Hp2000 boot error without warranty

Cannot find 2HDDs on blue startup screen

Hi,
Please post the HP product number and operating system for your PC so that the members of the community can better assist you with your questions and issues.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

  • Share FCPX with Blu-ray  USB3 LaCie writer boot error

    Hi
    I've been around the bush and back looking at how to burn a blu-ray movie to a disc from FCPX and a slim Blu-ray LaCie drive.  I was able to burn a 5 minute movie from FCPX without any trouble but as soon as I try and burn something larger (like an 11gig movie) 1080 HD I get up in the morning to find an error referring to boot directory or something with a boot in it. Sorry can't be more secific than that.  It's costing me everytime it goes wrong. 
    I logged a job with LaCie and they said any disc is compaitble so i'm wondering whether there is an issue with Final Cut Pro X ?  Thank you for any assistance. 
    Mike

    OK, I have FCPX. I burned DVDs etc all fine. I then burn a Blu-ray.  Initially I tried to save to hard drive and burn from there but that didn't work.  Seeing FCPX can burn directly to optical device (LaCie) I tried that (share menu in FCP) I got a boot error message that I didn't take a note of.  Today I tried again after I checked a few things out.  I put in my BD-R disc into the device.  FCPX says it is "finishing create blu-ray disc: burning Blu-ray"
    at 85% it then said Insert Disc, i did this and it is hanging. 
    I have been able to burn a 5 mintue Blu-ray sucessfully but as soon as I get to a 55 minute movie I have been unsuccessful.  Layers are automatic.  speed is automatic, it's a brand new mac running OS X 10.8.2    The guy I bought the discs from reccomends Roxio but why should I buy new software when FCPX says it burns.

  • [Solved]Syslinux "booting... boot error" when booting Windows 7

    Hello, I've set up my computer to dual boot windows and arch. Windows is on a separate hard drive and I was able to configure syslinux with a boot menu allowing me to select Windows at startup. For a long time this has worked without any problems whatsoever, but this morning I tried selecting windows and I got what is probably the most vague error message I have ever seen.
    "Booting...
    Boot Error"
    According to this post this problem comes in when the ldsyslinux.sys file cannot be found. Unfortunately I was not able to use his suggested fix
    syslinux -U /dev/sdb1
    I wasn't aware that there was a -U flag for syslinux and after checking it seems that there isn't one.
    Last edited by samstr (2014-11-26 04:48:55)

    Sorry, I actually just fixed it on my own, it turns out my BIOS settings were a bit... weird. For some reason I didn't have my windows drive listed and it tried to boot a USB drive I had plugged into my computer. I just had to fix the drive order and it worked fine. Sorry about starting a fairly useless discussion.

  • Compaq CQ62-215DX-fan boot error, even after fan replacement

    I have a Compaq CQ62-215DX laptop. Everytime on startup I get this boot error "a system fan is not operation correctly" The system then automatically shuts itself down after a few seconds.
    I ordered a replacement fan and installed it, however I'm still getting the same issue.
    I figure the chances of the newly installed replacement fan being DOA are fairly low, so what should be next step to fixing my problem? Are there any common problems with the replacement of these fans on this particular computer? The laptop is a few months out of warranty so I'm either stuck paying a bunch of money to fix it, or buying a new computer if I can't fix it myself. Help!

    It's either a bad fan which I agree is unlikely or a bad fan header on the motherboard which means a new motherboard. Sorry.

  • PO Approval stuck in error without any Error message

    Hi All,
    we have few notifications for PO Approval where they are stuck in error without any error message. they are also not showing in the worklist of the approver nor in the wf_notifications table. please help on this on how to solve this. we have done various options to solve the issue like skip/rewind/suspend/retry. but none of them works..... below is an extract of such an notification -
    Error in Workflow POAPPRV/3112-127925
    From SYSADMIN
    To Das, SD
    Sent 12-Dec-2011 16:55:01
    Closed 12-Dec-2011 17:07:30
    ID 164593
    Responder Das, SD
    An Error occurred in the following Workflow.
    Item Type = POAPPRV
    Item Key = 3112-127925
    User Key =429766-245
    Error Name =
    Error Message =
    Error Stack =
    Activity Id = 10770
    Activity Label = ROOT:POAPPRV_TOP
    Result Code = #STUCK
    Notification Id =
    Assigned User =
    Thanks,
    Sam D
    Edited by: Sam D on 12 Dec, 2011 1:45 PM

    Please post the details of the application release, database version and OS.
    Can you find any errors in the Workflow log file?
    All Purchase Orders or Requisitions Getting Stuck in Pre-Approved or In Process Status - Troubleshooting Checklist [ID 1104843.1]
    Troubleshooting for Requisitions / Purchase Orders in Process or Pre-Approved Status [ID 225017.1]
    Also, search MOS for (POAPPRV stuck) and go through the docs.
    Thanks,
    Hussein

  • I made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls

    i made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls
    Re: can i install windows for pc on my mac or do i need the windows for mac? 

