HR Report for viewing data transferred through CO1P transaction

Hi,
I have query here about HR data transfer which we do through CO1P transaction. How we can view these data transferred through CO1P in HR module i.e. any transaction or report is available from HR side which can give fair idea values which are passed through PP are visible in HR report / table.
Your precious reply in this matter will be highly appreciated.
Thanks in advance.
Regards,
Tejas Pujara

Hi Friends,
I gone through EVHR and another table LSHR as well which is saving entries confirmation timings i.e. time events and time tickets. But to my surprise, respective time fields entries are shown with 0 values in both tables. I cross checked with AUFNR that AFRU entries contain values for standard values i.e. set up , machine etc confirmed properly and updated in AFRU.
But same AUFNR values transferred through CO1P are not updated with those values in HR tables.
Any body can through light on this,
Alternately, let me know in case I need to post this in HCM forum. Kindly suggest me exact where I need to post this since I found so many sub-categories under HCM section of SCN.
Thanks & Regards,
Tejas Pujara

Similar Messages

  • Report for viewing Sales order no against delivery date & actual GI date

    Hi Experts,
    Is there any report for viewing Sales order no against delivery date & *actual GI date*
    Because in VL06F , i can only able to get planned GI.
    Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
    Regards,
    Sujit S.

    dear Hrishi,
    i followed your suggestion, but couldn't get desired results,
    here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
    thanks for your valuable reply.
    @ G. Lakshmipathi ;-
    i think i will need to develop z-report for fetching the data from the tables
    VBAK (to get sale order reference) and
    LIKP (to get delivery and actual GI date)
    thanks for your reply,
    Regards,
    Sujit

  • How to measure data transferred through XI in a day (XI 7.0)

    Is there any transaction or T code which will help me determine data transferred through XI in a day or any period of time?
    Similarly how can I determine  the uptime for XI?

    Hi,
    The amount you see in RWB Performance Monitoring is in bytes, so just divide by 1,000,000 (1024 x 1024 to be exact) to get its MB equivalent or 1,000,000,000 (1024 x 1024 x 1024) for its GB equivalent.
    Hope this helps,
    Edited by: Mark Dihiansan on Jul 31, 2009 8:09 AM

  • Configuring reports for express data(2)

    We are in the process of configuring reports for express data.
    In this regard we have done the following steps:
    1.In the machine A reports 9i developer suite release 2 has been installed on Windows 2000
    Professional Edition with the following utilities - (a) Oracle Reports Builder and runtime
    support,(b) Oracle Express Connection Editor and (c) Oracle SNAPI are installed.
    2.Express Server 6.3.4 has been installed on Windows 2000 Professional Edition in machine
    B with Remote Operation SNAPI 6.3.4.0.
    3.Oracle 8i has been installed on Solaris and the Express Support Administrator and User
    Accounts have created and the xrb_admin.sql and xrb_user.sql have been run through the
    respective accounts.
    Queries
    1.We have still not run the Express Oracle8 External Procedures on the Oracle8
    gateway. Should we run this in order to get Express Data in Reports9i incase of the General
    Maintenance where the Express data fetches the data from the Oracle8 gateway on the fly
    ?We are also not able find the Express Oracle8 External Procedures downloads after
    extensive search on OTN.Please guide as to where can we find the downloads.
    2.What are the configurations settings that have to be done in the tnsnames.ora,sqlnet.ora
    and listener.ora ?

    Ramakrishnan,
    Express connectivity for Oracle9i Reports is installed by default as one of your pluggable data sources and it communicated directly with Express, which is a large change over Reports 6i in which you needed an Oracle8i database to talk to the Express database.
    For Oracle9i Reports, you need to have:
    1 - Express installed 6.3 or later.
    2 - Oracle9i Reports
    3 - The connection dialog (which is documented in the release notes if you need to set this up)
    That's it. When you click on the Express PDS to access the data, it will read the connection dialog information and you need to supply the logon information to the Express database.
    You should also look at the help topic for Express and you will find all the necessary documentation on configuring Reports and how to connect.
    Regards,
    The Oracle Reports Team jls

  • I need the Log Report for the Data which i am uploading from SAP R/3.

    Hi All,
    I am BI 7.0 Platform with Support Patch 20.
    I need the Log Report for the Data which i am uploading from SAP R/3.
    I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item.   In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
    I capture the FS item from the Z table then update this FS item to Infobject FS item.
    Now i  need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
    Please suggest.
    Regards
    nilesh

    Hi.
    Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
    In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
    Regards
    Jacob

  • AP Invoice Aging Report for past date

    hi guys,
    I am running R12.
    my requirement is to run AP invoice aging report for past dates (same like AP Trial Balance Report), but the seeded invoice aging report has no option to do so.
    would appreciate some help
    thanks in advance
    Ravi

    Hi Senthil,
    I am running R12.
    my requirement is to run AP invoice aging report for past dates (same like AP Trial Balance Report
    if u have any solution to this , please suggest me how to resolve this requierement.
    thanks in advance
    Ravi
    mail:[email protected]

