HT1386 my windows 764 bit says this iphone can not be used the required software is not installed reinstall 64 bit version which i already have

this i phone cannot be used please reinstall 64 bit version
which i have allready i have reinstalled i tunes 6 times and it still does not sync or even recognice or connect my device

smittycdm wrote:
Did you turn off all Windows & other pc-related firewalls, virus and "real-time scanning"? If necessary, d/l all software you need to the desktop and disconnect to prevent any visitors, if you are Level 6 you know all that. But I've found all the problems w/pcs & iphones/itunes have been related to defender, mcafee, etc. And your error message was one I used to get, the other was something about not being authorized even though I was signed in as administrator. Hope that helps, it worked for me.
Thanks for your input.
iTunes has to contact Apple during the sync process, but iTunes can only sync the phone, if you can launch iTunes, which seems not to be the case, as "...the required software is not installed.."
And, even if I have reached level 6, please remember, that not everybody is used to phrases like "d/l" or "w/pcs", especially if your post can have more than 160 letters

Similar Messages

IPhone cannot be used because the required software is not installed.

I had trouble updating my itunes for some time, before I was finally able to delete and uninstall all apple software from my computer (iTunes, Bonjour, mobile support, etc). While using the older version of itunes, my device still synced properly with my library. Today I installed the newest software straight from the apple site. While installing, the same error occurred 3 times, but did not stop the install. Something to do with "cannot access the key, make sure you have access. /component/KLJGDJHEGUY33653GBDHGWH" (random letters/numbers). This occurred while running normally and as an administrator. After the install finished, I was prompted with the "Iphone cannot be used, the required software is not installed, uninstall and reinstall 64-bit." I have done this twice now with the exact same results. What is going on here?

Also, here is the diagnostic I ran with my iPhone connected.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
TOSHIBA Satellite E305
iTunes 10.6.1.7
QuickTime 7.7.2
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 00DCAF5C03322488
Current user is not an administrator.
The current local date and time is 2012-05-27 14:15:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Renesas Electronics USB 3.0 Host Controller. Device is working properly.
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26. Device is working properly.
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod classic running firmware version 2.0.1
Serial Number: 8K842ZYP2C5
iPhone 4S running firmware version 5.1.1
Serial Number: C39GG31WDTFD
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of

When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of itines.) This just started a few weeks ago. I've done a system restore on my computer, deleated and reinstalled the 64-bit itunes several times, did a registery clean, rebooted. Nothing seems to work it will not pick up my phone.

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I plug in my iPhone and this message showed. "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I did this but still not working. Please advise

I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
Please advise what should I do to fix this.

First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

I have the latest 64-bit version of iTunes on Windows 7 Ultimate. Everything was fine until recently. Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message: "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes" I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities. Same message appears when I plug in my iPod. Any help would be greatly appreciated.

Did you try removing and reinstalling all the Apple software using these instructions:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?" Wth...i am using the 64version.

Hi. How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?" Wth...i am using the 64 bit version of itunes. Why does it keep saying that? Will someone Help me please!? This is is getting frustrating. I already had done a full removal of everything! I even removed and deleted my library...then had to put all 500 songs back on one by one. So, i don't have to remove everything again, just to get my ipod to work on here. You, know before the itunes update, my ipod and itunes were working just fine.

wow, that was a quick reply. lol. but i have removed everything. I wasn't even able to get iTunes on my computer for a little while. i kept getting errors on that. Now it's saying that the required software isn't installed. Hmm, could it be referring to Apple Mobile Device Support? That is supposed to be installed with when iTunes gets installed right? I only ask, because that didn't get installed with the itunes setup.

I received this error msg when I wants to sync my 3gs iphone. Please help. "This Iphone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."

I received this errir msg when I wants to sync my 3gs iPhone. And I already update my iTunes to 64-bit. "This iPhone cannot be used because the required software is not installed.Run the iTunes installer to remove iTunes, then install the 64-bit version itunes".

First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

When i connect my ipad to itunes it says "this ipad could not be used because the required software is not insatlled.Run the itunes installer to remove iTunes,then install the 64-bit version of itunes."

When i connect my ipad to itunes it says "this ipad could not be used because the required software is not insatlled.Run the itunes installer to remove iTunes,then install the 64-bit version of itunes." I tried uninstalling and reinstalling itunes. so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work. Plz help. using itunes 11.5 and windows

so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work
Did you get an error message when you did the standalone AMDS install? If so, what does it say? (Precise text, please.)

