HT1222 iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

P.S. I just noticed; when I hold the power and home button at the same time while it's plugged in as if I was going to restart it, my computer acts as if I'd plugged it in again (it makes the USB notification sound, itunes opens up again, I get the same "your iphone is in recovery mode" message, etc.), but that's the only response I've been able to get from pressing anything on the iphone. thanks again.

Similar Messages

  • Iphone 5s won't turn on after the update

    iphone 5s won't turn on after downloaded recent update

    Hey lillyluv2010!
    Here is an article for you that will help you troubleshoot this issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Iphone 3GS won't turn on after IOS6 update.

    I updated my dad's 3GS to IOS 6
    Now, It says the update is complete, press okay
    after you do this, it then tell's you to connect to itunes.
    Then once it is connected, it takes a while to bring phone up, then phone turns off and back to apple screen.
    I have tried to reset it aswell and it still isn't working.
    What else can I do??
    Kerryann.

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • IPhone 4 Won't Turn On After Application Crash

    I have a 32 GB iPhone 4, which I got on a data plan in late October, and has been working fine until now. I was playing around with an application (Hipstamatic), and the app kept crashing, finally after the 2nd or 3rd time, the screen went completely blank, and since then it has not responded to anything, iTunes won't recognize it, I tried the home button, power button reset procedure, nothing. I cleaned the phone with disinfectant about 15-20 minutes before, would that have anything to do with it? I often clean my phone, without any problems, I just hope I haven't shorted the **** thing out. I called it from another phone but couldn't get through. It has never been jailbroken.
    Message was edited by: dave2889
    Message was edited by: dave2889

    See if you can force the phone into recovery mode:
    Turn off your phone: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone to turn off. If you cannot turn off your phone using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When your phone turns off, release the Sleep/Wake and Home buttons. Then, leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • Iphone 5 won't turn on after a download

    iphone 5 won't turn on after a download

    Hello amonar,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    Have a nice day,
    Mario

  • My iphone won't turn on after recent update

    My iphone won't turn on after recent update. How do I fix this?

    2 more options:
    Restore from backup
    Restore as new
    http://support.apple.com/kb/HT1414

  • My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life.  It also won't turn off (again, the disc drive kicks in) unless you hold the power-button down for a long period.

    My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life.  It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period.  Help?

    Hi a,
    Try an SMC Reset: http://support.apple.com/kb/HT3964

  • I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?

    I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?

    You make an appointment at the genius bar of your local Apple Store and get it serviced/replaced. You broke it. If you can't even force a reboot, there's nothing much more you can do.

  • I left my 4s in the car for apprx 35 mins in 35 degree weather and the phone completely shut off and won't turn back on.  the battery was fully charged

    i left my 4s in the car for apprx 35 mins in 35 degree weather and the phone completely shut off and won't turn back on.  the battery was fully charged.  please help   it is my only ways of communicating beyond my macbook

    It probably overheated and shut down. Hold the HOME and SLEEP buttons until an Apple logo appears. This will take 10 to 15 seconds of holding both buttons.

  • My iphone doesnt want to start.all it shows is the apple icon.nothing more.i have tried holding the home button together with the lock button.what can i do .thanks

    my iphone 4 doesnt want to start . all it shows is the apple icon.i have tried holding the home button together with the lock button. nothing seems to work . please help.

    Plug the iPhone in with the Wall Charger. Then while plugged in do the Reset again, hold both Home and Power buttons until the iPhone Restarts. This usually begins to happen in less than 20 seconds time.
    If you this does not work you can try to Restore the Firmware on your iPhone. If you decide to do this, connect your iPhone to your computer with iTunes open. Hold both the Home and Power buttons until the iPhone is detected by iTunes in Recovery Mode, this takes about 20 seconds time. Restore your iPhone.
    If this does not work, you can try to Restore the Firmware on your iPhone in DFU Mode. Connect your iPhone to your computer with iTunes open. Hold both Home and Power buttons for exactly 10 seconds, release the Power Button and keep holding the Home Button until iTunes recognizes the iPhone in Recovery Mode, about 20 seconds more time. Restore the iPhone.
    If this does not work and you have Warranty or AppleCare Coverage take your iPhone to Apple for resolution of the problem.

  • HT4097 my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do

    my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do

    Read
    http://support.apple.com/kb/ht1808

  • My iphone 3G won't turn on after I installed fonts

    My iphone 3G won't turn on and it just stuck on apple logo then loading then turn off then that apple logo appears again .Please help me to fix this problem

    As I thought, which means your iPhone has been hacked, which is not supported by Apple directly or indirectly via these discussions. You need to contact whoever you downloaded the garbage from that allowed you to hack your iPhone and/or the garbage fonts for support with this.

