IS-Retail Upgrade

Hi,
Is there any documentation available for IS-Retail ECC upgrade including POS, ITS ? Any check-list/questionnaire for integration with POS/ITS?
Thanks,
Mithun

Hi Mithun
IS-Retail documentation in below links.
http://help.sap.com/saphelp_erp2004/helpdata/en/50/94f500470e11d1894a0000e8323352/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8e/65f438c842cc2be10000000a114084/content.htm
also check the below SDN thread
IS-Retail Documents
Thanks and Regards,
Syf
Edited by: syfulla shaik on Jan 20, 2009 10:53 AM

Similar Messages

Does the retail / upgrade boxed set contain the update?

basically that's what I need to know
I'm getting together another coupled of machines and need to know
if the updated version will be shipped or will I still need to get
the patch after the fact?

>does the retail / upgrade boxed set contain the update?
I very much doubt it - the boxed sets are always done in a large run, and a repress for an update is unlikely. Anyway, it's easy to tell; if you install the boxed product and it says 3.0.1 then it will be. But as I said, I rather doubt it...

Hp p7-1010 retail UPGRADING HELP

Hi i have a p7-1010 retail and i was wondering if my upgrades would work for this computer.
PSU-CORSAIR Builder Series CX600 600W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply
Video card-100357-2GL Radeon HD 7750 2GB 128-bit DDR3 PCI Express 3.0 CrossFireX Support Video Card
(You can find both of these items on newegg.com)
Any advice is helpful
This question was solved.
View Solution.

If your asking before the purchase, I would say not to do it. The HD7750 is a low end card, and it's PCIEx16 v3. Your motherboard is only PCIEx16 v2. There would be a slight degrade in efficiency.
There is always a reason to upgrade, but you have not offered any.
What is your goal? Every game has CPU and GPU recommendations. Example Crysis3
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Upgrade Gurus- CS 5 volume license, CS 5.5 retail upgrade can't install, upgrading to CS 6?

Hi,
I have run into a very interesting problem at work and need confirmation about some information I received. We have six computers with various versions of Creative Suite 5 (Design Standard, Master Collection, etc.) installed on these computers. These are all volume licensed projects. A few years ago we puchased Creative Suite 5.5 upgrades. These upgrades are retail licenses. We have recently purchased new computers and tried to install Creative Suite 5.5 on them. However, Adobe is telling us that because Creative Suite 5 was a volume license and the Creative Suite 5.5 upgrade was a retail license, we could only perform this upgrade once. This means only our old computers can have CS 5.5 installed and our new computers are stuck with CS 5. Which is just wrong. However, we are sick of wasting time with Adobe and are willing to upgrade our new computers to CS 6 (and get rid of the old computers). So here is the question- can we purchase CS 5.5 to CS 6 upgrades (retail license of course) and just use the CS 5.5 serial numbers when we upgrade our CS 5 computers to CS 6?
Cliff Notes: Do I need CS 5.5 installed in order to use a CS 5.5 to CS 6 upgrade or do I just need the CS 5.5 serial numbers?

I have the same issue. Cleaner tool does not hetl, at least in my case. Do you mean that the whole CS5.5 Master Collection should be uninstalled? I have tried everything else:
I tried to uninstall, but Flash Builder was not listed among the programs, maybe I have uninstalled it earlier or it is inclkuded in CS5.5
I deleted all Flash Builder related files, no help
Then I deleted all Flash Builder related registry entries, no success
Finally I downloaded the cleaner tool, its action options do not include anything Flash Builder Releted.
I simply can't get rid of the conflicting version

Windows 7 upgrade: discs will include the option for a 32 to 64-bit upgrade via a clean install?

