HT201210 ok i have bean stuck on the connect to itunes screen i tried restoring 20 times at least and an error message pops up none of the sugestions apple sugested work can you please help!!!
ok, i have bean stuck on the plug your phone into itunes screen i tried restoring 20 times every time an error poped up. i did all the things apple told e to do but still errors poped up PLEASE HELP
hi Kinney. last hour, i update my ipad 2, then im having the same problems as u. im also hoping people can solve this issue.
Similar Messages
-
i changed my ipod lock screen password and the locked my device (ipod touch 4th generation) and i tried to get back into my ipod to check a message and i had my password wrong i tried as many variations as i could think and it wouldnt accpet any of them. i contacted apple support and went through what i though was the recovery process to recover my ipod and set it back to factory mode and get back to everything and itunes said i was downloading something that i assumed was recovery mode. so now i turned my ipod back on and it still has the password on it and has not reset anything i do not know what i did wrong please help me.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I have an iPad two and my front camera doesn't work I have tried resetting it Clicking it twice nothing works can you please help me!!??
Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider -
I clicked update for facebook And now my iPod touch 4th gen won't let me download the Facebook app I've turned it on and off like 5 times and it still won't work can you please help me
Seems to be an Apple or FB app problem. Nothing you can do but wait for it to be fixed.
-
I am using iphone 3s after updating my phone it is not reading the sim i tried with different sim's but none worked can you please help me
There is no iPhone 3s.
What is displaying on the device?
Has the device ever been hacked or jailbroken? -
Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currently able to see or process his images. Can you please help? thank you!
According to Adobe:
D800
NEF
6.7, 7.1
4.1
D800E
NEF
6.7, 7.1
4.1
The fact that they have 2 versions of ACR means that initial support for the D800 was added in 6.7 but that complete support was finalized in 7.1 (the 4.1 in the chart is for Lightroom)
I'm not sure that this means there are missing features, but rather refinements and optimized settings were added in 7.1
However, ACR 7.1 requires CS6.
As Dag mentioned, you can also use the latest version of DNG Converter to convert the D800 files to DNGs which will be able to be opened in older versions of ACR.
The DNG converter only works on folders of files, not individual files. So just select the folder and convert. All the files in the folder will be converted. -
my phone is stuck on the connect to itunes screen after trying to recover it to a backup.what should i do???
PLEASE HELP!!!Hold down the Home and Power button to shut off the iPhone. Keep it disconnected from the computer. Then, hold down the Home for 20 seconds. Connect it to the computer while continuing to hold down the Home button. Wait for iTunes to say your iPhone is in Recovery mode. Then, restore.
-
I updated my iPhone today over wifi. It downloaded 6.1.3 completely and started then installed it. After the install all it does is show the connect to iTunes screen. What did I do wrong and now do I have to completely restore the phone?
Next question.... I did an iCloud save point earlier today so in theory everything should have been saved and the restore won't be a complete loss right? Please tell me my pics aren't gone.....
Thanks for the help. -
I was attempting to update my iPhone 4 to the new iOS 7.0.4 via my computer after I plugged it in to create a backup copy and something went wrong before it could finish and I recieved an error message. Now my phone is stuck on the "Connect to iTunes screen". I've tried everything to reset & restore my phone with no luck!
I have:
-Restarted my computer
-Updated iTunes to most current version
-Turned phone on and off several times, waiting up to a half hour before turning on (to be greeted directly with apple logo then the connect to iTunes screen)
-Turned on, turned on and held home button (nothing happens)
-My computer is NOT recognizing my device at ALL! But when I plugged my boyfriends iPhone in, it detected it no problem.
I tried calling my phone from the other phone and it goes straight to voicemail. I am super frustrated! Does anybody know what is going on?I was able to restore my phone!!!
I called Apple and they said there was nothing more I could do. I called my carrier Verizon and was able to get my computer to recognize my device after trying this-
Solution:
After trying EVERYTHING this is the ONLY thing that worked-
I took the USB connector cable out of the USB port it was in, and tried another one on the otherside of my laptop and iTunes was able to discover my phone in recovery mode. My phone was reset and everything is fine ( thank gosh for backup copies!) -
My iPad 2 is stuck on the connect to iTunes screen after trying software update
I was updating my software on my iPad 2. Now it is stuck on the connect to iTunes screen. Help!
That is telling you to connect to iTunes on your computer because now you need to restore the device. Something went wrong when you updated. So connect you iPad to your computer's iTunes and restore.
iTunes: Restoring iOS software -
My iPhone 4 stuck in the "connect to iTunes" screen after trying to update to iOS 7
Hey guys.
