HT1212 my ipod touch is disasbled i connected to itunes and still cannot figure out
My Ipod touch is disabled. I connected to itunes and it tells me to unlock ipod touch first and i cant because screen says IPod is disabled connect to itunes
Read this.
Similar Messages
-
I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.
oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-
-
Hi im trying to connect to itunes and i cant figure out how to enable it
my ipod is disabled and it says to cunnect to itunes and i cant figure it out how to enable it. HELP ME
It's possible that you've tried the password too many times and you're locked out.
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
please help
Place the iPod in recovery mode and then restore the iPod via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I updated my ipod but it failed....
Now my Ipod touch is showing a connect to itunes image. When I connected it to itunes it said that I need to "Restore it". But I have video on it that I really, really need. How do I do this without loosing all of my footage and photos?
Please help!?You do not. You have to restore the iPod. You can then restoe from backup and get to where you were when the the last backups was made.
-
my ipod touch is showing the "connect to itunes" screen.. and on connecting to itunes and clicking on "restore" it shows error 3014.. what do i do?
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
my ipod touch says "activation required, Connect to itunes" i restored it with on my itunes and it seems to be working again, after i tried connecting to my wifi with no luck i reset it, and again it pops back "activation required, connect to itunes" i restored again, its a non ending cycle, and it makes no sense having my ipod and i cannot connect to the internet with it, can someone please help with this issue?
Maybe here:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next would be to make an appointment at the Genius Bar of an Apple store. -
IPod Touch 3rdGen stuck in connect to itunes mode and driver missing
Ok what happened was I wasn't at my own house and and I wanted to put some new music on my iPod touch 3rd Generation. I had to update to the new itunes first. Then once I was finished I remembered I had to update my iPod touch so I clicked on update. Then at some point the ipod screen had the USB connect to itunes and a window comes up saying Windows needs to install driver software for your apple mobile device ( recovery mode ) and my computer cant find it. I have went into the device manager and when i click on properties for the apple mobile device recovery clicked properties and in the device status box it sais
"This device is not configured correctly. (Code 1)
There is no driver selected for the device information set or element.
To reinstall the drivers for this device, click Reinstall Driver."
I have looked to re download the drivers and I can't find them. The other problem is my primary computer is not working and if i have to completely reset my ipod i will lose practically everything because I have a feeling my primary laptop is getting reset.
So to conclude it's really saying my apple mobile device recovery mode is there, but there is not a driver installed to it.- First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try another computer/cable to help determine if you have a computer or iPod problem.
- If the other computer works and yours does not see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Ipod touch says its dissabled connect ti itunes but wont open up
ipod touch says its dissabled connect to itunes but wont open up
Try to connect in recovery mode, described here: http://support.apple.com/kb/HT1808
-
My iPod touch told me to connect to iTunes because it was disabled, but when I plugged it in, it said that there was a passcode that was needed to be unlocked. But I cant unlock it because it is disabled. What do I do?
Place the iPod in Recovery mode and then connect to yuor computer and restore via iTunes.
-
Hi, I've reset my 2nd generation ipod touch. However,the connect to itunes graphic appears on the screen but when I attach to my powerbook it doesn't show up either in itunes or finder. I can't be the first to have experienced this problem. please could someone advise me.
What iOS do you have on the iPod?
Did it every connect to your computer with that iOS?
The latest iOD for the 2G is 4.2.1 and that required a Mac with 10.5.8 or later.
Have you tried:
- another USB port and cable
- iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
my ipod touch 2nd generation wont connect to itunes. my computer says it is connected, but has no drivers. what does this mean and how do i fix it?
Start here. See the driver topic first.
iOS: Device not recognized in iTunes for Windows -
I have a ipod touch that has been locked by itunes and itunes says i must reset the ipod to unlock it. Is there a way to back it up on a hard drive or icloud before I reset it or avoid reseting it all? thanks
If you previous synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.
Otherwise y have to erase the iPod
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I recent recieved and Ipod touch model A1213 and i cannot figure out how to get apps on it. I have tried everything i can think of and when i try to update my ipod software it tells me that its already up to date. even though its only 1.1.5. How do i fix it?
You have a 1st generation iPod Touch.
It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
Ipod Touch will not turn on, recognize itunes and fully function.
My Ipod Touch will not turn on, recognize itunes and fully function. When it does, once in a blue moon, after 5 minutes it freezes. I am wondering if its becuase battery was left dead for 2 weeks or problems with the iOS. Resetting does not help.
Any help will be greatly appreciated.Hi,
Try a Reset
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Maybe you are looking for
-
Hi experts, Our SAP US payroll is calculating gross , taxation and net calculation has been done by third party. Now we are planning to go live with Net payroll in Midyear. All the previous tax values till go live Payperiod, need to be adjusted in TC
-
Error while uploading the data
Hi All, I changed a key figure from integer to a decimal. later i tried loading the masterdata from data source which consists that keyfigure as an attribute. data is loaded successfully into the PSA but while running the DTP i get the runtime error
-
Wireless and Ethernet working together
I have a high-speed wireless internet connection hooked into my network setup in my home office. There are several Powermac computers and a laser printer hooked into an ethernet network - they all have internet access and can communicate with the pri
-
Can't create Adobe PDF printer on Win7 64 bit
I'm running a newDell Optiplex 990 with Windows 7 64 bit in a large company. Our IT guy just installed CS6 and everything seems to work fine -- EXCEPT - when we go to Devices and Printers/Add printer, there's no Adobe PDF driver (are they still calle
-
How do I remove Adobe Bridge (Bridge.EXE).
I am unable to install Adobe illustrator Master suite because I get an error message to remove Bridge.EXE, but I can not find it on my PC anyuwhere. Can anyone help me get this removed?