HT1212 im having a hard time fixing this device
my son locked hisself out his phone and cant get back in it. ive tried connected to itunes but it ask me to eneter password but the whole phone disabled
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Similar Messages
-
I want to take my debit card information off of my itunes account i have a iphone 4 im having a hard time?? does anyone know how to put none for the billing information
http://support.apple.com/kb/ht2534
-
My dad has a 1st gen iPad. He is 83 yo. I recently purchased an Apple TV for him because he loves Netflix and I told him that he could view his photos via the television. BUT, I'm not having success with Photostream. Help me.....I've been researching and trying everything I can and so far, no luck. He keeps asking about the photos, and I'm losing patience with myself and Apple TV. Can anyone help???? Thank you.
http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
http://support.apple.com/kb/TS4215
Cheers, Tom
Oops!!!!!! Just realized Airplay & Apple TV requires iPad 2 (or later).
Message was edited by: Texas Mac Man
But there may be a way. http://www.youtube.com/watch?annotation_id=annotation_586623&feature=iv&src_vid= urjjHjJ0pdc&v=sSKQVxucnLY -
Convert SSRS dropdown MDX query to INNER JOIN w/ NONEMPTY? Having hard time with this.
I'm having an incredibly hard time with this, mostly because I'm very new with MDX.
I created a simple report (with AdventureWorksDW) whose datasource is an SSAS cube. I select a datekey from the dropdown menu, and the report displays [Measures].[Order Quantity] for that day.
The problem is that the dropdown displays every single value from the dimdate dimension. DimDate goes from 20050101 to 20201231, so the dropdown is very long.
How can I alter the SSRS-generated MDX so that it does an INNER JOIN with Fact table and only the dates shown in the dropdown are the ones where there's data in the Fact table?
Currently, the fact table only has 2 days of data (20141015, 20141016), which means that the dropdown should only display those two dates. I'm including the generated code MDX that populates the dropdown menu:
WITH MEMBER [Measures].[ParameterCaption] AS
[Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS
[Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption],
[Measures].[ParameterValue], [Measures].[ParameterLevel]}
ON COLUMNS , [Dim Date].[Date Key].ALLMEMBERS ON ROWS
FROM [Adventure Works cube]
Any help is appreciated.
VMHi vmhatup,
you can get rid of blank data using nonempty function and get rid of negative values using filter function nonempty should be inside of filter so it applies first, otherwise it is too slow.
Your statement could look like this
WITH MEMBER [Measures].[ParameterCaption] AS
[Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS
[Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption],
[Measures].[ParameterValue], [Measures].[ParameterLevel]}
ON COLUMNS
, filter(
nonempty([Dim Date].[Date Key].[Date Key],measures.measureName)
,measure.measurename >0
ON ROWS
FROM [Adventure Works cube]
Jiri Neoral -
I'm trying to install a Citrix XenApp for work purposes and am having a hard time. The message "The installer has insufficient priveleges to this directory: C:\Program Files (x86) \Mozilla Firefox \Plugins \resource. The installation cannot continue. Log on as administrator or contact your system administrator." I am using a Toshiba Satellite laptop and am the only user and administrator as well. I have read other Firefox support articles and google answers but nothing has resolved this issue. Please help! Be detailed and visual if possible
There are no BIOS settings, because Macs don't have a BIOS. I don't use Parallels, but I assume it has simulated BIOS settings. You'd have to consult its documentation to find out how to change them.
-
Having a hard time signing into websites with Safari
Hi, I'm having a hard time signing in my username and password for e-mail addresses I use and for message boards as well. I use Safari all the time accept for my school website that requires IE. Anyways, I use Comcast and I have been trying to sign into my e-mail address name and everyime I click "sign in mail" Safari says "Safari Can't Open Page". So then, I went to my AIM mail to sign in there and then it said the same thing. Then I went to this Apple Forum to ask if anyone knows what the problem is, and then when I went to sign into here, the same thing. So right now I am using Camino, but can anyone help me with this problem or is anyone having the same problem as me? Thanks.
I too have been having a problem of logging into certain websites with a username and password. Instead of logging in successfully with Safari, a blank page or an error would occur.
This happened for: citibank, comcast, sprint, and miscellaneous other sites.
This problem apparently had something to do with my cookies since erasing my cookies seemed to solve the problem. Here's how to do it:
Safari -> Preferences...-> Security -> Show Cookies -> Remove All.
Keywords: login error failure log in log-in unable to trouble
iBook G4 Mac OS X (10.4.7) 800 Mhz / 640 mb -
Having a hard time with burning photos onto a CD...
