HRMD_A07 idoc inbound

Hello,
I'm going to be using HRMD_A07 to load data into SAP. Do I need a separate idoc for each infotype I want to insert/change? From what I tested it looks like this is true.
When I look at the idoc documentation it lists only one E1PITYP segment and then all the infotype segments, E1P0000, E1P0001, E1P0002, etc.
When I create the idoc in that format it does not load.
Do I have to create individual idocs for each E1P0000, E1P0001, etc segment for one employee?
Such as:
idoc 1 for employee 123
E1PLOGI
E1PITYP
E1P0000
idoc 2 for employee 123
E1PLOGI
EI1PITYP
E1P0001
Thanks!
Cathy

Similar Messages

IDoc - Inbound delivery

Hi Experts,
Inbound EDI message order acknowledgments:
When we cancel a purchase order item with IDoc message 'ORDRSP', this leads to an error message in the IDoc inbound processing.
There is note 890812, but i guess it is till release 5.0
Can anybody please guide me for the solution.
Thanks,
Sourabh Kothari

Hi Experts,
When we tested for the note, it is giving the status that this cannot be implemented.
Could any one give me the alternate solution for the IDoc inbound processing.
When the vendor sends the quantity 0 against any of the line items, the other line items are also not posted. There error message is ME794.
As per the above note implementing the corrections & when the item is deleted in PO, again processing the idoc would be successful. But the note is not valid for ECC 6.0
Please guide.
Thanks,
Sourabh Kothari

IDoc Inbound Business Connector

Hello
I am trying to send an inbound IDoc to SAP via Business Connector. This is shortly to be replaced by XI.
The flow in Business Connector creates a routing rule which is blank because it is not finding the control information from the IDoc I believe.
I think I am missing a step in my flow.
Currently the flow is
document to record
Transform hierarchy to Flat.
Map ( mapping the fields into the IDoc)
Record to Idoc
Inbound process
The inbound process always fails because it doesnt recognise the message type, sender etc.
This is all the idoc and in record to Idoc this is an input with an output of Idoc list which is passed to the inbound process.
However Idoclist I believe doesn't seem to contain any data.
I think a step is missing can anyone help??
Thanks

Hi,
Please see this.
Hi,
BC adapter can be used when you want to communicate to a existing interface on Business Connector. If you are talking to SAP, you use RFC / IDOC adapters.
The SAP Business Connector (BC) is used in a large number of SAP production environments. SAP Business Connector will probably be gradually phased out and replaced by SAP XI technology. For the short term SAP Business connector and SAP XI will inevitably continue to coexist in companies IT landscapes.
See Below links
Integrating your SAP Business Connector with SAP XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/96ed2129-0b01-0010-2e91-c45e1fad0d03
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4f27ad80-0c01-0010-f8b8-c5e153a16ca1
Before XI
Before XI
webMethods Integration Server Vs. SAP Business Connector 4.7 (BC)
Choose the Right Adapter to integrate with SAP systems
/people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
Thanks
akshay

Need IDOC inbound and outbound programs

hi,
i am new to xi.
i want IDOCs , inbound and outbound / function module programs for PURCHASE ORDER
and GOODS RECEIPT.
ex: BD10 for material master (matmas01).
thanks and regards
v ijender

for purchase order.
ORDERS / ORDERS04
ORDCHG / ORDERS04
ORDRSP / ORDERS04
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
and also check the below link
http://www.erpgenie.com/sapedi/message_types_masterdata.htm
regards
kummari

HRMD_A07 Idoc to update InfoType 0014 does not delimit existing PA0014 rec

In ECC 6.0, we are using HRMD_A07 Idoc to update infotype 0014 using update data received from a third party application. In XI, I am creating the Idoc with Update Code "U" with E1PLOGI, E1PITYP and E1P0014 segments. E1P0014 holds the data for the latest record.
If I directly pass the Idoc thru ALE layer, It creates records for the new date range on E1P0014 segment, but does not delimit the previous record by changing its end date. This results in two records in PA0014 with end date of 12/31/9999 - which is wrong.
I also tried using a wrapper FM to create additional segments in the Idoc representing the existing record in PA0014, with the end date being delimited to incoming record's beg. date minus 1.
This also results in just creating two additional records in PA0014 corresponding to the two segments in Idoc while existing record in PA0014 stays intact resulting in two records with end date 12/31/9999.
I also experimented with setting the lock indicator (PA0014-SPRPS) but that also does not result in delimiting the existing record.
Am I missing something? Is there a piece of config that controls this?
Regards,
The time constraint on 0014 is "2"

Hi Jon and Ashish,
I too am facing the same issue that the new IDOC is not delimiting the previous record.
Can you explain how did u get over you issue.
I'm maintaining the same dates in E1PITYP and in E1P0014.
Thanks,
Jilly

