HT1926 I have a French computer running on 32 bits instead of 64 (Vista). Reinstalled several times iTunes but keep on having failure 42110!! No download available for 32 bits????
I have a French computer running on 32 bits instead of 64 (Vista).
Reinstalled several times the latest iTunes but keep on having failure 42110!!
No download available for 32 bits???? This is more an Apple support question!!
Try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.
Similar Messages
-
You don't specify what version of NMS you're running, but be sure you install or have installed 4.15p7. Also be sure you're running on NT Service Pack 5 and <i>not</i> NT Service Pack 6.
If the logs don't indicate anything specific, increase the logging level to DEBUG mode and gather more log data.
The user-load would also be of interest to you. That is, is it occuring at 3:00am when four users are logged in or is it only happening between 9:00am and noon when thousands of users are hitting the server?
Also be sure that you've disabled local.store.sharedfolders set to 'off'. Enabling them usually results in 100% cpu usage by the IMAP process, but if it is coupled with another event or problem could lend itself to a crash, too.
But without more information on your environment, log files, events leading up to the crash, etc -- there's o way to answer 'why' at all.
The already suggested reconstruct is a good bet -- especially for IMAP problems if your logs don't indicate anything useful. -
I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times. I keep getting the error message to reinstall to fix the problem.
See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553
-
I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.
Contact Adobe support:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.
Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
I have a new computer with windows 8.1. How do I reinstall Adobe elemnet and premire 10?
If you have the disks you use them to reinstall. If you need to download the programs, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 10:
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l -
My CC update keeps failing on error code 205. I have retried several times and it keeps going to error. I have tried to uninstall CC but I get error that previous update is still running.:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools -
I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!
I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps. -
Tried to update ITunes, but keep getting error: Service "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
So how do I get my ITunes back?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but the Mac would not open it. This system has an ATI Radeon HD 2600 XT 256 MB graphics card. What do I need to do. Do I need a new Card?
David Rosenblatt
<Email Edited By Host>Vista Ultimate 64-bit recognizes 8 cores. 32-bit recognizes one physical cpu.
I've had very little trouble in two years. And now I do like Windows 7 but also eager for the RC.
I've been using the latest Nvidia. There is a method to the madness of how to uninstall/delete and install graphics drivers, or madness in the method. The W7 drivers are easier.
Nope. Something else. More sensitive to disk errors. You aren't running a program to boost fans. Something.
And some AV software is more prone to causing trouble. But all you need is a good AV/malware program, and even Norton AV 2009 is acceptable, or Avast or one of the others.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0 -
I deleted songs in my iphone on the music app but when I sync with the computer the songs disappear. How can I delete songs on my phone but keep them in iTunes?
I use iTunes Match so I can't confirm this on my computer (my Music tab looks different), but as I recall, on the Music tab you have the option to check to sync selected playlists, artists and genres, and then check which playlists you want to sync below that. Then, like songs, you would uncheck the playlists you don't want on your phone and sync to remove them.
-
I have lost my mail application on the dock and in the application folder. Is a download available for osx 10.6?
Possibly installing the big 10.5.8 Combo will bring it back, but first...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
1058 Combo Update, 10.5.8...
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Repair Permissions afterwords, reboot. -
I can't sync music already on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. I've read through all the Help tutorials but none of them say what to do if the sync options don't pop up when you highlight the device. I've already spent way too much time trying to figure this out and it's driving me crazy! Thanks for any help you can offer.
This is correct. It will not show in finder. It is not an external storage device.
The music sync is one way - computer to ipod. The only exception is itunes purchases. Open itunes connect ipod, do not sync, click File>Transfer Purchases -
My itunes won't work on my Windows 7 anymore. I have already uninstalled and reinstalled SEVERAL times, but to no avail. It consistantly freezes, won't open or doesn't work correctly. The only way I can get it to close anymore is to go to the task manager and 'end process' itunes. I do get an error at the beginning saying " the registry settings used by the itunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please re-install itunes." I have searched the internet for possible fixes to no avail. Please help...anyone!
Lets see whether this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working? -
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Is it possible to create a form that allows users to import data from an excel spreadsheet
I have not been able to start my reading on scripting or other livecycle features to be able to try to figure this out but I was wondering if anyone else had ever created a form with this feature or had any ideas of how it would be possible. Our com
-
Details in "ACCOUNT ASSIGNMENT" tab in Shopping cart screen
Hi all, We are on SRM 7.0.1. For each requester,we have the EMPLOYEE role assigned. In shopping cart screen,under account assignment,we want to see the acocunt assignment detailed view as the default view under tab "ACCOUNT ASSIGNMENT".Currently,unde
-
I have a servlet: public class TestDBServlet extends HttpServlet DataSource ds; public void init(ServletConfig config) throws ServletException super.init(config); try Context initCtx = new InitialContext()
-
Hi I am trying to date sort inside for each but it is not working i am using below code <?for-each:G_3?><?sort:BEG_DT;'ascending';data-type='text'?>BEG_DT END_DT <?end for-each?> Can any one please let me know how to solve this? Thanks in Advance Hav
-
Can someone help with my 3D Lighting woes??
I'm having a tough time getting the lighting the way I want it in Acrobat Extended Pro. First off, whenever I try to import a 3D file, with "Lights From File" selected, it ALWAYS defaults to "Headlamp" in acrobat, with "Lights From File" grayed out.