Whew! I just found the photos I thought I had deleted this morning, they're in my Finder, inside the iPhoto Library. Now I'm having a hard time trying to burn them onto a CD. The size is 232 MB and my MacBook is OSX Lepard. Would you tell me how to do it step by step? I'm not good at this stuff. Thank you in advance for your help.
It is simple......
http://www.ehow.com/how_6225993_burn-photos-cd-mac.html -
I'm having a hard time with my sound blaster z sound card to sync with cs6. Can anyone share with me
I'm having a hard time with Adobe CS6 synching up with my soundcard. Latency settings and other applications are challenging at this time. I had 3.0, but my Windows 7 computer is now "deceased". Please help.
I endorse everything that Steve just said but to try and get you going while you're shopping for an audio interface more suitable for sound work than use as a doorstop, try the following:
Go to the Windows sound control panel and make sure the SB card is selected as the default on both the Recording and Playback tabs. On the advanced menu for both, set the bit depth and sample rate to either 16/44,100 (CD) or 16/48,000 (Video) depending what suits you best. Note that your SB card only works natively at 16/48,000 so anything else involves a conversion that the card hides from you.
Go to the Windows Control panel and, under the sound section, turn off all system sounds (since they can hijack your sound card). Close every other application that may want to use the sound card (internet for example).
In Audition, go to Edit/Preferences/Audio Hardware. Set the device class to MME. On the drop down menus set the Default Input and Default Output to be your Soundblaster. On the Master Clock set it for the SB Output (this'll likely be default). Set the latency at around 200ms (you may need to increase this later if your playback stutters--or you can try decreasing it until you get stutter, then take it back up a bit. Set the sample rate to whatever you selected on the Windows Sound Control Panel.
The Soundblaster will likely have installed it's own control menu. Go to this and select Mic or Line as appropriate for the input and whatever you need for the output. I can't be more specific as SB keep changing what they call things.
Hopefully this'll get you going even if it's not the best compromise for quality and latency. -
I am having a hard time with my fcp x running so slow. i can't even move my mouse without the time wheel coming on and staying up for at least 20 some seconds. I have upgraded my ram to 12 and changed all my files to proxy files; also i cleaned the crap out of my computer removing all other media files I didn't need and it is still running the same. Please help! I have a deadline on my short film to be submitted and I can't finish it like this. Oh also it ran fine in the beginning but and one day it just started doing this out of no where. Anything will help! Thanks
In addition have you got FileVault switched on as that will kill performance.
-
I authorized a second computer on my iTunes account and tried to get my first computer's library on my second computer via the Cloud. Many of the songs only partially downloaded, and I am having a hard time getting rid of the library with the partial downloads (so I can get full songs). I am considering nuking the current iTunes on the second computer and re-installing, giving myself a clean slate to work with. Is this the right way to go?
How to use your iPod to move your music to a new computer
-
Still having a hard time with "search" driven new support site.
I am still having a very hard time using this new support site. It is extremely confusing. Confusing is frustrating.
I've looked at the Tutorials and User Tips. While the User Tips have often been helpful, overall I feel like the Tutorials especially is like getting a 5 page pamphlet on how to fly a jet plane. Top level overview. Not detailed enough.
It shouldn't be so difficult - it's overly complicated to use this new site. It should be intuitive. It's not.
My biggest issue is that this forum seems to REQUIRE a user to KNOW a priori what the user is looking for so that a SEARCH can be done. It seems to have no "browse" friendly features such as categories. And it's missing those ambient indicators such as the partially filled light blue dots on the old forum that showed in a nano second what threads were new, had updated posts, or were already read.
The new site seems geared to take one down a rabbit hole with SEARCH too because it's constantly suggesting very OLD content that's not relevant.
If you don't SEARCH and use just the right terms and know exactly how to set up some sidebar, toolbar, RSS feed, bookmark, email notice, etc etc etc. it's almost impossible to find things on purpose or accident or to know when a thread is updated.
On the old forums, when I would post a question for myself I made a point to browse for threads where I might be able to help someone else. I have no idea how I could do that now.
I now dread having to use the forums. I can't seem to help myself by finding existing answers in prior posts, help myself by keeping up with my own posts (since I can't tell what's new/updated) and I can't help others.
It would be great if some kind of organization and structure could be put in place to help make this support site browse friendly.Hi, Gordon: I would guess we have a few hundred at the most. I have only entered about 20. Most of the entries are retail stores we sell wholesale to, and contractors we sell at contractor prices, but we also have a retail trade of customers and that is going to increase a lot when we open our new show room in a few months.
