HR Infotype : Viewing multiple entry at once?

Hi everyone,
I need to create a new infotype and in its screen, I want a grid or table control that displays every entry of this infotype for the current employee.
My guess is to create the new infotype via txn PM01 and then modify the screen and the module pool to display my grid. Then again, I would like to be able to add an entry to the grid inside the grid itself.
Any idea on the best way to do that?
Patrick
New to ABAP and HR

Hi Patrick,
Welcome to SDN.........
You can do the changes to the module pool program MPnnnn00 where nnnn is the custom infotype number and You can do PBO and PAI module code in the includes INCLUDE MPnnnn20 and INCLUDE MPnnnn30.
Thanks,
Vinay

Similar Messages

I had an older version of Firefox with a toolbar that allowed me to view multiple links at once. Is that toolbar avaiable for the current version of Firefox?

When viewing an email with multiple links, I would click an icon in the toolbar which looked like a vertical multi-colored bar and all the links would open on the same page. I cannot find this (add-on) now that I have downloaded the current version of Firefox. Is there something which works similarly available?
Some of the other icons on this tool bar were red arrows.

Maybe I just don't know how to make it work but It doesn't open all the links in at once in the same tab. I will read more about to see if I can figure this out. It is a challenge to learn new programs. I should have saved the old Firefox program which downloaded along with Firefox as I remember.

How to add multiple entries at once

Hi,
I need to define Tax Jurisdiction codes under tax on sales/purchases node and i have almost thousands of entries. Is there a way to add all at once ????
Please let me know..
Thanks,
adv

Hi,
Tax jurisdiction code can not be defined in mass in customization. You can enter entries by copy paste in a lot of say 12 entries at a time.
If the entries are very huge, you can define a temporary LSMW in dev system to do below steps:-
1. Call SM30 for view V_TTXJ
2. Click on maintain button and enter the work area of your tax procedure
3. Click on "New Entries" button"
4. Pass the enty
5. Save.
Just think whether you really need LSMW for it, as it might be one time needed. and you could also manage to upload the entries manually.
Regards,
Gaurav

View multiple clips at once

Hi,
I have two clips in the timeline, one on top of another, and I would like to see both of them playing in separate viewers at the same time. I went to the menu Windows-Arrange-Multiple Edits, but cannot get both tracks to play. Is there a way to do this? Thanks in advance
Robert.

Two ways to go about this:
1. If you have FCP 5 you can create a multiclip edit. Somewhat complex to set up but works well. Read through the steps in the manual (can be found under Help on the Menu bar)
2. Or you can scale each clip to 50% and arrange them so they are both seen in the canvas. Once the edit is complete, remove the scale attribute and the remaining material will return to full scale. (as Loyed256 noted above)
have fun.
x

How do you add a multiple entries at once to a drop-down list box?

I'm making a form for students to fill out and I want them to be able to pick from about 200 different courses. In the Field/List Items place, it would appear that you can only enter one item one at a time. I did this for 56 faculty,which took too much time, but for over 200 course titles, it would be much more convenient just to copy/paste them from an Excel spreadsheet, which is what I've tried doing. Any help or tips would be appreciated. I've attached a PDF of what I'm working on. The drop-down box is the one next to "Course." Thanks.

Hi,
The next version of LiveCycle Designer ES2 will allow user to copy and paste a long list of items into a dropdown or list box at design time. But until then your choices are limited.
Paste them one at a time;
You could set up a global variable in the (File/Form Properties) with the 200 items in the one variable. Then it would depend if your users have Acrobat/Reader v9 or earlier versions of Acrobat/Reader. John Brinkman has (several) blogs on this topic: http://blogs.adobe.com/formfeed/2009/01/populating_list_boxes.html
If you are going with v9 then you can use the setItem script. However if you want your form to be compatible with earlier versions then you will need the addItem script.
Also check out a sample by Steve Walker. http://forums.adobe.com/message/1939873#1939873 and http://forums.adobe.com/message/2038932#2038932 The first one dealt with adding user entered data onto a dropdown, which is not exactly what you are after, but it will give you direction in populating a dropdown from an array.
You would place the script in the docReady event of the dropdown, which would populate the dropdown every time the form is opened.
Good luck,
Niall

List View Showing Multiple Entries for Certain Records

I've been updating my large mp3 library with album art in order to make the list view more useful and fun to look at. With just a handful of records however I've noticed that they're getting split into multiple entries. For instance, Album X shows up twice, with one entry displaying only song 1 and the other entry displaying the rest of the songs.
I've looked hard at the tags but I don't see any difference. All the records in question were ripped using iTunes so they're not coming from different sources either.
Any thoughts would be hugely appreciated! Cheers.