    There is no Lion DVD. Start Boot Camp Assistant and select the menu item to download the Windows Support Software.
    Read and follow the Boot Camp Installation Guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Boot Error Sequence

    IdeaCentre K210 57078894 works fine until I completely shut it down and restart it.  I get errors like Boot Error Sequence, PXE-E53 No boot filename received, PXE-M0F.  When I go to the BIOS setup it says Primary IDE not detected.  Can anyone help fix this problem?

    Hi,
    You might try removing the hard drive and then put it in an external 3.5" USB enclosure and then test it on a different PC. This type of adapter could also be used to test the hard drive on another PC.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • [Solved: Im dumb haha] Login Manager on boot up without entrance-svn?

    Is it possible to have slim load up on boot up without using the entrance-svn package/daemon?
    Im running openbox, if that makes any difference.
    Thanks in advance.
    Last edited by hubble (2009-05-05 00:35:55)

    I'm using Slim currently and I don't have it installed.  I just followed the guide in the Wiki and it's working fine.  I installed it via yaourt and added 'slim' to my DAEMONS in /etc/rc.conf.
    Last edited by .Maleficus. (2009-05-05 00:29:24)

  • Some boot error

    I am getting some boot error at the very end at boot time and it moves to fast for me to catch it.
    I did try with read -n1 added to rc.conf but as the error is at the very end so it just jumps past the error.
    I had a look in /var/log files but could not really find anything.
    Where to find the boot log? Or something else?

    cell wrote:I did try with read -n1 added to rc.conf but as the error is at the very end so it just jumps past the error.
    You should add read at the end of /etc/rc.local

  • RAID 1 of boot drive without reformatting?

    Hello,
    Under Leopard, I was able to enable RAID 1 on a boot drive without having to move data, reformat, move data back, etc., using:
    +diskutil enableRAID mirror disk0+
    This has worked for me many, many times without issue.
    I'm now attempting this on a Mac Pro boot drive running 10.6.2 using:
    +diskutil appleRAID enable mirror disk0s2+
    But, it's not working. Actually, it's working in that it enables RAID 1 on the drive, but as a result, the Mac Pro will no longer BOOT from the drive. The drive is available (ie. I can access it if I boot from another drive with an OS on it, etc.) and the drive shows up in Startup Disk (in System Preferences) as a bootable drive, but it DOESN'T show up when I boot the machine holding down the option key. As soon as I delete the RAID, the drive is bootable again.
    Does anyone know if there's a way to enable RAID 1 on a boot drive under SL without the need to reformat? Other options/solutions (3rd party, etc.)?
    Regards,
    Kristin.

    Hi Kristin,
    I'm seeing exactly the same problem, but I thought it was limited to having two raid sets and bless getting confused.
    My MacPro3,1 has two RAID mirror sets and it appears the wrong Boot OS X partitions are used.
    The volume I would like to boot from is a mirror of disk0s2 and disk1s2 and mounted at /Volumes/srvosx. Disk Utility successfully created the two Boot OS X partitions disk0s3 and disk1s3.
    Then I restored a working system onto the raid volume using asr.
    However, when using bless, it activates the Boot OS X partitions of the other raid set, which has no system installed. So this choice makes no sense at all. The other raid set is composed of disk2s2 and disk3s2 and mounted at /Volumes/data.
    This is the output I get from bless:
    bless --folder /Volumes/srvosx/System/Library/CoreServices --bootefi --setboot --verbose
    EFI found at IODeviceTree:/efi
    Mount point for /Volumes/srvosx/System/Library/CoreServices is /Volumes/srvosx
    Common mount point of '/Volumes/srvosx/System/Library/CoreServices' and '' is /Volumes/srvosx
    GPT detected
    Booter partition required at index 3
    System partition found
    Booter partition found
    Returning booter information dictionary:
    <CFBasicHash 0x100601210 [0x7fff702c5f20]>{type = mutable dict, count = 3,
    entries =>
    0 : <CFString 0x100019a60 [0x7fff702c5f20]>{contents = "System Partitions"} = <CFArray 0x100600c90 [0x7fff702c5f20]>{type = immutable, count = 1, values = (
    0 : <CFString 0x1006016a0 [0x7fff702c5f20]>{contents = "disk2s1"}
    1 : <CFString 0x10001a2c0 [0x7fff702c5f20]>{contents = "Data Partitions"} = <CFArray 0x1006012d0 [0x7fff702c5f20]>{type = immutable, count = 1, values = (
    0 : <CFString 0x100601830 [0x7fff702c5f20]>{contents = "disk2s2"}
    2 : <CFString 0x100019a20 [0x7fff702c5f20]>{contents = "Auxiliary Partitions"} = <CFArray 0x100601280 [0x7fff702c5f20]>{type = immutable, count = 1, values = (
    0 : <CFString 0x7fff702ae5b0 [0x7fff702c5f20]>{contents = "disk2s3"}
    Substituting booter disk2s3
    I can get it to boot just fine by manually populating the Boot OS X partitions, but this is a pain.
    I have tried to figure out what is going on from the bless source code at
    http://www.opensource.apple.com/source/bless/bless-71.1/libbless/RAID/BLGetRAIDB ootDataForDevice.c
    But since bless seems to get the information about the Boot OS X volumes from IOKit, I also checked the device tree with IORegistryExplorer (Developer Tools). Everything looks fine though.
    I wonder where the linking between the raid volume and its boot helper partitions is done. Clearly it does not work right in my case and I suspect it could also be the same problem in your case.