  • IPhone 5 won't turn on after restore

    I have just upgraded from an iPhone 4 to an iPhone 5.
    I backed up my iPhone 4, but when I try and restore the music/pictures/apps etc it doesn't work properly.
    I plug in my new iPhone 5, and run through the 'Set Up Your iPhone' but restoring from my backup. It seems to complete the process within 4 minutes, and then says it will turn off and on again and will appear in iTunes. However it turns itself off, but then doesn't turn back on. I press the On/Off button on the top right of the phone and the Apple logo appears, and then goes to black again. The only way to turn my phone back on again is by doing a hard reboot (Home button + On/Off button at the same time). When it turns back it, it's as if its a new phone again - I need to select wifi, my iMessage details etc.
    I then go back to iTunes and the restore doesn't seem to have worked, as the 'Set Up Your iPhone' page is back up again.
    Weird thing is, I have all of my photos and have found a way to get my apps back - but I have no music, and iTunes still says my iPhone isn't set up.
    I am really confused and not sure what to do.
    Has anyone experienced something similar and been able to solve the issue?
    Cheers

    I had the same problem, tried several times, including new backups from my 4s. Ended up unplugging the usb cable and plugging it into another port and the phone came on and finished syncing and putting all my apps and info on my new iphone 5.
    2.5 hours of trouble shooting later.
    At least everything is in the right spot, all the data is populated and everything looks great.

  • Iphone 6 won't start up after new update

    iphone 6 won't start up after update, what can I do?

    And it stops at that screen and that is all that shows? Then you need to try and force the device into Recovery Mode and restore. See the instructions in this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Laptop won't turn on after BIOS update

    A few days ago, my 9470m Ultrabook automatically updated its BIOS. This was fine, as it has updated its BIOS before in the past. I went to do some things while it updated, and when I came back, the laptop had turned off. The charge light (the lightning bolt light on the edge of the laptop) was blinking white and amber and did not turn on when I pressed the power button. When I took off the battery, the light stopped blinking, and when I put the battery back in, the light began to blink again, but the laptop still would not turn back on when I pressed the power button. I've tried taking off the battery and plugging in the AC only, but still the light would just blink and the laptop would not turn on when I pressed the power button. I do not know what is wrong. The laptop had been working flawlessly until the BIOS update. Any help would be appreciated.
    Thanks to any support.
    -Daniel

    Hi,
    At first, please try a Hard Reset as follows.
    Performing a hard reset
    Disconnect all peripheral devices and remove all USB devices and SD media cards.
    Disconnect the AC power adapter, remove the battery and then press and hold the power button for at least 15 seconds to drain all residual power and restore default startup settings.
    Reconnect the AC power adapter (but do not insert the battery), press the Power button, look for glowing Light Emitting Diodes (LEDs) near the caps lock and num lock keys, and listen for sounds of a fan or other moving parts turning.
    If the computer starts normally after performing a hard reset, you are done troubleshooting.
    When the Notebook restarts keep tapping the f10 key to enter the bios menu.  Press f5 to load the defaults (this is sometimes f9, but the menu at the bottom will show the correct key), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    I am waiting to hear back from you.
    !------------------- Please click the KUDOS star on the left to say 'Thanks'. Please mark 'Accept as Solution' if it answers/solves your problem. Thank you-----------------------------------------------------------------!
    I am an HP Employee.

Maybe you are looking for

  • How to Sync the session timeout of Portal with CMS Server

    Hi Experts, We have a custom application build on our portal which will launch the reports of InfoView. It works fine untill the portal session timeout. Whenever the session timeout occurs and reloads it I am unable to launch the reports and getting

  • Portal eventing in WD ABAP

    Hello , We have an requirment to pass values from one WD ABAP application iView to another in the Enterprise portal.Is there any configuration that needs be done in WD ABAP or is there any setting in EP that we need to do ?? Rahul

  • Just got a used iPhone...

    My friend gave me his iPhone but now I'm confused of where to go from here. I found how to activate but the old number/information just pops up instead of the activation process...? Help. Where should a go from here? Thanks.

  • DG Broker issue

    Hi Team, Recently I configure data guard and data broker. Data Guard is working fine. When I am switching primary database to another standby , I am getting below error. DGMGRL> switchover to dg1; Performing switchover NOW, please wait... New primary

  • Error while starting NWDS

    Hi,   I am running NWDS 7.31 with JDK 1.6_0_26. While opening NWDS, in error log i am getting an error like... "VariableBlock: Classpath variable with null value: SAP_SYSTEM_ADD_LIBS" Please help... Thanks in Advance, Regards, Alex