Thanks again; I tried the solution this morning and it fixes the problem. I've marked the thread as such. Unfortunately it's a lot of fiddly updating, but hey, it's better than no workaround at all.

Insert data into multiple entities at once using a view object

Hi,
I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
Is this possible? And how (if it is)?

Hi,
I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
Is this possible? And how (if it is)? Peter:
This is definitely supported and tested. Please send us the exception stack trace. You must running into other problems. A few things to note:
A) You have to mark the entities as both updateable (not read-only) and not reference-only.
B) If you're not seeing an exception stack, turn on diagnostic. Here is how:
To turn on diagnostic, go to the IDE,
1. Select the project.
2. Do right mouse click and select "Project Settings..."
3. On the Settings dialog, select Configurations/Runner.
4. In the righthand side pane, you should see a textbox for "Java
Options". Please add the following JVM switch:
-Djbo.debugoutput=console
Then, rerun. The run command should include
-Djbo.debugoutput=console as in
"D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
You should now see a lot more output on the IDE's message window. Here you should see the exception stack trace.
If you invoking your app directly from command prompt, just add "-Djbo.debugoutput=console" after your "java.exe".
Thanks.
Sung

Drag multiple photos to create many blog entries at once?

I wanted to make many blog entries at once from some photos. This is trying to catch up with many entries at once, and make basically photo pages with one photo and more than just a caption (like you get with a photo page).
I did this by the usual method when I first tried iweb (try something, it works...). Then I noticed that it just assigned today's date to all the entries. I didn't want that, so I deleted all of them. Then I found out you could edit the dates...
Now, I want to recreate all those entries again, and I can't for the life of me repeat that initial 'try it, it works' of just making many blog entries all at the same time. I can't remember if it was a drag in, or what...
help!
Doesn't help that iweb goes to SBOD when I first open the media browser for 10 min...

Peter...
I have not tried this myself, so I'm not sure if this is what you did....but try this...
In iPhoto, select all the photos (Apple-click to select multiple photos) that you want to send to your blog pages. Then do you see the iWeb icon at the bottom of the iPhoto window there??? Click on it and select "publish to photoblog". See if this is what you were looking for...

View multiple video tracks at once?

Hi Guys,
How can I get the multi cam monitor to show me my 3 or 4 cameras at once? I know there is the method in which you sync clips and then do a nested sequence with enabled multi-cam operations, but can I just view the multiple clips at once on the multi monitor?
The reason I want to do this, is so I can view all the cameras and do some syncing!
Also, I have tons of stuff on my timeline which is all in different hours of the day trying to be synced. I can't really do fast syncing and then multi cam monitor.........
Currently, when i do enable multi-monitor in premiere, I can switch from video track to video track, but cannot see all my tracks at once
Thanks...
MrD

I've seen the multi cam tutorials, but I just wanna watch the videos for the sake of me syncing them and not because they are already synced...
Huh?
I tried ...but hopefully some else can under stand that and help you?

Picking the value of PBEG and PEND incase of multiple entries 2002 on a day

Hi Experts,
Our client's business requirement is to have provision handling multiple entries multiple entries of same subtype of IT 2002 on same day with different Time entries.For example one IT 2002 Styp 1 has entry 10 am to 14 pm & other entry of IT 2002 styp 1 as 14 pm to 16 pm.
In this scenario I want to have TWT with start time of 1st 2002 record i.e 10 & another TWT with end time of last 2002 record i.e. 16.
I have written a PCR as
OUTTPORIGS Origin status
    COLOP*     TIP >TOP curr.TType
P
    HRS=PBEG   Set
    ADDDB90T3 Add to day balance
    HRS=PEND   Set
    ADDDB90T4 Add to day balance
But its giving me value of 2002 start time as (1014=24) & END time (1416=30) respectively.
Since TIP will have entries with origin E & A as well with P and any entry can be 1st or last entry depending on time, I can't use VRSTFIRST & VARSTLAST.
Please suggest me how to handle such scenario through PCR. Is there a way we can make decision on From & To of TIP entries.
You can also suggest me if such need can be handled at masterdata level so that we can have just one entry
Regards
S S
Hi All,
Please also suggest me a better operation to pick the value of PBEG and PEND incase of multiple entries various subtypes of 2002 on same day.I need to compare start- end time of 2002 with 2011 entries and calculate total attendence hrs. Once again, I can't use VRSTFIRST & VRSTLAST as 1st & last TIP entry could be come from any infotype viz 2011,2002, 2001.
Regards
Sunita
Edited by: Sunita on Feb 5, 2011 10:02 AM