My main concern is design and sales to the contractors and public, but I frequently get calls from stores asking about our inventory stock, shipments, etc. I'm new to this so I am just learning. -
Having a hard time with permissions to create dir and files in www
Having a hard time getting permissions to create directories and files in www folder:
I followed the following guide here: https://www.digitalocean.com/community/ … arch-linux and here: https://www.digitalocean.com/community/ … arch-linux
So now I have a LEMP stack which runs fine and I have my root account secured and a new username "adriano". If I SFTP into the server using the username adriano, I am unable to create any files or directories. Trying to do a simple wordpress install doesn't work because I need to be able to create a folder for it, and a wp-config.php file. Both of which, like I mentioned, I do not have permissions to do. Yes, the username "adriano" has been added to the sudoers file via visudo.
I've never been very good at UNIX permissions so I was wondering if maybe someone can help me out?
Also, since I am using nginx it does not seem like I have a www-data group or user and my www folder is /usr/share/nginx/
Thank you,
AJNo, no, you guys misunderstand me. I am not that much of an oblivious person. 95% of the time I understand EXACTLY what the code that I am copying and pasting does. And when I don't, I look into it further before executing said commands. I just tend to not remember commands so I google them, see examples, and then copy and paste them to avoid the busy work of typing out long strings. For example, it took me like 6 months to remember that to untar a .tar.gz file it was -xvfz.
But I digress. drcouzelis, I do have root access. It's my own VPS. However, I have always used shared hosting through different hosting providers and now that I got a VPS and have to do everything myself, I am a little bit lost.
I followed what wonderwoofy said and created a www-data group, added the adriano user to said group, and changed the owner of my http server root to www-data, and I SFTPed into the server again with filezilla and it still works perfectly. However, those "hordes of hackers" drcouzelis warned me about does not sound pleasant so I am really really really hoping one of you guys can tell me the next steps. Root login is disabled in the /etc/ssh/sshd_config file, and I also changed the port to a random port I created. My web files are all served from /usr/share/nginx/ (there are different folders in there that correspond to different domains.) Now what I am wondering is that if user "adriano" is in the sudoers file as ALL=(ALL) ALL, doesn't that pretty make adriano the same as the root user? The reason why I am so worried about this is because I heard/read countless times that working through the root user is BADDDDDDDDDD and will bring evil and shame upon your life (not in those exact words) and that you should never work with it. Also, do I have to worry about anything dealing with groups and/or users and/or permissions when it comes to PHP? I have php-fpm installed.
I am willing to buy anyone who can help me out with this a beer or two and I will be forever in your debt.
Thank you,
AJ
Last edited by AJCR (2013-05-23 02:52:03) -
I am using OS X 10.8.5 but I'm having a hard time downloading Mavericks.
It keeps on showing that there is an error downloading.
Can someone can help me?Some have managed to resolve the problem by cancelling the download, logging out of their App Store account and then logging back in again and starting over. The same approach also sometimes works for a stalled download:
http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/#slideid-23477 1
Also, if you are connected via wifi, try connecting via ethernet cable if you are able to. It's a 5.3gb download and it seems the more reliable the connection is, the better. -
I am having a hard time downloading the adobe photoshop cs5 it keeps downloading as a pdf file help
I am having a hard time downloading the adobe Photoshop cs5 it keeps downloading as a PDF file help
Try the links posted at the bottom of this page.
Downloads of older Creative Suite Products
http://helpx.adobe.com/download-install.html
Nancy O. -
I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?
Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry
Maybe you are looking for
-
Can't open files that are downloaded
Hi, I can't open up the files that are downloaded. When I try to open them up, they all say "the file may be corrupted". What's going on and how can I fix this? Thank you
-
I need to download the latest itunes but it says i already have it installed?
i need to download the latest itunes but it says i already have it installed?
-
Language translation for text elements.
Hey ABAP Gurus, I am having a problem, with translation of text elements in korean language. I have translated the TEs in korean, but they dont appear in ko, they appear in Portuguese... I have tried using se63, and se80 for the translation... Am I m
-
Windows 7 64 Bit, Oracle ... Error3706 Provider Cannot be found . Help Please
-Windows 7 64 Bit -ORACLE PROVIDER FOR OLE DB (OraOLEDB) 11.2.0.1.0 x64 -VB6 Keep Getting Error:3706 Provider not found. May not be installed correctly which file should be registered ? if anyone can help ...i would be grateful
-
Birthday's appearing twice in calendar app after adding to contacts
Hi all, I recently started adding birthdays to my contacts on my phone. After doing this, each birthday appears twice in the calendar app (on the birthday calendar with gift icon). This also creates a duplicate of that contact in my contact list.