Hp p7-1010 retail UPGRADING HELP

Hi i have a p7-1010 retail and i was wondering if my upgrades would work for this computer.
PSU-CORSAIR Builder Series CX600 600W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply
Video card-100357-2GL Radeon HD 7750 2GB 128-bit DDR3 PCI Express 3.0 CrossFireX Support Video Card
(You can find both of these items on newegg.com)
Any advice is helpful
This question was solved.
View Solution.

If your asking before the purchase, I would say not to do it. The HD7750 is a low end card, and it's PCIEx16 v3. Your motherboard is only PCIEx16 v2. There would be a slight degrade in efficiency.
There is always a reason to upgrade, but you have not offered any.
What is your goal? Every game has CPU and GPU recommendations. Example Crysis3
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

Nexus 1010 & N1KV Upgrade

We have a requirement to upgrade the ESXi from 4.1 to 5.1 -> which is forcing us to upgrade our N1K environment. We were planning to upgrade the existing Nexus 1010 to 4.2(1)SP1(5.1a), and we have 3 x VSM's which needs to be upgraded to 4.2(1)SV2(1.1a)... Logical sequence of events would be:
1) upgrading nexus 1010
2) upgrading n1kv - vsm1
3) upgrading n1kv - vsm2
4) upgrading n1kv - vsm3
5) then upgrade the VEM, vcenter and ESXi
my question is - I have a spare nexus 1010 pair.. can i do all the upgrades offline, and just have a single change to swap the Nexus 1010's ? I can avoid multiple changes, multiple downtimes if i have to do all upgrades online... Anyone sees any issues with the hot swap of boxes (with all upgraded NX-OS's) ?
Thanks
Raj

Your order is correct.
I'm not sure I understand how you are going to swap the 1010s and only have a single downtime. You'll still need to migrate the VSMs to the new 1010.
Even in your steps above there is never a full outage of the environment during the upgrade.
louis

HT4847 No where do I see a link to "cancel iCloud upgrade" HELP?

No where do I see a link to "cancel iCloud upgrade" HELP?

Yes, I'm familiar with the old RTFM rule, but I tried four different times to retrieve that manual form the Apple site. Each time got an error message that something was wrong, that they were working on it, and to please come back later. On the fifth try last night, I got through and successfully downloaded the user guide. Woo hoo!

Does the retail / upgrade boxed set contain the update?

basically that's what I need to know
I'm getting together another coupled of machines and need to know
if the updated version will be shipped or will I still need to get
the patch after the fact?

>does the retail / upgrade boxed set contain the update?
I very much doubt it - the boxed sets are always done in a large run, and a repress for an update is unlikely. Anyway, it's easy to tell; if you install the boxed product and it says 3.0.1 then it will be. But as I said, I rather doubt it...

HT2240 I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade. help

I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade. help

I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade.
And just what sort of changes in "appearance" did you expect?
If you can access the editing, conversion, and/or properties options once a file is loaded then the QT 7 app has been upgreaded for "Pro" use.

Upgrade Help... is my install disk good?

Hi all... may your 2007 unfold as you prefer...
I bought Tiger and was testing out how it would run, on a cloned B/U firewire drive, before installation on my main drive...
I ran into install problems and after 2 failed attempts on the external drive i'm nervous to install on the main.
The last lines of the installation log reads:
"Dec 13 23:05:05 localhost : Performing post-extraction actions
Dec 13 23:05:05 localhost : SecAlternate system ("/Volumes/OSX B:U") returned 100079". Then it stalls and never finishes.
So here'squestions:
Do i need to have the upgraded disk set up for "Journaling"?
Could i have a bad Install disk?
AFAIK, no problems w/the drives nor w/present OS config.
Any thoughts, recomendations or support would be helpful as i'm at a loss here...
Pismo G4/550;SuperDrive;DLink BT;1GB RAM Mac OS X (10.3.9) upgraded CPU & Optical Drive!

