HT1175 My full back up reads 250gb but my time machine has only backed up 149gb what do I need to do to fully back up?
I am using my time machine for the first time. I have bought an external backup mobile drive 1TB.
I have turned time machine on and it has save only 149gb of 250gb. How do I get it to save 250gb?
How do I see what it has actually saved and once stored how do I view and restore certain files back to my laptop?
Many thanks Christine
Time Machine does exclude some things automatically, such as system work files, most caches and logs, your trash, etc. That's usually a few GBs, though, not 100!
If the backup completed normally, then it backed-up everything it needed to. It sounds like you have something extra-large (and somewhat hidden) taking up a lot of space. See Where did my Disk Space go? for some common culprits.
For other info on Time Machine, you might want to start with the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions. Questions #14-17 and 19 there cover the various ways to see and restore from your backups. That's a lot of not-so-light reading, so don't hesitate to post back with any other questions.
By the way, Time Machine is the software that performs backups, to various places. A Time Capsule is a piece of Apple hardware combining a wireless router and hard drive, and is a good way to make wireless backups with Time Machine.
Similar Messages
-
My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.
It's not clear whether you were able to do any backups to this drive at all. If not, it's probably not formatted properly. See #5 in Time Machine - Frequently Asked Questions for instructions.
If you did get any successful backups, there may be a problem with the drive, or the backups may be corrupted. Try to repair the backups, per #A5 in Time Machine - Troubleshooting. -
Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?
Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I have my time machine set-up with my time capsule/airport. I cannot open my backups in the time capsule as it reads "spars bundle temporarily unavailable." Also, my time machine backup files are missing some files and not in oder by name as designed. It seems something is is not working. I have don a disk repair on the time capsule. I have closed and reopened my computer. Still unable to open time capsule. Does anyone know where else I need to check for errors?
There are two key but related bugs in Yosemite..
The big one IMHO at least is the network one.. and the secondary one is TM which is itself unreliable.
To fix the Network ones we have a long list of things to do.. but you do apparently have access to the TC so for now that is not the major one.
However some of your statements mean I am a bit lost on what you have done.
I cannot open my backups in the time capsule as it reads "spars bundle temporarily unavailable."
If you cannot open your backups how can you find that the backup files are missing. The files are missing from the sparsebundle which you cannot open??
my time machine backup files are missing some files
You cannot repair the disk of the Time Capsule.. only the Sparsebundle can be checked.. that means that you have accessed it and mounted it for disk utility to check it.
I have don a disk repair on the time capsule.
So I am confused about the comments.
What I would recommend is the standard set of fixes to Yosemite.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
That is all to cover the network side of things.
Time Machine issue is a harder one because there is no simple work around I can give you.
My recommendations are to stop using a TC and test TM to an external hard disk plugged into the computer.. Do a whole new backup and see if that is fully working and accessible.
Or change over to third party program for backup.. I do recommend Carbon Copy Cloner as I use it personally but SuperDuper has a good reputation and there are others. It is far easier and quicker to test a bootable clone made with CCC as you simply boot from the backup. -
My Time machine has stopped backing up saying there are some read only files.
My Time machine has stopped backing up and says that ther are some read only files preventing this. What steps do I need to take to fix it?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context. -
I have a Macbook with OS X 10.6.8 and a 500GB external hard drive, which still has 208.5GB available. For some reason, Time Machine has simply stopped backing up any new files (documents, music, movies--anything). No items are set to be excluded from backups in Time Machine options except for the external hard drive itself. Also, no error messages appear, Time Machine seems to run just fine, but when I enter Time Machine, or look through the files on the hard drive, new files just aren't there. I am not very tech savvy, so I was not able to understand some of the answers people gave to similar questions on here. I did go to Pondini's website and followed as many troubleshooting instructions as I could understand (for example I did manage to do a full reset of Time Machine) but nothing changed. Do I just need to erase the entire backup drive and sart all over? If so, what will prevent this from happening again later on? Please help.
Your TM drive liekly stopped backing up because it hit a series of bad sectors on the drive, to eliminate this all new drives should be Disk Utility > Zero Erased (one step below 7x in Lion) before use.
Reducing bad sectors effect on hard drives
Diversify your backups with bootable clones and archives on DVD's etc so your prepared for anything, including using a PC.
only if you have too of course, but it happens, people just can't afford a Mac anymore.
Most commonly used backup methods explained
So make other backups, then Zero Erase teh TM drive and set it back up again and your problem should be resolved.
If not, then it's data corruption on your boot drive!
You'll know if it's data corruption on your boot drive, when you go to make the clone, it will hang too. -
Time machine backups only updates in PVM or full bkup
time machine backups only updates in Parallels VM (vista) or full bkup file.pvm each time from scratch?
how upgrade 10.7.4 to 10.7.5?
where found xcode for this os x version?Thanks for the inputs, however looking at those links and it is not possible to associate / inherit old backups at 10.6.8 as tmutil is a new command at 10.7
I tried deleting the /Library/Preferences/com.apple.TimeMachine.plist file as per A4 'Full Reset Of Time Machine', but when I went back into the TM interface it still only showed todays backup.
I then realised that when restoring my system using Migration Assitant, I created a new 'temp' admin profile (internal user ID 501) to pull everything back so I could retain my original admin profile / name (given internal ID 502). I logged in using this temp admin that I hadn't got around to deleting and wo and behold TM was showing all the backups. I then logged out of this temp admin and back into my main profile and the backups are still showing
So, it was either deleting the plist file and then requiring a log out that fixed it. Or going back to my temp profile, launching TM which then fixed something somewhere? Either way now fixed. -
Time machine has stopped backing up to my Western Digital Network Drive
I have a WD 1TB World Edition drive which pretty much worked plug 'n' play when I bought it in early Jan backing up with with Time Machine instead of the bundled software. I've had a few troubles backing up, but largely due to router problems. Time machine has worked great with the drive, as promised.