So i have a pretty big problem here. Today after a little bit of work I updated my iPhone 4 to the new iOS 7. I went to bathroom at some point, while my phone was updating, and when i returned the screen of iPhone showed the "connect to iTunes screen" and no matter what I did, it just stayed there. iTunes doesn't recognize my phone anymore, doesn't matter how many time I plug it in and out. I tried this thing: http://support.apple.com/kb/HT1808 ,but it did not worked. I tried reinstalling my iTunes, but it did not work either. If the little things matter I left "lauch iTunes" box unchecked after reinstallation. Any help apriciated guys, im desperet here.YESSSSSSS HUGE PROBLEM!
Iphone 4 downloaded ios 7 i hit the install button and the phone entered recovery mode and hasnt woke up since, tried tiny umberella and it wont kick it out of recovery mode. Itunes recognizes it in recovery mode, hit update restore, after the update nothing pops up or happens, and right back to square one like i never even updated or restored.
Help pleaseeee -
please help me!!
I have an iPhone 5, just updated software as per itunes notice. the phone is now stuck in the "connect to itunes" mode on the phone, therefore not even started up completly.#
I am going on holiday in 4 hours and need this ............ thanks iphone for screwing it up again -
For the past month or more I've encountered what I consider to be quite a serios problem with my Macbook pro. The laptop suddenly freezes without warning, the screen turns black, while the hard drive apparently stals and the system no longer responds. The only way to resolve this issues is to restart the computer via a hard reset. After restarting, an error message box shows up asking me to report the error, which I've already done on numerous occassions. The problem occurs at a frequency of 1 every 2-3 days, sometimes more often than that. The error message that comes up is very complicated but contains some key words amongst which includes "kernel." This makes me believe that it's an issue with the video card, and was wondering how I can remediate this problem so as to get the normal function of my laptop back. If anyone can be of any help, I would greatly appreciate it.
AndreiFor the past month or more I've encountered what I consider to be quite a serios problem with my Macbook pro. The laptop suddenly freezes without warning, the screen turns black, while the hard drive apparently stals and the system no longer responds. The only way to resolve this issues is to restart the computer via a hard reset. After restarting, an error message box shows up asking me to report the error, which I've already done on numerous occassions. The problem occurs at a frequency of 1 every 2-3 days, sometimes more often than that. The error message that comes up is very complicated but contains some key words amongst which includes "kernel." This makes me believe that it's an issue with the video card, and was wondering how I can remediate this problem so as to get the normal function of my laptop back. If anyone can be of any help, I would greatly appreciate it.
Andrei -
Need help for trying to unfreeze a message on my ical. I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error. All of my info was below the message. I can't get that message to go away or work on the ical now at all. I try to force quit ical and have shut down the computer and it still comes up. Any suggestions?
K,
Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, if you are using Lion, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart.
Next, make sure that you are not connected to the internet. Then to to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as listed above to get to the correct Library Folder. Log out/in, or restart and check iCal for functionality. -
can you help with this question
Thanks for responding but I had already done all before posting my question andI was all up to date and it still said what it said. I have a feeling it is a disk problem, sometjing in my hard drive and I may need a new computer as this one is almost 5 years old and I have had other issues similar to this where a missing disk need to be located and I have had to refragment the computer twice in the past year. I am open to any other suggestions
Maybe you are looking for
-
My iPhone 4 is stuck in recovery mode, help please!
Hi everyone. I've tried every posisble solution from finding answers on here but nothing is working for me. Now here's my story: My iPhone4 is jailbroken and has been for a few months now with no problems. Yesterday I went to make a phone call and af
-
How to use italics,fonts in description under photos in iPhoto
How do I use italics, fonts etc in the description below the photo in iphoto
-
Hi We used between operator for varchar2 column.it is caused any performance problem n query execution. My sql statement is AND gcc_c.segment3 BETWEEN '&&3' AND '&&4' AND gcc_c.segment4 BETWEEN '&&5' AND '&&6' where segment3 and segment4 as varchar2
-
I can't get bonjour to run on my computer. I have tried uninstalling, installing the previous version and downloading bonjour for windows from apple.The service starts normally and is running but the IE plugin shows "bonjour service not available", r
-
Dear All, My client want to keep certain material stock level up to 100. They do not want exceed that level. Pls guide me how to achieve in SAP. Thanks & regards Gitesh