HR FORMS (TX - PE51)

Hi,
I have copied HR FORM TF00 to Z form ZF00. In the header part , i want to add 3 single fields of a custom infotype.
Now when i create sinle fields, a pop-up wildow comes. In this window when i click on the F4 help of TABLE field, ther are 5-6 tables coming there.
How can i add new tables like p001, and tables of custom infotypes in that F4 list. I need this otherwise i am not able to enhance the header with new custom fields.
regards

Hi Ashish
First go to TCODE PE51_CHECKTAB there add your custome IT (pls enter PNNNN in caps) save/activate
then in PE51 in ur form the custom IT should be available in dropdown
hope this is useful..

Similar Messages

  • Download the form of pe51 to a file

    Is there any program which can download the form of pe51 to a file?
    Regards

    CALL FUNCTION 'GET_PAYSLIP'
    EXPORTING
    employee_number = l_pernr
    sequence_number = seqnr
    payslip_variant = l_variant
    IMPORTING
    return = return
    p_info = pinfo
    TABLES
    p_form = pform2.
    You can work out this
    Best Regards

  • How to edit contents of Form in PE51 in  HR Module

    Dear Experts,
    I need to add some fields in Payslip through PE51 and edit some field also,pls tell me how to do it.
    Thanks n regards
    Anwar
    Edited by: Anwar Jamal on Feb 15, 2008 2:25 PM

    First find out the form name, go to SE71 tcode enter the form name in change mode, check for the field in which window they have populated and modify according to your requirement. Finally activate the form before executing it.
    Reward if useful.
    Thanks,
    Kishore

  • How to get the output of Standard HR forms in PE51

    Hi Experts,
    How to get the output of standard HR forms available in PE51 Transaction for coutry grouping 99.
    Please advice.
    Regards,
    IFF

    Hi
    Use the t code for country grouping 99....PC00_M99_CEDT - Remuneration Statement. to get the variant in tcode PC00_M99_CALC_SIMU - Simulation.
    Like this test for all the standard forms, what all are the available in PE51 for country grouping 99

  • Send HR Form (tcode Pe51) to employee email

    Hi friends,
    Is it possible to send the HR form PF01 (of the remuneration statement report RPCEDTP0) defined in tcode PE51 by email, to the employees, entering, for example, email address in infotype 0105 (communication), subtype 0010 (email)?
    I mean, with customizing (not creating a smartform, for example).
    Regards,
    Valter Oliveira.

    Hi Amit,
    Thanks for the reponse.
    Well, yes, I'm an abaper , but since I never (ever) heard about HR forms I was wondering if there is a better solution than changing the standard program (or copy to a 'Z' one).
    Without doing so, is it really not possible?
    Regards,
    Valter Oliveira.

  • Adobe form in pe51

    Hi guys,
    Is it possible to create and design a HRForm as an adobe form?
    Best regards
    Jon

    Hi,
    To create HRFORM as an adobe document use tcode HRFORMS. If you use PE51 you can get the form in PDF in ESS with features HRFOR, EDPDF and EDTIN.
    Hope it helps.
    Regards,
    Edoardo

  • Hr forms using  PE51

    Hi All ,
    I have got a requirement where i need to develop a hr form using transaction PE51,
    This is the first time i have got some thing to do with HR forms and i have no idea of what is the process of developing an HR Form using transaction PE51 .
    I have created z tables with all the fields required in the form .
    I understand that we should use transaction pe51_checktab , however i would want to know the end to end process of developing an HR form using transaction PE51 .
    Your help will be highly appreciated .
    Regards,
    Prabhakar A

    Hi Prabakr u got ur requirement completed?
    i mean Did u done with your work?Pls let me know i am aslo struct in the middle.
    Regards
    SaS

  • Regarding HR Form Editor(pe51)

    hello friends,
    i have created a hr form using transaction pe51.i don't know how to pass the data to the hr form and view the final output.should i create a abap program to pass the data to the form and to run the form.or is they any other way.please any one of u help on this.
    thanks.

