HsvWebSessionWSP.dll possible dependencies for regsrv32 sucess

I am trying to register the dll in regsrv32
regsvr32 command E: \ Oracle \ Middleware \ EPMSystem11R1 \ products \ FinancialManagement \ WebServices \ HsvWebSessionWSP.dll
the resulto is an error:
The module
E: \ Oracle \ Middleware \ EPMSystem11R1 \ products \ FinancialManagement \ WebServices \ HsvWebSessionWSP.dll failed to load.
Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent, DLL files.
The specified module could not be found.
I wonder what are the dependencies of this dll?
Thank you,

dear
the command
C:\>regsvr32 E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\WebServices\HsvWebSessionWSP.dll
the resulto is an error:
The module
E: \ Oracle \ Middleware \ EPMSystem11R1 \ products \ FinancialManagement \ WebServices \ HsvWebSessionWSP.dll failed to load.
Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent, DLL files.
The specified module could not be found.
Unfortunately I can not find which other DLLs need to be registered.
You know tell?

Similar Messages

How is ist possible to maintain the time dependencies for Abap Privileges?

How is ist possible to maintain the time dependencies for Abap Privileges?
In our Installation of SAP IDM 7.0 SP2 Patch 4 the time dependencies of Abap Roles are imported in the IC by Initial loads Jobs. How can the see / change the dependencies in our IDM Workflow UI? Presently nothing jet is shown, no Attribute is predefined..
Can anybody give us a hint?
Thank you in advance !!

If you click VIEW/SHOW PLAYHEAD INFO, you will see the timecodes as you scrub. (Consumer timecodes, not pro timecodes).
This works if you imported your footage from a camcorder, either miniDV or AVCHD.
However, if you have imported an analog file, or saved a DV file to a QuickTime File, you may just see the file creation date in VIEW PLAYHEAD.
However, there is a trick to getting even these clips to display timecodes if you know the start time.
First pick a clip. Make a copy and drag it to your desktop, just so you don't lose anything.
Rename this copy in the following format clip-yyyy-mm-dd hh;mm;ss.current file extension.
For example, clip-2001-07-14 09;30;45.mov (note the space between the day and the hour)
This would be a .mov clip that starts with the first frame at July 14, 2001 at 9:30:45 AM
Then import the clip into iMovie. You now have timecodes at the playhead.

PrintWindow api with possible solution for capture screenshot Google Chrome window

Hi,
as all you know, PrintWindow api give us a black image when us want a capture screenshot of Google Chrome window. So, a friend said me that a possible solution for this problem is:
Reduce Google Chrome window for -1px in both sides and after this, reset to original size. And so, will repaint again.
Based on code below, someone could help me make this? sincerely I don't know where begin.
[DllImport("user32.dll", SetLastError = true)]
static extern IntPtr FindWindow(string lpClassName, string lpWindowName);
[DllImport("user32.dll", SetLastError = true)]
static extern IntPtr FindWindowEx(IntPtr hwndParent, IntPtr hwndChildAfter, string lpszClass, string lpszWindow);
[DllImport("user32.dll")]
private static extern IntPtr GetDC(IntPtr WindowHandle);
[DllImport("user32.dll")]
private static extern void ReleaseDC(IntPtr WindowHandle, IntPtr DC);
[DllImport("user32.dll")]
private static extern IntPtr GetWindowRect(IntPtr WindowHandle, ref Rect rect);
[DllImport("User32.dll", SetLastError = true)]
[return: MarshalAs(UnmanagedType.Bool)]
static extern bool PrintWindow(IntPtr hwnd, IntPtr hDC, uint nFlags);
[StructLayout(LayoutKind.Sequential)]
private struct Rect
public int Left;
public int Top;
public int Right;
public int Bottom;
public static Bitmap Capture(IntPtr handle)
Rect rect = new Rect();
GetWindowRect(handle, ref rect);
Bitmap Bmp = new Bitmap(rect.Right - rect.Left, rect.Bottom - rect.Top);
Graphics memoryGraphics = Graphics.FromImage(Bmp);
IntPtr dc = memoryGraphics.GetHdc();
bool success = PrintWindow(handle, dc, 0);
memoryGraphics.ReleaseHdc(dc);
return Bmp;
private void button1_Click(object sender, EventArgs e)
IntPtr WindowHandle = FindWindowEx(IntPtr.Zero, IntPtr.Zero, "Chrome_WidgetWin_1", null);
Bitmap BMP = Capture(WindowHandle);
BMP.Save("C:\\Foo.bmp");
BMP.Dispose();
Any suggestions here is appreciated.

