HT201263 I could not reach itunes just pushing home button.  I had to push home and wake/sleep at the same time. in recovery now, not sure if this will work and not happy with messed up ipad

not sure which operating system i am using.  whatever because it messed up my ipad.  Try to follow directions from forum about connecting to store and being in recovery mode.  I was not able to connect just using the home button,  had to use home button and sleep/wake button at the same time.  finally recovering my ipad, but very unhappy that updates messed it up.  If updates are not any good, don't put them out there.

Most likely Digitizer of Front Screen is broken or its Connector to the Logic Board has come loose. You could try a Restore with iTunes on computer. Fix is press connector back to Logic Board. Or, replace entire Front Screen Assembly. Or, take to Apple, if Genius decides it needs Out of Warranty Replacement it is $149 at the Apple Store for iPhone 4.

Similar Messages

  • HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

    So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

    In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
    Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
    Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

  • When in the middle of doing work Firefox just crashes, A sorry window pups up asking if user wants to Reload the same session or start a new session. This never happen with previous versions.

    Since I updated Firefox to the latest version it crashes a lot and although I can reload the session I was working with it is annoying and time consuming. I always keep my computer 100% updated and virus free as I always run Norton. I also have 4 G of RAM and 500 G disk drive so it is not lack of RAM and never keep more that 3 windows open at the same time.

    (1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
    You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
    If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
    (2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
    orange Firefox button (or Tools menu) > Options > Privacy
    * The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
    * The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
    Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

  • HT203167 My previous Iphone broke yesterday, and I had to buy a new one. At the same time my computer failed to dowload my music. Also I have to admit that I have not been good enoght to updated recent paid music. Can you please assit?

    Hello, I need your kind assisance, as I have not been able to get back my music. My previous iphone broke yesterday, and I have to admit that I have not been good at updating my itunes. What do I do? Thank you!

    If you are in a country where iTunes purchased music can be redownloaded, and if it's still in your country's store, then you might be able to redownload it via the Purchased tab in the iTunes store app on your phone (and the Purchased link under Quicklinks on the right-hand side of the iTiunes store homepage on your computer's iTunes). If you aren't in a country where music can be redownloaded then you can try contacting iTunes Support and see if they will grant you a redownload : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Help please:    Newbie.   Just downloaded AE CC 2014.   How to use a camera while at the same time "previewing" a scene?

    When trying to preview a composition in 3d (like you see when people are doing tutorial videos), whenever I click on the preview  (whilst attempting to move the camera around in the scene to preview it), the preview stops  (due to clicking the mouse button).   
    In other words, I cannot play back a preview and manipulate the camera at the same time.   Again, in most tutorials I see online the "teacher" is manipulating the camera while also previewing the scene they are discussing.     I can't do this as every time I click the mouse to manipulate the camera, the preview stops due to the mouse click. 

    Hi Dave...
    I think I may be losing my mind....here it is 2am in the morning.   :  )     
    Your post made me double check what I was looking at, and I think I was wrong.    I was watching a Trapcode Particular video tutorial and perhaps all of the 3D particles in the scene gave me vertigo!    In any event, I think this case can be closed as quickly as it was opened. 
    Cheers

  • My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    OK great info!
    I found 2 possible ethernet to USB adapters:
    By "Plugable":  USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
    2. Apple USB Ethernet Adapter
    Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance.  BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
    One person commented: 
    This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
    Thanks for any additional comments.
    Best regards,
    Steve Schulte
    Sunday 6 January 2013

  • Open 2 iTunes windows at the same time?

    Using iTunes 11.0.4 is there a way to open to Playlist windows at the same time?
    Thanks!!
    Peter

    I know, I know.  iTunes 11 has been a big step back, in my humble opinion.  Had a few issues with iPad & iPod syncing and miss a few 'undocumented features' that I've come to rely on, like multiple windows. 
    Although one thing that has always irritated me is how (which I've submitted an [ignored?] feedback on) the view will reset back to the top/first artist when you are importing a CD ... it means you have to madly scroll through and click on a close-enough artist before iTunes moves on to importing the next track, otherwise the view scrolls back to the top again (I've got almost 28k songs in my library ... not boasting, I just like music).  So it can be quite tedious.
    Would happily revert to iTunes 10.

  • How can I install one app on multiple iPads at the same time?

    We have a volume purchasing account, but when purchasing an app we get multiple serial numbers that all seem to need to be entered individually. The iPhone config Utility will not sync multiple iPads at the same time. Am I missing something? This cannot be the method for mass deployment, it seem too complicated.

    You can do a  backup of you iPad then restore the backup to many devices.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    Mobile Device Management Solutions for iOS
    http://www.apple.com/iphone/business/integration/mdm/
    http://www.apple.com/ipad/business/resources/
    "iOS mobile device management (MDM)
    With an unmatched breadth of features, a Self Service console forover-the-air (OTA) distribution of in-house and app store apps, and integration with Apple's Volume Purchase Plan (VPP), the Casper Suiteallows administrators to easily achieve the four major tenets of iOSmobile device management: Inventory, Configuration, Security Management, and App Distribution."
    http://jamfsoftware.com/products/casper-suite/

  • Can my ipad use wifi and bluetooth at the same time?

    Hi
    I can stream radio via wifi radio apps and play through earphones. I can connect to my bluetooth speaker and play music stored on my ipad ok.
    When I connect up to my bluetooth speaker and try to stream the radio app it plays for a couple of seconds then stops for 20 seconds then plays for 2 seconds and carries on start, stop, start (I guess it's buffering or something?).
    Is it not possible to listen to a radio app and stream it to a bluetooth speaker at the same time?
    Any suggestions welcome

    Thanks for confirming it should work man.
    A quick check of the talktalk forum and it's my talktalk D-link 2780 router. It's a known problem.
    It all works ok on next doors router so Off to PC World for a decent router.
    Thanks again.