  • Want to schedule WebI report for End date of Prior Month

    Hello Experts,
    We have WebI report created on top of Bex Query, We have key date as prompt for the report. Can we schedule the webi report for key date as last date of prior month, so if current month is February, my key date should be Jan 30 2011. I am not sure if this is possible?
    Thanks,
    Ravi

    You need to apply two FM to get the end day of the month.
    First you need to apply FM MONTHS_PLUS_DETERMINE. This will give you the date after 3 months.
                CALL FUNCTION 'MONTH_PLUS_DETERMINE'
                  EXPORTING
                    MONTHS        = 3   " << for 3 months
                    OLDDATE       = l_start_Date   " << 12/01/2007
                 IMPORTING
                   NEWDATE       = l_3_Date. " << 02/01/2008
    Then call the FM RP_LAST_DAY_OF_MONTHS . this will give you the end date of the month
      CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
        EXPORTING
          day_in            = l_3_Date  " << 02/01/2008
        IMPORTING
          last_day_of_month = l_3_Date  " < 02/29/2008
        EXCEPTIONS
          day_in_no_date    = 1
          OTHERS            = 2.
    Call both FMs again to get your another date(after 4 months).
    Regards,
    Naimesh Patel

  • Report for viewing credit limit block released documents

    Hello All,
    Our client's requirement- credit limit check to be carried out and authorised persons can release the blocked orders.
    But is there any report at month end to see how many documents were released and who released them  Is there any standard report for viewing these or ABAP has to develop them?  VKM2 transaction- released SD Documents would not show any released documents once billing is done i.e, once the sales documents is released it cannot be known who released it and when, how to track this?. so what can be the solution for this? Please suggest
    Regards,
    RAJ

    Dear Raja,
    Use VKM4 t code.
    You can see both credit released sales orders and deliveries.
    Put Overall credit status as D.
    You can see how much value was released, when it was released. But with which user id it was released you cant see it.
    Regards
    Abhilash

  • How to take unreconcilled transactions report for a date range ?

    hi all,
    How to take unreconcilled transactions report for a
    data range ?
    we have taken unreconcilled transactons from
    external reconcillation using filter option mentioning
    range of dates,But when we take print out using PLD,
    it showing unreconcilled transactions for all dates.
    But our client requires it as a standard report from SAP ?
    Our client is using SAP B1 2005B PL39.
    Jeyakanthan

    Hi
    Financials -> Financial Reports -> Accounting -> General Ledger.
    In the 'Display' dropdown select, 'Unreconciled' .
    Hope this should help you.

  • Provide simple example for Arbitrary data sending through NI4551(DSA)

    We Converted NI-DSA function palette
    in LabVIEW under Application
    Examples>>Advanced>>Arbitrary Output Example.
    But, We not exactly getting arbitrary wave. Our arbitrary data is correct. I think there is a problem with FFT settings. So Please Provide simple example for Arbitrary data sending through NI4551(DSA)

    Hello Sateesh!
    First, what versions of LabVIEW and NI-DSA are you using.  I have been searching around for the example you are refering too and I am not able to find it.  Are you creating and arb. wave in the frequency domain and then performing an FFT to get it to the time domain?  Next, remember your wave will only be as exact as the AO specs. of the hardware...
    The output conversions occur simultaneously at software-programmable rates from 1.25 to 51.2 kS/s in increments of 47.684 µS/s. The analog output circuitry uses eight-times oversampling interpolators with 64-times oversampling delta-sigma modulators to generate high-quality signals. Software-programmable attenuation of 0, -20, or -40 dB is available on the output channels. The PCI-4451 has excellent amplitude flatness of ±0.2 dB within DC to 23 kHz, and a THD of -90 dB at 1 kHz.
    Now, as far as obtaining other examples If you use the LabVIEW example finder and goto Hardware Input and Output>>Traditional DAQ>>Analog Output.  I would also in the lower right hand corner of the Example Finder select your 4451 this will show you all examples that work with your hardware.  I hope this helps a little but please give me more details we will go from there.   Have a great day!
    Allan S.
    National Instruments

  • Configuring reports for express data

    I am trying to configure reports for express data and in this regard I have done the following :
    1.Machine A having reports 9i Developer suite Release 2 and Pluggable Express Connection Editor
    installed on Windows 2000 professional.
    2.Machine B having which Express Server 6.3.4 installed on Windows 2000 professional.
    3.In Machine A created user OESDBA with Administrator privilige.
    In the reports I am able to connect to the Express Server and attach the database and choose the
    measure.Once all the other steps are done I am able to print the data on the reports.
    But if I use a parameter form in which I give the HOST,USER and PASSWORD then substitute the
    same in the express_server parameter value in the AFTER PARAMETER FORM trigger block then
    the report gives an error saying that
    Express query contains incorrect,missing or damaged information.
    How to solve this error ?
    Can any one help me out.

