screenshots so can repost with them if that would clarity my question)
Any suggestion how to resolve would be appreciated.
(Please do not reply with the 3 suggestions from the FAQ (both computers must run windows 7 / Access to internet is limited / your router does not support Easy Connect - doesn't help)
More background information and things I have tried:
The "Easy Connect is not available" window offers the "Tell me more about how to fix this problem" which I have tried, but those suggestions do not help
If I use the other MSRA option: "Help someone who has invited you" (this would be my typical use case), followed by "help someone new" and than select "Use Easy Connect", I also get the "Easy Connect is not available"
window instead of the expected option to enter the Easy Connect password. I believe this is that same problem.
This happed with both the 32 as well as the 64 MSRA versions
I'm using Window 7 Ultimate, 64 bit with all the latest updates
This desktop PC is wired to the internet via an Edimax gigabit switch, a Dlink DIR-855 wireless router and a fiber modem in bridge mode
The W7 desktop has a single active network connection only
I'm using Windows Firewall and Windows Security Essentials
Disabling the firewall on the PC did not help
Network discovery is enabled in Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings (that’s UPnP – right?)
The Internet Connectivity Evaluation Tool does not seem to be available anymore from MSFT sites
Restarting "Peer Name Resolution Protocol" did not help
Restarting "Peer Networking Identity Manager Properties" did not help
Starting up with a "Clean Boot" (disabled all non-Microsoft services using MSConfig) did not help
I would also be interested to understand how I can check on the status of the "Easy Connect" service. Is this a service hosted somewhere, or??
Thanks!

Dear Andy,
Thanks a lot for your reply. Let me answer your questions:
Q: Could you use the other methods: save this invitation as a file and use e-mail to send invitation?
A: yes, that way I can establish a MSRA connection
Q: Have you disable other network connections, including disable all virtual network card?
A: if I check with ‘Device Manager/Network Adapters’ (or Control Panel/Network and Internet/Network Connections) I see two network adapters (my Asus motherboard has two network connectors). Both are available, but only one is used. I have
disabled one. Unfortunately, this does not solve the problem. I will leave it disable for now.
Q: To find detailed information about this issue, please locate to event view and find the logs about remote assistance.
A: I have to admit that the Event Viewer is unfamiliar territory for me. So, I’m not sure where and what to look for. However, as suggested, I found "Event Viewer (local)/Applications and Services Logs/Microsoft/Windows/Remote assistance/Operational".
Each time, I attempt to use MSRA/Easy Connect, it seems two entries are added. As I cannot seem to upload files with this post, here are just the two entries:
“Diagnosis Repro Attempt resulted in a failure.”
“Remote Assistance troubleshooting has confirmed the problem: Remote Assistance Easy Connect isn't available.”
If you need more details, please suggest what to forward or check. I'm eager to find a solution!
W.

Installed ES - Error when loading adminui: Property Editor not registered with the PropertyEditorManager

I just installed LiveCycle ES on a Windows 2003 virtual machine using the WebSphere application server.
Everything is finally installed, but now when I try to access the adminui url (http://xxxxx:9080/adminui/login.faces) I receive the following exception:
Error 500: com.ibm.ws.jsp.JspCoreException: Unable to convert string 'adminUIResources' to class javax.el.ValueExpression for attribute basename: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
Am I missing something? What now?

You shouldn't have any appserver specific libraries in WEB-INF/lib (covered by the webapp's default classpath). Further on the appserver/lib (covered by the appserver's default classpath) should only contain appserver specific libraries and at highest 3rd party libraries which are going to be shared among all webapps. Finally you should NOT have added or modified anything in the jdk/lib (covered by the runtime's default classpath).
So in case of a default and unmodified environment everything should just work flawlessly. In your specific case it seems that you've unnecessarily added/copied appserver specific libraries in the WEB-INF/lib or that you have duplicated EL libraries from (another) appserver in the appserver/lib or maybe -more worse- in the jdk/lib.

Property Editor not registered with the PropertyEditorManager

I´m trying to integrate a fully working jsf 1.1 application into JBoss 4.2.2 which uses jsf 1.2 which isn´t that compatible at all.
I just have one implementation of the jsf-libs and not any in the application war.
"ERROR [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[samigo].[jsp]] Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: Unable to convert string "#{authorFrontDoorMessages.auth_front_door}" to class "javax.el.ValueExpression" for attribute "value": Property Editor not registered with the PropertyEditorManager".
And yes, i have been searching a lot on google and read a lot of the article and forum threads but i haven´t been able to solve this.
I have been struggling with this problem more than a week now, so please give me a tip on what the problem might be.
Any idea?

