HR ABAP : User Exit after Position Creation
Hi,
We had a requirement of automatic creation of certain Relationships after the creation of position in HR.
Is there any USER EXIT for such cases?
I need an user exit which should get triggered after the creation of the Position.
Can anyone let us know the enhancement name if it exists?
Regards,
<i><b>Raja Sekhar</b></i>
Hi Raja Shekhar,
Chk this link...this might help you out.
http://www.planetsap.com/Userexit_List.htm
Reward points if you find this as a right solution
Regards,
Harini
Similar Messages
-
BAdi or user exit after PR Creation
HI All,
We need a BADI or user exit which will trigger after the Purchase Requisition is Created and the PR no. is saved into the data base. I need to do some modifications based on the PR No.
Waiting for your response.
AmarnathHi Amar,
just go through the following link....
Re: Purchase Requisition BADI/User Exit
Thanks
Ashu -
User exit before TO creation to chage MAKTX field or FM to change it after
Hi all,
I need some WM Expertise help.
When I create a Sales Order from program (with bapicreatefromdata2) , the system automatically create a delivery, and then, a transfer order with no immediate confirmation. The TO is manual confirmed. In bapicreatefromdata2 I completed on each item line the field ARKTX with a description (Example: red - material description ). This field is automatically completed in delivery( same field ARKTX). But I need this description also in transfer order for each line (field MAKTX). The TO is created automatically and the field MAKTX is completed with the description from the material master.
So, I need an user exit before TO creation to change the field MAKTX. I have tried user exit: MWMTO001 and is not working I think because the TO is created with no immediate confirmation. Also I putted break-point everywhere in program SAPML03T (standard program for TO creation) and I changed the settings in debugger mode. I checked System Debugging and Update Debugging. Nothing happened. I cannot find the place before TO is created.
An alternative to this is to update LTAP (item table for TO) after TO immediate creation in include MV45AF0B_BELEG_SICHERN but I can't find a function module to update the table before TO manual confirmation. I tried L_TO_UPDATE_PREPARE but this I think is for confirmed TO.
Any one who worked on this kind of things, Please help.
Thanks in advice,
Bogdancheck these exits....
EXIT_SAPMM06E_012
<b>EXIT_SAPMM06E_013</b>
EXIT_SAPMM06E_014
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_018
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
vijay -
User exit after saving a sales order
Dear SAP-community,
I am looking for an user-exit that runs after the creation of a sales order. I need the created VBELN of the sales order and want start some additional functionality which should be triggered directly afetr saving?
Does anyone know such a exit?
Thanks
Kind regards
MarkusPlz SEARCH in SCN before posting.
User exit after saving sales order
user exit for saving a sales order -
User Exit after posting document (FB01)
Dear all,
I want to change the BSEG entries based on a mapping table.
Is there any User Exit after posting document. I debuged long time and couldnt find any User Exit where u can change the BSEG.
Thank u very much!
best regardsthank u for ur answer. I know it but not really! I know there is also an option. But my question here:
-> Is here no User Exit where I can change the BSEG?
-> It is possible to write a normal ABAP code in the substitution?
Thank u very much -
BAdI: or User Exit for Campaign Creation IN CRM 5.0
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshIN WHICH TRANSACTION U R CREATING CAMPAIGN ??
-
BAdI: or User Exit for Campaign Creation
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshDear Ganesh,
As campaign can be created and executed individually also, it will never check for higher level project ID.
Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan. -
User Exit after IDoc number (control record) generated
Hi
I'm looking for the user exit after the idoc number is generated. Can anyone provide a refrence on such user exit? the process is outbound.
Tried with some of the available exits but none worked...Hi,
Are you referring to any specific scenario?
Regards
Vinod -
Dear Gurus
Is there any user exit after saving billing document to save the data into Ztable for the purpose of control in our business process
prasad.JUser Exits For Billing
o USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified
in the billing type table and can be changed in this user exit. This
user exit is only called when the billing documents is created.
o USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program
RV60AFZZ)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMKCV (header fields).
o USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMPCV (item fields).
o USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program
RV60AFZC)
Depending on the number range, table TVFKD is used to set the
billing date (country-specific requirments in Italy).
USEREXIT_NUMBER_RANGE is automatically deactivated when this user
exit is being applied.
o USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created.
It is used to provide the header and the item of the new billing
document with deviating or additional data. -
User-exit after updating PO from Order response ?
Hi All,
We are looking for a user-exit after the Purchase order is updated from an order response.