  • How to create Lion recovery boot usb WITHOUT recovery partition?

    I give up.  I can't find the answer to this.  So, I'll just ask and hope.
    I have a mid-2011 mini that was upgraded to Lion.  However, it had a Bootcamp partition running Windows 7.
    Apparently, whoever upgraded my machine didn't create a recovery boot disk before upgrading. 
    So, I have no recovery partition and apparently no ability to create a recovery boot usb without one.
    Apple's ******** support policy is to completely wipe the hard drive and reinstall everything--which is simply not going to happen.

    Eric. wrote:
    Have you tried this?
    http://support.apple.com/kb/DL1433
    I made one on a USB flash drive.
    Problem with that solution is that:
    Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
    If you kept a copy of the installer, then open it up, and restore the InstallESD.dmg to an empty partition or flash drive. Do note that doesn't give you the Recovery HD, but you won't need one since you can reinstall w/o downloading anything but additional components from Apple's servers.

  • When trying to make purchase I am asked to improve apple security by setting up 3 questions.  I have tried many times with out success.  Apple always returns an error without identifying what the error is.  Will not allow me to advance without setting up

    Apple is requiring the establishment of 3 security question (increase online security), but coninuously gives an error without identifying the error.  I am not allow to proceed or bypass and cannot use any apple store features.

    Exactly when does this error occur?  What is the exact wording?

  • How to suppress compiler errors without excluding database objects from the "Schema Compare" tool (using VS2013/SSDT)

    Hi,
    In short: How to suppress compiler errors without excluding the object from the "Schema Compare" tool ??
    A bit longer:
    We have a SQL Server 2008 project in Visual Studio 2013 running SQL Server Data Tool.
    An old database, with a lot of history in, has been imported into SSDT and there are many syntax errors preventing the project from compiling/running. An typical error is: "SQL70001: This statement is not recognized in this context".
    Running the "faulty" scripts on the server, executes just fine. I understand that there are syntax errors and they should be rewritten, but it's not gonna happen just like that - it is a slow process over a long period of time.
    I know it is possible to change Build Action to None, but that also exclude the object from appearing in the Schema Compare function/window.
    So - how to ignore some compiler errors and still having the objects to appear when doing "Schema Compare" ??
    Thank you in advance.

    Hi Steven,
    Thanks for your comments.
    Well, it sure does help in the future, but right now i would prefer the other way - to suppress some errors and still allow the scripts to build.
    The thing is that if we "rewrite" the objects into create scripts, then we have a huge test job ahead of us + the database environments (PROD vs DEV and UAT) does not share the same AD or DB users and therefore grants is lost if dropping/creating
    objects, right!
    If you drop a object before creating it, the drop will also drop the roles and grants and since they don't share user table, the create will not be able to add the permissions again. There might be a solution to that, but it is going to be very complicated
    for some newbies like us. We need something we can trust.
    BR
    Peter

  • Can Apple Replace My Earphones without warrenty? Or Can I Go In And Trade Them In Without Warranty??

    Can Apple Replace My Earphones without warrenty? Or Can I Go In And Trade Them In Without Warranty??

    No.
    B-rock

  • Hp Pavilion a6863w getting disc boot error..can't get windows vista to open...need help diagnosing

    My computer will not open Windows Vista.. I get a disc boot error. I have run a few diagnostics but need help to preceed. Have important files on the computer I need access to. Can anyone help walk me through the process? Thanks  Also when I look at the check s that have been done it says something about a registry problem.  HP Pavilion a 6863w 
    {Edited for privacy}

    Have you run a Hard Drive test in BIOS?
    Jennifer P
    I work for HP.
    Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks

Maybe you are looking for