HT1567 Why do I only have sound through my earphones?  Why is it when I disconnect the earphone I have no sound?

Why do I only have sound through my earphones?  Why is it when I disconnect the earphone I have no sound?

Try plugging your earphones in and remove them again. Do that a few times ... Plugin and uplug ... and see if the sound comes back for the speakers.

Similar Messages

  • I made a purchase in an app.  The app closed and I assumed that the purchase did not go through because it did not appear when I reopened the app, so I "re-purchased it".  I was charged twice, but only received it once.  What can I do?

    I made a purchase in an app.  The app closed and I assumed that the purchase did not go through because it did not appear when I reopened the app, so I "re-purchased it".  I was charged twice, but only received it once.  What can I do?

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • IPod only playing music through one earphone

    My ipod (5th gen) is only playing music through one earphone! Its definitely not the earphones because they work perfectly fine in my iphone. What could the problem be?

    first off try a different set of headphones, just because they work in x doesn't mean they will work in y. Second try cleaning it- blowing in it, compressed air, more than likely there's a piece of lint or dirt stuck in there. reset, update or restore the ipod. at your own risk you could check to see that all internal connections are seated properly as these zif connectors can come loose. if nothing you probably need a new audio jack

  • Why Mac crashes when I run the clean speech ring of osx and then run the RestoreTime Machine?

    Why Mac crashes when I run the clean speech ring of osx and then run the RestoreTime Machine? Could it be that I run restore the setup from a usb drive. I've done thisbefore and when it has not been a problem.
    Does anyone have a good answer on this so I'm happy.

    kjell-einar wrote:
    Why Mac crashes when I run the clean speech ring of osx
    What is that?
    run the RestoreTime Machine?
    What are you restoring? 
    Do you mean a full system restore?  Or something else?
    When does your Mac crash -- during the restore, when you try to start up afterwards, or ?

  • Why do that when we setup the iPhone, appears as the Standard Portuguese Portuguese of Brazil and Portuguese official (European) in brackets?

    Why do that when we setup the iPhone, appears as the Standard PortuguesePortuguese of Brazil and Portuguese official (European) in brackets?
    It's the only thing I hate about Apple. Please change for the Portuguese was invented by the Portuguese, and not by the Brazilians. As the English of England is the official, the Portuguese of Portugal is also the official.

    "Official" according to whom? I don't believe there is a global body that decides which version of a given language is the "real" or definitive version. However, if you wish Apple to know your feelings on the matter, use the appropriate link on the Feedback page:
    http://www.apple.com/feedback
    Apple doesn't participate here.

  • I have a set of 3 USB disk connected to my TC via a USB hud. I usually swithc the TC at night. When I restart the next day it stucks in amber state. when I disconnect the USB hub where my discs connects and restart, it start properly. Any hints?

    I have a set of 3 USB disks connected to my Time capsule (TC) via a USB hub. I usually switch the TC at night. When I restart the next day it stucks in amber state. When I disconnect the USB hub where my discs connects and restart, the TC will start properly. Any hints?

    LOL.. don't switch off the TC.. this is fairly typical behaviour..
    Or try a different usb hub.. but you could well and truly run out of hubs before you fix the problem.
    Are you running latest firmware for your TC?
    What error message is coming up in the airport utility.. amber led is a fault indicator.. look up what the actual fault is and see if it is for instance overloading the usb. You are using a powered hub??
    Get one bigger USB hard disk instead of 3 smaller ones.

  • I have two airport extremes, one acting as amodem and the other operating in bridge mode.  The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable. How do I know if they are operating wired or wirelessly

    I have two airport extremes, one acting as a modem and the other operating in bridge mode.  The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly?  I want to know as I assume I will get much better speeds if they are wired.

    Hi Bob, many thanks for the prompt response.  I think I did what you suggested, but you're the expert so I have sent over a few screenshots.  The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time).  My new home office is going to be in the garden, circa 100 feet from the main house.  I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily.  Everything works well, so I was surprised when I unplugged the ethernet, that it still worked.  I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
    If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly. 
    Many
    Thanks, Greg.

  • There is a little camera icon on a movie clip when I try to import it to iMovie from my iPad. I have reimported several times with the same result. When I disconnect the iPad I can no longer view the clip. Help!

    There is a little camera icon on a movie clip when I try to import it to iMovie from my iPad. I have reimported several times with the same result. When I disconnect the iPad I can no longer view the clip. Help!

    Hi eawaters,
    If you are having issues importing video from your iPad to your Mac for use in iMovie, you may find the following article helpful:
    iOS: Import personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/ht4083
    Regards,
    - Brenden

  • Why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

    why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

    Disasble the computer's security software during the download and update.

  • Why is that when I downloaded the iOS 7 for my iphone 5 that it changed my send and receive for imessages to a random number but my SMS messages are still linked to my phone number?

    Why is that when I downloaded the iOS 7 for my iphone 5 that it changed my send and receive for imessages to a random number but my SMS messages are still linked to my phone number?

    I just encountered this problem for the first time and stumbled upon this forum to find a solution.  I played around with it a bit and it seems that if you slide your finger from the bottom up, you will come upon that new screen that will allow you to do various functions with your phone (put it in airport mode, lock, etc.), you can select your Airport from this screen and play your music wirelessly from your phone; at least this was my experience. Hope this helps!

  • I have a 2nd or 3rd generation iPod touch. Recently, it doesn't recognize headphones and will only play music through it's speakers. I've tried cleaning the area where you plug in the headphones but this has not helped. What should I do?

    My ipod touch (2nd or 3rd generation) won't recognize headphones anymore! I have'nt gotten it wet or dropped it. I've tried cleaning out the plug where you plug the headphones in. I've had no luck. Is this fixable or is it time to trash this iPod?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit
    It i likely not worth getting it fixed if a bad headphone jack

  • Why Nokia C7 When I conect the headphone out the v...

    Hello I have Nokia C7, and my problem is that when I conect the headphones to listen to music, I get as a optional defaul: Hands Free. At the moment is when jumps to the voice command. I give Abandon/Exit, because I want to listen to music but this process is repeated until Iso remove headphones. My questios is how to change the defaul accesory is the headphones or how to fix this problem, I need help, I´m goingcrazy¡¡¡
    Thanks for your help ( please write in Spanish or English)

    See Troubleshooting iPhone Hardware Here
    http://www.apple.com/support/iphone/basics/

  • I only hear music through one earphone

    Excuse me of the bad English.
    When I try to listen to music on my Nokia Lumia 520 only 1 earphone makes sound. My question is why does this happen and what can I do to fix it?

    depends on the issue.
    1. make sure that yo have the headset completely plugged in.
    if that doesnt fix it, then i would go back to where you purchased the device and see if you can exchange the headset as it may be defective.

  • I have a new Aiport Extreme that stopped connecting to internet but broadcasts a good signal. Why then when I disconnect the DSL and plug it into my phone company's router I get internet?

    Only way now I can get internet to work is to use wireless modem provide by phone company. For some reason plugging the DSL ethernet cable into my Mac won't work. My Extreme had been working fine.  Tried powering off/rset. Had phone company check their hard ware.  Even tried with PC.
    It's a mystery.

    Do a full factory reset..
    Set the AE to bridge mode, in full isolation from the network.. set it to create a wireless network.
    Then plug it into the dsl modem again.. which you now have in router mode.

  • My macbook shows a only white screen with apple logo and spinning wheel when i on the power button? How can i correct that?

    Any help!!!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 8
    This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

Maybe you are looking for