Until a few days ago, when it stopped backing up altogether. The usual backup icon stopped appearing on the desktop and it came up with error message saying the backup file cannot mount or something like that. Strangely, the shared folders on the drive still show up and I can access all the mp3 files, etc I have loaded up. So, I checked the router, cabling to the drive, rebooted the drive, resetted the drive and checked the settings using MyBookWorld. This stopped the error message showing when I tried to backup and the backup icon now shows on the desktop again. But it won't backup !!! It just stalls and in Time Machine says its configuring without doing anything. I have tried hooking up to the drive directly, still no joy.
I'm now at the end of my tether. Does anyone have any ideas? I have asked WD support and they were next to useless. Thanks !Hi, and welcome to the forums.
Time Machine does not back up reliably, if at all, to most network drives, except Time Capsules or a shared drive on another Mac running Leopard or Snow Leopard on the same local network.
Here's the criteria they must meet: Disks that can be used with Time Machine. And be careful here: just because some 3rd-party hardware claims to support Time Machine doesn't necessarily mean that Apple supports it, or that it will work in all circumstances.
We've seen a number of problems reported with that drive. Have you downloaded the firmware update that's supposed to make it work?
with error message saying the backup file cannot mount or something like that.
The exact message might help.
Time Machine says its configuring
Is the word "configuring" or is it "Calculating changes"? "Configuring" sounds more like a message from WD, or perhaps your router, than one coming from Time Machine.
Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the backup in question, then copy and post all the messages for that run here.
You might also try to Repair the backups. I don't know exactly how you'd get to them on a NAS, but try the procedure for a Time Capsule in #A5 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum. -
Hard drive packed up, but had Time Machine backup. I installed new ssd and upgraded to Mountain Lion, but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this? A backup run did not install either photos or songs. Graham
Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue! -
I use Time Machine with an external hard disc which has worked perfectly for some years. Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system. Any ideas?
Has Apple recently up-dated my OS (Lion) such that every time the screen saver starts it disables Time Machine. I have to switch-off the computer and re-start in order to undertake a back-up. I have now switched of all screen savers.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) -
I recently upgraded to Lion and I had Adobe InDesign which is no longer supported. Problem is, I have several files I need but cannot open because it was PowerPC based. What do I need to do? Thanks in advance!
Assuming you registered your older version, you can retrieve the serial number by going to Adobe's site and go into your account. On this page, click the My products link in the right hand column of the first three. You'll be asked to enter your user account name and password. Once in, a list of all software you've purchased will be shown, along with their serial numbers.
That said, it really won't help you much. A PowerPC only version of InDesign means it's no newer than the original CS version, and won't be worth a cent towards an upgrade discount. To get CS6, you'd have to pay full price again. -
I have done my back up using time machine, now I have a new mac and I need to access the files that I had saved from my old mac. How can I do that?
Use Migration Assistant on your new Mac:
Click Continue:
On the next screen, choose your Time Machine backup disk.
Don't bother to migrate Applications unless you know they will work on your new Mac. For example, PowerPC applications won't work. Just migrate your user account which will copy all your photos, music, movies, and other documents.
Note: you will not be able to migrate the information to same account in which you are already logged in. Migration Assistant will tell you that and recommend what to do. It can migrate the information to a new account, but you will have to give it a name you might want to change later. One way around this is to create a temporary account, log in to it, and run Migration Assistant which will replace your normal account. Then, log out of the temporary account, log in to your usual one, verify everyting works as you expect, and delete the temporary one.
All this can be avoided when you set up a brand new Mac by running Setup Assistant which essentially does the same thing to create your new account, but most people are too excited to do that and elect to migrate later. -
Can Yosemite read a snow leopard Time Machine backup
Can Yosemite read a snow leopard Time Machine backup. Once I installed Lion over SL and it was a disaster since I could not get any docs or photos back, so had to put SL back on my old iMac.
Will 10.10 give the same problem or is there a way to migrate the old 10.6.8 data to 10.10?
ThanksYes, you can do that. The only limitation is that you can't encrypt the backup volume.
-
i have the version of itunes the ios 7 update requires but every time i try to update my phone it says i need the itunes version 11.0.5 but i already have it?
You need iTunes 11.1 which is not available for download in google chrome or other browsers. The only browser it has worked for with me is Safari. Hope this helps!
-
I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?
Try resetting the printing system.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.
Maybe you are looking for
-
Problems with string encoding - need the text content in char* format.
The problem is non ASCII-characters, which comes out as some sort of unicode I need to desipher. Here's what I got: A text frame object with the TextString "Agnartjørna" I get the text content of this object into an ai::UnicodeString the following wa
-
CFselect onchange doesn't work on flash Form
Hello : I have looked for more than a week to find out answer but couldn't fine anything. I have cform with tye="Flash" and cfselect with query to populate the values. I want use onchange="" after I select any value on cfselect to submit the pages a
-
Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?
-
Mountain Lion and Printing on an Epson R1800
I have an Epson R1800, which according to Apple, is supported in Mountain Lion. Now, this printer worked nearly flawlessly until upgrading to ML. Now that I have, the printer just kicks out sheets of blank paper and I am always told that the printer'
-
NQSerror: 37005 Transactional Update Failed
Working in the 11g repository in online mode. When attempting to check in changes, I'm getting this error: nQSError: 37005 Transactional Update Failed If I go to the Fusion Middleware Control and restart all OBIEE services, everything is fine again f