HT201263 my iphone 5 screen has gone black, and when i plug it into itunes it says we have discovered a iphone in recovery mode, then when i try to restore it it just says waiting for iphone and doesnt get anywhere else. ny clue on how i can fix this prob
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.
I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov
Similar Messages
-
i upgraded my iphone4 to ios 6.0.1 but my phone reset it self and its in recovery mode & every time i try to restore my phone its saying error 2001 or 2006 & my lock button is broken so i cant put my phone in dfu mode what im i suppose to do help me pleas
Hi, to get your iPhone 4 back to normal, here're two ways for you.
1. Use Dr.Fone for iOS. The free trial version can fix iPhone screen of death. The free trial version can do that, you don't have to pay.
Just download and install this software on your computer and connect your iPhone 4 to computer with a USB cable. When it detects your iPhone 4 is abnormal, click Restart the device to get your iPhone 4 to be normal.
2. Use iTunes to fix it.
Step 1. Make sure that the latest iTunes is installed on your computer.
Step 2. Plug into a USB cable to connect your iPhone4 to computer.
Step 3. Press and hold the Home button and the Sleep/Wake button at the same time for about 10s.
Step 4. 10 seconds later, release the sleep/wake button. But continue to hold the home button until a message comes out, saying "iTunes has discovered an iPhone 4 in recovery mode, you must restore this iPhone before it can be used with iTunes".
Step 5. Click your iPhone 4 in the left sidebar to show the device control panel on the right. Then, click Summary.
Step 6. Go to Backups section and click Restore Backup.... In the drop-down list, choose a backup file and restore to your iPhone 4 -
What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!
. . . sparse bundle could not be accessed (error -1)
-
Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as developer to
If you have a beta copy of iOS6
1. You are a developer and will know how to transition from beta
to release version and to use the Develpoer forum
2. You have a pirate copy of the beta and no-one on this Apple hosted Forum can help you
try Google -
my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??
christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702 -
Udating my ipa and the screen has gone black with just the apple logo and an updat bar. I cant turn it on/off.
TRY THIS TRICK.... IT HAS HELPED ME SO MANY TIMES!!!
hold down the power button and the home button for about 6-8 seconds or until the screen goes black.... -
I'm trying to backup my iphone and restore it because the screen has gone black. It won't allow me to do anything without putting in the passcode. I can't put in the passcode because the screen is black.
Try rebooting it (hold home and power together for 15-20 seconds). If the display doesn't come back to life, you're out of luck. You're supposed to back it up before it fails. It's too late to do so after the fact.
-
my iphone4's screen has gone black and i have received a new warrenty
If this is a Verizon iPhone 4, there is no SIM slot.
For non-Verizon iPhone 4, the SIM is on the right side.
Push a paperclip inbto the hole to eject the SIM tray.
-> iPhone and iPad: How to remove the SIM card -
My iphone screen has turned black, phone is still on as screen shots can be taken. When home button and power button are held - no apple icon will appear. Please help??
If this iPhone has had the screen replaced previously, possibly LCD Display connector has simply come loose from the Logic Board. Possibly the LCD Display is faulty and the front screen assembly needs to be replaced. If you have Warranty or AppleCare make Genius reservation or set up service and take or send to Apple. This is handled by Apple with Replacement iPhone 4S.
-
my iphone 4's screen has gone black, like it would if i had turned it off except i have'nt turned it off and i cant turn it on or anything. can anyone help?
Try a reset. Hold down the Sleep/Wake button + Home button for around 10 seconds until the Apple logo appears.
Let me know if this helps.
- Greg -
We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on. Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer. help pls
FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.
-
My ipad screen has gone black and I don't know what to do the screen still works and I can still unlock it and I can still type. But I don't know what to do can anyone help me it will be much appreciated
If the reset doesn't do it then it's possible that the backlight or another part of your screen has broken. Unfortunately it's not really user servicible. I'd make an appointment at your local apple store and have them check it out. If your device is still under warranty and they don't determine that the damage was the result of 'abuse or neglect' (their words) then it could be a free replacement.
I'd just do a backup before you take it in, just in case. -
My iPhone 4S screen has gone black, it is lit but black
Last Night, i was using my 4S which had battery and all of a sudden, it went black, the screen is still lit up but it is black, i tried charging it but nothing happened, pressing buttons does nothing also. When i plugged it into iTunes, the iPhone does not come up but when i unplug it, it tells me that it could not connect with the iPhone, i have not backed it up in a while. is there any way to save my things and fix this? could i leave the battery to die and hope it works?
try a hard reset. press and hold the home and power button at the same time until the apple logo appears. approx 10-15 seconds, see if that works
-
My iphone 4s has gone black and frozen
my iphone 4s has gone black and frozen
Hi WINDSOR154!
Here is an article that will help you troubleshoot this issue with your iPhone:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?
That pretty much eliminates all the user-serviceable parts the phone has.
When you say you purchased a new battery, I'll assume that it included the installation and you did not go fiddling with the nanoscrews and such. So it's got to have some sort of warranty that the part is good and it is time to take it back for service.
Maybe you are looking for
-
Question on "Trusted Functions"
Ref: "JavaScript for Acrobat API Reference," p. 32 & 143-145. I need to allow my JavaScipt to run in a privileged context in order to allow this.mailForm(..) to run without user interaction. The above reference on p. 144 tells me how to "mark a func
-
Let's say we have a server app and several clients, all communicating via items in a Datasocket server. There are two broad mechanisms; the first is to have a single item, and all "packets" have a source and destination ID and are written to and read
-
Auth obj for Tax number 1 and Tax number 2 in fk02
In tocde FK02 and FK03 we want to restrict some of the fields i.e Tax number 1 and Tax number 2 i.e field stdc1 & stdc2 ,to be visible to some users only ,Is there any auth obj for these fields which we could restict to specific users.
-
Deleting rows kills the process!
Hi everybody I've installed Oracle XE 10.2.1.0 in my dev environment: Windows XP and 2 gig RAM. I've loaded about 600k rows in a table, which size is about 90 meg. When I try to delete these rows, the xe instance goes down, propably due to memory usa
-
Once the file is created in RoboHelp (Word to HTML) it looks fine in IE, but its broken in FireFox. My coder looked at it and all of the links and images have backward slashes(\) instead of forward slashes (/) which makes things broken in FireFox. We