    Hello,
    Go to the tab Line Layout
    Say these are the fields that you have defined
    ANZHL__BETPE__  BETRG________
    double click on the line...
    A window popups up with position information and print data
    In this click on table field and see the values using f4. Put the table name and the field name.
    Regards,
    Shekhar Kulkarni

  • Standard Forms in PE51

    Hi All,
      In PE51,I am not able to find Standard forms available in country grouping 40.
    SAP version i am using is 4.7.
    Thanks,
    RR

    hi RR
    in ECC 6 there are forms for CEDT for country Grouping 40, starting from IN01 to IN03 and than ZIN1 to ZN01 and ZP01, i have ides of 4.7 i am sorry that forms are not even there from your country grouping may be not defined or need some Patch level upgrade to find the form. can you please check the patch levels of 4.7
    good luck
    syed

  • No standard form in PE51

    Hi All,
    In PE 51 no standard form available.
    I tried from drop down but it showed below message.
    Regards
    Shafi

    Hi,
    You have to copy from country grouping 99 to country grouping 24.
    You can do this way,
    Give the CGrp:- 99
    Then select from name from drop list the click on copy where it will ask you to trarget country grouping and your custom form name which you want to keep.
    Check , it will work.
    Regards,
    Sankarsan

  • HR FORM IN PE51

    Dear All,
    I am working on country grouping 99 Payroll International for Dubai.I am across a standard form in IDES i.e YP01 and I can't view the same form in DEV. How to retrieve the same.
    Can anyone of you please help me in this issue.
    Regards
    Arun

    Hi,
    if there is no standard form for International payroll to copy and you want only your YP01 to be copied into dev then it's a BASIS consultant work.
    you can ask your basis consultant to copy the form from your client to development.
    Thanks
    Gayathri

  • Regarding Rules in HR Form Editor(PE51)

    Hi All,
    I have written this rule 02 to supress the wage type whose BETRG is 0.
    But its not working properly, Instead it is supressing all wage type irrespective of BETRG value. Can you help me out.
    Thanks in Advance
    Chandrashekhar
    Rule No Table Field Type CO value1 Conversion
    2 1 RT BETRG N EQ 0 00

    Chandrashekhar,
    If rules don't suffice your need you can also edit the customer includes &
    write your custom code to meet the desired functionality :-
    INCLUDE RPCEDDZ9.  "Data defintions for customer-modifications
    INCLUDE RPCEDSZ9.     "Form routines   for customer-modifications
    Kindly reward in case useful.
    Regards,
    Darshan Mulmule

  • Cumulation of wagtypes amount in INTB Form in PE51

    Hi Experts,
                      My requirement is to diplay every wagetype total at the end of PSA in particular payroll area.  For this i observed HINCLJN0 (Payroll Journal) will solve some extent. We copied INTB and made to ZNTB and added wagetypes into particular cumulation id and trying to disply total. But it is not displaying. It is displaying as follows
    Total Gross        555,373.00   Ee Total PF con     43,387.00
    It is not displaying wagetype wise totals. Please help.
    Regards
    KPK
    Message was edited by:
            Prashanth Konda

    Hi TS,
    There could be two ways of doing this. I am assuming that the new wage type that you want the amount to be cumulated is 9000.
    1) Before the ADDCU function call in your schema, include a new PCR that will add the amounts in the wage types that you have mentioned and create an entry in the RT table with the final amount.
    2) After the ADDCU function call, the system updates the CRT table. You can include a custom PCR that will refer to the amounts in the CRT table against each of the wage types that you have mentioned using the AMT=C nnnn command and then once all the amounts are added up, use the ADDWTC9000 to include the total amount in CRT.
    Hope this helps.
    -Akshay

  • Form Editor -PE51

    Hi Experts,
    I have to show the paid days in payslip. Plz tell me which field should i use for this.
    I am using -ve time management.
    Plz help
    regards
    tS

    Hi, the no of paid days will be captured in a wagetype. pls check which wagetype is the wagetype over there for that. then check which is the field (anzhl or betpe) that contains the value ie no. of days. u can use that field to display the no of paid days.

  • Create a new class in pe51 form layout

    Hi experts,
                   I want to create a new form  layout in pe51 for payroll register. In standard form class maximum columns is 132 but i want
    more than 300 columns for payroll register. so its possible to to create new zform class in pe51. If its possible pls guide me.
    Thanks in advance.
    Thanks & Regards
    G.Vendhan

    Hi, I am working on the same thing and created a form in PE51 using Form class CKT0 which gives me 255 columns.  I am however having problems with finding some of the fields I need.
    Thanks.
    N

Maybe you are looking for