HT1349 I tried to download iOS6 to my 3gs and now it won't operate.

serial #:850271MJEDG.

if your phone is recognized on another computer, you should follow these steps:
http://www.apple.com/support/iphone/assistant/itunes/
Good luck

Similar Messages

  • Tried to download iOS 8 but failed and now phone won't go on stuck on plug into I tunes screen

    Trows to download iOS on the laptop but said failed and keeps failing but phone won't do anything now stuck on plug in to I tunes help please

    hey guys I was in the phone to apples for over hour and a half and he couldn't fix it, so I took it to my local stormfront shop and he plugged it in and it restored straight away and had the iOS 8 on it, it's very common he was telling me and sometimes windows interacts with the download for apple updates and causes the phones to go into basically limp mode, best to plug in to an Apple Mac etc

  • Downloaded IO5 to my 3gs and now it wont work

    I just tried to download IO5 to my 3GS and now it wont work, boots up in Japanese or maybe arabic and wont let me do anything, was working OK before the download, Itunes says "no sim card present"
    Please help

    Keep trying. The update server is overloaded. You will eventually get through and your update will continue where it left off.
    I got the error message about 12 times before it finally connected and continued.

  • Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??

    Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??

    bump

  • I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

    I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

    What matters is the version of iPhoto you have on the different machines. Can you tell us what they are, and what exact error message you get.
    Regards
    TD

  • I downloaded IOS6 to my IPad2 and now the screen no longer turns horizontally.  Any solution?

    I downloaded dIOS6 to my IPad2 and now the screen will no longer turn horizontally.  I have to view everything vertically.  Any solution?

    Orientation Lock
    Settings > General > Lock Rotation..
    Or...
    Double-press the home button...
    Swipe to the right until you get to the Portrait Orientation Button...
    Understanding the Side Switch
    http://support.apple.com/kb/HT4085

  • I recently downloaded the new ios 5 software onto my 3gs, and now it won't activate and says 'no sim' on my itunes screen, i know this sim works because it did 30 mins ago and i tried it in other phones since. please help

    I just downloaded ios 5 update to put onto my 3gs, it is now saying i need to activate my phone and not allowing me. the phone screen says server is down, when my internet is fine. and my itunes says there is no sim in the phone, i know the sim works as i tried it in another phone to check, and i have also tried a different sim. please help, how do i activate it?

    Unfortunately, you might have to wait a little bit.  I know how you feel.  I can't live without my phone either.  The activation servers are probably overloaded with everyone trying to update to iOS 7 today.

  • I downloaded ios6 for my iphone and now i cant connect to my itunes on my mac (its an older mac running 10.5.8)

    hey guys, i downloaded the new software for my iphone and now cant connect to my itunes on my mac. its an older mac running 10.5.8

    A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
    iTunes 10.6.3

  • I keep getting a message that itunes incorrectly tried to run the C runtime library and now itunes won't work anyone know how to fix it?

    My computer keeps telling me that itunes tried to incorrectly run the C runtime library and now I can't get into it, I've tried uninstalling and reinstalling it but nothing is working

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Tried to download most recent apple sw upgrades, now PowerBook won't boot

    Hello,
    Last night I wanted to watch a video someone sent in an email (that I watched on my G5 earlier), but my laptop needed latest realplayer, so I downloaded that, installed it. Then apple said I needed to upgrade my operating system, I forget to what (I have 3 macs!)...I downloaded about 5 upgrades, one was the latest OS, one was java, 3 others, wasn't paying close attention. But downloads took a while... Wanted to restart, I said OK.
    When I went to boot up laptop, I'd hear a beep, then pause, then the apple chime, then nothing, black screen! So I tried again, but this time, held power button down, finally, got a white screen w/ this message, in a tiny font up in left corner. I just tried again, and this is the message:
    Apple PowerBook5, 6 4.9 1f3 BootROM built on 07/13/05 at 12:26:00
    Copyright 1994-2005 Apple Computer, Inc.
    All Rights Reserved
    Welcome to Open Firmware, the system time and date is: 12/09/2010 21:12:44
    The battery capacity is: 98 percent
    To continue booting, type "mac-boot" and press return.
    To shut down, type "shut-down" and press return.
    ok
    0 > _
    so I typed mac-boot, and return,
    I finally see gray apple on white screen, round cursor spinning below...then two minutes later, apple changed into a circle w/ a diagonal line through it, and round cursor just spins and spins...
    I just tried again, and the cursor has been spinning for over 10 minutes...
    It is about 5 yrs old, so out of warranty.
    Anyone have any clue what's going on? I've been on macs for almost 10 yrs, and have never run into this before!
    Thanks,
    ~Mary