Ce Ann:
Sometimes installing to an external HDD can be a challenge. I understand your hesitation to install to your Pismo and possibly mess things up. However, if you have a Full Retail Version of Tiger I don't think you need to worry.
Here's what I suggest:
1. Back up (clone) your entire HDD to your external Firewire HDD using SuperDuper. The point of this is that if the installation does not go well you can clone your HDD back from the external FW HDD.
2. Disconnect your external HDD from the Pismo.
3. Insert the Tiger install disk and boot up your Pismo holding down the "C" key.
4. When booted go to the Utilities menu and launch Disk Utility.
5. Select your HDD (manufacturer ID) in the sidebar.
6. Select First Aid in the main panel.
7. Click Repair Disk button.
8. If DU reports disk does not need repairs click Repair Disk Permissions button. Then quit DU and go to installation below.
9. If DU reports errors Repair again and again until DU reports disk is repaired.
10. If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
I am assuming that your computer meets the minimum system requirements for Tiger.
Installation
1. You are already booted from the Tiger installer disk.
2. Lauch the installer by clicking Install.
3. After the preliminaries select installation option.
4. If you wish you may choose to customize and deselect Foreign Language Translations (if you don't think you need it--most people don't); also deselect Additional Printer Drivers.
5. Proceed with installation.
6. After successful installation computer restarts and you go through the setup procedure.
7. Restart and Repair permissions (Applications > Utilities > Disk Utility)!
8. Download and apply the Mac OS X Update 10.4.4 (Combo)
9. Restart and Repair permissions!
10. Run Software Update and apply all available updates.
As you may have noticed I am running Tiger on my upgraded Pismo and on a 500, and both run great.
Please post back with further questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

Upgrade help for a newbie..please (PSE 3.0 to 7.0)

I have just bought a new computer & am in the process of transferring everything over. I am now using Vista.
I have been using PSE 3.0 on my old computer, & would like to now upgrade to the newest edition of PSE. I only used PSE for editing & not photo storage/cataloging. I still have discs & serial numbers for both PSE 3 & Premier elements(which I never used). At present I have no photoshop programs (full or trial) loaded on my computer,.
What is the easiest way to get PSE 7.0? Do I have to install PSE3.0 to have an upgrade? Will it work on Vista? Also, if I download the upgrade rather than have the box sent out, what am I missing out on.
I'm tempted to go & just buy the full version from a local retailer because It sounds easier, unless someone can tell me otherwise..
Help/advice would be much appreciated.
Many thanks.

Buy the upgrade. Install PSE7. That's it.
Note: the upgrade, and the full version, are not different in any way except price.

IS-Retail Upgrade

Hi,
Is there any documentation available for IS-Retail ECC upgrade including POS, ITS ? Any check-list/questionnaire for integration with POS/ITS?
Thanks,
Mithun

Hi Mithun
IS-Retail documentation in below links.
http://help.sap.com/saphelp_erp2004/helpdata/en/50/94f500470e11d1894a0000e8323352/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8e/65f438c842cc2be10000000a114084/content.htm
also check the below SDN thread
IS-Retail Documents
Thanks and Regards,
Syf
Edited by: syfulla shaik on Jan 20, 2009 10:53 AM

Upgrade Gurus- CS 5 volume license, CS 5.5 retail upgrade can't install, upgrading to CS 6?

Hi,
I have run into a very interesting problem at work and need confirmation about some information I received. We have six computers with various versions of Creative Suite 5 (Design Standard, Master Collection, etc.) installed on these computers. These are all volume licensed projects. A few years ago we puchased Creative Suite 5.5 upgrades. These upgrades are retail licenses. We have recently purchased new computers and tried to install Creative Suite 5.5 on them. However, Adobe is telling us that because Creative Suite 5 was a volume license and the Creative Suite 5.5 upgrade was a retail license, we could only perform this upgrade once. This means only our old computers can have CS 5.5 installed and our new computers are stuck with CS 5. Which is just wrong. However, we are sick of wasting time with Adobe and are willing to upgrade our new computers to CS 6 (and get rid of the old computers). So here is the question- can we purchase CS 5.5 to CS 6 upgrades (retail license of course) and just use the CS 5.5 serial numbers when we upgrade our CS 5 computers to CS 6?
Cliff Notes: Do I need CS 5.5 installed in order to use a CS 5.5 to CS 6 upgrade or do I just need the CS 5.5 serial numbers?

I have the same issue. Cleaner tool does not hetl, at least in my case. Do you mean that the whole CS5.5 Master Collection should be uninstalled? I have tried everything else:
I tried to uninstall, but Flash Builder was not listed among the programs, maybe I have uninstalled it earlier or it is inclkuded in CS5.5
I deleted all Flash Builder related files, no help
Then I deleted all Flash Builder related registry entries, no success
Finally I downloaded the cleaner tool, its action options do not include anything Flash Builder Releted.
I simply can't get rid of the conflicting version

10.3.9 Upgrade Help?

I just replaced my 10g hardrive in my G3 clamshell ibook with a 40g drive. I installed my 10.3 retail version of osx with a erase and install. It works fine.
When I try and install the 10.3.9 upgrade I get the following messege in the "select a desination" window of the install.
:you cannot install this software on this volume. this volume does not meet the requirements for this update.:
Thank you for your help.