*IDOC INBOUND ( NON SAP system - SAP system )*

I am transferring IDOC INBOUND ( NON SAP system ->> SAP system ) by calling SAP standard funtc module IDOC_INBOUND_SINGLE using SAP JCo.
In which I am passing all necessary information in Control Record regarding sender and receiver port/IDOC/segment etc.
BUT help me to clarify my doubt that if i am calling a function and i am able to access SAP FM, then why i have to specify the SAP port/RFC connection at RECEIVER end in WE21.
Whats the Significance if i am calling the FM from same SAP system and configuring the port explicitly in WE21.*
If i don't Specify in we02 i am getting error as EDI : RECEIVER PORT in CONTROL RECORD is INVALID

Dear Sree,
For Basic understanding of IDOC read : saptechnical - Step-by Step ALE IDOC guide ( all necessary TCodes available here )
Kindly let me know your data flow .
In short :
As per my scenario the data flow is from non SAP to SAP i,.e. Inbound processing.
At my non SAP i am calling SAP standard function IDOC_INBOUND_SINGLE using SAP Jco 2.1.
You have to fill all Control Structure EDI_DC40 ( port etc. ) and Table parameter EDI_DD40 ( segment etc. )
Read IDOC status and error in WE02.
Goodluck.
- Aakash

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

Need help for IDOC inbound function module !

Hi guys please help me to create a IDOC inbound function module.
What are the parameters and tables.
How to write the code.
What it does.
Please send me one inbound func module code if possuble
Thanks

Hi,
You need to create an inbound function module. Then define the process code in transaction we42 and attach the function module to this process code.
In the function module you create you need to define tables of types EDIDC (Control record (IDoc)), EDIDD (Data record (IDoc)) and BDIDOCSTAT (ALE IDoc status (subset of all IDoc status fields)).
Regards,
Soumya.

IDOC Inbound and Outbound

Please let me know How to handle IDOC inbound and Outbound preferably with example. I am new to it.

hi,
your question is very broad,
start reading continue from there...
<a href="http://help.sap.com/saphelp_46c/helpdata/en/19/3cf334c20ccc52e10000009b38f83b/frameset.htm">Doc Interface: EDI Application Scenarios (BC-SRV-EDI)</a>
<a href="http://help.sap.com/saphelp_46c/helpdata/en/dc/6b8a4943d711d1893e0000e8323c4f/frameset.htm">IDoc Interface / Electronic Data Interchange (BC-SRV-EDI)</a>
An example:
inter company invoiceing:
the SD invoice has an output type (INVOICE01) that sends an Idoc that creates the mm invoice (invoice verification)
for more data see the links above
good luck

LSMW idoc Inbound Processing settings

Hi,
We have done LSMW with BAPI method to create Bank master.
In Idoc Inbound Processing settings -
We created partner type as 'B' i.e, for BANK
While creating Partner Number it is not allowing to create Partner Number. The error is "Enter a permissible partner number"
Please let me know what would be the problem.
Regards,
Hari
Edited by: Bhatlapenumarthy Hari Krishna on Sep 12, 2008 9:31 AM

Hi,
Use patner type as US only and LSMW as Patner number.
this will surely solve your problem .
plz do this way :
The first requirement is a file port for the file transfer. If required, create a port of the file type via Maintain ports. To do this, position the cursor on "File" and press Create. You should be in change mode. SAP recommends:
Port: LSMW
Name: Legacy System Migration Workbench
Version: 3 (IDoc record types SAP Release 4.x)
Outbound file Please enter a (dummy) physical directory and a file name, i.e. u2018filelsmwu2019 ·
As an addition, you can specify a tRFC port. This port is required, if you do not want to create a file during data conversion but submit the data in packages directly to function module IDoc_Inbound_Asynchronous.
SAP recommends:
Port: assigned by the system
Version: 3 (IDoc record types SAP Release 4.x)
RFC destination: Name of R/3 System
Name of port: Legacy System Migration Workbench.
Then the partner type should be defined or selected. SAP recommends:
Partner type: "US" (User)
As of release 4.5A, this partner type is available in the standard system. Up to release 4.0B inclusive, this partner type is not available in the standard program and should be added. SAP recommends:
Partner type: Create US
Report name: /SAPDMC/SAP_LSMW_PARTNERTYPES
Form routine: READ_USER
Short description: any.
Finally a partner number should be defined or selected. SAP recommends:
Partner number: LSMW
Partner type: US
Partner status: A (active)
Type: US
Language: DE or EN
Person in charge: Your user ID.
Activate IDoc inbound processing
reference : help.sap
thanx.
Edited by: Dhanashri Pawar on Sep 12, 2008 7:10 AM

