HT1695 when I choose Wifi network it goes to IP address instead of allowing me to put the password?

hen I choose Wifi network it goes to IP address instead of allowing me to put the password?

You're tapping the blue button to the right of the network name. Don't, tap anywhere else in the network name. (That's my guess)

Similar Messages

I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me.

I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me....
Thanks in Advance.
Neeraj@iDev

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

TS1398 I am using the wifi network at home but every time I connect I have to put my password to the network. Is there a way to identify this wifi network on my iPad and once it detects it joins directly without having to put my password?????

I am using the wifi network at home but every time I connect I have to my wifi password. Is there a way to have my wifi network per-identified on my iPad and once it's detected the iPad connects to it without having to put my password again???

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Does iTunes match only works on my Iphone 5 when im on wifi network??

Does iTunes match only works on my Iphone 5 when im on wifi network??

Go to Settings > iTunes and App Stores and set to "use cellular data" to ON. Be aware this will use your mobile data allotment when streaming music.

New iPad 2 won't bring up log on pages when I sign on to hotel wifi networks. Is there anyway to "refresh" Safari so it looks for the log on page?

Have had new iPAD 2 for a month now- about 90% of the time it won't sign on to wifi networks that require a log on page - it simply won't bring the log on pages up and I haven't figured out anyway to make it do so - I have tried rebooting, turning wifi on and off, turning the ipad on and off -
I get a strong signal from the wifi network but can't get on the internet - makes the ipad virtually worthless to me. I saw this was a topic of discussion last year with lots of complaints but I can't find any suggestions or solutions. Is this just a terribly defective product?
Any suggestions welcome!

For many systems, you need to use a browser to go to some site. The first site the browser tries to go to, it will be interrupted and a log in page appears. For other sites you need to choose the wifi router in the settings and enter the password.

When extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

when extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

Have you even tried the process in which i have described in my previous post?
Yes, many times. If you are setup to "extend a wireless network, the screen looks like this:
If you click the Wireless Options button, the screen looks like this:
Where is it on this screen that you see a setting to adjust the channel? It sounds like you are confusing "create a wireless network"....which does allow you to adjust channels.....with "exend a wireless network" which does not.
Normally, when you extend a wireless network, AirPort Utility used to always assign the same channel to the extending device. That is no longer the case. It might be the same, or it might be different. You have no control over this, so you have to accept what AirPort Utility thinks is best.

Yosemite 10.10.1 - DNS cache does not clear when switching between WiFi networks

Before updating to Yosemite, DNS caches would clear when switching between WiFi networks, as they should.
For Example, when using an Exchange server, your server name might be something like mail.company.com. Outside of the corporate LAN the IP would resolve to the outside (WAN) address. When you move the laptop inside the corporate LAN, it should clear the cache so mail.company.com resolves to the internal (LAN) address. This is just one example of a dumb DNS transition not taking place switching from outside to inside (and vice versa).
Instead, OS X is holding onto the outside DNS record even when moving to the Corporate LAN. The only way to fix is to run the DNS cache command (which is MUCH more convoluted in Yosemite now), or more easily, to quickly turn off then turn on WiFi.
This is an irritation as I have to perform this action every morning, and every time I come back to my desk from offsite.

Well, clearing the caches is as simple as this, no?
Clear MDNS Cache
sudo discoveryutil mdnsflushcache
Clear UDNS Cache
sudo discoveryutil udnsflushcaches
One other thing: Have you tried 10.10.2? There are many many fixes in 10.10.2 over 10.10.1.

When I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome the b

when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.

Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
You may also want to take a look at the user tip for Facebook problems
LN

I just downloaded an update and my sophos anti-virus is going beserk. It will not allow me to remove the threat when I unlock the quarantine manager and I have no idea of what to do

I just downloaded an update and my sophos anti-virus is going beserk. It will not allow me to remove the threat manually when I unlock the quarantine manager and I have no idea of what to do.

The malware it's finding is probably Windows malware attached to e-mail messages. What are the names of some of those things? Assuming they're not Mac malware, allowing Sophos (or any other anti-virus software) to remove them could cause problems. For example, if they're attached to e-mail, removing them improperly by simply deleting the message file will leave the malware on the e-mail server, and it may very well end up getting re-downloaded when your mail client syncs with the server. It may also corrupt the mailbox.
If you actually ever see a malware name starting with MacOS or OSX (I forget which one Sophos uses), then you will need to worry, and should not assume that the malware can be completely removed by anti-virus software of any kind.