matteu,
Welcome to Apple Discussions.
It is possible that you have selected the wrong update. Make sure that you are using this Update==>Mac OS X Combined Update 10.3.9.
;~)

Video graphics card upgrade help needed

Hello,
I have an HP elite h8 1010 and am looking to upgrade my video card, and, if i must, my psu also. My budget for the graphics card is 150-250 and if i need the psu I'm not looking to spend more than $300(ish) for both. Any suggestions?
I currently have a radeon 9600gt and a thermaltake 430wt model tt-8020a. I'm being overwhelmed with the technical jargon that is discussed when buying the graphics card and meeting the system requirements for same including the minimum wattage of the psu to run the card, including the space required to fit the card. I do have enough space for a dual slot card, but some of these cards are extra long and I'm not sure how to determine if they will fit inside this case. I was interested in this card or something similar...
EVGA GeForce GTX650Ti Boost SuperClocked 2GB GDDR5 192bit, Dual-Link DVI-I, DVI-D, HDMI,DP, SLI Ready Graphics Card
Thanks.

HI Bigst79.
I will be pleased to assist you with some information on graphic cards. I totally understand that all the technical jargon, can be overwhelming, and hard to comprehend.
Rest assured I am here to help!!
After viewing the specifications you provided you will notice the interface on yours is different then on the card you are looking at. When you look at your specification, click on graphics. You will notice that it does not lists PCLR 3.0 but rather PCI Express x16. You can purchase a PCL 2,0 card and it should be backwards compatible.
I am also including the specifications for the card you were looking at purchasing click here. If you will notice under the requirements it does tell you the minimum power supply is 400 watt.
I hope this helps to explain what you need to consider when purchasing the card.,
Please let me know what you decide as I would very much like to know.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Ipod touch can no longer connect to XP following Apple upgrade, HELP !

This is a nightmare. My son has an ipod touch (8gb)purchased a couple of months, and it's been fine until a couple of days ago. I downloaded some music for him, and just about to synch when Apple informed me on itunes of a software upgrade, so naturally I did this. However, it could not complete it saying there was a problem installing the hardware. The ipod then had a permanent picture of a usb cable pointing towards the itunes logo. Itunes no longer recognises this ipod or my own ipod as a device.
I'm not a techhie expert, but I generally know my way around computers, however I could not resolve this.
I called the Apple technical support desk, where I spent 1 hour 45 minutes with 2 different advisors who could not resolve this. We installed and re-installed various components from drivers to itunes to anti virus software, however nothing could change. There was simply no recognition of the ipod at all when connected.It does give a pop up message to restore the ipod, however you can't actually click on the restore button because to have to get rid of the pop up message first, then the screen with the restore facility disappears.
Windows xp is continually popping up a message saying " FOUND NEW HARDWARE WIZARD There was a problem installing this hardware. Apple Mobile USB driver. An error occured during the installation of the device. The system cannot find the file specified."
You then have to click on finish, however the message keeps coming back. We kept going round and round in circles with the technical support people, where it was left that I should start removing programmes on my computer to see if any of those are causing a problem. I have had the same spyware for the last 12 months now and never had a problem before, nor any other programmes.
I booked a genius appointment at my local Apple store today where the assistant reset the ipod to factory settings so it could at least work. I explained the situation, however 15 minutes was never going to be long enough to look into it, and a restore was all they did. Obviously all of my programmes were lost, however when I got home and plugged it back into the computer again, it could not be recognised by itunes and i got the same pop up message. Luckily we have not spent alot on downloads, however my son has lost his music now and it cannot be connected or upgraded. It's under guarantee however a software upgrade by Apple has totally messed my computer up. I really don't know who to turn to now as both the service support and store has not rectified this, something I feel has been caused by Apple.
Any advice is appreciated. Thanks

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Win 7 Pro to Win 8 Pro Upgrade Help needed!