You shouldn't have any appserver specific libraries in WEB-INF/lib (covered by the webapp's default classpath). Further on the appserver/lib (covered by the appserver's default classpath) should only contain appserver specific libraries and at highest 3rd party libraries which are going to be shared among all webapps. Finally you should NOT have added or modified anything in the jdk/lib (covered by the runtime's default classpath).
So in case of a default and unmodified environment everything should just work flawlessly. In your specific case it seems that you've unnecessarily added/copied appserver specific libraries in the WEB-INF/lib or that you have duplicated EL libraries from (another) appserver in the appserver/lib or maybe -more worse- in the jdk/lib.

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

E-mailed File "The project is not compatible with the current version of Premiere Elements"

I have Version 12 on a PC.
My friend has Version 12 on a MAC.
E-mailed him a file.
He could not open, and a message box popped up: "The project is not compatible with the current version of Premiere Elements".
Could someone kindly asssit, this does not make sense as to why it is not opening, since both computers are using the same version.
Thank you,
Ben
[email protected]

Ben
As said, you cannot open a Premiere Elements 12 Windows project file (named project.prel) in Premiere Elements 12 Mac. And vice versa.
Details
Given that your source is imported into a Premiere Elements 12 Windows project and placed on its Timeline for edit. That Timeline content cannot get out of the program without export. Export choices are found in the Publish+Share section of the program.
In your case, you want to take the Timeline content of Premiere Elements 12 Windows and export it to a format with which Premiere Elements 12 Mac supports (look at .mov or .mp4). In this regard, in Premiere Elements 12 Windows look at Publish+Share/Computer/AVCHD and one of its .mp4 presets or Publish+Share/Computer/QuickTime and one of its .mov presets (suggested H.264 video codec).
Those exports will be saved to the computer hard drive of the Windows computer. Then email the .mov or .mp4 file (beforehand, check the
email carrier's specification for that). Depending on the circumstances, you could transfer the file to a USB Flash Drive for the sharing.
Remember, sharing the .mov and .mp4 involves "whole" video. Depending on the edits, the video may need to be cut by the receipent. You are not dealing with the project file. The story would be different if this sharing and editing is done from Premiere Elements Windows to Premiere Elements Windows. And, if that were the case, then you would have to assure that the source media of the project traveled with the project file. (See Project Archiver feature of the program.)
That is a rough sketch of the situation. I can fine tune the details further if necessary.
Please review and consider.
Thanks.
ATR

HT5372 Is iCloud tab not shared with Windows PCs with Mac or iOS operated devices?

Is iCloud tab not shared with Windows PCs with Mac or iOS operated devices?
I have iPad mini with iOS 8 and a PC with Windows 7 .
I'm trying to set up iCloud. and installed on both but can't see shared devices.

I think you have to use internet explorer to login to icloud.com on your windows pc to see the content.

IPhone Bluetooth not sharing with iMac - WHY????

iPhone Bluetooth not sharing with iMac - WHY????
How can this function not be available on iPhone - What an embarrassing disgrace Apple!!
I refuse to conform to iTunes - NO!
Am so over your lack of basic user services Apple - sort your **** out!!!

The simplest answer is that the existing Bluetooth is not suitable for this purpose. With a max speed of 2.1 Mbps (0.5% that of USB), it would be pretty painful to use for this purpose - a backup of a 16GB iPhone would take a whole day. Transfer a movie? It would take an hour.
On top of that, Bluetooth doesn't provide a standard mechanism for the type of data transfer and synching that iPhone needs -- they'd have to write their own propriety one and you'd still have to use proprietary software to do the data transfer / synching.
A better mechanism would be standard Wi-Fi, which would be MUCH faster than Bluetooth and for which the protocols necessary are already in place. It's still comparatively slow to USB (about 10% that of USB), but much faster than Bluetooth. However, it appears that Apple's research has led them to believe that waiting an hour or two for the phone to backup over Wi-Fi using the existing mechanism is still undesirable.
From what they've indicated about iOS5, however, it seems that they will be supporting more over-the-air updating and synching mechanisms, meaning that, for the first time, you can do most everything but backup the phone without iTunes (though document exchange for certain apps is much faster and easier with iTunes, it won't be necessary).

HP Officejet 6600 is not shared with the Homegroup

Similar Messages

Maybe you are looking for