    You can't download an OS upgrade. Occasionally you'll see an OS update (such as 10.4.2 to 10.4.3) but if you have 10.4.x and an application says you need 10.5 or better, you have to buy the upgrade in a store. Since the PowerBook G4 uses a PowerPC processor, the highest version of the OS you can run is 10.5 Leopard. (10.6 Snow Leopard requires an Intel processor.)
    That being said... no way to know what update you downloaded that caused that problem, but here is a KB article that may help:
    http://support.apple.com/kb/TS1892

  • HT4623 i am an iphone user and i just tried to download theiso6 to my phone and now i can not get no service to my phone. i only can get a message that tells me to connect to itunes too activate but when i try that it says that i have no service.i am a si

    i need help with my iphone activation. after installing ios6 i can not use my phone. it says no service i use a sim card from the bahamas please tell me how i can get this problem solved

    Has your iPhone been jailbroken or modified to work with
    other than the original wireless carrier?

  • I just tried to download latest version of iTunes and now I get Runtime Error (R6034) How do I correct this?

    Error message says that an application has made an attempt to load the C Runtime library incorrectly. 

    Hello DrJMDDC,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    1. Remove iTunes and related components from the Control Panel
    2. Verify iTunes and related components are completely uninstalled
    3. Reinstall iTunes and related components
    Best of luck,
    Mario

  • I tried to download a power teacher app and now my ipad is frozen.

     

    I'm glad you're all set.  If you get a moment, please mark this question answered..........
    never mind.....I see you did mark it answered.

  • I downloaded version 4 this morning and now Firefox won't open. I use XP. It is going in taskmgr but not opening up.

    I have tried everything to get the new 4.0 to open. I did the upgrade this morning and have been working on it all day, When I tried installing it several times FF was running so I closed it down via task mgr. I rebooted.. did everything I could think of. I really don't want to uninstall and lose all my info and settings, along with my add ons. I am defragging now, hoping that might help. I am using Windows XP.

    When I downloaded new stupid version causing crash my system My Norton gone
    after 4 h struggling finally I got it back but only protection I lost my identity safe data witch is very important for me my password can not be verify and I can not fix it I'm so mad I want old version back

  • I downloaded the new InDesign 2014 and now it won't open on my computer. i run on a Windows machine. Has anyone had this happen?

    I really just need to know how to get it to open. I have created files in CC that now won't open, saying they were created in a newer version... which they weren't. i thought the remedy would be to download InDesign 2014, but i can't even get it to open on my computer.  Any advise is welcomed.

    The CC installers often fail to set permissions correctly on the preference folders. Are you getting an error message to that effect?
    If so, find the folders -- they're hidden so you need to set Explorer to show hidden files, then see Replace Your Preferences for the locations of the TWO folders you need to fix. Start at the Adobe level and make sure both your user and System have full control, and apply it to subfolders as well.

Maybe you are looking for

  • How can I jar a set of class files programatically?

    I want to create a jar file, by taking a set of class files from a specific location , can it be done by running any java program?

  • Finding end of file

    hello, i've got a file with a collection of different data types that must be read in, they all are consistent though being long string int long string int long string int ect.ect. my question? how can i find the end of file? in the past i've caught

  • Create a Dealer Locator

    what's the best way to create a database driven dealer locater in DWcs3 - Is spry involved? I'm a newer user of DW - a rookie...

  • Unable to install OX Lion in my HD

    I tried to install OX Lion but I receive a message that my HD (as well as my external drive) "is used for Time Machine backup". [email protected]

  • Built in Isight stopped working on iMac Mtn Lion 10.8.4

    I've got no video on Skype, Facetime, etc. Can't seem to figure out what the issue is. Any ideas?