So basically I need somebody to walk me through this like I'm computer illiterate, which I'm generally not, but hesitant to get started without actually understanding the whys and hows.
I bought a Thinkpad S440 with preinstalled WIndows 8 Pro.
It has the Win8Pro sticker at the bottom and the five recovery disks.
Now, the store told me that Lenovo had downgraded it to Windows 7 Pro, so this is what I'm running currently.
I want to upgrade it first to Windows 8 Pro and then to Windows 8.1 Pro (unless I can do it all at once?) Clean install preferable.
It does not have an optical drive, so the Recovery disks which state they can be used to upgrade are pretty much useless. I don't have access to an optical drive anyway, so I can't create iso images of them either.
Also, I don't have a Windows 8 Pro Product key, because apparently it's embedded in the BIOS.
I'm at a loss as how to go about this thing. I bought a Windows 8 Pro machine, I want to be able to use Windows 8.1 Pro. I mean, it should be possible, right? The stickers and purchase order all state Win8 Pro as the OS.
P.S. There's also a 20GB partition on my SSD for Lenovo Repair & Recovery? Is that usable somehow? Why is it there?
Advice? Walkthroughs? I'm completely frustrated with the lack of Product Key.
I've done several upgrades and clean installs on previous computers, but I've never felt limited like this....
Solved!
Go to Solution.

Hi clen3k,
You might not have to do that, but nowadays USB optical drives are very inexpensive and you should be able to find a drive even where you are located.
But, back to the original question. Seeing as how Windows 8 was preloaded and your machine was downgraded to Windows 7, your recovery partition should contain the Windows 8 OS. I say, "should".
Have you loaded anything into the Windows 7 OS that you don't want to lose? Loading Windows 8 might be as simple as booting into Rescue and Recovery and returning the machine to factory settings. Or, just go into Rescue and Recovery from the desktop and return the machine to factory settings. Once you are in there you should be able to see what OS Recovery is going to install.
Only thing is if you don't like Windows 8, you will have to jump through a few hoops to get Windows 7 installed back onto your machine.
I would suggest getting yourself an external hard drive if you don't already have one and doing a backup of the current OS before you start so you could return the machine back the way it is now if something messes up. No matter what happens, down the road you will want to do current backups on a regular basis anyway so you need to have something to do those backups on.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Time to Upgrade - Help!

I currently have a 1.8 G5 that I bought in 2005. It came with Panther 10.3.7 and up to now has been relatively stable. Since I bought the computer within the Tiger realease window, I have the Tiger disc in hand. Since I now need Tiger to upgrade iTunes, Quicktime and other items, I now want to upgrade to Tiger (also as a prep to Leopard).
My migration from System 9 to to 10 on my iMac was a total disaster, even as I had compltely mapped out the change. I don't want this to happen again. I have read many useful helps in these forums and are now trying to put together, hopefully, a good plan of implementation.
At this time, I have repaire permissions using Cocktail, updated all other items using Mac Janitor and am in the process of saving certain folders & files to a DVD.
I am most concerned about, after the upgrade:
1. If my Airport connection will still operate or do I need to save additional settings.
2. Will I still be able to connect to the internet without any additional settings.
3. Am I missing anything in the process so I don't lose my Home settings.
I'm sure somewhere along these items, they may have been many items posted and the ones I have read have been informative, but I'm looking at the big picture and want to make sure I cover all the bases.
Do I really need to back up the entire hard drive? I'm not sure how to do that, but I did purchase a new LaCie DVD RW to assist me if that's the case. I have already used it to back up certain files and folders.
I've been a Mac user for years, it just seems that as more is added to these software update, you have to increase your learning curve by quite a bit.
Hope I've been clear enough on what I am looking for and I appreciate any assiatance. Hope I didn't get too wordy.
Thanks in advance

First backup your current system. Make a bootable backup to a second internal drive or an external Firewire drive.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
For added precaution you can boot into safe mode before doing the clone.
Second, repair your hard drive:
Repairing the Hard Drive and Permissions
Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Third, proceed with the Tiger installation. The default should be an Upgrade install. This preserves all from your previous system. Bear in mind that any third-party software you currently use that isn't compatible with Tiger will require upgrading.
Fourth, after restarting into Tiger run Software Update and install the required updates to bring Tiger to its current version.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Dreamweaver 8 Upgrade - HELP

I just upgraded to Dreamweaver 8 from Dreamweaver MX.
Everytime I want to preview work in a browser, I'm prompted to
"save" the work first.
This is crazy! I want to test on a number of browsers before
I save it. Is there a preferences area to change this?
Any help greatly appreciated.

PREFERENCES | Preview in Browser > enable temp files.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"lisamaenot" <[email protected]> wrote in
message
news:ebg17t$fge$[email protected]..
>I just upgraded to Dreamweaver 8 from Dreamweaver MX.
Everytime I want to
> preview work in a browser, I'm prompted to "save" the
work first.
>
> This is crazy! I want to test on a number of browsers
before I save it.
> Is
> there a preferences area to change this?
>
> Any help greatly appreciated.
>

Hp p7-1010 retail UPGRADING HELP

Similar Messages

Maybe you are looking for