HT1349 The procedure entry point sqlite3-wal-checkpoint could not be located in the dynamic link library SQLite3.dll

I just downloaded the update (Ver: 10.6.3.25) to ITunes on my HP (windows 7) Laptop, and mow when I start up my computer in get this error message ( The Procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic Library SQJite3.dll ). When I click "ok" the message goes away and seems to work fine. How do I fix???

See if this helps: https://discussions.apple.com/thread/3196615?start=0&tstart=0.

Similar Messages

I am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in teh dynamic link library SQLite3.dll"

I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll" Any ideas what my problem is?

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

The procedure entry point ?NS_SetHasLoadedNewDDLLs@@YAXXZ could not be located in the dynamic link libraryxul.dll.

After years of trouble free use, my Firefox won't open. This message is displayed if any firefox entry point is tried;'The procedure entry point ?NS_SetHasLoadedNewDDLLs@@YAXXZ could not be located in the dynamic link libraryxul.dll.'
It is imperative to retain my bookmarks, therefore I can not uninstall/reinstall.
Can you help?
Thanks,
Trish

Charley33 wrote:
I keep getting this error message when logging in on my laptop

When I boot computer this message comes up--The procedure entry point -objc-int-image could not be located in the dynamic link library objc.dll.

When I boot computer this message comes up--The procedure entry point -objc-int-image could not be located in the dynamic link library objc.dll. I cloud will not open in conrol panel.

At face value, you're having trouble with an Apple Application Support file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
The recently released version of iTunes (11.1.5.5) included an update to Apple Application Support (AAS version 3.0.1). So it might be worth updating your iTunes to see if that helps with the apparent AAS/iCloud issue.

Have tried several times to do all that was suggested BUT itunes still not downloading correctly....still recieving---iTunes.exe - entry point not found - the procedure entry point. AVCFPlayerSppliesMediaSe;ectopmCriteriaAutomaticallKey could not be locat

HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
itunes was not installed correctly. error 7 (windows error 127) --
I have already tried (4 times) completely unstalling and reinstalling as was suggested But didn't fix the problem.
HELP---CAN ANYONE SUGGEST SOMETHING ELSE TO TRY??

HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
That one can be produced if you have an older version of Apple Application Support on the PC than is required by iTunes version 11.1.4.62. (The required version of Apple Application Support is included in the standard iTunes installers, but for some reason it hasn't been updating properly for some folks.)
Let's try updating your Apple Application Support to version 3.0 by doing a standalone Apple Application Support install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, can you launch iTunes without the error now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I can't get my emails because I keep getting the message The Procedure entry point PORT_LoadLibery From Origin could not be located in the dynamic link libery ect

How do I stop getting this message to come up and be able to get my mail. The Procedure entry point PORT_Load Library From Origin could not be located in the dynamic links library
== This happened ==
Every time Firefox opened
== today

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Error msg: the procedure entry point ssl peer certificatechain could not be located in the dynamic link library nss3.dll

hello this is the error message I receive when trying to open my Mozilla browser. a secondary error message appers afterward "could not load XPCOM". please advise, thank you!

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I have downloaded CC because Elements 13 will no longer work only to find out that CC won't work either! The error message is "The procedure entry point crtCreateSymbolic in kW could not be located in the dynamic link library MSVCR110.dll - any thought?!

Can anyone help with the problems starting either Elements 13 or CC? Adobe are aware of the problems but offer no solutions.

Thanks JJ.
Unfortunately it still doesn't work! Maybe I should give up on Adobe products and look for a different photo managing software. Adobe doesn't seem to be interested in offering support of any kind!
Regards
John

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

Why is it that every udate of my iPhone software do I get the error message on my laptop: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll

Each time I update the software on my iPhone4 I get the following error message on my lap top: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll
I go on line to find a solution, but it must be a common problem, why has apple not corrected yet?

This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

Since updating to 10.4 getting error message on startup 'AppleSyncNotifier.exe – Entry Point Not Found, The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'. How do I fix this annoying problem?

Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belle

This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

What do I do when I try to open Fifrefox 4 & get the message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll?

2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.

This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?

Please help

Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

HT1349 The procedure entry point sqlite3-wal-checkpoint could not be located in the dynamic link library SQLite3.dll

Similar Messages

Maybe you are looking for