If you want to do it the T-SQL way, follow this article I wrote on deleting duplicates..
http://sqlsaga.com/sql-server/how-to-remove-duplicates-from-a-table-in-sql-server/
To read about what ranking functions does and how will they help you use this link..
http://sqlsaga.com/sql-server/what-is-the-difference-between-rank-dense_rank-row_number-and-ntile-in-sql-server/
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

How do I delete multiple items at once instead of one at a time?

How do I delete multiple items at once instead of one at a time? I have several duplicate items in my library and would like to delete the duplicates. Thanks!

You can select multiple items using shift to select a range and control to add or remove items from it.
Regarding duplciates, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group of identical tracks to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. This can happen, for example, if you start iTunes with a disconnected external drive, then connect it, reimport from your media folder, then restart iTunes.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background. Please take note of the warning to backup your library before deduping, whether you do so by hand or using my script, in case something goes wrong.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Multiple Entries on ipod

I imported a 4 disc CD to i tunes and then synced it to my ipod. When I go into albums on the ipod, there are multiple entries and not just the 4 cds.Every entry shows the same tracks, so in essence I have about 10 entries for each CD. Also, in another case when a single album was synced to the ipod, it appears 4 times on the ipod. Why this happening?

*HowTo: Grouping Tracks Into Albums*
Excuse the long post, but hopefully covering all the bases (that I can think of) will help you fix the other issues you are likely to run into as you try to organise your iTunes library.
*Use an album friendly view*
iTunes will let you sort music on many columns, some of which are unlikely to group albums together or put the tracks in their normal order. The most useful order for editing the library is probably *Album by Artist*. If you're not already there, select the list view and click on the column heading for Album until it reads Album by Artist.
*One cover, too many tracks*
The iPod (and iTunes to a lesser extent) conflates two or more albums with the same title, most obviously with *Greatest Hits*. On the iPod this can result in one album acting as a combination of two or more. Selecting any cover gives all the tracks of all albums with the same title. The workaround for this "Greatest Hits" bug is to give each album a unique title - I tend to go for *Album - Album Artist* as this reads clearly in the iTunes browser. Alternatively you could use the wording as it appears on the cover or append different numbers of spaces for each different album. Somewhat oddly, setting different values for Sort Album doesn't work.
*Missing Artist or Album not with others by same artist*
iTunes relies on the Gracenote CDDB database when identifying CD's. This often marks collections or anthologies of an artist's work as a compilation. In iTunes, however, the compilation flag has the logical function of grouping together tracks with the same album name, but different artists on each track, e.g. "Now That's What I Call Metal 666!". These compilations are then all grouped together at the end of cover flow. Most of us however, would expect "Greatest Hits" albums to be listed with the other albums by the same album artist. For albums which are essentially by a single album artist or group it is best to set the appropriate value for the album artist and clear the compilation flag.
*One album, too many covers*
For true compilations, where each track is by a different artist, the answer is to set the compilation flag to true and enable the iTunes preference to *Group compilations when browsing*. If the album is not a compilation however, any tracks which list guest artists may be treated as separate items. Filling in the Album Artist field is enough to link things in iTunes. Sadly, however, the iPod ignores the Album Artist field when grouping albums so this is only a partial solution. You can simply mark the entire album as a compilation which seems to be the way iTMS handles it, however that's not an ideal fix. Short of waiting for Apple to address this issue (and as far as I can tell it goes back to the 1st gen. of iPods) we need a workaround. What I do is to put any additional artist info. in square brackets after the song name. E.g. *Track \[Feat. Guest\]* and then set *Artist=Album Artist* for each track. For anthologies where the Album Artist is credited as part of another group, e.g. for Cream tracks on an Eric Clapton anthology, I use *Track \[As Group\]*. For a track where the main Album Artist doesn't receive a credit, e.g. the first track of the Slim Shady LP credited to Jeff Bass, I just set the track name to *Track \[Guest\]* while still setting the artist to the album artist. N.b. I use square brackets to indicate that this is information about the track as distinct from the song title and also use this style for Mix/Live/Bonus info.
*One album, still too many covers*
iTunes may split albums into two or more sections if some tracks from the album have different values for Artist, Album Artist, Album, No. of Discs or Part of a Compilation. Tiny differences such as trailing spaces, accented characters or variants of symbols can sometimes be quite hard to spot. The iPod is also more sensitive to case variations and may split or reorder an album that looks okay in iTunes. Normally overtyping the desired value for each shared field will complete the grouping of the album into one entity. Occasionally, however, this method seems to fail. When this happens I've found that you can force every field to update properly by adding some extra text - e.g. a trailing X, which once applied seems to complete the joining of the tracks into one album. Once this has happened the extra data can be removed and the album should remain properly grouped.
*Tried that, there are STILL too many covers!*
The Sort Artist, Sort Album & Sort Album Artist fields can be used to override the normal sort order. For example iTunes automatically drops leading articles (a/an/the) so "The Beatles" are arranged under "B" instead of "T". Occasionally different tracks from the same album can have different values in these sort fields which can also break up the grouping. Making the sort columns visible in iTunes can help with spotting & correcting such problems.
*One cover for multi-disc album*
Multi-disc albums are often listed as *Album (CD1)* for CD 1, *Album (CD2)* for CD 2 etc. To display these properly using just one cover, each disc should have the correct *Disc X of Y* values set, and then the entire album should be given the single title Album. Being somewhat obsessive I also renumber the tracks sequentially, working backwards from the last track (so that no two tracks ever have the same number) until I reach disc 1. BTW You can still give the individual discs different artwork should it be relevant so that the correct artwork will be displayed as the album progresses.
*Tracks out of sequence*
Check that all tracks have the same/correct disc no. For a single disc album this should be either blank (my preference) or 1 of 1. iTunes will sort tracks with a disc no. of 1 before those that are blank. Just for fun the iPod sorts them the other way around. Consistency is the key. In addition ensure that the Sort Artist, Sort Album Artist & Sort Album fields are the same across all tracks.
*One artist, many names*
With some artists, particularly classical composers, you should be aware of alternative representations of their names. E.g. 2Pac vs. Tupac. The menus will work best if for each artist you standardise on just one form of their name. E.g. make a choice between Mozart, W.A. Mozart or Wolfgang Amadeus Mozart, and then apply it consistently. For classical music I tend also to use the Composer as the Artist & Album Artist and either discard the performer details or place these into the Comments field. The Sort Artist/Sort Album Artist fields can group alternate forms in iTunes but these will break up again on the iPod. It is best therefore to use Artist & Album Artist consistently so the name is shown the way that you want and Sort Artist & Sort Album Artist to control where it is displayed.
tt2