My iphone not connected to my computer,it shows the message "this iphone can't be used.because the required software is not installed".but i already installed itunes 64 bit...help me

My iphone not connected to my computer,it shows the message "this iphone can't be used.because the required software is not installed".but i already installed itunes 64 bit...help me

does it show up in explore as a camera ?

Windows thinks my itouch is a camera and itunes says this ipod can't be used because the software isn't installed - reinstall itunes. i've done that and continue to get the same error. can someone please help?

windows thinks my itouch is a camera and itunes says this ipod can't be used because the software isn't installed - reinstall itunes. i've done that and continue to get the same error. can someone please help?

(apologies for barging in, lllass.)
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

What the problem when it says This Iphone can not be used because the Apple Mobile device service is not started?

Help, just upgrade the itunes to 10.5 now it says This Iphone can not be used because the Apple mobile device service is not started. I was able to access the it from my second computer without any problem. Phone is running 5.0

http://support.apple.com/kb/ts1567

I have installed itunes but get massage coming up saying cannot be used because required software is not installed, run itunes installer to remove itunes, then install itunes again. I have done this but still not able to connect my iphone, ipad or ipod.

I have installed itunes, but when connecting the iphone, ipad or ipod it states the following:-
Connot be used because required software is not installed run itunes installer to
remove itunes, then install itune again.
I have done this on a number od times, but still having the same message coming up.
Please can you help me.
Kind regards
Caroline Jones

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

"This iPhone cannot be used because the required software is not installed"

Greetings,
I have a problem with my newly purchased iPhone 3G - iTunes will not recognize it, stating that "This iPhone cannot be used because the required software is not installed". Uninstall and reinstall iTunes, it says. I've done that several times, following the instructions for removal here: http://docs.info.apple.com/article.html?artnum=93698
Not working. The iPhone is recognized in Windows, and both the Apple Mobile Device and iPod services are running. I'm running out of options here - I managed to activate the iPhone on another computer, but I need to sync it with my own computer to make it usable.
I am running 32-bit Vista SP1 (fully updated) on a Travelmate 8200 laptop. iTunes version is the latest, obtained from Apple.
Any help would be greatly appreciated, my hair is turning gray over this.

If it were me, I'd make sure to uninstall all 4 of those services mentioned in that link you provided. Then make sure you've downloaded the iTunes package from this link http://www.apple.com/itunes/download/
Make sure you install, and keep installed, everything in that package. In other words don't uninstall anything that the package installs. I don't know this for a fact, but I'm pretty sure that at the very least your system will need both iTunes (most recent version) and QuickTime in order for the new 3G phone to function properly. If you download from the link provided above, you should get the latest version of iTunes and QuickTime. Hope this helps.
Wooops, . If your location requires you to download from another link, then by all means go to it. I just noticed that you're from Sweeden.
Message was edited by: QuickDraw

ITunes says that my iPod cannot be used because the required software is not installed. Says to install 64-bit version. Problem is 64-bit version is installed already.

I have a 64 GB iPod operating on iOS 5.1.1 (says software is up to date). I finally was able to download iTunes 64 Bit to my computer and open it. Now when I connect my iPod to the computer, I get a message saying "This iPod cannot be used because the required software is not installed. Tun the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I have removed iTunes from my computer and downloaded the 64-bit version again and installed it. I still get the same message.

Hi antiklady,
I see that you may be having an issue with compatibility of iTunes when connecting your iOS device. This sort of issue can arise if you have two versions of iTunes installed on your computer, which I feel may be the case. Here is an article that can tell you how to identify the version of iTunes that you have open:
iTunes: How to find which version you are using - Apple Support
http://support.apple.com/en-us/HT201521
If the version of iTunes that is opened is not the version you are required to use for the iOS device in question, try searching through your computer or applications folder to see if there may be two versions of iTunes installed on your computer. Then, uninstall the version that is incompatible using these steps:
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
http://support.apple.com/en-us/HT1923
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Installed 11 64 bit now get "The iPHone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."

Installed iTunes 11 64 bit now get "The iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." Uninstalled and installed twice no help. windows 7 64 bit, iPhone 5 OS 5.1

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

HT1386 my windows 764 bit says this iphone can not be used the required software is not installed reinstall 64 bit version which i already have

Similar Messages

Maybe you are looking for