With this user-exit we would like to trigger a WF to the user to carry out transaction YE22N, with the WF the user(PO creator) can execute and update the PO.
Any feedback, tips would be helpfull and for sure points reward.
Thanks & Regards,
NameethHi Anand,
Sorry for the confusion., try to explain here.
During the updation of PO from inbound ORDSP IDoc, we have a transaction YE22N to confirm if the changes in ORDSP is accepted or not.
So we would like to automate this so that after the PO is update/saved from ORDSP IDoc, then we can trigger a workflow to send email to the PO creator.
If its still confusing then, "I would like to know if there is a user-exit or if Workflow can be triggered after updating PO" ?
Regards,
Nameeth -
User Exit for Delivery Creation
Hi,
I am looking for an User Exit for Delivery Creation, which should provide a Sales Order Number. This is required before Batch determination. Can any one help.Hi,
I think you can try with MV50AFZ1 user exit.
In move fields to LIKP and LIPS routine you can get the sales order.
LIPS-VGBEL gives the sales order.
Thanks,
Rohan -
MIGO BAdI or User-Exit - After Database Commit
Hello,
I'm looking for a BAdI or user-exit after database commit for MIGO posting. I want to create a FI document after MIGO posting.
I already tried MB_MIGO_BADI BAdI but system gives a short dump. So I have to find a exit or BAdI after database commit.
Thanks for helping in advance.
Regards,
BurakHello,
This issue solved.
I used MB_DOCUMENT_BADI / MB_DOCUMENT_UPDATE and it solved my problem.
FYI.
Regards,
Burak -
User Exit after creation of Production Order
Hello gurus.
I would like to populate a table with the Production Order number once I create the document in transaction CO01. The problem is, I cannot find a user exit that can be executed after I save the Production Order number.
We use internal assignment of production order numbers, so we don't know the number of the document until it's created. I'd like to find a way to be able to get the number of the document, once it's created and add it in a custom table I created.
Is there a User Exit for this? Or maybe an alternative way of achieving this?
Thank you.Fernando,
I would suggest you to create a custom table and custom program. The program should pick up the all the orders which were created from AFKO table, on successful completion of running the program it should update the custom table with the date and completion time. So next time when this program is run, it should pick up order who's creation date and time is greater than that in the custom table. You can schedule to run this program in background.
Regards,
Prasobh -
MIGO User Exit after Mat Doc creation
Hi Experts.
I would like to request for your help about an user exit that will be triggered after the material document has been created or posted. The requirement is that I need to extract the material document from SY data and create a textfile via download. Thanks a lot!
Best Regards,
RandyTransaction Code - MIGO Goods Movement
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal
No of Exits: 8 -
BADI / User Exit after Saving of Business Partner
Hi Experts,
Is there a BADI / user exit that is triggered after saving / updating of Business Partner using transaction code "BP"?
We want to send a XML file thru ALE after creation/modification of BP. We are using CRM WinClient 4.0.
Thanks.Hi Mikhail Khorpyakov,
Thank you very much for your reply. It was a helpful answer.
BUPA_GENERAL_EXPORT is triggered before database update of table BUT000 and other related tables.
Is there a BADI that is called after saving which contains general data of business partner?
Thanks in advance..
Maybe you are looking for
-
Hi , We are planing to upgrade our 10g R2 CRS to 11g R2 CRS on HP-UX server ,while running cluvfy tool we are getting the below error.Please help me to fix this issue. Checking settings of device file "/dev/async" Node Name Available
-
i have mac pro i7 , 8GB RAM , 750 HDD , can i install windows 7 ultimate 64 as a parrallals desktop?
-
How to make multi value parameter optional in SSRS
I HAVE REPORT IN SSRS 2005. I have @strjournal as multi value parameter. Allow blank is checked. Parameter values r assigned through query. select jornalno,jornalno as descr from tran_table union select 'NULL','NULL' So for @strjournal, valuefield
-
Minmal Custom Kernel 2.6.29.6 for NC10 - fatal: acpi_cpufreq
Hi, I try to compile a minimal custom kernel based on 2.6.29.6 for my Samsung NC10 netbook. Main reason is to get the namuga webcam running (doesn't work with 2.6.30) but also to get something optimised (boot-speed). The kompilation and the kernel wo
-
Ok, bare with me, here is what i want to accomplish and any suggestions or advice will be appreciated and welcomed. I have a 3 bedroom house all with plasma tv's. i have 2 macpro notebooks and a imac. what i am looking to do is put a apple tv in each