I would like to know whether the Lenovo Windows 7 upgrade discs will include the option for a 32 to 64-bit upgrade via a clean install? I called Mentor today and was told the answer is no, but I was hoping someone here could tell me differently.
If "no" is truly the answer, I would like to voice my complaint: The upgrade discs from Microsoft (i.e. the retail upgrade discs) include both the 32 and 64-bit versions, so I don't completely understand why Lenovo's upgrade program doesn't offer the same thing. I purchased my T500 in August, and back then Vista Ultimate 64 was not offered, so I chose Vista Ultimate 32 thinking that I could later upgrade to Windows 7 Ultimate 64. This assumption was based off of the info. on Microsoft's website indicating that all upgrades would contain the 32 and 64-bit versions. I even customized my computer with 4 gigs of RAM thinking that I could take advantage of the extra gig once I installed Windows 7 64.
I don't understand what Lenovo or Mentor Media have to gain by restricting a 32 to 64-bit install. I voiced this opinion to Mentor Media over the phone, who responded by saying that I should be happy since I am receiving a "free" upgrade. I don't think this is an accurate assessment for two reasons: (1) I had to pay $17.03 for shipping, and I still haven't received the upgrade and (2) The total cost of my computer was almost $3,000, and the purchase was made a mere few weeks before Windows 7 was released. $3,000 is a lot of money. I waited for the details of the Windows 7 Upgrade Program to be announced BEFORE purchasing my machine. When I finally bought my computer I accounted Windows 7 into the price I was paying. In addition, when I bought this computer I did so expecting good customer service as a given. Not providing a 64-bit upgrade without a rational explanation as to why does not qualify as appropriate customer service.
As most of you know, 4 gigs of RAM is useless with a 32-bit OS. Also, NOW Lenovo is building new T500s with the option of having Windows 7 Ultimate 64 (why wasn't Vista Ultimate 64 offered when I bought my computer???).  And the price for choosing Windows 7 Ultimate 32 is EQUAL to the price for choosing Windows 7 Ultimate 64, which proves that there is no cost difference. I just want to know what Lenovo has to gain by denying customers a 64-bit upgrade? There would really be no additional cost since as I mentioned before, Microsoft's retail upgrade includes the 32 and 64-bit OS on one disc. If anything I would think that it's costing Lenovo money to strip the 64-bit install from the upgrade discs.
Can anyone please address my problems? Do you think there is anyone at Lenovo I could contact to voice my opinions? I have been a loyal Thinkpad customer for over 5 years now, and I expect better from Lenovo. Thank you for reading!
moderator note: core question add to title, as stated in the forum rules and it will help others too answer your questions.

Daventry wrote:
Is there any way to request a 64-bit OEM? Why should Lenovo care whether I want a 32-bit or 64-bit as long as it's the same edition (Ultimate edition)?
if your system shipped with a 32-bit version of vista then you will be sent 32-bit windows 7 upgrade media.   the reason for this is two-fold.
first, because this is upgrade media, it's impossible to install a 64-bit version of windows over a 32-bit version.   doing so would require a clean installation and upgrade media simply won't allow this.   this is the case with retail media, too.   if you had 32-bit vista installed and wanted to upgrade it to 64-bit using retail media, you'd have to wipe your system or set up a dual-boot.
second, the COA (certificate of authenticity) on the bottom of your system is for vista.   because of this, your new license is of an upgrade from vista to 7.   this is how microsoft licenses it and it is their policy, not lenovo's.   microsoft's policy with OEMs is that you must install vista first, then upgrade to 7 (unless, of course, you purchased your system native with 7 on or after the 22nd).   since your original lenovo preload is of a 32-bit OS, the issue becomes circular and you'll have to refer again to the first reason.
i understand your frustration and wish this stuff were made easier for everyone.   it's repetative reading post after post of people with 4GB installed who don't understand the limitations of a 32-bit environment. i wish both manufacturers and users switched to 64-bit OSes sooner. the same thing happened when the industry went from 16-bit windows 3.11 to 32-bit windows NT4/95 and limitations went from 16KB all the way up to 4GB (which, in 1995, no one thought we'd ever exceed).   the difference is that people were complaining on BBSes over 14.4k modems instead of on GUI-based forums using broadband connections.   times sure have changed.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Best 540 path to retail Win 8.1 from Win 7

I have read a whole bunch of posts on the issue of installing Win 8.1. According to the labels on the disks I received with the machine, they contain win 8.1 pro. Which is what I want to have installed. However I am concerned about future installation of win 9.
I can't use the installed Win 7 and then install Win 8 from the disks because this process appears to destroy any installed software; unlike the retail upgrade.
Is the best path to simply discard all of the supplied OSs and do a clean install of the retail Win 8? Then win 9 should be good (I understand we really don't know what Win 9 upgrade is going to do).
What is the best method of providing the required drivers if I do a clean retail install? Are any of the Lenovo supplied applications actually necessary for proper operation and can they be installed on a retail Win 8?

I downloaded and installed ImportExportTools and was able to export mail from the Win 7 PC but when I try to import it into existing files it doesn't work. The instructions you point to only give instructions on how to export files but not importing and the Thunderbird Import will only import files from other email clients and not from other files. How does one import the files from Win 7 Thunderbird into Win 8.1 Thunderbird?

Query on Microsoft Windows 8.1 Pro Upgrade Licensing

I am upgrading from Windows XP OEM to Windows 8.1 Upgrade paper license. Does these upgraded paper of Windows 8.1 would still be valid if I discard OEM machine after 1-2 year? Or upgrade license would be legally invalid once actual machine will be
down/discarded. My second query is that
Instead of upgrade If I buy fresh/new win8.1 paper license through Open License Policy and install on these Windows XP machine, would these licenses still be valid in case machine down/discarded?