    Ramakrishnan,
    Express connectivity for Oracle9i Reports is installed by default as one of your pluggable data sources and it communicated directly with Express, which is a large change over Reports 6i in which you needed an Oracle8i database to talk to the Express database.
    For Oracle9i Reports, you need to have:
    1 - Express installed 6.3 or later.
    2 - Oracle9i Reports
    3 - The connection dialog (which is documented in the release notes if you need to set this up)
    That's it. When you click on the Express PDS to access the data, it will read the connection dialog information and you need to supply the logon information to the Express database.
    You should also look at the help topic for Express and you will find all the necessary documentation on configuring Reports and how to connect.
    Regards,
    The Oracle Reports Team jls

  • Classical Report for linking/applying the goods receipts transaction

    Classical Report for linking/applying the goods receipts transaction quantities against oldest schedule line item dates and then downloading the file to Excel.
    o        Classical Interactive Reports for calculating average Day Payable Outstanding. Option 1) in summary by company code, vendor, currency. (w/ DPO calc) Option 2) in detail (w/o DPO calc) Option 3) special summary by vendor and roughly convert different currency into one currency of choice, using current YEARLY rate.
    thow to do these objects
    plz assist me
    and how to transfer the data from from one server to other like 3.1 to 5.0
    plz assist me
    Edited by: Alvaro Tejada Galindo on Feb 21, 2008 5:28 PM

    Hi,
    You can use Call Transcation tcode
    for calling the transaction u can pass values to the transaction by using SET PARAMETER ID and GET PARAMETER ID
    technique.
    For downloading use function module LIST_DOWNLOAD
    or GUI_DOWNLOAD.

  • Report to view all the Roles and Transactions assinged to a particular user

    Hi,
    I need to develop a report to view all the Roles and Transactions assinged to a particular user along with the Authorization values. So, if provide the Username, the report should be able to give Roles, Transaction Codes and the fields and thier authorization values for that TCodes..
    Regards,
    Sreenivas Raju

    Try this FM once - SUSR_USERS_LIST_ALV . It provides a list with Roles, Profiles, and also a detail button to check the authorization values etc.
    Also try this FM - SUSR_USER_DISPLAY_WITH_AUTHS, SUSR_USER_AUTH_FOR_OBJ_GET , SUSR_USER_DISPLAY_WITH_S_TCODE

  • Error while pulling report for particular dates

    hi
    i am trying to fetch report for the first quarter in incident management --> incident analyst i got an error the below error:
    On in-depth analysis i found out that this error occurs in the month Jan and Feb 2014 hence i am not able to pull the complete report of quarter. Kindly help me to resolve this issue.
    Date: 14-04-2014 15:13:11
    Application: System Center Service Manager Console
    Application Version: 7.0.6555.0
    Severity: Error
    Message: An error has occurred during report processing.
    System.Exception: An error has occurred during report processing. ---> System.Exception: Query execution failed for dataset 'Data_Incidents'. ---> System.Exception: For more information about this error navigate to the report server on the local server
    machine, or enable remote errors
       --- End of inner exception stack trace ---
       --- End of inner exception stack trace ---
       at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
    System.Exception: Query execution failed for dataset 'Data_Incidents'. ---> System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors
       --- End of inner exception stack trace ---
    System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors
    Micheal Nishit

    Hi All,
    Any pointers or suggestions for this issue ??
    Is there a setting/option avialable in CMC which could resolve these errors.
    Or, user has to login once to infoview in all circumstances to avoid these errors.
    Thanks,
    Chandra

  • Report for a date range

    Hi,
    My end user requires me to develop a report that will accept the following parameters:
    Customer Code : ABC
    From Period : 01-Jan-2005
    To Period : 31-Dec-2010
    Output must be as follows :
    Customer Jan-05 Feb-05 Mar-05 Apr-05 May-05 ......................................Dec-10 Total Order
    Code
    ABC 10 15 5 20 10 ...................................... 15 X value
    I have told my end user that it is not possible to create an Oracle report that will give data for any period range that the user specifies. First the number of columns for the date range must be fixed like say at a time only data for 12 months will be displayed in the report. Then they can run the report for any year and the parameter has to be
    Customer Code : ABC
    Year :2005
    The output will be :
    Customer Jan-05 Feb-05 Mar-05 Apr-05 May-05 ......................................Dec-05 Total Order
    Code
    ABC 10 15 5 20 10 ...................................... 15 X value
    Am I right or wrong ? Please advise. This is very urgent.

    I don't see why this should not be possible.
    Remember that you can have repeating frames in every direction (ie. right and down) and can combine these.
    What I would do is look for (or create) a type of calender-table where I could select the date values from (ie. JAN 05) qualified by the from- and to-Parameters (aka query1),
    then have a second, dependent query which uses the date from the calender (aka query2).
    Then stack a down repeating frame for query2 into the right repeating frame for query1 and you should be almost there... Use the date from query1 as heading...
    Cheers,
    Jens Rettig

Maybe you are looking for