IDoc Inbound Processing for CREMDM & DEBMDM

Hi experts,
I'd like to gather some feedback from you regarding the topic ERP IDoc Inbound Processing for CREMDM & DEBMDM. As you all know, there's currently no option to directly process CREMDM/DEBMDM IDocs in ERP. Currently you have to use PI for splitting the CREMDM/DEBMDM message into its related ADRMAS and CREMAS/DEBMAS IDocs.
My areas of interest are:
1) How satisfied are you with the current situation? Does the split work? Are there issues or problems in the current message handling? What are the Pro's and Con's from your point of view?
2) What would be the requirements for a CREMDM/DEBMDM handler? What would you expect? Maybe you have implemented something similar on project basis and could post some feedback?
One painpoint I'd see with a CREMDM/DEBMDM inbound is that you'll lose the IDoc Monitoring capabilities. The message split allows a single record tracing in the IDoc Monitor (as there is a 1:1 relation between IDocs and records). This changes for the mass processing. The monitor would display only the status of the IDoc and you'd need some other monitoring capabilities to check the results on record level. What are your thoughts about that? Is the monitoring important? Would the application log be a feasible solution for that challenge?
Additional comments are welcome, of course.
Best regards
Michael
PS: @ Matt, please contact me by mail. thanks.

Hello ,
Here are some other pain areas regarding the message split :
1. Complicated monitoring proess & reprocessing error idocs : We have to monitor ADRMAS & CREMAS or ADRMAS & DEBMAS during inbound processing. Also we could not find any best practices to reprocess error idocs. E.g. If ADRMAS fails & CREMAS succeeds what is the impact . Also the impact if it is reveresed. We know for sure that if CREMAS fails , vendor will not be created / updated. But we could not find specific pointers for ADRMAS failures.
2. It is a tedious process to link CREMAS with corresponding ADRMAS idoc specially when SAP maintains internal number range for vendors.
3 . The process is complicated if you are managing customer or vendor contact information with contact address . We could succesfully implement the integration but it took us a while to reach end-point.
4. Splitting really does not seem to support if ERP maintains internal number range.
5. Another major issue we observed is , if ADRMAS is under process & corresponding DEBMAS or CREMAS is posted , it fails raising the message that Account is locked. Default serialization does work in ERP system . But overlap of few microseconds also cause this error.
Hope this helps !!
Please let me know if you need any other specific details since we have used MDM - ECC integration using PI to its maximum extent .
Regards
Yogesh

Idoc inbound problem

Hi Friends,
I am facing a problem in IDOC inbound processing.
My scenario in SALES PER RECEIPT - POS like this: I have to read XML (From PC) file and i have to post it.
I am using Idoc - WPUBON01. After reading XML file i used Function module to distribute - MASTER_IDOC_DSTRIBUTE.
In we02 i checked Idoc is generating but status showing 29.
So run the report RSEOUT00. But i am getting message like 'No idoc is selected for processing'.
Plz help me what i have to do. I created port also.
Regards,
P. Kumar.

hi kumar,
if u get status 29-error in ale service- check partner profile first.if it exists check ur logic where u modify control record,else create partner profile and restart again.
Reward if usful.
Thanks,
Srikanth.A

IDOC inbound .

Hi Gurus ,
i am working on IDOC Inbound process , actually it has to update picking net weight and total weight , in am using stadard message type 'SHPCON' , internally this uses the function module 'WS_DELIVERY_UPDATE_2' , but after IDOC has been posted when i search in the delivery these changes are not found.
PLease help me on this ASAP.
Thanks ,
Rajeshwar.

Hi,
Is the issue fixed ?
Iam also facing the same problem
if fixed , please inform
Thanks in advance ,
Sarath P

ALE IDOC Inbound processing using IDOC_INPUT_ORDERS

Hi experts,
I am stuck up with IDOC inbound processing.
Can you please let me know about the process in Receiving Purchase Order from the customer system and creating Sales Order in the SAP system? using FM IDOC_INPUT_ORDERS. I have an Idea about WE20, NACE etc.
Can you please explain me about the process on how to go about it?
Kind regards,
Shiva.

Hi,
I have moved this thread from [ABAP, General Forum |ABAP Development; to [Data Transfers Forum|ABAP Connectivity;.
The forum Data Transfer is the place to discuss LSMW, ALE, BDC, Data Transfer Techniques, Batch Data Communication, Legacy System Migration Workbench, Application Link Enabling, IDOCs, BAPIs.
Please, the next time check the most appropriated forum category before posting. Thus you have more chance to have your question answered !
Best Regards.
Marcelo Ramos

IDOC inbound processing ( Function module Rquired )

Hi,
I am working on IDOC inbound, I am looking for a standard FM for Production order confirmation which i need to assign in WE57 along with the standard Message type(Production order confirmation).
Could you please let me know where i can get the standard inbound function modules for the standard idoc types,
for eg: IDOC_INPUT_ORDERS for sales order.
Thanks.
Krishnakumar

Hi,
Go to WE42 for inbound processing codes and WE41 for outbound.
OR
We have WE19 which is a test tool for IDOC processing.
Provide the IDOC number then press F8, then in the next screen , you will have inbound function module.
Click that button. Then enter the text in search criteria.
Then you can get related function module.
Reward points if helpful.
Thanks and Regards

HRMD_A07 idoc inbound

Similar Messages

Maybe you are looking for