Hello,
I would prefer capture the screen rather than get it from that application directly.
It has been discussed in the following thread.
Is there any way to hide Chrome window and capture a screenshot or convert the Chrome window to image?
In this case, you could remove the line "ShowWindowAsync(mainHandle, 0); " since you don't want to hide it.
using System;
using System.Runtime.InteropServices;
using System.Diagnostics;
using System.Drawing.Imaging;
[DllImport("user32.dll")]
private static extern bool ShowWindowAsync(IntPtr hWnd, int nCmdShow);
[DllImport("user32.dll")]
public static extern bool GetWindowRect(IntPtr hWnd, out RECT lpRect);
[DllImport("user32.dll")]
public static extern bool PrintWindow(IntPtr hWnd, IntPtr hdcBlt, int nFlags);
public WhateverMethod()
//initialize process and get hWnd
Process chrome = Process.Start("chrome.exe","http://www.cnn.com");
//wait for chrome window to open AND page to load (important for process refresh)
//you might need to increase the sleep time for the page to load or monitor the "loading" title on Chrome
System.Threading.Thread.Sleep(4000);
chrome.Refresh();
IntPtr mainHandle = chrome.MainWindowHandle;
RECT rc;
GetWindowRect(mainHandle, out rc);
Bitmap bmp = new Bitmap(rc.Width, rc.Height, PixelFormat.Format32bppArgb);
Graphics gfxBmp = Graphics.FromImage(bmp);
IntPtr hdcBitmap = gfxBmp.GetHdc();
PrintWindow(mainHandle, hdcBitmap, 0);
gfxBmp.ReleaseHdc(hdcBitmap);
gfxBmp.Dispose();
bmp.Save("c:\\temp\\test.png", ImageFormat.Png);
ShowWindowAsync(mainHandle, 0);
[StructLayout(LayoutKind.Sequential)]
public struct RECT
private int _Left;
private int _Top;
private int _Right;
private int _Bottom;
public RECT(RECT Rectangle)
: this(Rectangle.Left, Rectangle.Top, Rectangle.Right, Rectangle.Bottom)
public RECT(int Left, int Top, int Right, int Bottom)
_Left = Left;
_Top = Top;
_Right = Right;
_Bottom = Bottom;
public int X
get { return _Left; }
set { _Left = value; }
public int Y
get { return _Top; }
set { _Top = value; }
public int Left
get { return _Left; }
set { _Left = value; }
public int Top
get { return _Top; }
set { _Top = value; }
public int Right
get { return _Right; }
set { _Right = value; }
public int Bottom
get { return _Bottom; }
set { _Bottom = value; }
public int Height
get { return _Bottom - _Top; }
set { _Bottom = value + _Top; }
public int Width
get { return _Right - _Left; }
set { _Right = value + _Left; }
public Point Location
get { return new Point(Left, Top); }
set
_Left = value.X;
_Top = value.Y;
public Size Size
get { return new Size(Width, Height); }
set
_Right = value.Width + _Left;
_Bottom = value.Height + _Top;
public static implicit operator Rectangle(RECT Rectangle)
return new Rectangle(Rectangle.Left, Rectangle.Top, Rectangle.Width, Rectangle.Height);
public static implicit operator RECT(Rectangle Rectangle)
return new RECT(Rectangle.Left, Rectangle.Top, Rectangle.Right, Rectangle.Bottom);
public static bool operator ==(RECT Rectangle1, RECT Rectangle2)
return Rectangle1.Equals(Rectangle2);
public static bool operator !=(RECT Rectangle1, RECT Rectangle2)
return !Rectangle1.Equals(Rectangle2);
public override string ToString()
return "{ + _Left + "; " + " + _Top + "; Right: " + _Right + "; Bottom: " + _Bottom + "}";
public override int GetHashCode()
return ToString().GetHashCode();
public bool Equals(RECT Rectangle)
return Rectangle.Left == _Left && Rectangle.Top == _Top && Rectangle.Right == _Right && Rectangle.Bottom == _Bottom;
public override bool Equals(object Object)
if (Object is RECT)
return Equals((RECT)Object);
else if (Object is Rectangle)
return Equals(new RECT((Rectangle)Object));
return false;
And the key method used is the one shared in
Get a screenshot of a specific application.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

solved error: cannot resolve dependencies for "hal"