HT4528 Calendar under IOS7.0.2 has been changed. does not work the same. what happened to LIST mode (multiple entries being displayed in list format) or am i doing something wrong?

I got use to using Calendar app where multiple entries are stacked under IOS6. Under iOS7.0.2 I enter a new appointment and after the entry I can not find the new appointment after i click on done. Am I doing something incorrect HELP!

The list view does not appear to be among the "standard views" for the Calendar app in iOS 7.0.x. You can still get the list view by going to the day view and hitting the search button (magnifying glass icon).

Delete multiple duplicates at once without selecting one at a time...

I know that you can view duplicates and then select songs one at a time to delete. Because show duplicates shows both the duplicate file and the original you need to select one duplicate and skip one for the original file for each duplicate song. The problem is I have 18000 songs so going through the duplicates one at a time like this will take way too long. How can I delete all of these duplicates without clicking on all of them one at a time?

You can select multiple items using shift to select a range and control to add or remove items from it.
Regarding duplciates, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group of identical tracks to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. This can happen, for example, if you start iTunes with a disconnected external drive, then connect it, reimport from your media folder, then restart iTunes.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background. Please take note of the warning to backup your library before deduping, whether you do so by hand or using my script, in case something goes wrong.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Is there a way I can view two pages at once on Adobe for Windows 8 Metro?

I'm not talking about the one document. I'm talking about multiple documents. Say I need to view two documents at once, side-by-side while I study (one is a formula sheet and the other is a question sheet).

No. Adobe Reader Touch is a Windows Store app with "modern" UI. None of Windows Store apps with "modern" UI can open two windows side-by-side. That's the Windows 8/RT application design decision that Microsoft has made.
If you want multiple documents/windows for the same app, your only choice is to use a desktop app (e.g. Adobe Reader XI) in the Windows 8 desktop environment.

HR Infotype : Viewing multiple entry at once?

Similar Messages

Maybe you are looking for