If you are referring to retail upgrade licensing, that license is separate from the OEM license which validates the upgrade. So if you have a system with Windows XP OEM and you install a retail upgrade on it, then discard the box as part of a refresh to
a new system which has Windows 7 preinstalled, the upgrade license can be used on the new system once it is removed from the old system.
Volume Licenses for Windows are only available as upgrades, so the same logic applies to them. In neither case can the upgrade operating system be installed to a system which does not have a qualifying operating system (bare metal).
Brandon
Windows Outreach Team- IT Pro
The Springboard Series on TechNet

New hard drive, Leopard upgrade, restore disks needed?

Hi
I have a macbook which shipped with Tiger and ilife 06.
Several months ago I upgraded to Leopard and ilife 08 - both great.
Now I want to upgrade my hard drive to a bigger one, so I just need a bit of advice please.
There is plenty of advice here and on the apple support site about how to upgrade your hard drive, but not when you have upgraded the OS.
The simplest way would be to use CCC to clone it, but I want a clean install. I hope that I don't have to use the restore disks, then upgrade both OSX and ilife - that would be painful!
Anyway, here goes.
I have a SATA enclosure.
What is the best way to proceed? Do I need either of the restore disks that came with the macbook, or do I just need the new Leopard and ilife (retail) upgrade disks?
I am happy with taking the old drive out (after doing a last time machine backup - just in case!) and putting it into the external enclosure and putting the new drive in the macbook.
Then, what is the best way to restore my data? Time machine? Migration assistant? Dragging and dropping everything? (what about preferences & settings?)
Thanks for all your help.

Thanks - do I need the old restore disks that came with the mac at all, or are they just Tiger, ilife 06 and a bit of free software, therefore not needed. I am a little concerned that they contain some drivers etc that i might need.
I have retail disks of Leopard and ilife 08, bought separately.
Thanks
Karl

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get to the chat. Please advise!!!!

MoeGhazal I reviewed your account and it looks like you have have upgraded from a CS4 volume license for Design Premium to a retail upgrade of Design Premium 5.5.
I also show that you made two purchases of CS5.5 Design Premium but the second purchase was canceled. Please make sure you are utilizing the serial number which ends in 7886.
If you are using the correct serial number then it is likely the installer will not recognize your volume license CS4 serial number as being valid for an upgrade. If you can contact our support team then you can be walked through an unlocking procedure to allow you to proceed with the installation. You can contact our support team directly at Contact Customer Care. You may want to try installing a web browser you have not previously utilized. It is likely a toolbar or some other software application is affecting your ability to access chat support successfully.
If you are still unable to reach our support team then please verify the information under your account is accurate. If you can please then update this discussion after confirming this then I can request a member of our support team contact you directly.
Again I would recommend reaching out directly if possible as it will be the most efficient method of resolving your current error.

Acrobat 9 upgrade from OEM Acrobat 6

I've used Acrobat standard in my business since v4.0, and upgraded once to v5.05. I am now migrating to a new WinVistaUltx64 system, and find that Acrobat 5x-8x are not compatible with Vista.
In order to reduce my costs, I am thinking of purchasing an OEM full Acrobat v6 Standard and Acrobat v9 Standard retail Upgrade. I expect to be able to install the v9 upgrade on my Vista system, using the installation CD from v6 as legacy verification for the v9 upgrade. The OEM v6 will not be installed on the Vista system. I have done this previously when I upgraded to a full retail v5 from a full retail v4, but not from an OEM version. Can anyone with more experience with Adobe Acrobat upgrades advise me of problems I might encounter in this scenario?
I know that OEM versions don't come with support options, but I have upgraded OEM OS versions to retail versions before, and support became available with the retail upgrade. Will support be attached to the Acrobat v9 retail upgrade, if I am upgrading from an OEM version?

You have to update to at least AA8.1.2 to use VISTA and 64 bit systems. I think that version will do it. Of course at this time, AA9 is what is available anyway. AA6 does not run on VISTA as far as I know. Be aware, if you do forms you need to upgrade to a PRO version. It is best to think of Std as an economy version. It left a lot out that users of AA4 and AA5 came to expect.
AA6 works fine on XP. Even AA5 works fine on XP, at least it does for me. I use AA8.1.2 on VISTA Business and AA7 on an XP tablet. As for the OEM upgrades I have no clue to help you. As far as I know, the upgrade will be to the full product. I do think that if you upgrade, the previous version that the upgrade was based upon is not supposed to be used any longer. You did not mention that scenario, but just one aspect to consider in case you had been thinking it.