Hello all,
I tried doing a pacman -Syu today and recieved the following: error: cannot resolve dependencies for "hal"
Then I did a pacman -S dbus-glib and got : dbus-glib: not found in sync db
then I did pacman -S dbus and recieved the same message.
Then I did pacman -S hal and got:
error: cannot resolve dependencies for "hal":
"dbus-glib" is not in the package set
Am I missing something? Any help would be greatly appreciated.
Oh man, in my fleeting moment of panic I didn't think things through and posted right away.
I commented the following lines in pacman.conf and now it works
#XferCommand = /usr/bin/aria2c -s 2 -m 2 -o %o %u
#XferCommand = /usr/bin/pacget %u %o
Not too sure why, but I am happy all is working.
Last edited by Cancel (2007-02-17 08:15:54)

I followed this wiki and it did make a difference. It is still very fast downloading packages.
http://wiki.archlinux.org/index.php/Imp … erformance
I haven't had a chance to uncomment those lines again to see if it still gives me errors, but you might have luck trying what the wiki suggests.
After following the wiki, pacman tries a bunch of servers to give you the best speed possible (if I remember correctly). I hope this helps you.

Application Dependencies for RAC DBs

What are application Dependencies for RAC DBs specially there connectivity, and High availability?

You'll probably get lots of suggestions based on lots of experiences, however, those things may or may not happen to your application. The best and always-applicable advice you'll get is that you absolutely must test your application in every possible scenario (and even scenarios you think are impossible) for how it reacts to failure as well as how it scales with parallelism and how much contention it creates due to its design. Create a realistic test environment, ensure you can produce realistic, real-world load on the application, and then start testing. With 11g, the load generation gets a lot easier to do with Real Application Testing. With earlier releases, it will be using more traditional methods/tools.
So, you'll get good advice, but it won't be a substitute for doing the actual testing work yourself with your application.

What are the possible values for the JOB status?

What are the possible values for the JOB status in the table TBTCP and significance for each?

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

How can I define the possible entries for "invoicing process" at fkkinv_ma?

At the transaction code fkkinv_ma, I fill in the fields "Date ID" and "Identification" but I have a problem with the field of "Invoicing Process". When I psh theF4 button, there comes no search help. What should I do? Should I define the possible entries first? If I should, how can I define the possible entries for "invoicing process"? How is the customization done?
Thanks in advance for the answers.

You have to define them in the IMG
Financial Accounting (new)
Contract Account Recievable and Payable
Business Transactions
Invoicing
Invoice Types
You have to set up a number range, decide what type of Financial transactions should not be invoiced -- like Dunning Charges
then you have to have a developer create the form and form class of invoice.

Buy my problem of camels Store Lee games possible solution for me my problem?

Buy my problem of camels Store Lee games possible solution for me my problem?

This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
Windows XP

Query to get possible values for each segment

Hi Gurus,
Give the flex value set id, what is the query to get all possible values for each segment (just like what is shown in the accounting flex window)?
Thank you,
Beibei

Hi Beibei,
The table FND_FLEX_VALUES_VL can give you details of values available in the Value set i.e. 1 segment at a time.
If you are looking for a concatenated view of Accounting Flexfield values, that would be available in GL_CODE_COMBINATIONS table.
Regards,
Ivruksha

Looking at dependencies for a table gets Error ORA-01436: CONNECT BY loop

I have just tried looking at the dependencies for a table and I received an "ORA-01436: CONNECT BY loop in user data.
Please let me know if there are any fixes or work arounds for this problem.
Thanks
Sunil

Looks like there is another posting on this.
ORA-01436 in Dependencies
Because the query uses CONNECT BY and there is a circular reference it errors out. If it didn't, there would be an infinite number of results.
This is the query that Oracle is using: SELECT owner, object_type, object_name, object_id, status , decode(replace(object_type,' ','_'),'PACKAGE_BODY','PACKAGE',replace(object_type,' ','_')) type_link
FROM sys.all_objects
WHERE object_id IN (
          SELECT object_id
             FROM public_dependency
           CONNECT BY PRIOR object_id = referenced_object_id
           START WITH referenced_object_id = :OBJECT_ID ) pulled from sql_dev_root/jdev/extensions/oracle.dbdev.oviewer.jar, editors.xml
I am not a connect by pro, so I can't tell you how to alter this to make it stop digging when it encounters an infinite loop, but maybe someone else can. In other tools, it normally dynamically pulls this data into a tree so it is only querying one level at a time.
This happens if for example MY_TABLE depends upon MY_PACKAGE and vice versa:
--MY_TABLE
--MY_PACKAGE
    --MY_TABLE
      --MY_PACKAGE
        .... Hopefully someone on the sql dev team has a solution to this and can get it fixed in a later release.