Hi, My network went down earlier in the week. Now it is fine, but my macbook airport no longer detects it and keeps asking for a WAP. When I put the password in, it 'times out'. I'm getting rather fed up.

Hi, My network went down earlier in the week. Now the network is fine, I can connect through the ethernet cable, but my macbook airport no longer detects it, when prompted, macbook will find it, but I get asked for the WAP. When I put the password in, it 'times out'. Prior to the network problem my macbook worked fine everytime. Anyone know the answer?

My guess is all the issues are probably related and fall back to malware.
AVG is probably correct in identifying malware. So I suggest you try some cleaning tools other than Emsisoft .
ones I use (all of them one after the other until I find one that can cope) are;
Roguekiller http://www.adlice.com/softwares/roguekiller/
Malwarebytes anti malware Free http://www.malwarebytes.org/mwb-download/var2/confirm/
ESET online scanner http://www.eset.com/int/home/products/online-scanner/
So first create a clean boot in Windows using Microsoft's instructions https://support.microsoft.com/kb/929135?wa=wsignin1.0 and then run the anti malware applications.
My outside looking in guess is that malware has set itself up as an internet proxy and is is downloading copies of itself and other malware, blocking some mail port as times as downloading more malware is more important, and probably breaking your tivo as well..
Try the malware programs first. If that does not work I will try and talk you through some logging to see what is happening.

I'm trying to transfer data (docs, emails) from G4 iMac running os 10.3.9 to brand new iMac on 10.8.1 I'm stuck, any help greatly appreciated. (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

I'm trying to transfer data (docs, emails) from an old G4 iMac running OS 10.3.9 to brand new iMac on 10.8.1 I'm stuck, any help greatly appreciated. (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

AMoriyama wrote:
I have the old machine backed up onto an external firewire disk but can't hook that up to the new imac as I'm waiting for delivery of a firewire 400/800 adaptor - therefore starting the old machine up as a slave is also subject to the same delay.
I was hoping there might be some way to create a network between the 2 machines (and 2 different versions of the OS) to be able to transfer data across immediately but perhaps I'll just have to wait for my firewire adaptor to arrive.
I don't understand why you're buying a Firewire adaptor, since AFAIK both of your computers have Firewire already built in.
All you need is a firewire cable. Connect the Firewire socket on the old machine to the Firewire socket on your new iMac.
Then start the old machine in Target Mode (i.e. by holding down the T key on its keyboard, while it's starting up, until you see the three-legged T icon hopping around the screen of the old machine.)
At that point you will also see a new icon on the screen of your new iMac. This is the hard drive of your old machine. By clicking on it you can navigate through it any way you like, just as you would normally.
Just drag across whatever you want from the old computer to the new one. This will leave everything on the old computer untouched.
- or use Migration Assistant but in my experience, Migration Assistant isn't very reliable and fails to migrate large amounts of stuff.

When I download using itunes it goes to my computer instead of my ipod nano

When I download using itunes download goes to my computer instead tf myipod nano

On the iPod go to Settings>Store and turnoff automatic downloads. You can also go to iTunes>Preferences>Store and turn it off too.

HT1349 I have tried to restore from an iCloud back up over 4 times on 3 different wifi networks. For hrs, I am waiting only to be told at the last few minutes, Internet connection was lost. This *****. What can I do?

I have tried to restore from an iCloud back up over 4 times on 3 different wifi networks. For hrs, I am waiting only to be told at the last few minutes, Internet connection was lost. This *****. What can I do?

Connect your iPhone to Computer. On iTunes left Pane, under "Devices" right mouse click iPhone and select "Restore from Backup..." then select one of the three backup (Date and Time)

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HT5569 i cant connect to wifi even if i put the password correctly

i cant use wifi i did all network reset i still have a problem connecting to internet even when i put the password correctly

Is this through a home wi-fi router? If so, reset the router by unplugging it for a minute or so, then try again.

HT1695 when I choose Wifi network it goes to IP address instead of allowing me to put the password?

Similar Messages

Maybe you are looking for