Upgrade FCS Academic To FCS 6

My academic serial number is not working when the new final cut studio 6 upgrade installation asks for my old serial number. I am positive I wrote it correctly, why does it say that it is invalid?

FinalThis, in case you're looking for a second
opinion, here is is: Danny_boy is correct. A FCS1
academic serial number will not work with the FCS2
retail upgrade package.
At this point you probably have two options: contact
your retailer and see if you can swap the upgrade
package for the retail version and pay the
difference, or, try to find a buyer for the upgrade
and stick with FCS1 'till you can afford to buy the
retail version.
I feel terrible now because I cannot get a refund but i clarified with the apple sales person exactly what I had so that no problems would occur. They cannot be allowed to do this, I should receive a refund because I was told otherwise. I would have never bought it (obviously). are exceptions made?

Can't upgrade from Compressor 3.0/Final Cut 6.0

I've just installed FCS2 Retail upgrade from FCS1. FCS1 was never installed on this machine, but I did have a couple of botched installs of FCS2 here. Through extensive means, all traces of the previous installs were deleted.
Everything seems to work ok (including Compressor 3.0), but when I do a Software Update check, none of the Compressor updates (3.01, 3.02, 3.03) come up. When I go through the Apple Downloads site, no Compressor updates there either. In addition, Final Cut Pro updates also don't show (currently stuck at 6.0). Other apps in the suite updated to current versions according to Versiontracker lookups (though LiveType is at 2.1.3--LiveType doesn't show up on Versiontracker).
Pro Applications Update 2008-01 did show up in my Apple DL list (but not in Software Update), but it wouldn't install; it said something about an error (wasn't specific, naturally), and to try again (which I did not).
So here's my questions:
1) Why won't the Compressor & FCP updates show up?
2) Were there enough improvements in any of those updates that I should care that they aren't showing up?
3) Any other feedback about Pro Apps 2008-01 update?
Thanks!

Thanks! I was beginning to suspect that. As such, I went to try the Pro Apps install again, and this time it worked! Go figure, I guess I should have heeded the installers advice when it told me to "Try Again".

Is there a way to upgrade from Dreamweaver CS5.5 to CS6 in the student store?

I purchased Adobe CS5.5 when it was released and am now looking to upgrade to Adobe CS6 for Mac. I am a full time student and so was wondering if there is a way to upgrade from CS5.5 to CS6 and still get a discount as im a student.
Thanks In advance.

There are no student upgrades. Never have been, never will be. Your options are to either buy a new student verison or pay for the full retail upgrade price. That's always been Adobe's policy. If you are looking to jump on a cloud, then you need to contact Adobe sales for help.

Photoshop CS6 Extended upgrade from Photoshop CS5 Extended

I am running the Teacher/Student edition of Photoshop CS5 and plan to up grade to Photoshop CS6 Extended non- eacher/Student edition. Will the be any complications with this upgrad.

Hi Jerry,
While upgrading you should maintain the same form of licenses, which is if you haveretail CS5 then do get the retail upgrade of CS6,
If the cs5 version is volume then do get the volume upgrade. Please refer to this link for the upgrade path,
http://helpx.adobe.com/x-productkb/policy-pricing/upgrade-upsell-paths-cs5-cs5.html
Regards
Rajshree

Reselling Final Cut Studio Upgrades?

Several years ago I upgraded a full version of Final Cut Pro 2 to Final Cut Studio 2 to Final Cut Studio 3. Both FCS 2 and 3 are all full-retail upgrades, not academic upgrades. Quite frankly, my company is not doing much high-end video production so I'm thinking about selling my Final Cut Studio upgrades so I can purchase a new Mac, but I have a few questions.
Since I upgraded from Final Cut Pro 2 to Final Cut Studio 2 to Final Cut Studio 3 do I have to sell everything as a bundle or can I sell each upgrade individually?
Does it matter if I registered the software with Apple?
If so, how can I find out if the software is registered?
Thanks!

from Apple's Software License Agreement (legal stuff): http://images.apple.com/legal/sla/docs/finalcutstudio2.pdf
"3. Transfer. You may not rent, lease, lend, sell, redistribute or sublicense the Apple Software. You may, however, make a one-time permanent transfer of all of your license rights to the Apple Software to another party, provided that: (a) the transfer must include all of the Apple Software, including all its component parts, original media, printed materials and this License; (b) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; and (c) the party receiving the Apple Software reads and agrees to accept the terms and conditions of this License. All components of the Apple Software are provided as part of a bundle and may not be separated from the bundle and distributed as standalone applications.
Updates: If an Apple Software update completely replaces (full install) a previously licensed version of the Apple Software, you may not use both versions of the Apple Software at the same time nor may you transfer them separately."
-DH

IS-Retail Upgrade

Similar Messages

Maybe you are looking for