Seq of possible taxes for country IN is limited up to 9

Hi,
We have configured the FI Tax procedure and the same condition types are using for the SD Pricing procedure. But thing is, based on our client requirements, we have created 15 condition types to arrive the accounting requirements. So, to create condition records for the possible tax codes, we need to assign the condition types to the country code IN where system
is not accepting the condition types more than 9 in table entry - TSTL field - LFDNR (Sequence of possible taxes for each country).
Why system is not allowing me to enter more than 9 condition types for any country code?? What is the reason behind? And how to increase the sequence numbers to accept more than 9?
Please help me regarding..
Thanks & Regards
Ramaki

You have to take a help of ABAPer by increasing the length of Field LFDNR from 1 to 2 in Table TSTL.
Best regards,
Ankur

Possible values for WDY_ATTRIBUTE_FORMAT_PROP-DATE_FORMAT?

Hi,
where can I lookup possible values for formatting a date typed field using WDY_ATTRIBUTE_FORMAT_PROP-DATE_FORMAT?
I did not find any documentation so far.

Same question here.
I have a field in webdynpro table of type domain TZNTSTMPL which is displayed as "06.12.2011 08:46:30,7730500". I want to format it like "06.12.2011 08:46:30" and thought it is maybe possible with something like:
data: LS_ATT_FORMAT TYPE wdy_attribute_format_prop,
LO_IF_SO_ITEMS TYPE REF TO IF_WD_CONTEXT_NODE_INFO.
LO_IF_SO_ITEMS->set_attribute_format_props( name = 'CREATED_ON'
format_properties = ls_att_format ).
So anyone has an idea which value for WDY_ATTRIBUTE_FORMAT_PROP-DATE_FORMAT are possible?
Thanks
Markus

Generating Dependencies for Calculation/Analytical View in SAP HANA.

Hi Everyone,
I am trying to find out the dependencies for a specific Calculation/Analytical View. I have used sys.object_dependencies but that gives only the table names on which the calculation view is dependent on, but not theanalytical and attribute views.
For example, consider a calculation view which is developed by joining 2 analytical views and the analytical views in turn uses some attribute views. So my ask is to get all these object information not just the tables. This is very basic info and I assume it must be captured in some metadata views. My aim is to query such metadata views and get the dependencies. Any pointers to this would be highly helpful.
Best Regards.

Hi Samarpan,
You can right click on the view and select option 'Auto Documentation' with content type as 'Model Details' in the wizard. Select a target location for the document to generate.
When you open the generated document, in the last there is a section as 'Cross References' which will give you full hierarchy of views/tables used.
Hope this will solve your problem
Regards,
Rashmi

FLEET Table, Possible Values For Field IS SI UNIT

Dear experts,
While doing analysis on fleet data I realized that for field IS_SI_UNIT (PM: Vehicle Data in SI Unit (e.g. Dimensions)) in table FLEET in two separate systems we have vehicle records set with different entries for this field.
In one system vehicles are stored with value F: DB Unit set individually (new)
and in other one with value Y: DB Unit set through (new)
Systems are SAP ECC 6.0
Does anyone know what does it mean and what influence this has? In both systems vehicles are created by end users using standard PM creation transaction and those indicators are set in background while equipment is saved so there is not influence by end user.
I could not find much information on SAP support portal about meaning behind possible values for field IS_SI_UNIT in table FLEET so was wondering if anyone knows more here?
Thanks,
Ivo

Dear,
There will not be any impact.Finally system will consider only SI units for fleet equipment consumption calculation.
Kindly read note:366733 - Equipment/fleet: SI units in table FLEET and 372736 - Equipmt/vehicle:rounding error because of SI units
It may help you.
But in my system i can view only "Y"
Regards,
Pardhu

HsvWebSessionWSP.dll possible dependencies for regsrv32 sucess

Similar Messages

Maybe you are looking for