  • Is it possible to call a function with the same name from 2 different dll's at the same time.

    I'm trying to call a function ( F ) form 2 different libraries ( A.dll and B.dll ) at the same time. The first lib loaded determines the function F. A->F and B->F have same interface and name but different implementation.

    Hi,
    I tried it with two dll's, both with the same interface, and at the same
    time, in the same VI. The popups even appear at the same time.
    But now I understand the problem... Both dll's are created by LabVIEW! If
    they are not (or one is not, and the other is), this is no problem.
    And VI's in memory cannot have the same name. LabVIEW doesn't care if VI's
    are in a dll or not.
    This might not help, but if you want to make some sort of "plug in" system,
    you might consider using llb's. By loading VI's dynamically, you can select
    the path from which they are loaded. You must unload (close all references)
    one before the loading the other, or the same problem will occur. If you go
    this way, I consider a different approach. Make on
    e library (or even a dll)
    that has the interface you like, this is the "loader". Now make several
    "plug in"'s, with the same interfaces. The name of each function in a plug
    in is a concatenation of the library name and the function name. The loader
    has one extra function, that loads (and unloads, when done) references to
    all desired libraries to use (the names of the functions can be figured out
    easily). All that the loader functions do is dynamically call the library
    functions. You can use a call by reference node for this (you can use the
    connector pane or the loader vi, since the interface must be the same!).
    If you go this way, I guess the loader library can be converted to a dll...
    Hope this helps.
    Wiebe.
    "rsam" wrote in message
    news:[email protected]..
    > Thx Wiebe,
    >
    > did you load both dll at the same time? For example in 1 vi. Somehow
    > the first loaded function keeps to overrule the second. Notice that
    > the interface is
    exactly the same.
    >
    > I loaded 2 dll created in Labview with results described above.
    >
    > Regards Ruud

  • Is it possible to listen to music through bluetooth and be on a call with earbuds at the same time?

    Is it possible to listen to music through bluetooth and be on a call with earbuds at the same time?
    I would like to be able to talk on my iPhone with the EarPods while playing music via Bluetooth in my car.  Are there any third party products that will allow this?

    Sorry,  iOS will pause the music playback when you are on the phone call.  You can set iOS to use bluetooth for your audo playback on your music app, and select the earpods for the phone app, but as soon as you answer the phone call, iOS will pause the music playback.  This is a core OS feature, so you will not find any certified iOS app that will do what you want.
    As a side note, please use extra caution when using your ear pods while driving.  It is not safe as you may not hear emergency vehicles, car horns, railroad crossing bells, etc., and it is illegal in many states (in the US).

  • Lightroom CC issues with multiple export at the same time

    Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
    For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
    TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are started

    Re: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
    Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
    However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
    It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages.

  • Cannot stream to iTunes and join wireless internet at the same time

    I have a home network with an Airport Extreme base station, and Airport Express connected to my home stereo and to my existing wireless network in client mode. I receive internet via a wireless signal throughout my apartment building. My laptop receives the signal via the built-in airport express card. Neither the Airport Extreme or Air Express are connected directly to the internet, since I only have a wireless signal in the building (no ethernet).
    With Airport turned on the wireless internet signal appears as a list of networks alongside my own network.
    I can't seem to get the settings right such that I can join my Home network and be connected to the internet at the same time, since I have to join either one or the other from the drop down list. Therefore, I can't sream music wirelessly from my laptop to my airport express and be connected to the internet at the same time.
    Is there any way around this?
    Powerbook 17"   Mac OS X (10.4.8)  

    Leosia, Welcome to the discussion area!
    Your Mac only has a single radio receiver therefore it can only join one wireless network at a time.

  • I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i c

    I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten

    1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
    2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi.

  • HT1933 Not happy with iTunes app purchase

    Not happy with iTunes app purchase

    By 'not happy' you mean ... ? Whether you might be able to get a refund or credit from iTunes Support depends upon the reason e.g. does the app not work as described, does it abend (have you tried deleting and redownloading it via the Purchased tab in the App Store app on your iPad and contacted the developer ?) ... ?
    If it's not working as described or abends and the developer hasn't replied to you then follow the instructions on the page that you posted from for contacting iTunes Support or use http://reportaproblem.apple.com

Maybe you are looking for

  • Is there a way to create a postscript file in InDesign for a certain page size without a printer?

    I need to set up a postscript file for my book to take it to print but I can set up the print settings for 11 by 17 in. paper. Is there a way to get around this? I am using a mac with cs6.

  • ITunes is supposed to ask you if you want to link libraries if your...

    iTunes is supposed to automatically ask you if you want to link libraries if your iPod's is different my your iTunes. Since iTunes lost my music, I plugged in my iPod expecting to answer no to this message and use a third party to copy all my music b

  • Can I resize partitions in Tiger?

    I'm rethinking my strategy of being able to restore from my TM volume to Leopard. Can I resize partitions using Disk Utility without losing data while in Tiger?

  • Colour shift - how to fix?

    I'm working with an old video clip which features bold yellow text. However, the chroma has shifted slightly to the left giving it a blurred look, with the yellow appearing slightly outside of the text itself. Is there a way to fix this?

  • I cant access my photos

    Everytime i take a photo it takes the photo and you can see the photo going down into the box on the left but when you tey to veiw it it shows that there is nothing there. Also if i just try to go into my photos from the home screen it wont let me it